HUAWEI-AR-SERIAL-CONNECT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
39

hwGpioTable

table
.1.3.6.1.4.1.2011.5.25.338.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwGpioTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-AR-SERIAL-CONNECT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-AR-SERIAL-CONNECT-MIB::hwGpioTable' 
Indicates the functions of GPIO port.
This table lists the base setting information of GPIO port to realize the function of DI/DO.
hwGpioEntry row .1.3.6.1.4.1.2011.5.25.338.1.1.1
Indicates the functions of GPIO port.
This table lists the base setting information of GPIO port to realize the function of DI/DO.
Indexes
Column Syntax OID
hwGpioId
Indicates current used GPIO id on the device .
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.2011.5.25.338.1.1.1.1
hwGpioMode
Indicates the GPIO work mode,the default value is di.
Enumerationr/w
Enumerated Values:
0di
1do
 .1.3.6.1.4.1.2011.5.25.338.1.1.1.2
hwGpioDOLevel
Indicates the current level of DO mode.When the current GPIOID is in DI mode,the value is null.
Enumerationr/w
Enumerated Values:
0low
1high
2null
 .1.3.6.1.4.1.2011.5.25.338.1.1.1.3
hwGpioDIState
Indicates the current state of DI mode.When the current GPIOID is in DO mode,the value is null.
Enumeration
Enumerated Values:
0low
1high
2null
 .1.3.6.1.4.1.2011.5.25.338.1.1.1.4
hwGpioDODefaultLevel
Indicates the default state of DO mode.When the current GPIOID is in DI mode,the value is null.
Enumeration
Enumerated Values:
0low
1high
2null
 .1.3.6.1.4.1.2011.5.25.338.1.1.1.5
hwGpioDIFailReason
Indicates the default FailReason of DI.
Enumeration
Enumerated Values:
0null
1acfailure
2batterylow
 .1.3.6.1.4.1.2011.5.25.338.1.1.1.6

hwTransportSessionTable

table
.1.3.6.1.4.1.2011.5.25.338.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTransportSessionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-AR-SERIAL-CONNECT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-AR-SERIAL-CONNECT-MIB::hwTransportSessionTable' 
Indicates the business of serial transportation.This table lists the session information of the serial.
hwTransportSessionEntry row .1.3.6.1.4.1.2011.5.25.338.1.2.1
Indicates the business of serial transportation.
This table lists the session information of the remote serial.
Indexes
Column Syntax OID
hwTtyId
Inicates the current tty index .
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.1
hwTransportMode
Indicates the current used mode of transparent.During mode switching,
if the current communication parameter configuration is not the default configuration ,the mode switching is not allowed.
Enumerationr/w
Enumerated Values:
0none
1raw
2t101
3modbus
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.2
hwTransportRemoteIP
Indicates the remote IP.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.3
hwTransportRemotePort
Indicates the remote port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.4
hwConnectDuration
Indicates the time when the connection begins.
OctetString
Constraints:
range: 0-256
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.5
hwBytesReceived
Statistics the number of packets received on current connection.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.6
hwBytesSend
Statistics the number of packets sent on current connection.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.7
hwConnectionNum
Statistics the number of connection on current serial.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.8
hwRefuseConnectionNum
Statistics the number of refuseing connection on current serial.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.9
hwMsgStatics
Statistics the number of transmitted and received packets on current connection.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.2.1.10

hwTransSessionOperateTable

table
.1.3.6.1.4.1.2011.5.25.338.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwTransSessionOperateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-AR-SERIAL-CONNECT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-AR-SERIAL-CONNECT-MIB::hwTransSessionOperateTable' 
Indicates the business of serial transportation.
This table lists the session information of the serial.
hwTransSessionOperateEntry row .1.3.6.1.4.1.2011.5.25.338.1.3.1
Indicates the business of serial transportation.
This table lists the session information of the remote serial.
Indexes
Column Syntax OID
hwSessionIndex
Inicates the connection session id .
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.3.1.1
hwTransSessionSessionID
Indicates the current used connection session id.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.3.1.2
hwTransSessionRowStatus
This project used to create and delete a connection.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2011.5.25.338.1.3.1.3

