HUAWEI-BULKSTATISTICS-MIB Table View

Bulk file management table, providing creat/modify/delete operations.
To create a bulk file, you need create a related record in this table,
and add object nodes in hwBulkObjectTable.If you delete a record, 
the object records in hwBulkObjectTable and all backup files will be also deleted.
The index of this table is hwBulkFileIndex.

hwBulkFileEntry row .1.3.6.1.4.1.2011.6.103.1.1.4.1

Bulk file management table, providing creat/modify/delete operations.
To create a bulk file, you need create a related record in this table,
and add object nodes in hwBulkObjectTable.If you delete a record,
the object …

Indexes

hwBulkFileIndex

Column	Syntax	OID
hwBulkFileIndex Index of bulk file,a unique identifier for a bulk file.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.1.1.4.1.1
hwBulkFileName Bulk file name. If you specify a path in the file name, this file is invalid.	OctetStringr/w Constraints: range: 1-63	.1.3.6.1.4.1.2011.6.103.1.1.4.1.2
hwBulkFileStorage Storage mode of the statistics file. Options: 1.ephemeral(1) -data file of small volume. It applies to be read once. 2.volatile(2) -stored in memory. Easy to lose. 3.permanent(3) -stored in hard disk. Keep well.	Enumerationr/w Enumerated Values: 1 ephemeral 2 volatile 3 permanent	.1.3.6.1.4.1.2011.6.103.1.1.4.1.3
hwBulkFileFormat Bulk file formats. Options: 1.standardBER(1)-standard SNMP ASN.1 BER. 2.bulkASCIIWithDeflate(2) -readable ASCII with deflate format. 3.bulkASCIIWithZipFile(3) -readable ASCII with zip format.	Enumerationr/w Enumerated Values: 1 standardBER 2 bulkASCIIWithDeflate 3 bulkASCIIWithZipFile	.1.3.6.1.4.1.2011.6.103.1.1.4.1.4
hwBulkFileCollectInterval Data collection interval. Options: 1.fifteenMinutes(1) -Every 15 minutes. 2.thirtyMinutes(2) -Every 30 minutes. 3.oneHour(3) -Every 1 hour. 4.sixHour(4) -Every 6 hours. 5.…	Enumerationr/w Enumerated Values: 1 fifteenMinutes 2 thirtyMinutes 3 oneHour 4 sixHour 5 oneDay 6 twoHour 7 twelveHour	.1.3.6.1.4.1.2011.6.103.1.1.4.1.5
hwBulkFileNmsGetInterval File report interval. The interval thirtyMinutes is not supported. The file report interval cannot be shorter than the data collection interval. Options: 1.hour(1) -The host generates a statistics file ev…	Enumerationr/w Enumerated Values: 1 hour 2 thirtyMinutes 3 fifteenMinutes 4 sixHour 5 oneDay 6 twoHour 7 twelveHour	.1.3.6.1.4.1.2011.6.103.1.1.4.1.6
hwBulkFileStatus Bulk file status. Options: 1.ready(1) -indicates that the statistics file is only created, leaving the actual statistics collection to be started. This value cannot be set. 2.create(2) -…	Enumerationr/w Enumerated Values: 1 ready 2 create 3 running 4 nospace 5 noMem 6 writeErr 7 stopped	.1.3.6.1.4.1.2011.6.103.1.1.4.1.7
hwBulkFileCurrDirectoryPath The latest index of the statistics file.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.6.103.1.1.4.1.8
hwBulkFileObjectMainType Identify main-type of object. The device will collect statistics of all the ports according to to hwBulkFileObjectMainType and hwBulkFileObjectSubType if these two objects are not null. The values of hwBulkFileObjectMa…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.1.1.4.1.9
hwBulkFileObjectSubType Identify sub-type of object. The device will collect statistics on all ports according to hwBulkFileObjectMainType and hwBulkFileObjectSubType if these two leaves are not null. The values of hwBulkFileObjectMainType an…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.1.1.4.1.10
hwBulkFileRowStatus Row operation object. When the centralized bulk feature is enabled, the file in the running state cannot be deleted, whereas when the distributed bulk feature is enabled, the file in any state can be deleted.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.103.1.1.4.1.11
hwBulkFileColNumMode Setting whether to report the statistics collected in the previous interval. After the statistics file is created, the identifier cannot be changed. Options: 1.reportLastSection(1) -indicates that the statistics col…	Enumerationr/w Enumerated Values: 1 reportLastSection 2 notReportLastSection	.1.3.6.1.4.1.2011.6.103.1.1.4.1.12
hwBulkFileCollectStartTime Setting the start time of the data collection with intervals of six hours or one day. The default start time is 00:00, and can only be an integer multiple of 15 minutes. The start time of the data collection with the …	OctetStringr/w Constraints: range: 1-5	.1.3.6.1.4.1.2011.6.103.1.1.4.1.13
