HUAWEI-DLDP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hwDldpPortTable

table

.1.3.6.1.4.1.2011.5.25.173.1.1.9 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwDldpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DLDP-MIB::hwDldpPortTable'

DLDP port configuration table.

hwDldpPortEntry row .1.3.6.1.4.1.2011.5.25.173.1.1.9.1

Entries of the DLDP port configuration table.

Indexes

hwDldpPortIndex

Column Syntax OID

hwDldpPortIndex

It describes enabled DLDP port index. Each port is uniquely identified by a port number. It ranges from 0
to 575.

PortIndex

Type Constraints:
range: 0..575

.1.3.6.1.4.1.2011.5.25.173.1.1.9.1.1

hwDldpPortStateReset

It describes the DLDP status of the reset port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.173.1.1.9.1.2

hwDldpPortState

Port state has eight states, including initial, inactive, active,
advertisement, probe, disable, delayDown, and loop.

Enumeration

Enumerated Values:

1	initial
2	inactive
3	active
4	advertisement
5	probe
6	disable
7	delayDown
8	loop

.1.3.6.1.4.1.2011.5.25.173.1.1.9.1.3

hwDldpPortLinkState

Port state has two modes, including up and down.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.2011.5.25.173.1.1.9.1.4

hwDldpResetStatistics

It clears the statistics of packets received and sent on the current
port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.173.1.1.9.1.5

hwDldpRowStatus

Operation of CreateAndGo can be
used to create a new instance, and operation of Destroy be
used to destroy an existent index. But these operations
will not take effect if they are not activated by running the
command …

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.2011.5.25.173.1.1.9.1.6

hwDldpNeighbourTable

table

.1.3.6.1.4.1.2011.5.25.173.1.1.10 · 1 row entry · 5 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwDldpNeighbourTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DLDP-MIB::hwDldpNeighbourTable'

DLDP Neighbour configuration table.

hwDldpNeighbourEntry row .1.3.6.1.4.1.2011.5.25.173.1.1.10.1

Entries of the DLDP Neighbour configuration table.

Indexes

hwDldpPortIndex hwDldpNeighbourMacAddr hwDldpNeighbourPortIndex

Column Syntax OID

hwDldpNeighbourMacAddr

When the activated port detects a neighbor, it can record the neighbor information, including
MAC address of neighbor. The port may detect multiple neighbors.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.2011.5.25.173.1.1.10.1.1

hwDldpNeighbourPortIndex

When the activated port detects a neighbor, it can record the port index of the neighbour.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.5.25.173.1.1.10.1.2

hwDldpNeighbourPortName

When the activated port detects a neighbor, it can record the port name of the neighbour.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.25.173.1.1.10.1.3

hwDldpNeighbourState

When the activated port detects a neighbor, it can record the state of the neighbour, and its value includes unknown, one way, and two way.

Enumeration

Enumerated Values:

1	unknown
2	oneWay
3	twoWay

.1.3.6.1.4.1.2011.5.25.173.1.1.10.1.4

hwDldpNeighbourAgeTime

When the activated port detects a neighbor, it can record the aging time of the neighbor. The aging time
is three times the interval for sending advertisement packets.

Integer32

Constraints:
range: 3-300

.1.3.6.1.4.1.2011.5.25.173.1.1.10.1.5

hwDldpIfTable

table

.1.3.6.1.4.1.2011.5.25.173.1.1.11 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwDldpIfTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DLDP-MIB::hwDldpIfTable'

DLDP interface configuration table.

hwDldpIfEntry row .1.3.6.1.4.1.2011.5.25.173.1.1.11.1

Entries of the DLDP interface configuration table.

Indexes

hwDldpIfIndex

Column Syntax OID

hwDldpIfIndex

It describes enabled DLDP interface index. Each port is uniquely identified by a port number. It ranges from 0
to 62535.

IF-MIBInterfaceIndex

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.2011.5.25.173.1.1.11.1.1

hwDldpIfStateReset

It describes the DLDP status of the reset port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.173.1.1.11.1.2

hwDldpIfState

Port state has eight states, including initial, inactive, active,
advertisement, probe, disable, delayDown, and loop.

Enumeration

Enumerated Values:

1	initial
2	inactive
3	active
4	advertisement
5	probe
6	disable
7	delayDown
8	loop

.1.3.6.1.4.1.2011.5.25.173.1.1.11.1.3

hwDldpIfLinkState

Port state has two modes, including up and down.

