HUAWEI-ADSL-EXT-MIB Table View

This table provides the channel parameters of the ATUR end of each port.
The index of this table is ifIndex.

hwadslAturChanInfoEntry row .1.3.6.1.4.1.2011.6.31.1.1.1

This table provides the channel parameters of the ATUR end of each port.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwadslAturChanCurrINPInfo Indicates Impulse Noise Protection on upstream direction. The value multiply 1/10000 is the real value. Unit: DMT Symbol	DMT SymbolSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.1
hwadslAturChanRsSymbolsInfo Indicates Reed-Solomon symbols on upstream direction. The value multiply 1/10000 is the real value. Unit: byte	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.2
hwadslAturChanRsRedundancyInfo Indicates Reed-Solomon redundancy on upstream direction. Unit: byte	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.3
hwadslAturChanRsDepthInfo Indicates Reed-Solomon depth on upstream direction. Unit: byte	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.4
hwadslAturChanSymbolLengthInfo Indicates the Bit Number of the DMT Symbol on upstream direction. Unit: bit	bitSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.5
hwadslAturChanPhyRrrcBitsInfo The bits in the channel that used to retransmission on upstream direction.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.6
hwadslAturChanPhyRtxQueueInfo Queues in send buffer on upstream direction.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.7
hwadslAturChanRsSizeInfo Indicates Reed-Solomon Codeword Size on upstream direction. Range: 0-255 Unit: byte	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.8
hwadslAturChanCodeGainInfo Indicates Code Gain on upstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.9
hwadslAturChanL2NetDataRate In L2 state, this parameter reports the Net Data Rate in low power state. The data rate is coded in steps of 1000 bit/s.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.1.1.10

This object provides the physical layer parameters of each ATUR.
The index of this table is ifIndex.

hwadslAturPhysInfoEntry row .1.3.6.1.4.1.2011.6.31.1.2.1

This object provides the physical layer parameters of each ATUR.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwadslAturTransmissionCapabilitiesInfo The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the ATU supports the respective coding. The value m…	ADSL2-LINE-TC-MIBAdsl2TransmissionModeType Type Values: 0 ansit1413 1 etsi 2 g9921PotsNonOverlapped 3 g9921PotsOverlapped 4 g9921IsdnNonOverlapped 5 g9921isdnOverlapped 6 g9921tcmIsdnNonOverlapped 7 g9921tcmIsdnOverlapped 8 g9922potsNonOverlapped 9 g9922potsOverlapped 10 g9922tcmIsdnNonOverlapped 11 g9922tcmIsdnOverlapped 12 g9921tcmIsdnSymmetric 13 reserved1 14 reserved2 15 reserved3 16 reserved4 17 reserved5 18 g9923PotsNonOverlapped 19 g9923PotsOverlapped 20 g9923IsdnNonOverlapped 21 g9923isdnOverlapped 22 reserved6 23 reserved7 24 g9924potsNonOverlapped 25 g9924potsOverlapped 26 reserved8 27 reserved9 28 g9923AnnexIAllDigNonOverlapped 29 g9923AnnexIAllDigOverlapped 30 g9923AnnexJAllDigNonOverlapped 31 g9923AnnexJAllDigOverlapped 32 g9924AnnexIAllDigNonOverlapped 33 g9924AnnexIAllDigOverlapped 34 g9923AnnexLMode1NonOverlapped 35 g9923AnnexLMode2NonOverlapped 36 g9923AnnexLMode3Overlapped 37 g9923AnnexLMode4Overlapped 38 g9923AnnexMPotsNonOverlapped 39 g9923AnnexMPotsOverlapped 40 g9925PotsNonOverlapped 41 g9925PotsOverlapped 42 g9925IsdnNonOverlapped 43 g9925isdnOverlapped 44 reserved10 45 reserved11 46 g9925AnnexIAllDigNonOverlapped 47 g9925AnnexIAllDigOverlapped 48 g9925AnnexJAllDigNonOverlapped 49 g9925AnnexJAllDigOverlapped 50 g9925AnnexMPotsNonOverlapped 51 g9925AnnexMPotsOverlapped 52 reserved12 53 reserved13 54 reserved14 55 reserved15	.1.3.6.1.4.1.2011.6.31.1.2.1.1
hwAdslAturCurrSignalAtnInfo The signal attenuation value on ATUR: It indicates the difference between the transmit signal of the ATU-C and the receive signal of the ATU-R. Range: 0-630 Unit: tenth dB	tenth dBUnsigned32 Constraints: range: 0-630	.1.3.6.1.4.1.2011.6.31.1.2.1.2
hwadslAturInvG994VendorId The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocated) provider code, as defined in Recommendation T.35.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.31.1.2.1.3
hwadslAturLInvSelfTestResult The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. The interpretation of the other octets is vendor discretiona…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.2.1.4

