HUAWEI-ENT-VOICE-COMMON-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
54

hwEntUserDefineRingTypeTable

table
.1.3.6.1.4.1.2011.5.25.253.2 · 1 row entry · 7 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntUserDefineRingTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-COMMON-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-COMMON-MIB::hwEntUserDefineRingTypeTable' 
This table is used to set the user-defined ring type.
The index of this table is hwEntUserDefineRingType.
hwEntUserDefineRingTypeEntry row .1.3.6.1.4.1.2011.5.25.253.2.1
This table is used to set the user-defined ring type.
The index of this table is hwEntUserDefineRingType.
Indexes
No indexes recorded
Column Syntax OID
hwEntUserDefineRingType
Indicates the index of user-define ring type.
Integer32 .1.3.6.1.4.1.2011.5.25.253.2.1.1
hwEntUserDefineRingFirstRing
Indicates the first ring time length.
0 means to cancel parameter value.
Unit: ms
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.2.1.2
hwEntUserDefineRingFirstInterval
Indicates the first silent time length.
0 means to cancel parameter value.
Unit: ms
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.2.1.3
hwEntUserDefineRingSecondRing
Indicates the second ring time length.
0 means to cancel parameter value.
Unit: ms
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.2.1.4
hwEntUserDefineRingSecondInterval
Indicates the second silent time length.
0 means to cancel parameter value.
Unit: ms
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.2.1.5
hwEntUserDefineRingThirdRing
Indicates the third ring time length.
0 means to cancel parameter value.
Unit: ms
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.2.1.6
hwEntUserDefineRingThirdInterval
Indicates the third silent time length.
0 means to cancel parameter value.
Unit: ms
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.2.1.7

hwEntRingModeTable

table
.1.3.6.1.4.1.2011.5.25.253.3 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntRingModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-COMMON-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-COMMON-MIB::hwEntRingModeTable' 
This table is used to set the ring mode.
The indexes of this table are hwEntRingModeMgId, hwEntRingModeIndex.
hwEntRingModeEntry row .1.3.6.1.4.1.2011.5.25.253.3.1
This table is used to set the ring mode.
The indexes of this entry are hwEntRingModeMgId, hwEntRingModeIndex.
Indexes
No indexes recorded
Column Syntax OID
hwEntRingModeMgId
Indicates the MG ID.
The range of ID from 0 to 16777215 is for AG system, value of 33554431 is only for PBX system and the value input from 16777215 to 33554431 is invalid.
Integer32 .1.3.6.1.4.1.2011.5.25.253.3.1.1
hwEntRingModeIndex
Indicates the ring mode index.
Integer32 .1.3.6.1.4.1.2011.5.25.253.3.1.2
hwEntRingModeName
Indicates the ring mode name.
OctetStringr/w .1.3.6.1.4.1.2011.5.25.253.3.1.3
hwEntRingModeCascadeRingType
Indicates the cadence ringing type.
0: Normal ring 1:4
1: Special ring 1:2
2: Special ring 0.4:0.2:0.4:4
3: Long ring
6: Special ring 1.2:2
8: HK ring 1:3
9: HK CNTRX 0.4:0.2:0.4:0.2:0.4:3.0
10: HK DN-A 0.4:0.2:0…
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.3.1.4
hwEntRingModeInitRingType
Indicates the initial ringing type.
4: Normal ring (FSK) 1:4
17: Special ring (FSK) 1:2
18: Special ring (FSK) 0.4:0.2:0.4:4
22: Special ring (FSK) 1.2:2
24: HK ring (FSK) 1:3
25: HK CNTRX (FSK) 0.4:0.2:0.4:0.2:0.4…
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.3.1.5
hwEntRingModeRowStatus
Indicates the row status (the SIP supports only 4 and 6).
Options:
active(1)
notInService(2)
notReady(3)
createAndGo(4)
createAndWait(5)
destroy(6)
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.253.3.1.6

