HUAWEI-CES-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
15
Rows
15
Columns
108

hwAtmCesServDescrExtTable

table
.1.3.6.1.4.1.2011.5.11.1 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesServDescrExtTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesServDescrExtTable' 
CES service description extended table.
This table is used during the creation of the connection between the CES-SDT port and the CES-V35 port.     
The index of this table is ifIndex.
hwAtmCesServDescrExtEntry row .1.3.6.1.4.1.2011.5.11.1.1
CES service description extended table.
This table is used during the creation of the connection between the CES-SDT port and the CES-V35 port.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwAtmCesServDescrExtNValue
The N value of V35 port.
Integer32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.5.11.1.1.1
hwAtmCesServDescrExtBitMap
The timeslot bitmap in SDT mode.
Unsigned32r/w
Constraints:
range: 2-4294967294
 .1.3.6.1.4.1.2011.5.11.1.1.2
hwAtmCesServDescrExtFillRate
The fillrate of cell.
Integer32r/w
Constraints:
range: 20-47
 .1.3.6.1.4.1.2011.5.11.1.1.3
hwAtmCesServDescrExtRowStatus
This object is used to create a
new row or modify or delete an
existing row in this table.
createAndGo(4),destroy(6)
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.11.1.1.4

hwAtmCesCfgTable

table
.1.3.6.1.4.1.2011.5.11.2 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesCfgTable' 
CES board configration table. 
The indexes of this table are hwFrameIndex and hwSlotIndex.
hwAtmCesCfgEntry row .1.3.6.1.4.1.2011.5.11.2.1
CES board configration table.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
Indexes
Column Syntax OID
hwAtmCesCfgWorkMode
CES board working mode.
Options:
1. tdm(1) - CES board working mode is tdm
2. e1(2) - CES board working mode is e1
3. v35(3) - CES board working mode is v35
4. idle(4) - CES board working mode is idle
5. indep(5) - …
Enumerationr/w
Enumerated Values:
1tdm
2e1
3v35
4idle
5indep
 .1.3.6.1.4.1.2011.5.11.2.1.1
hwAtmCesCfgDDNClockMode
The DDN clock mode of CES board.
Options:
1. line(1) - The DDN clock mode of CES board is line
2. srts(2) - The DDN clock mode of CES board is srts
Enumerationr/w
Enumerated Values:
1line
2srts
 .1.3.6.1.4.1.2011.5.11.2.1.2
hwAtmCesCfgDDNClockSrcPort
The DDN clock source of CES board.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.5.11.2.1.3
hwAtmCesCfgE1GroupType0
E1 Group 0 (port 0~3) work mode.
Options:
1. cesE1(1) - E1 work mode is cesE1
2. tdmE1(2) - E1 work mode is tdmE1
3. ddnE1(3) - E1 work mode is ddnE1
Enumerationr/w
Enumerated Values:
1cesE1
2tdmE1
3ddnE1
 .1.3.6.1.4.1.2011.5.11.2.1.4
hwAtmCesCfgE1GroupType1
E1 Group 1 (port 4~7) work mode.
Options:
1. cesE1(1) - E1 work mode is cesE1
2. tdmE1(2) - E1 work mode is tdmE1
3. ddnE1(3) - E1 work mode is ddnE1
Enumerationr/w
Enumerated Values:
1cesE1
2tdmE1
3ddnE1
 .1.3.6.1.4.1.2011.5.11.2.1.5
hwAtmCesCfgE1GroupType2
E1 Group 2 (port 8~11) work mode.
Options:
1. cesE1(1) - E1 work mode is cesE1
2. tdmE1(2) - E1 work mode is tdmE1
3. ddnE1(3) - E1 work mode is ddnE1
Enumerationr/w
Enumerated Values:
1cesE1
2tdmE1
3ddnE1
 .1.3.6.1.4.1.2011.5.11.2.1.6
hwAtmCesCfgE1GroupType3
E1 Group 3 (port 12~15) work mode.
Options:
1. cesE1(1) - E1 work mode is cesE1
2. tdmE1(2) - E1 work mode is tdmE1
3. ddnE1(3) - E1 work mode is ddnE1
Enumerationr/w
Enumerated Values:
1cesE1
2tdmE1
3ddnE1
 .1.3.6.1.4.1.2011.5.11.2.1.7
hwAtmCesCfgAccessMode
Board work mode.
Options:
1. e1(1) - E1
2. t1(2) - T1
Enumerationr/w
Enumerated Values:
1e1
2t1
 .1.3.6.1.4.1.2011.5.11.2.1.8