This object provides the channel parameters of each ATUC.
The index of this table is ifIndex.

hwadslAtucChanInfoEntry row .1.3.6.1.4.1.2011.6.31.1.3.1

This object provides the channel parameters of each ATUC.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwadslAtucChanCurrINPInfo Indicates Impulse Noise Protection on downstream direction. The value multiply 1/10000 is the real value. If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protect…	DMT SymbolSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.1
hwadslAtucChanRsSymbolsInfo Indicates Reed-Solomon symbols on downstream direction. The value multiply 1/10000 is the real value. Unit: byte	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.2
hwadslAtucChanRsRedundancyInfo Indicates Reed-Solomon redundancy on downstream direction. Unit: byte	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.3
hwadslAtucChanRsDepthInfo Indicates Reed-Solomon depth on downstream direction. Unit: byte	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.4
hwadslAtucChanSymbolLengthInfo Indicates the Bit Number of the DMT Symbol on downstream direction. Unit: bit	bitSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.5
hwadslAtucChanPhyRrrcBitsInfo The bits in the channel that used to retransmission on downstream direction.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.6
hwadslAtucChanPhyRtxQueueInfo Queues in send buffer on downstream direction.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.7
hwadslAtucChanRsSizeInfo Indicates Reed-Solomon Codeword Size on downstream direction. Range: 0-255 Unit: byte	byteSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.8
hwadslAtucChanCodeGainInfo Indicates Code Gain on downstream direction. It ranges from 0 to 16 units of 0.5 dB (physical values are 0 to 8 dB).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.9
hwadslAtucChanPcbInfo Indicates Power Cut-back on downstream direction. It ranges from 0 to 400 units of 0.1 dB (physical values are 0 to 40 dB) Unit: tenth dB	tenth dBSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.10
hwadslAtucChanActNetDataRate Independent whether retransmission is used or not in a given transmit direction: In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) at which the bearer channel is operat…	bits/secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.11
hwadslAtucChanActINPAgainstREIN If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditions detailed in G.998.4) on the bearer channel in the L0 s…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.12
hwadslAtucChanL2NetDataRate In L2 state, this parameter reports the Net Data Rate in low power state. The data rate is coded in steps of 1000 bit/s.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.3.1.13

This table contains information on the ADSL line configuration.
The index of this table is adslLineConfProfileName.

hwadslLineConfProfileCfgEntry row .1.3.6.1.4.1.2011.6.31.1.4.1

This table contains information on the ADSL line configuration.
The index of this entry is adslLineConfProfileName.

Indexes

ADSL-LINE-MIBadslLineConfProfileName

Column	Syntax	OID
hwAdslAtucConfDownBitSwapCfg Enables and disables the down bitswap of a template. Options: 1. enabled(1) - Indicates that the downstream bit swap is enabled 2. disabled(2) - Indicates that the downstream bit swap is disabled Default: enabled(1)	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.6.31.1.4.1.1
hwAdslAtucConfUpBitSwapCfg Enables and disables the up bitswap of a template. Options: 1. enabled(1) - Indicates that the upstream bit swap is enabled 2. disabled(2) - Indicates that the upstream bit swap is disabled Default: enabled(1)	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.6.31.1.4.1.2
hwAdslTrellionsModeEnableCfg Enables and disables the Trellions mode. Options: 1. enabled(1) - Indicates that the trellis coding is enabled. 2. disabled(2) - Indicates that the trellis coding is disabled. Default: enabled(1)	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.6.31.1.4.1.3
hwAdslTransmissionModeCfg Indicates the transmission mode of this channel. Options: 1. all(1) - All (G992.1, G992.2, T1.413)(Default) 2. fullRate(2) - Full rate(G992.1 or T1.413) 3. gliteOnly(3) - G992.2(g.lite) only 4. t1…	Enumerationr/w Enumerated Values: 1 all 2 fullRate 3 gliteOnly 4 t1413Only 5 gdmtOnly 6 ghs 7 g992Dot1 8 g992Dot2 9 g992Dot3 10 g992Dot4 11 g992Dot5 12 adslAllOnly 13 adslAndAdsl2	.1.3.6.1.4.1.2011.6.31.1.4.1.4