hwSocketTransTable

table
.1.3.6.1.4.1.2011.5.25.338.1.4 · 1 row entry · 12 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwSocketTransTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-AR-SERIAL-CONNECT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-AR-SERIAL-CONNECT-MIB::hwSocketTransTable' 
Indicates the socket information.
This table lists the base communication of tcp/udp on serial socket.
hwSocketTransEntry row .1.3.6.1.4.1.2011.5.25.338.1.4.1
Indicates the socket information.
This table lists the base communication of tcp/udp on serial socket.
Indexes
Column Syntax OID
hwSocketTransEnable
When current TTY ID is 1,this object used to switch the serial back and forth from management serial to bussiness serial.
TTY 2 is a bussiness serial,no need to switch.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.1
hwSocketTransType
Used to set or get the type used to transport.The default value is null(3),
meaning current serial is not configured for any operating mode.
Enumerationr/w
Enumerated Values:
0tcpServer
1tcpClient
2udp
3null
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.2
hwSocketTransPacketSize
Used to set or get max size of trans packets.The setting range is 16 - 1400.0 is default value.
Integer32r/w
Constraints:
range: 0-1400
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.3
hwSocketTransPacketTime
Indicates the packet encapsulation timer,the default value is 100ms,parameter units is ms.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.4
hwSocketTransSpecialChar
Indicates the byte of special characters used to specifie a packet end.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.5
hwSocketTransClientIP
Indicate the client IP when the serial is worked in tcp server,
this project can also be the client local IP when the serial is worked in tcp client or udp client.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.6
hwSocketTransClientPort
Indicate the client port when the serial is worked in tcp server,
this project can also be the client local port when the serial is worked in tcp client or udp client.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.7
hwSocketTransServerIP
Indicate the local server ip when the serial is worked in tcp server,
this project can also be the server ip when the serial is worked in tcp client or udp client.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.8
hwSocketTransServerPort
Indicate the local listening server port when the serial is worked in tcp server,
this project can also be the server port when the serial is worked in tcp client or udp client
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.9
hwSocketTransTcpIdleTimeout
Indicates the interval time of the tcp link keep alive.
Integer32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.10
hwSocketTransBestEffort
When configuring a best effort mode, discarding older data cache first, otherwise discard newer data buffer.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.11
hwRawModeSocketTransEnable
Used to enable or disable the transport business on serial.When the transport business is enable,do not allowed to set socket param.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.5.25.338.1.4.1.12

hwModbusTransTable

table
.1.3.6.1.4.1.2011.5.25.338.1.5 · 1 row entry · 8 columns
Open in standard view
Uses the huawei variant from /opt/observium/mibs/huawei.
Command help
Walk hwModbusTransTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HUAWEI-AR-SERIAL-CONNECT-MIB' -M '/opt/observium/mibs/huawei:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HUAWEI-AR-SERIAL-CONNECT-MIB::hwModbusTransTable' 
Indicates the attribute of the conntection info of modbus.
This table lists the connection info of the modbus interface.
hwModbusTransEntry row .1.3.6.1.4.1.2011.5.25.338.1.5.1
Indicates the attribute of the conntection info of modbus.
This table lists the connection info of the modbus interface.
Indexes
Column Syntax OID
hwModbusTransEnable
The object used to enable/disable the modbus transport.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.2011.5.25.338.1.5.1.1
hwModbusTransServerIP
Indicates the Server IP of Modbus Transportation,the device as a server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.338.1.5.1.2
hwModbusTransServerPort
Indicates the Server Port of Modbus Transportation,the device as a server.
Modbus used port is 502 + hwModbusTransServerPort.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.5.1.3
hwModbusTransServerDestIP
Indicates the remote ip addr,only this ip can connect to the modbus server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.2011.5.25.338.1.5.1.4
hwModbusTransServerDestPort
Indicates the remote port,only this port can connect to the modbus server.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.2011.5.25.338.1.5.1.5
hwModbusTransServerFrameBufNum
Indicates the size of cache packets,the default value is 3.
Integer32r/w
Constraints:
range: 1-6
 .1.3.6.1.4.1.2011.5.25.338.1.5.1.6
hwModbusTransServerClientNum
Indicates the number of customers which allow to acess the server at the same time,
the default value is 1.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.2011.5.25.338.1.5.1.7
hwModbusTransSerialTimeout
Indicates the waitting time ,after the master send a message to the modbus slave.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.2011.5.25.338.1.5.1.8