hwAtmCesPortCfgTable

table
.1.3.6.1.4.1.2011.5.11.3 · 1 row entry · 20 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesPortCfgTable' 
Port configration table of CES board. The table is used to port configration
of CES board.
The index of this table is ifIndex.
hwAtmCesPortCfgEntry row .1.3.6.1.4.1.2011.5.11.3.1
Port configration table of CES board. The table is used to port configration
of CES board.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwAtmCesPortCfgWorkMode
The working mode of port.
Options:
1. uni(1) - UNI mode
2. sdt(2) - SDT mode
3. udt(3) - UDT mode
4. idle(4) - Idle mode
5. ima(5) - IMA mode
6. invalidMode(-1) - Invalid mode
Enumerationr/w
Enumerated Values:
-1invalidMode
1uni
2sdt
3udt
4idle
5ima
 .1.3.6.1.4.1.2011.5.11.3.1.1
hwAtmCesPortCfgClockMode
The clock mode of port.
Options:
1. system(1) - System clock
2. line(2) - Line clock
3. acm(3) - Acm clock
4. srts(4) - Srts clock
5. invalidClock(-1) - Invalid clock
Enumerationr/w
Enumerated Values:
-1invalidClock
1system
2line
3acm
4srts
 .1.3.6.1.4.1.2011.5.11.3.1.2
hwAtmCesPortCfgSignalType
Signal type of port.
Options:
1. ccs(1) - CCS signal
2. cas(2) - CAS signal
3. invalidSignal(-1) - Invalid signal
Enumerationr/w
Enumerated Values:
-1invalidSignal
1ccs
2cas
 .1.3.6.1.4.1.2011.5.11.3.1.3
hwAtmCesPortCfgFrameVerifyMode
Frame verify mode of port.
Mode adapt is used for SDT mode only.
Options:
1. enable(1) - Open frame verify
2. disable(2) - Close frame verify
3. adapt(3) - Auto adaptation for w…
Enumerationr/w
Enumerated Values:
-1invalidOrNotSupport
1enable
2disable
3adapt
 .1.3.6.1.4.1.2011.5.11.3.1.4
hwAtmCesPortTimeSlotBMP
Timeslot bitmap of port, 0 is the initial value of timeslot bitmap.
Unsigned32
Constraints:
range: 2-4294967294
range: 0-0
 .1.3.6.1.4.1.2011.5.11.3.1.5
hwAtmCesPortCfgWarningStatus
Alarm state of port.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.3.1.6
hwAtmCesPortCfgUtopiaStatus
UTOPIA port state.
Options:
1. normal(1) - Normal state
2. test(2) - Test state
3. idle(3) - Idle state
4. notExist(4) - Does not exist
5. fail(5) - Fail state
6. block(6) - Block state
Enumeration
Enumerated Values:
1normal
2test
3idle
4notExist
5fail
6block
 .1.3.6.1.4.1.2011.5.11.3.1.7
hwAtmCesPortCfgLiuStatus
LIU port state.
Options:
1. normal(1) - Normal state
2. test(2) - Test state
3. idle(3) - Idle state
4. notExisted(4) - Does not exist
5. fail(5) - Fail state
6. block(6) …
Enumeration
Enumerated Values:
-1invalidStatus
1normal
2test
3idle
4notExisted
5fail
6block
7maintain
11localLoop
12remoteLoop
13tsLocalLoop
14payLoadLoop
 .1.3.6.1.4.1.2011.5.11.3.1.8
hwAtmCesPortCfgImpedance
Impedance of port.
Options:
1. ohm75(1) - 75 ohm
2. ohm120(2) - 120 ohm