PVC configuration table of the ADSL port.
The indexes of this table are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci.

hwAdslLinePvcCfgEntry row .1.3.6.1.4.1.2011.6.31.1.5.1

PVC configuration table of the ADSL port.
The indexes of this entry are ifIndex,hwAdsllinePvcVpi,and hwAdsllinePvcVci.

Indexes

IF-MIBifIndex HUAWEI-ADSL-MIBhwAdsllinePvcVpi HUAWEI-ADSL-MIBhwAdslLinePvcVci

Column	Syntax	OID
hwAdslLinePvcVlanIdCfg The VLAN ID of the adsl line PVC. Range: 1-4000	Integer32r/w Constraints: range: 1-4000	.1.3.6.1.4.1.2011.6.31.1.5.1.3
hwAdslLinePvcPriorityCfg The Priority value of the adsl line PVC. Range: 0-7 Default: 0	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.6.31.1.5.1.4
hwAdslLinePvcDsBandCfg The down stream band of the adsl line PVC. Range: 0-450 Default: 0	Integer32r/w Constraints: range: 0-450	.1.3.6.1.4.1.2011.6.31.1.5.1.5
hwAdslLinePvcUsBandCfg The up stream band of the adsl line PVC. Range: 0-450	Integer32r/w Constraints: range: 0-450	.1.3.6.1.4.1.2011.6.31.1.5.1.6
hwAdslLinePvcMCastEnableCfg This object allows the adsl line PVC to support multicast. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support the multicast 2. disable(2) - Indicates that the PVC of the ADSL port is…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.31.1.5.1.7
hwAdslLinePvcIGMPEnableCfg This object allows the adsl line PVC to support IGMP. Options: 1. enable(1) - Indicates that the PVC of the ADSL port is enabled to support IGMP 2. disable(2) - Indicates that the PVC of the ADSL port is disabled to s…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.31.1.5.1.8
hwAdslLinePvcIndexCfg The index of the adsl line PVC. Range: 1-8	Integer32r/w Constraints: range: 1-8	.1.3.6.1.4.1.2011.6.31.1.5.1.9
hwAdslLinePvcConnectTypeCfg The Connected type of the adsl line PVC Options: 1. auto(0) - The Connected type of the adsl line PVC is auto 2. llc1483B(1) - The Connected type of the adsl line PVC is llc1483B 3. pppoaLLC(2) - The Connected type…	Enumeration Enumerated Values: 0 auto 1 llc1483B 2 pppoaLLC 3 pppoaVcmux 4 ipoaLLc 5 ipoaVcmux	.1.3.6.1.4.1.2011.6.31.1.5.1.10
hwAdslLinePvcRowStatusCfg Row status. Add or delete a table item.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.31.1.5.1.11

This table includes common attributes describing both ends of the line.
The index of this table is ifIndex.

hwadslLineCfgEntry row .1.3.6.1.4.1.2011.6.31.1.6.1

This table includes common attributes describing both ends of the line.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwadslLineExtConfProfileCfg The value of this object identifies the row in the ADSL Extend Line Configuration Profile Table, (adslLineExtConfProfileTable), which applies to this ADSL line, and channels if applicable. NULL - indicate…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.31.1.6.1.1
hwadslLineDynamicProfileCfg The value of this object identifies the row in the ADSL Dynamic Profile Table,which applies to this ADSL line, and channels if applicable. NULL - indicates that there is no Dynamic profile bound to this …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.6.31.1.6.1.2

This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation
information for the current link. This information can be used to determine 
whether a given sub-carrier loop has sufficient margin to support ADSL 
data rates, and possibly to determine whether certain specific types 
of interference or line attenuation exist. The bit allocation information 
are only valid when the ATU-C is in the C-ACTIVE state.
The index of this table is ifIndex.