hwEntDspTemplateTable

table
.1.3.6.1.4.1.2011.5.25.253.6 · 1 row entry · 13 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntDspTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-COMMON-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-COMMON-MIB::hwEntDspTemplateTable' 
This table is used to config the dsp parameters template.
The index of this table is hwEntDspTemplateName.
hwEntDspTemplateEntry row .1.3.6.1.4.1.2011.5.25.253.6.1
This table is used to config the dsp parameters template.
The index of this entry is hwEntDspTemplateName.
Indexes
No indexes recorded
Column Syntax OID
hwEntDspTemplateName
Indicates the dsp parameters template name.
OctetString .1.3.6.1.4.1.2011.5.25.253.6.1.1
hwEntDspEc
Indicates the echo cotrol.
Options:
enable(1) -open
disable(2) -close
globalConfig(255) -using global config
Default: globalConfig(255)
Enumerationr/w .1.3.6.1.4.1.2011.5.25.253.6.1.2
hwEntDspJbMode
Indicates the jitterbuffer mode.
Options:
dynamic(1) -dynamic mode
static(2) -static mode
globalConfig(255) -use global config
Default: globalConfig(255)
Enumerationr/w .1.3.6.1.4.1.2011.5.25.253.6.1.3
hwEntDspNlp
Indicates the NLP mode.
Options:
close(1) -close
normal(2) -normal mode
enhanced(3) -enhanced mode
globalConfig(255) -use global config
Default: globalConfig(255)
Enumerationr/w .1.3.6.1.4.1.2011.5.25.253.6.1.4
hwEntDspWorkMode
Indicates the dsp workmode.
Options:
voice(1) -voice mode
fax(2) -fax mode
modem(3) -modem mode
globalConfig(255) -use global config
Default: globalConfig(255)
Enumerationr/w .1.3.6.1.4.1.2011.5.25.253.6.1.5
hwEntDspSc
Indicates the silence cotrol.
Options:
enable(1) -open
disable(2) -close
globalConfig(255) -use global config
Default: globalConfig(255)
Enumerationr/w .1.3.6.1.4.1.2011.5.25.253.6.1.6
hwEntDspInputGain
Indicates the input gain of DSP chip:
0-15 -correspond to -10 dB to +5 dB
255 -use global config
Default: 255
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.6.1.7
hwEntDspOutputGain
Indicates the output gain of DSP chip:
0-20 -correspond to -10 dB to +10 dB;
255 -use global config
Default: 255.
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.6.1.8
hwEntDspDtmfPara
Indicates the transmission mode of DTMF.
Options:
globalConfig(1) -use global config
nte(2) -nte transmission
erase(3) -erase DTMF
nteWithRedundancy(4) -nte with redundancy
Default: g…
Enumerationr/w .1.3.6.1.4.1.2011.5.25.253.6.1.9
hwEntDspNteForDataevent
Indicates the mode of sending fax/modem event.
Options:
enable(1) -enable NTE for Dataevent
globalConfig(2) -use global config
Default: globalConfig(2)
Enumerationr/w .1.3.6.1.4.1.2011.5.25.253.6.1.10
hwEntDspSpecialFlow
Indicates the dsp special flow.
0: intelligent telephone special flow: filter RTP messages and only processs nte messages
1: intelligent telephone special flow: only processs DTMF events in nte messages
2-254: reserved …
Integer32r/w .1.3.6.1.4.1.2011.5.25.253.6.1.11
hwEntDspRedundancyForVbd
Flag of locally starting the redundancy VBD function.
Options:
globalConfig(1) -use global config
enable(2) -enable redundancy for vbd
Default: globalConfig(1)
Enumerationr/w .1.3.6.1.4.1.2011.5.25.253.6.1.12
hwEntDspTemplateRowStatus
Indicates the row status.
Options:
active(1)
notInService(2)
notReady(3)
createAndGo(4)
createAndWait(5)
destroy(6)
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.253.6.1.13

hwEntServiceNumTable

table
.1.3.6.1.4.1.2011.5.25.253.7 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntServiceNumTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-COMMON-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-COMMON-MIB::hwEntServiceNumTable' 
This table is used to config the binding between service number and DSP parameters template.
The index of this table is hwEntServiceNumMap.
hwEntServiceNumEntry row .1.3.6.1.4.1.2011.5.25.253.7.1
This table is used to config the binding between service number and DSP parameters template.
The index of this entry is hwEntServiceNumMap.
Indexes
No indexes recorded
Column Syntax OID
hwEntServiceNumMap
Indicates the service number digital map.
OctetString .1.3.6.1.4.1.2011.5.25.253.7.1.1
hwEntServiceNumDspTemplate
Indicates the dsp parameters template name
OctetStringr/w .1.3.6.1.4.1.2011.5.25.253.7.1.2
hwEntServiceNumRowStatus
Indicates the row status.
Options:
active(1)
notInService(2)
notReady(3)
createAndGo(4)
createAndWait(5)
destroy(6)
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.253.7.1.3