hwBulkFileCopyNum The number of saved files during this task, read-only.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.1.1.4.1.14
hwBulkObjectCapItemList List of the statistical index. Through this object, the statistical index can be configured in batches in the format of bit-domain string. Each file supports up to 256 statistical indexes. The statistical index hwBulk…	Bitsr/w Enumerated Values: 0 pmpDslOprMode 1 pmpAturVdrId 2 pmpDslPrfName 3 pmpCrcEcNerUs 4 pmpCrcEcFerDs 5 pmpFecsNerUs 6 pmpFecsFerDs 7 pmpFecEvtNerUs 8 pmpFecEvtFerDs 9 pmpEsNerUs 10 pmpEsFerDs 11 pmpSesNerUs 12 pmpSesFerDs 13 pmpUasNerUs 14 pmpUasNerDs 15 pmpLossNerUs 16 pmpLossFerDs 17 pmpLofsNerUs 18 pmpLofsFerDs 19 pmpLolsFerUs 20 pmpLopsFerDs 21 pmpSucInit 22 pmpFailFullInit 23 pmpLineAttnUs 24 pmpLineAttnDs 25 pmpSnrUs 26 pmpSnrDs 27 pmpLineRateUs 28 pmpLineRateDs 29 pmpMaxAtblDrUs 30 pmpMaxAtblDrDs 31 pmpUpTime 32 pmpTrfcUs 33 pmpTrfcDs 34 pmpPwrStt 35 pmpNtePwrStt 36 pmpAatpUs 37 pmpAatpDs 38 pmpRUs 39 pmpRDs 40 pmpSUs 41 pmpSDs 42 pmpDUs 43 pmpDDs 44 pmpNUs 45 pmpNDs 46 pmpActInpUs 47 pmpActinpDs 48 pmpInmInpeqUs 49 pmpInmInpeqDs 50 pmpInmIatUs 51 pmpInmIatDs 52 pmpInmmeUs 53 pmpInmmeDs 54 pmpRtxusedUs 55 pmpRtxusedDs 56 pmpResynRatio 57 pmpPcbDs 58 pmpModuMode 59 pmpPboDs 60 pmpPboUs 61 pmpElem1Support 62 pmpIntervalValid 63 pmpFecUnevtNerUs 64 pmpGecUnevtNarDs 65 pmpEnBlkNerUs 66 pmpEnBlkFarDs 67 pmpRtxCwNerUs 68 pmpRtxCwFarDs 69 pmpRtxCcwNerUs 70 pmpRtxCcwFarDs 71 pmpRtxUnccwNerus 72 pmpRtxUnccwFards 73 pmpXturVdsNum 74 pmpXturVerNum 75 pmpActDelayUs 76 pmpActDelayDs 77 pmpAdslExtprfName 78 pmpBandPlan 79 pmpActPsdDs 80 pmpActPsdUs 81 pmpXturSvdNum 82 pmpPortState 83 pmpCpeType 84 pmpRtxleftrDs 85 pmpRtxleftrUs 86 pmpRtxefbDs 87 pmpRtxefbUs 88 pmpRtxmineftrDs 89 pmpRtxmineftruUs 90 pmpRtxactuaeftrDs 91 pmpRtxactuaeftrUs 92 pmpSigAttnUs 93 pmpSigAttnDs 94 pmpLineAttnPbUs 95 pmpLineAttnPbDs 96 pmpSignalAttnPbUs 97 pmpSignalAttnPbDs 98 pmpSnrMarginPbUs 99 pmpSnrmarginPbDs 100 pmpUsRateProf 101 pmpDsRateProf 102 pmpInpDelayProf 103 pmpLineSpectrumProf 104 pmpUpboProf 105 pmpDpboprof 106 pmpRfiProf 107 pmpNoiseMarginProf 108 pmpVirtualNoiseProf 109 pmpInmProf 110 pmpSosProf 111 pmpCpeChip 112 pmpMonitoredTime 113 pmpVectoringOprMode 114 pmpSraNe 115 pmpSraFe 116 pmpFraNe 117 pmpFraFe 118 pmpLprNe 119 pmpLprFe 120 pmpFastInit 121 pmpFailedFastInit 122 pmpLosNe 123 pmpLosFe 124 pmpLandeftrsNe 125 pmpLandeftrsFe 126 pmpAndeftrdsNe 127 pmpAndeftrdsFe 128 pmpMinandeftrNe 129 pmpMinandeftrFe 130 pmpMaxandeftrNe 131 pmpMaxandeftrFe 132 pmpSumandeftrNe 133 pmpSumandeftrFe 134 pmpAturVerNumHex 138 pmpSatnUs 139 pmpSatnDs 201 pmpSnrPtUs 202 pmpSnrPtDs 203 pmpBitAlUs 204 pmpBitAlDs 205 pmpHlogUs 206 pmpHlogDs 207 pmpQlnUs 208 pmpQlnDs 209 pmpGrpsizeUs 210 pmpGrpsizeDs 211 pmpTxpsdUs 212 pmpTxpsdDs 213 pmpQlnVectorUs 214 pmpQlnVectorDs 215 pmpGainAlUs 216 pmpGainAlDs 250 pmpUPackets 251 pmpDPackets 252 pmpUBytes 253 pmpDBytes 254 pmpUCarDPackets 255 pmpDCarDPackets 256 pmpUODPackets 257 pmpDODPackets 258 pmpUCvlanPackets 259 pmpDCvlanPackets 261 pmpXlinData 270 pmpXponServiceVlan 271 pmpXponOnuId 300 pmpTranOcts 301 pmpRecvOcts 302 pmpTranEthPortPackets 303 pmpRecvEthPortPackets 304 pmpRecvDiscardEthPortPackets 305 pmpTranDiscardEthPortPackets 306 pmpTranGreenSendEthPortOcts 307 pmpTranGreenSendethPortNumber 308 pmpTranGreensendDiscardEthNumber 309 pmpTranYellowSendEthPortOcts 310 pmpTranYellowSendEthPortNumber 311 pmpTranYellowSendDiscardEthNumber 312 pmpEthTranUnicastPackets 313 pmpEthRecvUnicastPackets 314 pmpEthTranMulticastPackets 315 pmpEthrecvMulticastPackets 316 pmpEthtranBoardcastPackets 317 pmpEthrecvBoardcastPackets 318 pmpEthTranPausePackets 319 pmpEthAlignmentErrorPackets 320 pmpEthTranCrcErrorPackets 321 pmpEthRecvCrcErrorPackets 322 pmpEthCollisionPackets 323 pmpEthTranOversizedPackets 324 pmpEthRecvOversizedPackets 325 pmpEthSingleCollisionPackets 326 pmpEthMultiCollisionPackets 327 pmpEthDiscardUndersizedPackets 328 pmpEthTranUndersizedPackets 329 pmpEthRecvUndersizedPackets 330 pmpEthTranFragments 331 pmpEthRecvFragments 332 pmpEthTranJabbers 333 pmpEthRecvJabbers 334 pmpEthTran64BytePackets 335 pmpEthRecv64BytePackets 336 pmpEthTran65127BytePackets 337 