HUAWEI-ATM-CM-RM-MIB

        The MIB is used for defining huawei's ATM CM RM MIB objects.
    
Source file
HUAWEI-ATM-CM-RM-MIB
Last revised
Identity
hwAtmCmRm
Base OID
1.3.6.1.4.1.2011.5.10
Net-SNMP examples using the huawei MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HUAWEI-ATM-CM-RM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HUAWEI-ATM-CM-RM-MIB::hwAtmCmRm'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-ATM-CM-RM-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-ATM-CM-RM-MIB::hwAtmCmRm'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (45)
.1.3.6.1.4.1.2011.5.10
.1.3.6.1.4.1.2011.5.10.1
.1.3.6.1.4.1.2011.5.10.1.1
.1.3.6.1.4.1.2011.5.10.1.1.1
.1.3.6.1.4.1.2011.5.10.10
Enumeration
.1.3.6.1.4.1.2011.5.10.10.1
.1.3.6.1.4.1.2011.5.10.10.10
.1.3.6.1.4.1.2011.5.10.10.11
.1.3.6.1.4.1.2011.5.10.10.12
.1.3.6.1.4.1.2011.5.10.10.13
.1.3.6.1.4.1.2011.5.10.10.14
.1.3.6.1.4.1.2011.5.10.10.15
.1.3.6.1.4.1.2011.5.10.10.16
.1.3.6.1.4.1.2011.5.10.10.17
.1.3.6.1.4.1.2011.5.10.10.18
.1.3.6.1.4.1.2011.5.10.10.19
.1.3.6.1.4.1.2011.5.10.10.2
.1.3.6.1.4.1.2011.5.10.10.20
.1.3.6.1.4.1.2011.5.10.10.21
Integer32
.1.3.6.1.4.1.2011.5.10.10.3
.1.3.6.1.4.1.2011.5.10.10.4
.1.3.6.1.4.1.2011.5.10.10.5
.1.3.6.1.4.1.2011.5.10.10.6
.1.3.6.1.4.1.2011.5.10.10.7
.1.3.6.1.4.1.2011.5.10.10.8
.1.3.6.1.4.1.2011.5.10.10.9
.1.3.6.1.4.1.2011.5.10.11
.1.3.6.1.4.1.2011.5.10.11.1
.1.3.6.1.4.1.2011.5.10.11.1.0
.1.3.6.1.4.1.2011.5.10.11.2
.1.3.6.1.4.1.2011.5.10.11.2.0
.1.3.6.1.4.1.2011.5.10.2
.1.3.6.1.4.1.2011.5.10.2.1
Enumeration
.1.3.6.1.4.1.2011.5.10.2.1.1
.1.3.6.1.4.1.2011.5.10.2.1.2
.1.3.6.1.4.1.2011.5.10.3
.1.3.6.1.4.1.2011.5.10.3.1
Enumeration
.1.3.6.1.4.1.2011.5.10.3.1.1
.1.3.6.1.4.1.2011.5.10.3.1.2
.1.3.6.1.4.1.2011.5.10.3.1.3
.1.3.6.1.4.1.2011.5.10.3.1.4
.1.3.6.1.4.1.2011.5.10.3.1.5
Enumeration
.1.3.6.1.4.1.2011.5.10.3.1.6
Integer32
.1.3.6.1.4.1.2011.5.10.3.1.7
Enumeration
.1.3.6.1.4.1.2011.5.10.3.1.8
Dependencies (22) 8 direct · 14 transitive 1 missing Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Missing modules remain in the tree but are omitted from the compile order because no source is available in this catalogue.
Dependency tree
Notifications / Traps (4)
NameOIDDescription
.1.3.6.1.4.1.2011.5.10.11.1.0.1
This trap is sent when the CM VC CXC change.
The value -1 that is reported through the trap indicates that the parameter is invalid.
.1.3.6.1.4.1.2011.5.10.11.1.0.2
This trap is sent when the PVC encapsulation is changed.
.1.3.6.1.4.1.2011.5.10.11.1.0.3
This trap is sent when the VPI VCI auto sense.
The value -1 that is reported through the trap indicates that the parameter is invalid.
.1.3.6.1.4.1.2011.5.10.11.2.0.1
This trap is sent when MAC addresses in the MAC address pool are exhausted and
the PPPoA or IPoA user fails to apply for a source MAC address.