3. ohm100(3) - 100 ohm
4. invalidImpedance(-1) - Invalid impedance
Enumerationr/w
Enumerated Values:
-1invalidImpedance
1ohm75
2ohm120
3ohm100
 .1.3.6.1.4.1.2011.5.11.3.1.9
hwAtmCesPortCfgPhyState
E1 port physical state.
Options:
1. normal(0) - Normal state
2. fault(1) - Fault state
3. unknown(2) - Unknown state
Enumeration
Enumerated Values:
0normal
1fault
2unknown
 .1.3.6.1.4.1.2011.5.11.3.1.10
hwAtmCesPortCfgLoopLineState
E1 port line state.
Options:
1. synchronized(0) - Synchronized state
2. farEndAlarm(1) - Far-End-Alarm state
3. nearEndAlarm(2) - Near-End-Alarm state
4. testing(3) - Testing state
5. unknown(4) - Unknown st…
Enumeration
Enumerated Values:
0synchronized
1farEndAlarm
2nearEndAlarm
3testing
4unknown
 .1.3.6.1.4.1.2011.5.11.3.1.11
hwAtmCesPortCfgE1Frametype
pvm-e1 port frame type.
Options:
1. pcm31(1) - PCM31 frame
2. unframe(2) - It's not a frame
Enumerationr/w
Enumerated Values:
1pcm31
2unframe
 .1.3.6.1.4.1.2011.5.11.3.1.12
hwAtmCesPortAdminStatus
Port operation type.
Options:
1. reset(1) - Reset port
2. selfcheck(2) - Self check
Enumerationr/w
Enumerated Values:
1reset
2selfcheck
 .1.3.6.1.4.1.2011.5.11.3.1.13
hwAtmCesPCMErrorReportAlarm
PCM error report configuration.
bit0: report alarm when pcm line fault occurs;
bit1: set PCM fault and set port to OOS state when ULF exceeds the threshold;
bit2: set PCM fault and set port to OOS state when OLF exceeds…
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.2011.5.11.3.1.14
hwAtmCesPortCfgESAlarmThreshold
Errored seconds alarm threshold.
Integer32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.2011.5.11.3.1.15
hwAtmCesPortCfgCSESAlarmThreshold
Consecutive severely errored seconds alarm threshold.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2011.5.11.3.1.16
hwAtmCesPortCfgDMAlarmThreshold
Degraded minutes alarm threshold.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.2011.5.11.3.1.17
hwAtmCesPortLineCode
Configuration of the line encoding type.
Options:
1. hdb3(1) - HDB3 code
2. ami(2) - AMI code
3. b8zs(3) - B8ZS code
4. invalidCode(-1) - Invalid code
Enumerationr/w
Enumerated Values:
-1invalidCode
1hdb3
2ami
3b8zs
 .1.3.6.1.4.1.2011.5.11.3.1.18
hwAtmCesPortAcmSource
Configuration of adaptive clock source.
255 represents invalid value.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.11.3.1.19
hwAtmCesPortCfgState
Indicates the configuration status of the subscriber type.
Options:
1. notConfigUserType(1) - Did not configure
2. configVoiceUserType(2) - Configured MG PRA subscriber
3. configPWUserType(3) - Configured Connectio…
Enumeration
Enumerated Values:
1notConfigUserType
2configVoiceUserType
3configPWUserType
4configNativeTDM
 .1.3.6.1.4.1.2011.5.11.3.1.20