pmpEthRecv65127BytePackets 338 pmpEthTran128255BytePackets 339 pmpEthRecv128255BytePackets 340 pmpEthTran256511BytePackets 341 pmpEthRecv256511BytePackets 342 pmpEthTran5121023BytePackets 343 pmpEthRecv5121023BytePackets 344 pmpEthTran10241518BytePackets 345 pmpEthRecv10241518BytePackets 346 pmpEthTranErrorPackets 347 pmpEthRecvErrorPackets 348 pmpEthIntervalValid 349 pmpEthTranMaxRate 350 pmpEthRecvMaxRate 351 pmpEthTranMaxBandwidthUsage 352 pmpEthRecvMaxBandwidthUsage 353 pmpEthTranMaxRateTime 354 pmpEthRecvMaxRateTime 360 pmpGponUniUsRate 361 pmpGponUniDsRate 362 pmpGponUniErrPktRatio 363 pmpGponUniOpticsTemp 364 pmpXponUniOpticsBiasCurr 365 pmpXponUniOpticsVolt 366 pmpXponUniOpticsTxPower 367 pmpGponUniTranOcts 368 pmpGponUniRecvOcts 369 pmpGponUniTranPackets 370 pmpGponUniRecvPackets 371 pmpGponUniDiscardPackets 372 pmpGponUniTxDiscardPackets 373 pmpGponUniRecvErrorPackets 376 pmpEponUniUsRate 377 pmpEponUniDsRate 378 pmpEponUniErrPktRatio 379 pmpEponUniOpticsTemp 380 pmpEponUniOpticsBiasCurr 381 pmpEponUniOpticsVolt 382 pmpEponUniOpticsTxPower 383 pmpEponUniTxDiscardPackets 384 pmpEponUniRxDiscardPackets 385 pmpEponUniRecvOcts 386 pmpEponUniTranOcts 387 pmpEponUniRecvErrorPackets 388 pmpEponUniTranPackets 389 pmpEponUniRecvPackets 390 pmpGponNniUsOcts 391 pmpGponNniDsOcts 392 pmpGponNniUsRate 393 pmpGponNniDsRate 394 pmpXponNniOpticsTemp 395 pmpXponNniOpticsBiasCurr 396 pmpXponNniOpticsVolt 397 pmpXponNniOpticsTxPower 398 pmpXponNniOpticsRxPower 399 pmpXponOltNniopticsRxPower 400 pmpGponNniLofi 401 pmpGponNniUpErrDelimiter 402 pmpGponNniUpErrBip 403 pmpGponNniDownerrBip 404 pmpGponNniupFecCorrectBlock 405 pmpGponNniupFecUncorrectBlock 406 pmpGponNniUpHec 407 pmpGponNniOfflineTimes 408 pmpEponNniUsRate 409 pmpEponNniDsRate 410 pmpEponNniOpticsTemp 411 pmpEponNniOpticsBiasCurr 412 pmpEponNniOpticsVolt 413 pmpEponNniOpticsTxPower 414 pmpEponNniOpticsRxPower 415 pmpEponOltNniOpticsRxPower 416 pmpEponNniUsOcts 417 pmpEponNniDsOcts 418 pmpEponNniofflinetimes 424 pmpXponOnuEthPortUsRate 425 pmpXponOnuEthPortDsRate 426 pmpXponOnuEthPortRxTotal 427 pmpXponOnuEthPortRxUnic 428 pmpXponOnuEthPortRxBrdc 429 pmpXponOnuEthPortRxMltc 430 pmpXponOnuEthPortTxTotal 431 pmpXponOnuEthPortTxUnic 432 pmpXponOnuEthPortTxBrdc 433 pmpXponOnuEthPortTxMltc 434 pmpXponOnuEthPortRxOcts 435 pmpXponOnuEthPortTxOcts 436 pmpXponOnuethPortRxErrorPackets 440 pmpEponOnuEthPortUsRate 441 pmpEponOnuEthPortDsRate 442 pmpEponOnuEthPortRecvTotal 443 pmpEponOnuEthPortRxUnic 444 pmpEponOnuEthPortRxBrdc 445 pmpEponOnuEthPortRxMltc 446 pmpEponOnuEthPortTxTotal 447 pmpEponOnuEthPortTxUnic 448 pmpEponOnuEthPortTxBrdc 449 pmpEponOnuEthPortTxMltc 450 pmpEponOnuEthPortRxOcts 451 pmpEponOnuEthPortTxOcts 452 pmpEponOnuEthPortRxErrorPackets 500 pmpBackboardPortBandwith 501 pmpRecvSmallMainboardOcts 502 pmpTranSmallMainboardOcts 503 pmpRecvDiscardSmallMainboardPackets 504 pmpTranDiscardSmallMainboardPackets 505 pmpRecvBigMainboardOcts 506 pmpTranBigMainboardOcts 507 pmpRecvDiscardBigMainboardPackets 508 pmpTranDiscardBigMainboardPackets 520 pmpInterboardportBandwith 521 pmpInterboardportRecvOcts 522 pmpInterboardportTranOcts 523 pmpInterboardportRecvDiscardpackets 524 pmpInterboardportTranDiscardpackets 600 boardCpuOccupation 601 boardTemperature 602 boardDspOccupation 603 pmpPortDesc 604 pmpLineCardName 605 pmpLineCardHardwareVersion 650 boardMgifFailedNum 700 pmpGponNniRecvErrorPackets 701 pmpGponNniTranPackets 702 pmpGponNniRecvPackets 703 pmpGponNniDnFecCorrectCount 704 pmpGponNniDnFecUnCorrectCount 730 pmpEponNniRecvErrorPackets 731 pmpEponNniTranPackets 732 pmpEponNniRecvPackets 750 singleEndedFramelossratioNearMax 751 singleEndedFramelossratioNearMin 752 singleEndedFramelossratioNearAverage 753 singleEndedFramelossratioFarMax 754 singleEndedFramelossratioFarMin 755 singleEndedFramelossratioFarAverage 756 twoWayDelayMax 757 twoWayDelayMin 758 twoWayDelayAverage 759 twoWayJitterMax 760 twoWayJitterMin 761 twoWayJitterAverage 762 oneWayDelayFarMax 763 oneWayDelayFarMin 764 oneWayDelayFarAverage 765 oneWayJitterFarMax 766 oneWayJitterFarMin 767 oneWayJitterFarAverage 768 oneWayDelayNearMax 769 oneWayDelayNearMin 770 oneWayDelayNearAverage 771 oneWayJitterNearMax 772 oneWayJitterNearMin 773 oneWayJitterNearAverage 780 pmpEponUniOptics10gTxPower 781 pmpEponUniOptics10gBiasCurr 800 pmpEponNniPeerOpticsTxPower 