HUAWEI-ATM-OAM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
27

hwAtmOamPointTable

table
.1.3.6.1.4.1.2011.6.11.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmOamPointTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-OAM-MIB::hwAtmOamPointTable' 
Table of OAM point.
The indexes of this table are ifIndex,hwAtmOamPointVPI and hwAtmOamPointVCI.
hwAtmOamPointEntry row .1.3.6.1.4.1.2011.6.11.1.1.1
Table of OAM point.
The indexes of this entry are ifIndex,hwAtmOamPointVPI and hwAtmOamPointVCI.
Indexes
Column Syntax OID
hwAtmOamPointVPI
vpi.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.6.11.1.1.1.1
hwAtmOamPointVCI
vci.
If vci = 0, it means that this is a F4 point
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.6.11.1.1.1.2
hwAtmOamPointType
OAM point type.
Options:
1. e2e(1) -e-t-e end point
2. segment(2) -segment end point
3. e2eInter(3) -connection point within two e-t-e points
4. segmentInter(4) -connection point with…
Enumerationr/w
Enumerated Values:
1e2e
2segment
3e2eInter
4segmentInter
 .1.3.6.1.4.1.2011.6.11.1.1.1.3
hwAtmOamPointAdminStatus
up(1) means enable; down(2) means disable.
Options:
1. up(1) -enable
2. down(2) -disable
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.6.11.1.1.1.4
hwAtmOamAlarmType
OAM point alarm type.
Options:
1. noAlarm(0) -no alarm
2. receiveAisCell(1) -received AIS cell
3. receiveRdiCell(2) -received RDI cell
4.loc(4) -lost of continuity (CC failed)
5.f…
Enumeration
Enumerated Values:
0noAlarm
1receiveAisCell
2receiveRdiCell
4loc
8f4Ais
16portAlarm
 .1.3.6.1.4.1.2011.6.11.1.1.1.5
hwAtmOamCfgFlag
OAM point configure recovering flag.
Options:
1.running(1) -OAM point in running stage
2.recovering(2) -OAM point in recovering stage
Enumeration
Enumerated Values:
1running
2recovering
 .1.3.6.1.4.1.2011.6.11.1.1.1.6
hwAtmOamFmStatus
OAM point FM status.
Options:
1. normal(1) -FM status is normal
2. ais(2) -FM status is ais
3. rdi(3) -FM status is rdi
Enumeration
Enumerated Values:
1normal
2ais
3rdi
 .1.3.6.1.4.1.2011.6.11.1.1.1.7
hwAtmOamFmStatusDateTime
The time when the OAM point entered this FM status.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.2011.6.11.1.1.1.8
hwAtmOamPointRowStatus
OAM point table row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.11.1.1.1.9

hwAtmOamCcTable

table
.1.3.6.1.4.1.2011.6.11.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmOamCcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-OAM-MIB::hwAtmOamCcTable' 
Table of CC end point.
Refer to the definition of the OAM point table.
The indexes of this table are ifIndex,hwAtmOamCcVPI and hwAtmOamCcVCI.
hwAtmOamCcEntry row .1.3.6.1.4.1.2011.6.11.1.2.1
Table of CC end point.
Refer to the definition of the OAM point table.
The indexes of this entry are ifIndex,hwAtmOamCcVPI and hwAtmOamCcVCI.
Indexes
Column Syntax OID
hwAtmOamCcVPI
vpi.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.6.11.1.2.1.1
hwAtmOamCcVCI
vci.
If vci = 0, it means that this is a F4 point
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.6.11.1.2.1.2
hwAtmOamCcDirection
OAM CC direction.
Options:
1. sink(1) -OAM CC direction is sink
2. source(2) -OAM CC direction is source
3. both(3) -OAM CC direction is both
Enumerationr/w
Enumerated Values:
1sink
2source
3both
 .1.3.6.1.4.1.2011.6.11.1.2.1.3
hwAtmOamConfType
OAM CC configure type,only valid for up or down operating.
Options:
1. autoConfig(1) -active/deactive CC by A/D protocol
2. manualConfig(2) -active/deactive CC by TMN entirely. see I.610
Enumerationr/w
Enumerated Values:
1autoConfig
2manualConfig
 .1.3.6.1.4.1.2011.6.11.1.2.1.4
hwAtmOamCcAdminStatus
up(1) means enable; down(2) means disable.
Options:
1. up(1) -enable
2. down(2) -disable
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.2011.6.11.1.2.1.5
hwAtmOamCcRowStatus
OAM CC end point table row status.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.6.11.1.2.1.6