hwAtmCesPortV35CfgTable

table
.1.3.6.1.4.1.2011.5.11.4 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesPortV35CfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesPortV35CfgTable' 
Port configration table of V35.
This table is used to configure the CES-V35 port. The configuration includes reversing the clock and clock mode, blocking and unblocking the port, and querying the N value, status and alarm of the port.     
The index of this table is ifIndex.
hwAtmCesPortV35CfgEntry row .1.3.6.1.4.1.2011.5.11.4.1
Port configration table of V35.
This table is used to configure the CES-V35 port. The configuration includes reversing the clock and clock mode, blocking and unblocking the port, and querying the N value, status and ala…
Indexes
Column Syntax OID
hwAtmCesPortV35CfgNValue
N value of V35 port.
Integer32
Constraints:
range: 1-32
 .1.3.6.1.4.1.2011.5.11.4.1.1
hwAtmCesPortV35CfgClockMode
Clock mode of port.
Options:
1. dceInternal(1) - Dec-Internal clock
2. dceSlave(2) - Dec-Slave clock
3. dceExternal(3) - Dec-External clock
4. dteInternal(4) - Dte-Internal clock
5. dteSlave(5) - Dte-Slave clock
6…
Enumerationr/w
Enumerated Values:
1dceInternal
2dceSlave
3dceExternal
4dteInternal
5dteSlave
6dteExternal
 .1.3.6.1.4.1.2011.5.11.4.1.2
hwAtmCesPortV35CfgBlockStatus
To block or unblock the port, or to inquiry the block state.
Options:
1. block(1) - Block the port
2. unblock(2) - UnBlock the port
3. invalidStatus(-1) - Invalid status
Enumerationr/w
Enumerated Values:
-1invalidStatus
1block
2unblock
 .1.3.6.1.4.1.2011.5.11.4.1.3
hwAtmCesPortV35CfgReversePhase
Inverse the clock of V35 port, inquiry the clock state.
Options:
1. noInverse(1) - Not inverse state
2. inverse(2) - Inverse state
Enumerationr/w
Enumerated Values:
1noInverse
2inverse
 .1.3.6.1.4.1.2011.5.11.4.1.4
hwAtmCesPortV35CfgWarningStatus
Alarm state of V35 port.
Integer32
Constraints:
range: 0-127
 .1.3.6.1.4.1.2011.5.11.4.1.5
hwAtmCesPortV35CfgPortV35Status
Port state of V35.
Options:
1. idle(1) - Idle state
2. normal(2) - Normal state
3. localLoop(3) - Local loop state
4. remoteLoop(4) - Remote loop state
5. block(5) - Block state
6. fault(6) - Fault …
Enumeration
Enumerated Values:
1idle
2normal
3localLoop
4remoteLoop
5block
6fault
 .1.3.6.1.4.1.2011.5.11.4.1.6

hwAtmCesChnlStatisTable

table
.1.3.6.1.4.1.2011.5.11.5 · 1 row entry · 17 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesChnlStatisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesChnlStatisTable' 
The statistics table of CES channel. This table is used to 
collect the cell data of the SDT port.  
The index of this table is ifIndex.
hwAtmCesChnlStatisEntry row .1.3.6.1.4.1.2011.5.11.5.1
The statistics table of CES channel. This table is used to
collect the cell data of the SDT port.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwAtmCesChnlStatisCounter0
Number of discarded cells due to Output Queue or Segmentation Buffer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.1
hwAtmCesChnlStatisCounter1
Not used.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.2
hwAtmCesChnlStatisCounter2
Number of cells written to the Reassembly Buffer. It excludes cells that were discarded for any
reason and cells that are inserted instead of lost cells (atmfReassembledCells).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.3
hwAtmCesChnlStatisCounter3
Number of times incomingMFB pulse is not synchronous to SDT start of structure upstream (AAL1).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.4
hwAtmCesChnlStatisCounter4
Number of cells causing a Reassembly Buffer overflow (AAL0 & AAL1). It includes accepted cells
that are causing the filling level to exceed the predefined threshold and discarded cells due to
the attempt of writing to…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.5
hwAtmCesChnlStatisCounter5
Number of end of Reassembly Buffer overflow (AAL0 & AAL1). The value is incremented upon acceptance
of the next cell after Reassembly Buffer overflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.6
hwAtmCesChnlStatisCounter6
The count of the number of AAL1 header errors detected including those corrected. Header errors include
correctable and uncorrectable CRC, plus bad parity. (atmfCESHdrErrors).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.7
hwAtmCesChnlStatisCounter7
Number of times that the sequence number of an
incoming AAL1 SARPDU causes a transition of the
SC algorithm from 'sync' to 'out of sequence' and
from 'invalid' to 'out of sync'.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.8
hwAtmCesChnlStatisCounter8
Number of downstream 'misinserted cells' detected by the AAL1 sequence count
algorithm (atmfCESMisinsertedCells).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.9
hwAtmCesChnlStatisCounter9
Number of downstream cells discarded by the AAL1 sequence count algorithm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.10
hwAtmCesChnlStatisCounter10
Number of rejected AAL1 SDT pointers due to parity error or wrong pointer value (93 < pointer <127).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.11
hwAtmCesChnlStatisCounter11
Number of SC cycles with more than one AAL1 SDT pointer field if only one pointer is expected (sdt_once = 1).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.12
hwAtmCesChnlStatisCounter12
Number of start of reassembly buffer underflow (AAL0 & AAL1) (atmfCESBufUnderflow).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.13
hwAtmCesChnlStatisCounter13
Number of inserted starvation cells (AAL0 & AAL1) due to reassembly buffer underflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.14
hwAtmCesChnlStatisCounter14
Number of times the Reassembly Buffer is re-initialized due to AAL1 start of structure
is out of sync with port start of structure.This records the count of the number of events
in which the AAL1 reassembler found tha…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.15
hwAtmCesChnlStatisCounter15
Number of downstream 'Lost cells' detected by the AAL1 sequence count algorithm (atmfCESLostCells).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.5.1.16
hwAtmCesChnlStatisOper
The operating code of clearing the statistics of CES SDT port.
Options:
1. clear(1) - Clear the statistics of CES SDT port
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.2011.5.11.5.1.17