851 pmpEponUni1gChannelUsRate 852 pmpEponUni1gChannelErrPktRatio 853 pmpEponUni1gChannelUsBytes 854 pmpEponUni1gChannelDsBytes 855 pmpEponUni1gChannelDsRate 856 pmpEponUni1gChannelUsPackets 857 pmpEponUni1gChannelDsPackets 858 pmpEponUni1gChannelUsErrorPackets 859 pmpEponUni1gChannelUsDiscardPackets 860 pmpEponUni1gChannelDsDiscardPackets 861 pmpEponUni10gChannelUsrate 862 pmpEponUni10gChannelErrPktRatio 863 pmpEponUni10gChannelUsBytes 864 pmpEponUni10gChannelDsBytes 865 pmpEponUni10gChannelDsRate 866 pmpEponUni10gChannelUsPackets 867 pmpEponUni10gChannelDsPackets 868 pmpEponUni10gChannelUsErrorPackets 869 pmpEponUni10gChannelUsDiscardPackets 870 pmpEponUni10gChannelDsDiscardPackets 871 pmpXponOnuWifiTxTotalPackets 872 pmpXponOnuWifiTxErrPackets 873 pmpXponOnuWifiTxDiscardPackets 874 pmpXponOnuWifiRxTotalPackets 875 pmpXponOnuWifiRxErrPackets 876 pmpXponOnuWifiRxDiscardPackets 877 pmpXponOnuWifiTransQualityLevel 878 pmpXponOnuWifiDsRate 879 pmpXponOnuWifiUsRate 880 pmpXponOnuWifiRSSI 881 pmpXponOnuWifiSNR 882 pmpXponOnuWifiSignalQualityLevel 883 pmpXponOnuWifiIneighborAP 884 pmpXponOnuWifiAPFactor 885 pmpEponUni2gChannelUsRate 886 pmpEponUni2gChannelUsErrorPacketsRatio 887 pmpEponUni2gChannelUsDiscardBytes 888 pmpEponUni2gChannelUsDiscardPackets 889 pmpEponUni2gChannelUsErrorPackets 950 pmpCmStatus 951 pmpCmUsWidth 952 pmpCmUsFrequency 953 pmpCmUsCmtsEqd 954 pmpCmUsActEqd 955 pmpCmUsSnr 956 pmpCmUsYxPower 957 pmpCmUsGoodcode 958 pmpCmUsCorrected 959 pmpCmUsUncorrected 960 pmpCmUsCcer 961 pmpCmUsUcer 962 pmpCmDsFrequency 963 pmpCmDsSnr 964 pmpCmDsRxPower 965 pmpCmDsCcer 966 pmpCmDsUcer 967 pmpCmDsGoodcode 968 pmpCmDsCorrected 969 pmpCmDsUncorrected 970 pmpMaxDsSNR 971 pmpMinDsSNR 972 pmpPrimaryDs 973 pmpPrimaryUs 974 pmpRxByte 975 pmpTxByte 976 pmpSuccessReg 977 pmpFailReg 978 pmpRepeatReg 979 pmpStationMaintenance 980 pmpStationMaintenanceMiss 981 pmpStationMaintainConMiss 982 pmpPowerAdjust 983 pmpSeverelyPowerAdjust 984 pmpUnstableConnection 985 pmpMaxUsSNR 986 pmpMinUsSNR 987 pmpCmDocsisVer 988 pmpCmUsIucId 989 pmpCmDsProfileId 990 pmpUsIucQam 991 pmpDsProfileQam 992 pmpUsIucCapa 993 pmpDsProfileCapa 994 pmpCmD20Num 995 pmpCmD30Num 996 pmpCmD31Num 997 pmpD31MaxSpeed 998 pmpCmIpv4Addr 1000 pmpQueueStatsDroppedYellowPackets 1001 pmpQueueStatsDroppedGreenPackets 1002 pmpQueueStatsDroppedUnRecognizedColorPackets 1003 pmpQueueStatsPassedPackets 1004 pmpQueueStatsPassedBytes 1005 pmpQueueStatsIntervalValid 1006 pmpQueueStatsPassedGreenBytes 1007 pmpQueueStatsPassedGreenNumber 1008 pmpQueueStatsPassedYellowBytes 1009 pmpQueueStatsPassedYellowNumber 1100 pmpCableChlUsRecvbyte 1101 pmpCableChlUsSnr 1102 pmpCableChlUsGoodFeccode 1103 pmpCableChlUsCorrectedFeccode 1104 pmpCableChlUsUncorrectedFeccode 1105 pmpCableChlUsCorrectedErrcodepercent 1106 pmpCableChlUsUncorrectedErrcodepercent 1107 pmpCableChlUsPer 1108 pmpCableChlUsUtilization 1109 pmpCableChlUsCmnumTotal 1110 pmpCableChlUsCmnumOnline 1111 pmpCableChlUsCmnumOffline 1112 pmpCableChlUsCmnumInit 1113 pmpCableChlUsCmnumReject 1114 pmpCableChlUsReregtimes 1115 pmpCableChlDsSendbyte 1116 pmpCableChlDsUtilization 1117 pmpCableChlDsCmnumTotal 1118 pmpCableChlDsCmnumOnline 1119 pmpCableChlDsCmnumOffline 1120 pmpCableChlDsCmnumInit 1121 pmpCableChlDsCmnumReject 1122 pmpXponOnuWifiTransmissionCurrChannel 1123 pmpXponOnuWifiTransmissionBandwidth 1124 pmpXponOnuWifiTransmissionNoise 1125 pmpXponOnuWifiTransmissionGlitch 1126 pmpXponOnuWifiTransmissionACSScore 1127 pmpXponOnuWifiStaInfoTxPhyRate 1128 pmpXponOnuWifiStaInfoRxPhyRate 1129 pmpGponUni1gChannelUsRate 1130 pmpGponUni1gChannelDsRate 1131 pmpGponUni1gChannelTranOcts 1132 pmpGponUni1gChannelRecvOcts 1133 pmpGponUni1gChannelTranPacket 1134 pmpGponUni1gChannelRecvPacket 1135 pmpGponUni1gChannelRxDiscardPackets 1136 pmpGponUni1gChannelTxDiscardPackets 1137 pmpGponUni10gChannelUsRate 1138 pmpGponUni10gChannelDsRate 1139 pmpGponUni10gChannelTranOcts 1140 pmpGponUni10gChannelRecvOcts 1141 pmpGponUni10gChannelTranPacket 1142 pmpGponUni10gChannelRecvPacket 1143 pmpGponUni10gChannelRxDiscardPackets 1144 pmpGponUni10gChannelTxDiscardPackets 1145 pmpGponUniSendGreenBytes 1146 pmpGponUniSendGreenPackets 1147 pmpGponUniTxDiscardGreenPackets 1148 pmpGponUniSendYellowBytes 1149 pmpGponUniSendYellowPackets 1150 pmpGponUniTxYellowGreenPackets	.1.3.6.1.4.1.2011.6.103.1.1.4.1.15