Enumeration

Enumerated Values:

1	up
2	down

.1.3.6.1.4.1.2011.5.25.173.1.1.11.1.4

hwDldpIfResetStatistics

It clears the statistics of packets received and sent on the current
port.

SNMPv2-TCTruthValuer/w

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.2011.5.25.173.1.1.11.1.5

hwDldpIfRowStatus

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.2011.5.25.173.1.1.11.1.6

hwDldpIfNeighbourTable

table

.1.3.6.1.4.1.2011.5.25.173.1.1.12 · 1 row entry · 5 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwDldpIfNeighbourTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DLDP-MIB::hwDldpIfNeighbourTable'

DLDP Neighbour configuration table.

hwDldpIfNeighbourEntry row .1.3.6.1.4.1.2011.5.25.173.1.1.12.1

Entries of the DLDP Neighbour configuration table.

Indexes

hwDldpIfIndex hwDldpIfNeighbourMacAddr hwDldpIfNeighbourIfIndex

Column Syntax OID

hwDldpIfNeighbourMacAddr

When the activated port detects a neighbor, it can record the neighbor information, including
MAC address of neighbor. The port may detect multiple neighbors.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.2011.5.25.173.1.1.12.1.1

hwDldpIfNeighbourIfIndex

When the activated port detects a neighbor, it can record the port index of the neighbour.

Integer32

Constraints:
range: 0-65535

.1.3.6.1.4.1.2011.5.25.173.1.1.12.1.2

hwDldpIfNeighbourPortName

When the activated port detects a neighbor, it can record the port name of the neighbour.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.2011.5.25.173.1.1.12.1.3

hwDldpIfNeighbourState

When the activated port detects a neighbor, it can record the state of the neighbour, and its value includes unknown, one way, and two way.

Enumeration

Enumerated Values:

1	unknown
2	oneWay
3	twoWay

.1.3.6.1.4.1.2011.5.25.173.1.1.12.1.4

hwDldpIfNeighbourAgeTime

When the activated port detects a neighbor, it can record the aging time of the neighbor. The aging time
is three times the interval for sending advertisement packets.

Integer32

Constraints:
range: 3-300

.1.3.6.1.4.1.2011.5.25.173.1.1.12.1.5

hwDldpPortStatisticsTable

table

.1.3.6.1.4.1.2011.5.25.173.1.2.1 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwDldpPortStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DLDP-MIB::hwDldpPortStatisticsTable'

DLDP port statics configuration table.

hwDldpPortStatisticsEntry row .1.3.6.1.4.1.2011.5.25.173.1.2.1.1

Entries of the table of the packets sent or received on the DLDP port.

Indexes

hwDldpPortIndex

Column	Syntax	OID
hwDldpPortStatisticsTx It describes the number of packets sent on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.1.1.1`
hwDldpPortStatisticsRxTotal It describes the number of packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.1.1.2`
hwDldpPortStatisticsRxError It describes the number of error packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.1.1.3`
hwDldpPortStatisticsRxLoop It describes the number of loop packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.1.1.4`
hwDldpPortStatisticsRxValid It describes the number of valid packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.1.1.5`
hwDldpPortStatisticsRxAuthenFail It describes the number of authentication failure packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.1.1.6`

hwDldpIfStatisticsTable

table

.1.3.6.1.4.1.2011.5.25.173.1.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the huawei variant from /opt/observium/mibs/huawei.

Command help

Walk hwDldpIfStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-DLDP-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-DLDP-MIB::hwDldpIfStatisticsTable'

DLDP port statics configuration table.

hwDldpIfStatisticsEntry row .1.3.6.1.4.1.2011.5.25.173.1.2.2.1

Entries of the table of the packets sent or received on the DLDP port.

Indexes

hwDldpIfIndex

Column	Syntax	OID
hwDldpIfStatisticsTx It describes the number of packets sent on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.2.1.1`
hwDldpIfStatisticsRxTotal It describes the number of packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.2.1.2`
hwDldpIfStatisticsRxError It describes the number of error packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.2.1.3`
hwDldpIfStatisticsRxLoop It describes the number of loop packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.2.1.4`
hwDldpIfStatisticsRxValid It describes the number of valid packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.2.1.5`
hwDldpIfStatisticsRxAuthenFail It describes the number of authentication failure packets received on the activated port.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.2011.5.25.173.1.2.2.1.6`