hwAtmCesUDTPortStatisTable

table
.1.3.6.1.4.1.2011.5.11.6 · 1 row entry · 17 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesUDTPortStatisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesUDTPortStatisTable' 
The statistics table of CES UDT port.
This table is used to collect the cell data of the UDT port.   
The index of this table is ifIndex.
hwAtmCesUDTPortStatisEntry row .1.3.6.1.4.1.2011.5.11.6.1
The statistics table of CES UDT port.
This table is used to collect the cell data of the UDT port.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwAtmCesUDTPortStatisCounter0
Number of discarded cells due to Output Queue or Segmentation Buffer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.1
hwAtmCesUDTPortStatisCounter1
Not used.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.2
hwAtmCesUDTPortStatisCounter2
Number of cells written to the Reassembly Buffer. It excludes cells that were discarded
for any reason and cells that are inserted instead of lost cells (atmfReassembledCells).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.3
hwAtmCesUDTPortStatisCounter3
Number of times incomingMFB pulse is not synchronous to SDT start of structure upstream (AAL1).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.4
hwAtmCesUDTPortStatisCounter4
Number of cells causing a Reassembly Buffer overflow (AAL0 & AAL1). It includes accepted cells
that are causing the filling level to exceed the predefined threshold and discarded cells due to
the attempt of writing to…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.5
hwAtmCesUDTPortStatisCounter5
Number of end of Reassembly Buffer overflow (AAL0 & AAL1). The value is incremented upon acceptance
of the next cell after Reassembly Buffer overflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.6
hwAtmCesUDTPortStatisCounter6
The count of the number of AAL1 header errors detected including those corrected. Header errors include
correctable and uncorrectable CRC, plus bad parity. (atmfCESHdrErrors).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.7
hwAtmCesUDTPortStatisCounter7
Number of times that the sequence number of
an incoming AAL1 SARPDU causes a transition of
the SC algorithm from 'sync' to 'out of sequence'
and from 'invalid' to 'out of sync'.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.8
hwAtmCesUDTPortStatisCounter8
Number of downstream 'misinserted cells' detected by the AAL1 sequence count algorithm (atmfCESMisinsertedCells).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.9
hwAtmCesUDTPortStatisCounter9
Number of downstream cells discarded by the AAL1 sequence count algorithm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.10
hwAtmCesUDTPortStatisCounter10
Number of rejected AAL1 SDT pointers due to parity error or wrong pointer value (93 < pointer <127).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.11
hwAtmCesUDTPortStatisCounter11
Number of SC cycles with more than one AAL1 SDT pointer field if only one pointer is expected (sdt_once = 1).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.12
hwAtmCesUDTPortStatisCounter12
Number of start of reassembly buffer underflow (AAL0 & AAL1) (atmfCESBufUnderflow).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.13
hwAtmCesUDTPortStatisCounter13
Number of inserted starvation cells (AAL0 & AAL1) due to reassembly buffer underflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.14
hwAtmCesUDTPortStatisCounter14
Number of times the Reassembly Buffer is re-initialized due to AAL1 start of structure is out of
sync with port start of structure.This records the count of the number of events in which the AAL1
reassembler found tha…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.15
hwAtmCesUDTPortStatisCounter15
Number of downstream 'lost cells' detected by the AAL1 sequence count algorithm (atmfCESLostCells).
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.6.1.16
hwAtmCesUDTPortStatisOper
The operating code of clearing the statistics of CES UDT port.
Options:
1. clear(1) - Clear the statistics of CES UDT port
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.2011.5.11.6.1.17