This table is used for querying information about the history
files saved by the statistical object. 
The indexes of this table are hwBulkFileIndex and hwBulkSaveFileIndex.
This table does not support operations such as create, modify and delete, 
but supports get and walk operations.

hwBulkSaveFileEntry row .1.3.6.1.4.1.2011.6.103.1.1.5.1

This table is used for querying information about the history
files saved by the statistical object.
The indexes of this entry are hwBulkFileIndex and hwBulkSaveFileIndex.
This table does not support operations such as…

Indexes

hwBulkFileIndex hwBulkSaveFileIndex

Column	Syntax	OID
hwBulkSaveFileIndex Index of bulk file copy. It is a unique identifier for a bulk save file.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.1.1.5.1.1
hwBulkSaveFileTime Time of saving the statistics file.	OctetString Constraints: range: 1-20	.1.3.6.1.4.1.2011.6.103.1.1.5.1.2

Indicates the statistical condition table, on which users can add, delete, 
or modify statistical conditions. Before adding a statistical condition, 
use hwBulkFileTable to configure a statistical task. To delete a statistical condition, 
use hwBulkFileCollectRowStatus. Before deleting a statistical task, use hwBulkFileConditionTable 
to delete corresponding statistical conditions. To modify an existing statistical condition, modify 
the value of the hwBulkFileCollectCondition field.Statistical conditions can be issued in hexadecimal notation or using a character string.
The index of this table is hwBulkFileObjectMainType, hwBulkFileObjectSubType and hwBulkFileCollectInterval.

hwBulkFileConditionEntry row .1.3.6.1.4.1.2011.6.103.1.1.8.1

Indicates the statistical condition table, on which users can add, delete,
or modify statistical conditions. Before adding a statistical condition,
use hwBulkFileTable to configure a statistical task. To delete a stat…

Indexes

hwBulkFileObjectMainType hwBulkFileObjectSubType hwBulkFileCollectInterval

Column	Syntax	OID
hwBulkFileCollectCondition Statistical condition.	OctetStringr/w Constraints: range: 1-200	.1.3.6.1.4.1.2011.6.103.1.1.8.1.1
hwBulkFileCollectRowStatus Row status of the statistical condition.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.103.1.1.8.1.2

OID management table in the bulk file. Prerequisite for the operation is that the 
bulk file is listed in the hwBulkFileTable and the file state is ready.
The indexes of this table are hwBulkOID and hwBulkFileIndex in hwBulkFileTable.                 
In the case of the distributed bulk performance statistics, this table is not supported.

hwBulkOIDEntry row .1.3.6.1.4.1.2011.6.103.1.2.1.1

OID management table in the bulk file. Prerequisite for the operation is that the
bulk file is listed in the hwBulkFileTable and the file state is ready.
The indexes of this entry are hwBulkOID and hwBulkFileIndex in h…

Indexes

hwBulkFileIndex hwBulkOID

Column	Syntax	OID
hwBulkOID Index in the case of adding the object in the statistics file. The OID of the object is collected. The OID need not contain the index. The maximum length of the OID (excluding '.') is 20 digits.	ObjectIdentifier	.1.3.6.1.4.1.2011.6.103.1.2.1.1.1
hwBulkOIDRowStatus Row operation object hwBulkOIDRowStatus. When the creation operation is performed in hwBulkOIDRowStatus, the enumeration value createAndGo (4) is used. During the creation operation, hwBulkFileIndex a…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.103.1.2.1.1.2

Object management table in the bulk file,
providing add/delete operations.
Prerequisite for the operation is that the 
bulk file is listed in hwBulkFileTable 
and the file state is ready.
The indexes of this table are hwBulkObjectIndex and hwBulkFileIndex in hwBulkFileTable.
The object hwBulkObjectOIDIndex can be used to configure a precise index or a fuzzy index.
When one MIB object has multiple indexes, a '.' is used to separate the indexes.
For example, in a MIB table with the shelf ID/slot ID/port ID as the index, 
when you need to collect the information about shelf 0/slot 5/port 2,
configure a precise index, namely, a character string 0.5.2.
When you need to collect the information about all the ports in slot 5 of shelf 0, 
configure a fuzzy index, namely, a character string 0.5.all. all is used to represent fuzzy index.
When you need to collect the information about all the ports, use a fuzzy index all.all.all.
In the case of the distributed bulk performance statistics, this table is not supported.

hwBulkObjectEntry row .1.3.6.1.4.1.2011.6.103.1.3.2.1

Object management table in the bulk file,
providing add/delete operations.
Prerequisite for the operation is that the
bulk file is listed in hwBulkFileTable
and the file state is ready.
The indexes of this entry are h…

