 hwCGNRoutingTableAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.1 | Description. |
hwCGNInstanceDiscardNumAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.10 | Description. |
hwCGNGloablV4SessionNumResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.11 | The object indicates the alarm generated when the number of IPV4 sessions exceeds a specified threshold on a NAT/DS-Lite/NAT64 board. |
hwCGNUserPortNumResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.12 | The object indicates the clear alarm generated when CGN user port usage falls to a normal range. |
hwCGNPortUsageOfSpecificIpResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.13 | Description. |
hwCGNPortUsageOfSpecificIpPreAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.14 | The object indicates the alarm generated when the number of pre-allocated ports based on a public network address pool reaches a specified threshold. |
hwCGNPortUsageOfSpecificIpPreResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.15 | The object indicates the clear alarm generated when the number pre-allocated ports based on a public network address pool falls to a normal range. |
hwCGNStaticMappingCopyConfigEvent
| .1.3.6.1.4.1.2011.5.25.240.2.16 | Description. |
hwCGNStaticMappingReadConfigEvent
| .1.3.6.1.4.1.2011.5.25.240.2.17 | Description. |
hwCGNDeviceSessionNumAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.18 | Description. |
hwCGNDeviceSessionNumResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.19 | Description. |
hwCGNGloablV4SessionNumAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.2 | The object indicates the alarm generated when the total number of session connections exceeds a specified threshold. |
hwCGNUserPortExhaustAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.20 | User port exhaust alarm. |
hwCGNUserPortExhaustResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.21 | User port exhaust resume alarm. |
hwCGNSessionExhaustAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.22 | The object indicates the alarm generated when system session connections are used up. |
hwCGNSessionExhaustResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.23 | The object indicates the alarm generated when the session connections become available again. |
hwCGNSpecificIpExhaustAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.24 | The object indicates the alarm generated when ports in a public address pool are used up. |
hwCGNSpecificIpExhaustResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.25 | The object indicates the clear alarm generated when the ports in a public address pool become available again. |
hwCGNUserIPNumAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.26 | The object indicates the alarm generated when usage of the NAT64 no-PAT address pool reaches a specified threshold. |
hwCGNUserIPNumResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.27 | The object indicates the clear alarm generated when usage of the NAT64 no-PAT address pool falls to a normal range. |
hwCGNNoPatAddrGroupExhaustAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.28 | The object indicates the alarm generated when addresses in a no-PAT address pool are used up. |
hwCGNNoPatAddrGroupExhaustResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.29 | The object indicates the clear alarm generated when addresses in a no-PAT address pool become available again. |
hwCGNUserSessionNumAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.3 | Description. |
hwCGNNoPatAddrGroupThresholdAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.30 | The object indicates the alarm generated when address usage of the no-PAT address pool reaches a specified alarm threshold. |
hwCGNNoPatAddrGroupThresholdResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.31 | The object indicates the clear alarm generated when no-PAT of IP addresses in the address pool usage reaches a specified threshold is cleared. |
hwCGNAccessLimitThresholdAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.32 | The number of access-users reach the threshold |
hwCGNAccessLimitThresholdResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.33 | The number of access-users within normal range |
hwCGNAccessLimitExhaustAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.34 | The access-users exhaust alarm |
hwCGNAccessLimitExhaustResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.35 | The access-users exhaust resume alarm |
hwCGNUserTableExhaustAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.36 | The object indicates the alarm generated when user tables are used up. |
hwCGNUserTableExhaustResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.37 | The object indicates the clear alarm generated when user tables become available again. |
hwCGNUserTableThresholdAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.38 | The object indicates the alarm generated when the number of created user tables reaches a specified threshold. |
hwCGNUserTableThresholdResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.39 | The object indicates the clear alarm generated when the number of user tables falls to a normal range. |
hwCGNUserPortNumAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.4 | The object indicates the alarm generated when user port usage exceeds a specified threshold. |
hwVSUDevicePerformanceAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.40 | The object indicates the alarm generated when CPU forwarding performance exceeds a specified threshold. |
hwVSUDevicePerformanceResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.41 | The object indicates the clear alarm generated when CPU performance is restored. |
hwCGNGlobalPoolPreAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.42 | The object indicates the alarm generated when IP address usage of the global public IP address pool reaches a specified threshold. |
hwCGNGlobalPoolPreResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.43 | The object indicates the clear alarm generated when IP address usage of the global public IP address pool falls to a normal range. |
hwCGNGlobalPoolExhaustAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.44 | The object indicates the alarm generated when IP addresses in the global public network address pool are used up. |
hwCGNGlobalPoolExhaustResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.45 | The object indicates the clear alarm generated when IP addresses in the global public network address pool become available. |
hwCGNDAPPoolApplyFail
| .1.3.6.1.4.1.2011.5.25.240.2.46 | Fail to apply for the subnet. |
hwCGNDAPPoolReleaseFail
| .1.3.6.1.4.1.2011.5.25.240.2.47 | Fail to release the subnet. |
hwCGNDAPPoolSubnetFull
| .1.3.6.1.4.1.2011.5.25.240.2.48 | The number of subnet in the IP global pool is exhausted. |
| hwCGNDAPDeviceSubnetFull | .1.3.6.1.4.1.2011.5.25.240.2.49 | The number of subnet in the device is exhausted. |
hwCGNPortforwardingAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.5 | Description. |
hwCGNInstanceDAPPoolApplyFail
| .1.3.6.1.4.1.2011.5.25.240.2.50 | The object indicates the alarm generated when an attempt to apply for an address range in a global address pool fails. |
hwCGNInstanceDAPPoolSubnetFull
| .1.3.6.1.4.1.2011.5.25.240.2.51 | The number of subnet in the IP pool is exhausted. |
hwCGNSessionSpecOverloadAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.52 | Session spec overload alarm. |
hwCGNSessionSpecOverloadResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.53 | Session spec overload resume alarm. |
hwCGNGloablV4SessionNumBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.54 | The object indicates the alarm generated when the total number of session connections exceeds a specified threshold. |
hwCGNGloablV4SessionNumBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.55 | The object indicates the clear alarm generated when the total number of session connections is restored. |
hwCGNSessionExhaustBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.56 | The object indicates the alarm generated when system session connections are used up. |
hwCGNSessionExhaustBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.57 | The object indicates the alarm generated when the session connections become available again. |
hwCGNNoPatAddrGroupExhaustBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.58 | The object indicates the alarm generated when addresses in a no-PAT address pool are used up. |
hwCGNNoPatAddrGroupExhaustBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.59 | Addresses in the no-pat public address pool became available |
| hwCGNDsliteTunnelNumAlarm | .1.3.6.1.4.1.2011.5.25.240.2.6 | Description. |
hwCGNNoPatAddrGroupThresholdBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.60 | The object indicates the clear alarm generated when addresses in a no-PAT address pool become available again. |
hwCGNNoPatAddrGroupThresholdBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.61 | The object indicates the clear alarm generated when no-PAT of IP addresses in the address pool usage reaches a specified threshold is cleared. |
hwCGNPortUsageOfSpecificIpPreBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.62 | The object indicates the alarm generated when the number of pre-allocated ports based on a public network address pool reaches a specified threshold. |
hwCGNPortUsageOfSpecificIpPreBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.63 | The object indicates the clear alarm generated when the number pre-allocated ports based on a public network address pool falls to a normal range. |
hwCGNSpecificIpExhaustBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.64 | The object indicates the alarm generated when ports in a public address pool are used up. |
hwCGNSpecificIpExhaustBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.65 | The object indicates the clear alarm generated when the ports in a public address pool become available again. |
hwCGNUserPortNumBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.66 | The object indicates the alarm generated when port usage of CGN users exceeds a specified threshold. |
hwCGNUserPortNumBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.67 | The object indicates the clear alarm generated when CGN user port usage falls to a normal range. |
hwCGNUserTableExhaustBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.68 | The object indicates the alarm generated when user tables are used up. |
hwCGNUserTableExhaustBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.69 | The object indicates the clear alarm generated when user tables become available again. |
hwCGNPortUsageOfAddrGroupAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.7 | Description. |
hwCGNUserTableThresholdBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.70 | The object indicates the alarm generated when the number of created user tables reaches a specified threshold. |
hwCGNUserTableThresholdBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.71 | The object indicates the clear alarm generated when the number of user tables falls to a normal range. |
hwVSUDevicePerformanceBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.72 | The object indicates the alarm generated when CPU forwarding performance exceeds a specified threshold. |
hwVSUDevicePerformanceBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.73 | The object indicates the clear alarm generated when CPU performance is restored. |
hwCGNRadiusSpecificAddressUserNumFullAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.76 | The number of radius-specific-address users reaches the upper limit. |
hwCGNRadiusSpecificAddressUserNumFullResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.77 | The number of radius-specific-address users is lower than the upper limit. |
hwVSUDevicePerformanceExhaustAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.78 | The object indicates the alarm generated when CPU forwarding performance is used up. |
hwVSUDevicePerformanceExhaustResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.79 | The object indicates the clear alarm generated when CPU forwarding performance becomes available. |
hwCGNPortUsageOfSpecificIpAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.8 | Description. |
hwCGNUserIPNumBoardAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.80 | The object indicates the alarm generated when address usage of NAT64 no-PAT address pool reaches a specified threshold in a virtual cluster scenario. |
hwCGNUserIPNumBoardResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.81 | The object indicates the clear alarm generated when address usage of NAT64 no-PAT address pool falls to a normal range in a virtual cluster scenario. |
hwCGNServerMapNumThresholdAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.82 | The object indicates the alarm generated when server-map usage reaches a specified threshold. |
hwCGNServerMapNumThresholdResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.83 | The object indicates the clear alarm generated when server-map usage falls to a normal range. |
hwCGNServerMapNumExhaustAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.84 | The object indicates the alarm generated when server-map entries are used up. |
hwCGNServerMapNumExhaustResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.85 | The object indicates the clear alarm generated when server-map entries become available again. |
hwVSUServiceFaultAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.86 | The object indicates the alarm generated when a VSU service fails. |
hwVSUServiceFaultResumeAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.87 | The object indicates the clear alarm generated when a VSU service becomes available again. |
hwCGNGlobalPoolReleaseFail
| .1.3.6.1.4.1.2011.5.25.240.2.88 | Fail to release the subnet. |
hwCGNDAPBackupConfigInconsistent
| .1.3.6.1.4.1.2011.5.25.240.2.89 | The global address pool configurations of the master and backup devices are inconsistent. |
hwCGNUserDiscardNumAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.9 | Description. |
hwCGNDAPUPCPConfigInconsistent
| .1.3.6.1.4.1.2011.5.25.240.2.90 | The configuration of the local-up-id of the global address pool is inconsistent with the effective UPID on the CP. |
hwCGNDAPPoolSectionSyncFail
| .1.3.6.1.4.1.2011.5.25.240.2.91 | The peer processing failed during the synchronization of address sections of the global address pool. |
hwMAPBoardNotSupportAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.92 | The board does not support MAP. |
hwMAPBoardNotSupportResume
| .1.3.6.1.4.1.2011.5.25.240.2.93 | The alarm was cleared because the board that does not support MAP was removed or the MAP configuration was deleted from the board. |
hwVSMBoardNotSupportAlarm
| .1.3.6.1.4.1.2011.5.25.240.2.94 | The board does not support this function. |
hwVSMBoardNotSupportResume
| .1.3.6.1.4.1.2011.5.25.240.2.95 | The alarm was cleared because the board that does not support this function was removed or this function configuration was deleted from the board. |
RowStatus
hwDsliteMIB 
hwDslitePathmtuEnable 
hwDsliteInstanceSessionLimitTable 
hwDsliteInstanceSessionLimitEntry 
hwSessionLimitInstanceName