hwAtmCesUNIPortStatisTable

table
.1.3.6.1.4.1.2011.5.11.7 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesUNIPortStatisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesUNIPortStatisTable' 
The statistics table of CES UNI port.
This table is used to collect the cell data of the UNI port.
The index of this table is ifIndex.
hwAtmCesUNIPortStatisEntry row .1.3.6.1.4.1.2011.5.11.7.1
The statistics table of CES UNI port.
This table is used to collect the cell data of the UNI port.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwAtmCesUNIPortStatisCounter0
Number of discarded cells due to output queue, ATM Receive Buffer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.7.1.1
hwAtmCesUNIPortStatisCounter1
Number of received cells with corrected HEC errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.7.1.2
hwAtmCesUNIPortStatisCounter2
Number of received cells with non-corrected HEC errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.7.1.3
hwAtmCesUNIPortStatisCounter3
Number of times cell delineation SYNC state is left, except when forced.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.7.1.4
hwAtmCesUNIPortStatisCounter4
Number of discarded cells due to ATM transmit buffer overflow.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.7.1.5
hwAtmCesUNIPortStatisOper
The operating code of clearing the statistics of CES UNI port.
Options:
1. clear(1) - Clear the statistics of CES UNI port
Enumerationr/w
Enumerated Values:
1clear
 .1.3.6.1.4.1.2011.5.11.7.1.6

hwAtmCesPortMaintTable

table
.1.3.6.1.4.1.2011.5.11.8 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesPortMaintTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesPortMaintTable' 
The maintenace table of CES port.
This table is used to set the loopback of the CES port, including the local loopback (LL), remote loopback (RL), and timeslot loopback.      
The timeslot loopback takes effect only on the CES-SDT port.  
The index of this table is ifIndex.
hwAtmCesPortMaintEntry row .1.3.6.1.4.1.2011.5.11.8.1
The maintenace table of CES port.
This table is used to set the loopback of the CES port, including the local loopback (LL), remote loopback (RL), and timeslot loopback.
The timeslot loopback takes effect only on …
Indexes
Column Syntax OID
hwAtmCesPortMaintLoop
The looping test mode of CES port.
Options:
1. noLoop(1) - No-loop test
2. localLoop(2) - Local-loop test
3. remoteLoop(3) - Remote-loop test
4. tsLocalLoop(4) - Ts-Localloop test
5. payLoadLoop(5) - Payload-loo…
Enumerationr/w
Enumerated Values:
1noLoop
2localLoop
3remoteLoop
4tsLocalLoop
5payLoadLoop
 .1.3.6.1.4.1.2011.5.11.8.1.1
hwAtmCesPortMaintOper
The oprating of looping test mode.
Options:
1. set(1) - Set looping test
2. clear(2) - Clear looping test
3. notSupportQuery(-1) - Not support query
Enumerationr/w
Enumerated Values:
-1notSupportQuery
1set
2clear
 .1.3.6.1.4.1.2011.5.11.8.1.2
hwAtmCesPortMaintSingleTimeslotId
The timeslot number of single timeslot looping test.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.2011.5.11.8.1.3