Indexes

hwBulkFileIndex hwBulkObjectIndex

Column	Syntax	OID
hwBulkObjectIndex Object index in the Bulk file. A unique identifier for a record, indicating the sequence of objects.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.1.3.2.1.1
hwBulkObjectOIDIndex Start index of objects in a task, for each task there can be many start index.In order to get a value , a complete OID can be formed by adding the hwBulkOID in hwBulkOIDTable and the hwBulkObjectOIDIndex from hwBulkObj…	OctetStringr/w Constraints: range: 1-63	.1.3.6.1.4.1.2011.6.103.1.3.2.1.2
hwBulkObjectLengthobsolete Number of continuous objects. The default value is 1, indicating that only this object value will be collected.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.1.3.2.1.3
hwBulkObjectRowStatus Row operation object hwBulkObjectRowStatus. The enumeration value destroy (6) is used for the deletion.During the deletion operation, the indexes hwBulkFileIndex and hwBulkObjectIndex must be issued together. When the…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.103.1.3.2.1.4

This table is used to add or delete the statistical 
index in the configuration of the statistics file.
The indexes of this table are hwBulkObjectCapItem and hwBulkFileIndex in hwBulkFileTable.
This table does not support the modify operation.
In the case of the distributed bulk performance statistics, this table cannot be operated.

hwBulkObjectCapItemEntry row .1.3.6.1.4.1.2011.6.103.1.5.1.1

This table is used to add or delete the statistical
index in the configuration of the statistics file.
The indexes of this entry are hwBulkObjectCapItem and hwBulkFileIndex in hwBulkFileTable.
This table does not suppo…

Indexes

hwBulkFileIndex hwBulkObjectCapItem

Column	Syntax	OID
hwBulkObjectCapItem Statistical task index, which is used for setting the performance data items for a statistical task.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.1.5.1.1.1
hwBulkObjectCapItemRowStatus Row operation object. When the statistics file is running, the statistical index can be added or deleted. The adding or deletion takes effect after the next period of the statistics file. Each statistics file can be c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.103.1.5.1.1.2

FTP client management table is used for transferring the statistics file,  
and providing add/delete operations. The host servers as client, 
while the NMS as server. The index of this table is hwFTPClientIndex.  
The operation for this table can be successful only when the bulk 
collection of the backup files is successful.

hwFTPClientEntry row .1.3.6.1.4.1.2011.6.103.2.1.2.1

FTP client management table is used for transferring the statistics file,
and providing add/delete operations. The host servers as client,
while the NMS as server. The index of this entry is hwFTPClientIndex.
The ope…

Indexes

hwFTPClientIndex

Column	Syntax	OID
hwFTPClientIndex FTP client index, an unique identifier of a record.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.2011.6.103.2.1.2.1.1
hwFTPClientMode FTP mode: ftp(1), tftp(2), sftp(3) Options: 1.ftp(1) -FTP client mode. 2.tftp(2) -TFTP client mode. 3.sftp(3) -SFTP client mode. If FTP/SFTP is used to transfer files, hwFTPClientUserName and hwFTPClientPasswd need to …	Enumerationr/w Enumerated Values: 1 ftp 2 tftp 3 sftp	.1.3.6.1.4.1.2011.6.103.2.1.2.1.2
hwFTPClientOper File transfer format. Options: 1.putBinary(1) -file transfer format is putBinary.	Enumerationr/w Enumerated Values: 1 putBinary	.1.3.6.1.4.1.2011.6.103.2.1.2.1.3
hwFTPClientFileName Source file name. In the case of centralized bulk performance statistics, the format is 'copy index of the latest file + / + name of the statistics file'. For example, if the statistical task is ABCD and you need to ob…	OctetStringr/w Constraints: range: 1-254	.1.3.6.1.4.1.2011.6.103.2.1.2.1.4
hwFTPDestFileName Destination file name, including path. In the centralized bulk performance statistics collection, the format of the file name is 'path name + | + destination file name'. For the purpose of saving FTP connections, when …	OctetStringr/w Constraints: range: 1-254	.1.3.6.1.4.1.2011.6.103.2.1.2.1.5
hwFTPClientServerIP IP address of the FTP server.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.103.2.1.2.1.6
hwFTPClientUserName User name for FTP/SFTP connection. For the TFTP mode, this field is invalid.	OctetStringr/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.6.103.2.1.2.1.7
hwFTPClientPasswd Password for FTP/SFTP connection. For the TFTP mode, this field is invalid.	OctetStringr/w Constraints: range: 0-15	.1.3.6.1.4.1.2011.6.103.2.1.2.1.8
hwFTPClientIfIndex IfIndex in the bulk file in order to get all data with IfIndex as the object index. If the IfIndex equals to zero, the final file will be filled with all data in current memory.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.2.1.2.1.9
hwFTPClientState FTP operation status: Options: 1.running(1) -indicates that FTP is running. If you set this object as running, …	Enumeration Enumerated Values: 1 running 2 success 3 fileOpenFail 4 unreachableServerIp 5 linkFailed 6 authenticateFailed 7 fileReadFailed 8 fileWriteFailed 9 failed	.1.3.6.1.4.1.2011.6.103.2.1.2.1.10
hwFTPClientRowStatus Row operation object. createAndGo(4)is supplied to create a new instance of a conceptual row. destroy(6)is supplied to delete the instances associated with an existing conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.103.2.1.2.1.11
hwFTPClientServerPort In SFTP port.FTP and TFTP modes, this field is invalid.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.2.1.2.1.12
hwFTPClientNum Indicates the maximum number of concurrent FTP/SFTP processes. For the TFTP mode, this field is invalid.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.2.1.2.1.13
hwFTPClientServerInetAddressType The type of address in hwFTPClientServerInetAddress.	Enumerationr/w Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.2011.6.103.2.1.2.1.14
hwFTPClientServerInetAddress The IPv4 or IPv6 address of the BACKUP Server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.2011.6.103.2.1.2.1.15

TCA Management Table. This object is not supported currently.
The indexes of this table are hwDefineFacilityType, hwDefineMontype, hwDefineAid and hwDefineTmper.

hwDefineTCAEntry row .1.3.6.1.4.1.2011.6.103.3.1.1.1

TCA Management Table. This object is not supported currently.
The indexes of this entry are hwDefineFacilityType, hwDefineMontype, hwDefineAid and hwDefineTmper.