hwAtmOamLbTable

table
.1.3.6.1.4.1.2011.6.11.1.3 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmOamLbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-OAM-MIB::hwAtmOamLbTable' 
Table of ATM OAM loopback, it is used for setting flow loopback.
The indexes of this table are ifIndex,hwAtmOamLbVPI and hwAtmOamLbVCI.
hwAtmOamLbEntry row .1.3.6.1.4.1.2011.6.11.1.3.1
Table of ATM OAM loopback, it is used for setting flow loopback.
The indexes of this entry are ifIndex,hwAtmOamLbVPI and hwAtmOamLbVCI.
Indexes
Column Syntax OID
hwAtmOamLbVPI
Vpi of the OAM loopback flow.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.6.11.1.3.1.1
hwAtmOamLbVCI
Vci of the OAM loopback flow.
If vci = 0, means that this is a F4 point.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.6.11.1.3.1.2
hwAtmOamLbType
OAM loopback type.
Options:
1. e2e(1) -end to end loopback
2. segment(2) -segment loopback
3. llid(3) -specified llid loopback
4. noloopback(4) -stopping loopback
Enumerationr/w
Enumerated Values:
1e2e
2segment
3llid
4noloopback
 .1.3.6.1.4.1.2011.6.11.1.3.1.3
hwAtmOamLbPointLLID
Specify loopback destination LLID.
It is valid to be set llid(3) for hwAtmOamLbType only.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.11.1.3.1.4
hwAtmOamLbNumber
Specify the number of the cells loopbacked.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.2011.6.11.1.3.1.5
hwAtmOamLbInterval
Specify the interval between two insert operation.
Integer32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.2011.6.11.1.3.1.6

hwAtmOamLlidTable

table
.1.3.6.1.4.1.2011.6.11.1.4 · 1 row entry · 1 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmOamLlidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-OAM-MIB::hwAtmOamLlidTable' 
Table of OAM LLID.
The index of this table is ifIndex.
hwAtmOamLlidEntry row .1.3.6.1.4.1.2011.6.11.1.4.1
Table of OAM LLID.
The index of this entry is ifIndex.
Indexes
Column Syntax OID
hwAtmOamLlidPointLLID
local interface LLID.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.2011.6.11.1.4.1.1

hwAtmOamInsertTable

table
.1.3.6.1.4.1.2011.6.11.1.5 · 1 row entry · 5 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwAtmOamInsertTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-OAM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-OAM-MIB::hwAtmOamInsertTable' 
Table of OAM Insert.
This table only support 'set' operation.
The indexes of this table are ifIndex,hwAtmOamInsertVPI and hwAtmOamInsertVCI.
hwAtmOamInsertEntry row .1.3.6.1.4.1.2011.6.11.1.5.1
Table of OAM Insert.
This table only support 'set' operation.
The indexes of this entry are ifIndex,hwAtmOamInsertVPI and hwAtmOamInsertVCI.
Indexes
Column Syntax OID
hwAtmOamInsertVPI
vpi.
ATM-TC-MIBAtmVpIdentifier
Type Constraints:
range: 0..4095
 .1.3.6.1.4.1.2011.6.11.1.5.1.1
hwAtmOamInsertVCI
vci.
if vci = 0, means that this is a F4 point.
ATM-TC-MIBAtmVcIdentifier
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.2011.6.11.1.5.1.2
hwAtmOamInsertOperation
specify the operation(begin or stop) of the insertion.
Options:
1. start(1) -the operation of the insertion is begin
2. stop(2) -the operation of the insertion is stop
Enumerationr/w
Enumerated Values:
1start
2stop
 .1.3.6.1.4.1.2011.6.11.1.5.1.3
hwAtmOamInsertSegment
specify the segment type.
Options:
1. segment(1) -specify the segment type is segment
2. end(2) -specify the segment type is end
Enumerationr/w
Enumerated Values:
1segment
2end
 .1.3.6.1.4.1.2011.6.11.1.5.1.4
hwAtmOamInsertCellType
specify the type of the inserted cell.
Options:
1. ais(1) -specify the type of the inserted cell is ais
2. rdi(2) -specify the type of the inserted cell is rdi
3. cc(3) -specify the typ…
Enumerationr/w
Enumerated Values:
1ais
2rdi
3cc
 .1.3.6.1.4.1.2011.6.11.1.5.1.5