hwEntDspOperTable

table
.1.3.6.1.4.1.2011.5.25.253.8 · 1 row entry · 17 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntDspOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-COMMON-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-COMMON-MIB::hwEntDspOperTable' 
This table is used to config the operation of DSP channel.
The index of this table are hwEntDspDimmIndex, hwEntDspChannelIndex.
hwEntDspOperEntry row .1.3.6.1.4.1.2011.5.25.253.8.1
This table is used to config the operation of DSP channel.
The index of this entry are hwEntDspDimmIndex, hwEntDspChannelIndex.
Indexes
No indexes recorded
Column Syntax OID
hwEntDspDimmIndex
Indicates the slotid/dsp index.
bits 16-31 (16 bits): reserved
bits 8-15 (8 bits): slotid index
bits 0-7 (8 bits): dsp index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.8.1.1
hwEntDspChannelIndex
Indicates the DSP channel index.
bits 8-31 (24 bits): reserved
bits 0-7 (8 bits): channel index
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.8.1.2
hwEntDspOperChannelState
Indicates the channel state.
Options:
idle(1)
busy(2)
wastage(3)
fault(4)
prohibit(5)
pcmLoopback(6)
ipLoopback(7)
Enumeration .1.3.6.1.4.1.2011.5.25.253.8.1.3
hwEntDspOperAdminStatus
Indicates the operation type.
Options:
prohibit(1) -prohibit
unprohibit(2) -unprohibit
pcmLoopback(3) -PCM loopback
ipLoopback(4) -IP loopback
noLoopback(5) -cancel loopback
Enumerationr/w .1.3.6.1.4.1.2011.5.25.253.8.1.4
hwEntDspOperCodec
Indicates the codec of DSP.
Options:
g711a(1)
g711u(2)
g723(3)
g729(4)
g726by16k(5)
g726by24k(6)
g726by32k(7)
g726by40k(8)
g722(9)
null(255)
Enumeration .1.3.6.1.4.1.2011.5.25.253.8.1.5
hwEntDspOperPacketInterval
Indicates the packet interval of DSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.8.1.6
hwEntDspOperJitterBufferMode
Indicates the jitter buffer mode of DSP.
Options:
dynamic(1)
static(2)
null(255)
Enumeration .1.3.6.1.4.1.2011.5.25.253.8.1.7
hwEntDspOperMinJitterBuffer
Indicates the minimum jitterbuffer of DSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.8.1.8
hwEntDspOperMaxJitterBuffer
Indicates the maximum jitterbuffer of DSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.8.1.9
hwEntDspOperInitJitterBuffer
Indicates the initial jitterbuffer of DSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.8.1.10
hwEntDspOperVAD
Indicates the switch state of VAD.
Options:
enable(1)
disable(2)
null(255)
Enumeration .1.3.6.1.4.1.2011.5.25.253.8.1.11
hwEntDspOperEC
Indicates the switch state of echo cancellation.
Options:
enable(1)
disable(2)
null(255)
Enumeration .1.3.6.1.4.1.2011.5.25.253.8.1.12
hwEntDspOperGainOut
Indicates the output gain of DSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.8.1.13
hwEntDspOperGainIn
Indicates the input gain of DSP.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.8.1.14
hwEntDspOprJBInPercent
Indicates the current fill level of the jitterbuffer in percent.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.8.1.15
hwEntDspOprIpSideMix
Indicates the IP side mix state of DSP.
Options:
noState(1)
yesState(2)
Enumeration .1.3.6.1.4.1.2011.5.25.253.8.1.16
hwEntDspOprPcmSideMix
Indicates the PCM side mix state of DSP.
Options:
noState(1)
yesState(2)
Enumeration .1.3.6.1.4.1.2011.5.25.253.8.1.17

hwEntDspStatisticsTable

table
.1.3.6.1.4.1.2011.5.25.253.9 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwEntDspStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ENT-VOICE-COMMON-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ENT-VOICE-COMMON-MIB::hwEntDspStatisticsTable' 
This table is used to query the DSP channel statistics.
The index of this table is hwEntDspDimmIndex.
hwEntDspStatisticsEntry row .1.3.6.1.4.1.2011.5.25.253.9.1
This table is used to query the DSP channel statistics.
The index of this entry is hwEntDspDimmIndex.
Indexes
No indexes recorded
Column Syntax OID
hwEntDspStatisticsTotalNum
Indicates the total number of DSP channels.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.9.1.1
hwEntDspStatisticsFreeNum
Indicates the number of idle channels.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.9.1.2
hwEntDspStatisticsG711Num
Indicates the number of occupied DSP channels of the G.711.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.9.1.3
hwEntDspStatisticsAllNum
Indicates the number of occupied DSP channels of the full rate.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.9.1.4
hwEntDspStatisticsWastageNum
Indicates the number of DSP channels of the wastage.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.9.1.5
hwEntDspStatisticsFaultNum
Indicates the number of faulty DSP channels.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.9.1.6
hwEntDspStatisticsLoopNum
Indicates the number of DSP channels in the loopback.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.9.1.7
hwEntDspStatisticsForbiddenNum
Indicates the number of prohibited DSP channels.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.253.9.1.8