Indexes

hwDefineFacilityType hwDefineMontype hwDefineAid hwDefineTmper

Column	Syntax	OID
hwDefineFacilityTypeobsolete Facility type. This object is not supported currently. Options: 1.system(1) -indicates facility type is system. 2.igmp(2) -indicates facility type is igmp. 3.dhcp(3) -indicates facility type is dhcp. 4.eapo…	Enumeration Enumerated Values: 1 system 2 igmp 3 dhcp 4 eapol 5 vlan 100 ampeth 200 xdsladsl	.1.3.6.1.4.1.2011.6.103.3.1.1.1.1
hwDefineMontypeobsolete Type of the monitored object Options: 1.cpu(1) -cpu 2.memory(2) -memory 3.rxdd(3) -The number of DHCP DISCOVER. 4.rxdrq(4) -The number of DHCP REQUEST. 5.rxdrl(5) -The number of DHCP RELEASE. …	Enumeration Enumerated Values: 1 cpu 2 memory 3 rxdd 4 rxdrq 5 rxdrl 6 rxdi 7 rxuntrust 8 rxovl 9 rxovlopt 10 rxdisp 11 txdisp 12 rxgqpm 13 rxsqpm 14 rxrpv2m 15 rxerpv2m 16 rxrpv3m 17 rxerpv3m 18 rxlpm 19 txgqpm 20 txsqpm 21 txrpv2m 22 txerpv2m 23 txlpm 24 acpm 25 acum 26 rxinvpm 27 rxrpv1u 28 rxerpv1u 29 rxrpv2u 30 rxerv2u 31 rxrpv3u 32 rxerpv3u 33 rxlpv2u 34 txgqpu 35 txsqpu 36 rxinvpu 37 rxeapf 38 txeapf 39 rxeapsf 40 rxeaplf 41 rxeaprf 42 rxeappf 43 rxieapf 44 rxleeapf 100 ethCrc 101 ethUnderpkt 102 ethOverpkt 103 ethStatsfrag 104 ethStajavvers 200 modemInitline 201 modemInitfial 202 modemFecs 203 modemEs 204 modemSes 205 modemLoss 206 modemUas 207 modemChcrc 208 modemChfec	.1.3.6.1.4.1.2011.6.103.3.1.1.1.2
hwDefineAidobsolete Index of the monitored object. This object is not supported currently.	OctetString	.1.3.6.1.4.1.2011.6.103.3.1.1.1.3
hwDefineTmperobsolete Monitoring period. This object is not supported currently. Options: 1.fifteenMinutes(1) -monitoring period is fifteen minutes. 2.oneday(2) -monitoring period is one day.	Enumeration Enumerated Values: 1 fifteenMinutes 2 oneday	.1.3.6.1.4.1.2011.6.103.3.1.1.1.4
hwDefineThlevobsolete Threshold of the monitored object. This object is not supported currently.	OctetStringr/w Constraints: range: 1-6	.1.3.6.1.4.1.2011.6.103.3.1.1.1.5
hwDefineRowStatusobsolete Row status. This object is not supported currently.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.103.3.1.1.1.6

The index of this table is hwBatchQueryType.

hwBQueryCapabilityEntry row .1.3.6.1.4.1.2011.6.103.4.1.1.1

The index of this entry is hwBatchQueryType.

Indexes

hwBatchQueryType

Column	Syntax	OID
hwBatchQueryType Batch Query type. Options: 1.ontinfo(1)-ont info. 2.ontMulticastForwardingTable(2)-ont multicast forwarding table. 3.ontLearnedMac(3)-ont learned MAC. 4.macinfo(4)-MAC info. 5.xdslSegmentinfo(5)- status parameter…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.4.1.1.1.1
hwBatchQueryCapability Indicates the batch query capability. The capability is in the TLV format. The format of the TLV is shown in the following figure. --------------------------------------------------------- | TOTAL-LENGTH | TLV-TYPE | …	OctetString Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.103.4.1.1.1.2

The index of this table is hwBatchQuerySn.

hwBatchQuerySetEntry row .1.3.6.1.4.1.2011.6.103.4.1.2.1

The index of this entry is hwBatchQuerySn.

Indexes

hwBatchQuerySn

Column	Syntax	OID
hwBatchQuerySn Batch query SN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.4.1.2.1.1
hwBatchQueryCurrentType Current batch query type. Options: 1.ontinfo(1)-ont info. 2.ontMulticastForwardingTable(2)-ont multicast forwarding table. 3.ontLearnedMac(3)-ont learned MAC. 4.macinfo(4)-MAC info. 5.xdslSegmentinfo(5) - statu…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.4.1.2.1.2
hwBatchQueryParameter Indicates the batch query parameter to set. The parameter is in the TLV format and supports a maximum of 255 characters. The format of the TLV is shown in the following figure. The batch qu…	OctetStringr/w Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.103.4.1.2.1.3
hwBatchQueryRowStatus Row operation object. createAndGo(4)is supplied to create a new instance of a conceptual row. destroy(6)is supplied to delete the instances associated with an existing conceptual row..	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.103.4.1.2.1.4

The indexes of this table are hwBatchQuerySn and hwBatchQueryStartNo.

hwBatchQueryGetEntry row .1.3.6.1.4.1.2011.6.103.4.1.3.1

The indexes of this entry are hwBatchQuerySn and hwBatchQueryStartNo.