hwCesECSMonitorControlTable

table
.1.3.6.1.4.1.2011.5.11.11 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesECSMonitorControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwCesECSMonitorControlTable' 
E1 monitor status control table.
The indexes of this table are ifIndex and hwCesECSMonitorPeriodType.
hwCesECSMonitorControlEntry row .1.3.6.1.4.1.2011.5.11.11.1
E1 monitor status control table.
The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType.
Indexes
Column Syntax OID
hwCesECSMonitorPeriodType
Monitor period type.
Options:
1. quarter(1) - Quarter
2. day(2) - Day
Enumerationr/w
Enumerated Values:
1quarter
2day
 .1.3.6.1.4.1.2011.5.11.11.1.1
hwCesECSMonitorStatusReal
Current monitor status, 0:disable, 1:enable.
Options:
1. disable(0) - Disable current monitor
2. enable(1) - Enable current monitor
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.5.11.11.1.2
hwCesECSMonitorStartTimeReal
The start time of the monitor.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.5.11.11.1.3
hwCesECSMonitorStatusUserSet
The monitor status set by user.
Options:
1. disable(0) - Set monitor close
2. enable(1) - Set monitor open
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.5.11.11.1.4
hwCesECSMonitorStartTimeUserSet
The start time of the monitor set by user.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.5.11.11.1.5

hwCesECSThresholdControlTable

table
.1.3.6.1.4.1.2011.5.11.12 · 1 row entry · 1 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesECSThresholdControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwCesECSThresholdControlTable' 
E1 threshold enable table.
The indexes of this table are ifIndex and hwCesECSMonitorPeriodType.
hwCesECSThresholdControlEntry row .1.3.6.1.4.1.2011.5.11.12.1
E1 threshold enable table.
The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType.
Indexes
Column Syntax OID
hwCesECSThresholdEnabled
E1 threshold enable.
Options:
1. disable(0) - Disable the E1 threshold
2. enable(1) - Enable the E1 threshold
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.5.11.12.1.1

hwCesECSThresholdTable

table
.1.3.6.1.4.1.2011.5.11.13 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesECSThresholdTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwCesECSThresholdTable' 
E1 monitor threshold table.
The indexes of this table are ifIndex and hwCesECSMonitorPeriodType.
hwCesECSThresholdEntry row .1.3.6.1.4.1.2011.5.11.13.1
E1 monitor threshold table.
The indexes of this entry are ifIndex and hwCesECSMonitorPeriodType.
Indexes
Column Syntax OID
hwCesECSThresholdLowES
Errored seconds low threshold.
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.13.1.1
hwCesECSThresholdHighES
Errored seconds high threshold.
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.13.1.2
hwCesECSThresholdSES
Severely errored seconds threshold.
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.13.1.3
hwCesECSThresholdUAS
Unavailable seconds threshold.
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.13.1.4
hwCesECSThresholdCESC
Consecutive severely errored seconds threshold.
SNMPv2-SMIGauge32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.13.1.5

hwCesECSDateTable

table
.1.3.6.1.4.1.2011.5.11.14 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesECSDateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwCesECSDateTable' 
E1 perform monitor statistic table.
The indexes of this table are ifIndex, hwCesECSMonitorPeriodType and hwCesECSMonitorStage.
hwCesECSDateEntry row .1.3.6.1.4.1.2011.5.11.14.1
E1 perform monitor statistic table.
The indexes of this entry are ifIndex, hwCesECSMonitorPeriodType and hwCesECSMonitorStage.
Indexes
Column Syntax OID
hwCesECSMonitorStage
Perform monitor period stage, 0:current, 1:history
Options:
1. current(0) - The perform monitor period is current
2. history(1) - The perform monitor period is history
Enumeration
Enumerated Values:
0current
1history
 .1.3.6.1.4.1.2011.5.11.14.1.1
hwCesECSMonitorStageStartTime
The start time of the monitor period.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.5.11.14.1.2
hwCesECSDataES
Statistic of the errored seconds.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.14.1.3
hwCesECSDataSES
Statistic of the severe errors.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.14.1.4
hwCesECSDataUAS
Statistic of the unavailable seconds.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.14.1.5