Indexes

hwBatchQuerySn hwBatchQueryStartNo

Column	Syntax	OID
hwBatchQueryStartNo Batch query Start NO.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.4.1.3.1.1
hwBatchQueryReturnNum Batch query return number .	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.103.4.1.3.1.2
hwBatchQueryReturnList List of batch query result. For example, MAC addresses queried in batches are as follows: 00.00.00.8C.02.01.0A.F0.00.00.00.01.01.02.FF.FF.FF.FF.FF.FF.FF.FF.00.00.0A.02.FF.FF.FF.FF.FF.FF.02.01.0A.F0.00.00.00.01.03.02.FF.…	OctetString	.1.3.6.1.4.1.2011.6.103.4.1.3.1.3
hwBatchQueryIsLast The result of batch query is the last one or not. Options: 1.islast(1)-last. 2.notlast(2)-not last.	Enumeration Enumerated Values: 1 islast 2 notlast	.1.3.6.1.4.1.2011.6.103.4.1.3.1.4

NMS collect information table, providing add/modify/delete operations.
The host severs as client, while the NMS as server.
The index of this table is hwCollectTableName.

hwCollectSetEntry row .1.3.6.1.4.1.2011.6.121.1.1.1

NMS collect information table, providing add/modify/delete operations.
The host severs as client, while the NMS as server.
The index of this entry is hwCollectTableName.

Indexes

hwCollectTableName

Column	Syntax	OID
hwCollectTableName The table name. It is in the format of ASCII code separated by '.'. If the table name is specified to a|b, the index is 97.124.98. Naming standard: In a table name, there should be one vertical line at most, and the l…	OctetString Constraints: range: 1-63	.1.3.6.1.4.1.2011.6.121.1.1.1.1
hwCollectOID Information of the OIDs. When the NMS adds the information about the entries, the value of the information in the format of 'parent object OID:OID of sub object 1, OID of sub object 2......'. This format is called entr…	OctetStringr/w Constraints: range: 0-127	.1.3.6.1.4.1.2011.6.121.1.1.1.2
hwCollectTableRowStatus Row status. createAndGo(4) is supplied to create a new instance of a conceptual row. destroy(6) is supplied to delete the instances associated with an existing conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.121.1.1.1.3

Backup collectinfo parameter table. This object is not supported currently.
The index of this table is hwBackupCollectInfoRequestID.

hwBackupCollectInfoParaEntry row .1.3.6.1.4.1.2011.6.121.3.1.1

Backup collectinfo parameter table. This object is not supported currently.
The index of this entry is hwBackupCollectInfoRequestID.

Indexes

hwBackupCollectInfoRequestID

Column	Syntax	OID
hwBackupCollectInfoServerIpAddrobsolete The IP address of server. This object is not supported currently.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.121.3.1.1.1
hwBackupCollectInfoModeobsolete Load protocol:tftp and MODEM currently supported. Options: 1.tftp(1) -indicates load protocol is tftp. 2.modem(2)-indicates load protocol is modem. 3.ftp(3) -indicates load protocol is ftp. 4.sftp(5) -indicates load …	Enumerationr/w Enumerated Values: 1 tftp 2 modem 3 ftp 5 sftp 6 other	.1.3.6.1.4.1.2011.6.121.3.1.1.2
hwBackupCollectInfoFileNameobsolete Backup file name.	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.2011.6.121.3.1.1.3
hwBackupCollectInfoUserNameobsolete The backup user name,which is necessary in FTP mode and SFTP mode while unnecessary in TFTP mode. This object is not supported currently.	OctetStringr/w Constraints: range: 1-31	.1.3.6.1.4.1.2011.6.121.3.1.1.4
hwBackupCollectInfoPasswordobsolete The backup user password, which is necessary in FTP mode and SFTP mode, while unnecessary in TFTP mode. This object is not supported currently.	OctetStringr/w Constraints: range: 1-16	.1.3.6.1.4.1.2011.6.121.3.1.1.5
hwBackupCollectInfoRequestIDobsolete The request index for xml. This object is not supported currently.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.121.3.1.1.6

This table is used for querying information in real time. 
The indexes of this table are hwQueryCondition and hwQueryContent.
When the table is issued, the length of the hwQueryCondition needs to be specified, 
and hwQueryCondition and hwQueryContent need to be converted into ASCII codes for issuing.              
For example, if you need to issue conditions for querying the ID and name 
of the alarm whose type is device and severity is critical, 
the issued hwQueryCondition is 1.3.6.1.4.1.2011.6.30.7.1.1.6=4, 1.3.6.1.4.1.2011.6.30.6.1.1.4=2, 
which can be converted into the ASCII 
code  49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.46.54.46.51.48.46.55.
46.49.46.49.46.54.61.52.44.49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.
46.54.46.51.48.46.54.46.49.46.49.46.52.61.50; 
the issued hwQueryContent is abc=1.3.6.1.4.1.2011.6.30.7.1.1:1,2, 
which can be converted into the ASCII code 97.98.99.61.49.46.51.46.54.46.
49.46.52.46.49.46.50.48.49.49.46.54.46.51.48.46.55.46.49.46.49.58.49.44.50. 
With the length of the hwQueryCondition, the finally issued index is 
63.49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.46.54.46.51.48.46.55.46.
49.46.49.46.54.61.52.44.49.46.51.46.54.46.49.46.52.46.49.46.50.48.49.49.46.
54.46.51.48.46.54.46.49.46.49.46.52.61.50.97.98.99.61.49.46.51.46.54.46.49.46.52.46.
49.46.50.48.49.49.46.54.46.51.48.46.55.46.49.46.49.58.49.44.50.

hwCfgInfoQueryEntry row .1.3.6.1.4.1.2011.6.121.4.1.1

This table is used for querying information in real time.
The indexes of this entry are hwQueryCondition and hwQueryContent.
When the table is issued, the length of the hwQueryCondition needs to be specified,
and hwQue…

Indexes

hwQueryCondition hwQueryContent

Column	Syntax	OID
hwQueryCondition Condition index string. The value is in the format of 'OID1=......, OID2=......'.	OctetString Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.121.4.1.1.1
hwQueryContent Query content. The format is 'name of entry 1 = OID of entry 1:OID number of sub object 1, OID number of sub object 2...... + name of entry 2 = OID of entry 2:number of sub object 1, number of sub object 2......'.	OctetString Constraints: range: 1-256	.1.3.6.1.4.1.2011.6.121.4.1.1.2
hwQueryResult Query result.	OctetString Constraints: range: 1-8192	.1.3.6.1.4.1.2011.6.121.4.1.1.3