hwAtmCesSubboardWorkModeTable

table
.1.3.6.1.4.1.2011.5.11.15 · 1 row entry · 1 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesSubboardWorkModeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesSubboardWorkModeTable' 
CES board configration table.
The indexes of this table are hwFrameIndex and hwSlotIndex.
hwAtmCesSubboardWorkModeEntry row .1.3.6.1.4.1.2011.5.11.15.1
CES board configration table.
The indexes of this entry are hwFrameIndex and hwSlotIndex.
Indexes
Column Syntax OID
hwAtmCesSubboardWorkMode
CES subboard working mode.
Options:
1. loadsharing(1) - The CES subboard works in loadsharing mode
2. activestandby(2) - The CES subboard works in activestandby mode
Enumerationr/w
Enumerated Values:
1loadsharing
2activestandby
 .1.3.6.1.4.1.2011.5.11.15.1.1

hwAtmCesPortCESoPCLKTable

table
.1.3.6.1.4.1.2011.5.11.17 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmCesPortCESoPCLKTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwAtmCesPortCESoPCLKTable' 
Adaptive clock source configuration table.
The indexes of this table are hwFrameIndex, hwSlotIndex and hwAtmCesPortCESoPCLKIndex.
hwAtmCesPortCESoPCLKEntry row .1.3.6.1.4.1.2011.5.11.17.1
Adaptive clock source configuration table.
The indexes of this entry are hwFrameIndex, hwSlotIndex and hwAtmCesPortCESoPCLKIndex.
Indexes
Column Syntax OID
hwAtmCesPortCESoPCLKIndex
The index of adaptive clock source.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.5.11.17.1.1
hwAtmCesPortCESoPCLKBindPW
Set and get the Connection ID binding with the adaptive clock source.
Unsigned32r/w
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.2011.5.11.17.1.2
hwAtmCesPortCESoPCLKSetFlag
Get and set the configuration of adaptive clock source.
Options:
1. null(1) - The clock source is null
2. exist(2) - The clock source exist
Enumerationr/w
Enumerated Values:
1null
2exist
 .1.3.6.1.4.1.2011.5.11.17.1.3
hwAtmCesPortCESoPCLKState
Get the running state of adaptive clock source.
Options:
1. normal(1) - Normal state
2. fault(2) - Fault state
Enumeration
Enumerated Values:
1normal
2fault
 .1.3.6.1.4.1.2011.5.11.17.1.4
hwAtmCesPortCESoPLineCLKPortId
Set and get the Port ID binding with the Line clock source.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.2011.5.11.17.1.5
hwAtmCesPortCESoPLineCLKState
Get the running state of Line clock source.
Options:
1. normal(1) - Normal state
2. fault(2) - Fault state
Enumeration
Enumerated Values:
1normal
2fault
 .1.3.6.1.4.1.2011.5.11.17.1.6

hwCesTDMVCLCfgTable

table
.1.3.6.1.4.1.2011.5.11.18 · 1 row entry · 4 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwCesTDMVCLCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-CES-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-CES-MIB::hwCesTDMVCLCfgTable' 
TDM VCL configuration table.
The indexes of this table are hwTDMVCLID and ifIndex.
hwCesTDMVCLCfgEntry row .1.3.6.1.4.1.2011.5.11.18.1
TDM VCL configuration table.
The indexes of this entry are hwTDMVCLID and ifIndex.
Indexes
Column Syntax OID
hwTDMVCLID
TDM VCL ID.
Unsigned32
Constraints:
range: 0-4294967294
 .1.3.6.1.4.1.2011.5.11.18.1.1
hwTDMVCLType
TDM VCL type.
Options:
1. satop(1) - The TDM VCL Type is satop
2. cesop(2) - The TDM VCL Type is cesop
Enumerationr/w
Enumerated Values:
1satop
2cesop
 .1.3.6.1.4.1.2011.5.11.18.1.2
hwTDMVCLTimeslot
TDM timeslot, it must be set if hwTDMVCLType is set to be cesop.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2011.5.11.18.1.3
hwTDMVCLRowStatus
Row operation node . Running status cannot be deleted.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.11.18.1.4