hwAdslLineBitAllocationInfoEntry row .1.3.6.1.4.1.2011.6.31.1.7.1

This hwAdslLineBitAllocationInfoTable contains the detailed bit-allocation
information for the current link. This information can be used to determine
whether a given sub-carrier loop has sufficient margin to support …

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwAdslLineDownStreamBitsPerFrameInfo Number of bits required per frame in the downstream data path for the current configuration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.31.1.7.1.1
hwAdslLineUpStreamBitsPerFrameInfo Number of bits required per frame in the upstream data path for the current configuration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.31.1.7.1.2
hwAdslLineDownStreamBitAllocLowInfo when used to Adsl board This object contains the first 128 downstream sub-carrier bit allocations (sub-carrier # 1-128). This object is 64 bytes in length, where each byte contains 2 sub-carrier values. …	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.2011.6.31.1.7.1.3
hwAdslLineDownStreamBitAllocHighInfo when used to Adsl board This object contains the second 128 downstream sub-carrier bit allocations (sub-carrier # 129-256). This object is 64 bytes in length, where each byte contains 2 sub-carrier values. …	OctetString Constraints: range: 256-256	.1.3.6.1.4.1.2011.6.31.1.7.1.4
hwAdslLineUpStreamBitAllocInfo when used to Adsl board This Object contains 64 upstream sub-carrier bit allocations (sub-carrier # 1-64). This Object is 32 bytes in length, where each byte contains 2 sub-carrier values. Byte 1 - 3…	OctetString Constraints: range: 64-64	.1.3.6.1.4.1.2011.6.31.1.7.1.5

This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information.
Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports
The index of this table is ifIndex.

hwXdslPortCfgEntry row .1.3.6.1.4.1.2011.6.31.1.8.1

This table includes xDSL(e.g. adsl,g.shdsl,vdsl...)port information.
Used to support common attributes of the ADSL, G.SHDSL, and VDSL ports
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwXdslPortMaxMacLearnCfg Set Max MAC count on the xDSL port. Range: 0-255 Default: 255	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.31.1.8.1.1
hwXdslPortRateMonitorThresholdCfg Set Port monitoring rate threshold percent. Including upstream and downstream. Range: 0-100 Default: 0	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.31.1.8.1.2
hwXdslPortUpThresholdTxRateCfg Set Port monitoring upstream rate threshold value. Default: 0 Unit:bps	bpsSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.8.1.3
hwXdslPortDownThresholdTxRateCfg Set Port monitoring downstream rate threshold value. Default: 0 Unit:bps	bpsSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.8.1.4
hwXdslPortRateMonitorAlarmEnableCfg Enables or disables port rate monitor alarm. Options: 1. enabled(1) - Enables port rate monitor alarm 2. disabled(2) - Disables port rate monitor alarm	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.6.31.1.8.1.5
hwXdslPortUpTimeCfg Duration of the xDSL port activation Unit: second	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.8.1.6
hwXdslPortNTEPowerStatusCfg NTE power status, this object is defaulted off(2). Options: 1. on(1) - NTE power status is on 2. off(2) - NTE power status is off 3. unknown(3) - NTE power is in unknown status	Enumeration Enumerated Values: 1 on 2 off 3 unknown	.1.3.6.1.4.1.2011.6.31.1.8.1.7
hwXdslPortCurrentUpRateCfg Xdsl port current upstream value. Range: 0-30000 Default: 0	Integer32 Constraints: range: 0-30000	.1.3.6.1.4.1.2011.6.31.1.8.1.8
hwXdslPortCurrentDownRateCfg Xdsl port current downstream value. Range: 0-30000 Default: 0	Integer32 Constraints: range: 0-30000	.1.3.6.1.4.1.2011.6.31.1.8.1.9
hwXdslPortFarEndRunStateCfg Remote running status of the xDSL port. This object is defaulted unknown(1). Options: 1. unknown(1) - Unknown status 2. noModem(2) - Port is not connected to modem 3. handshake(3) - Handshake status 4. showtime(4) …	Enumeration Enumerated Values: 1 unknown 2 noModem 3 handshake 4 showtime	.1.3.6.1.4.1.2011.6.31.1.8.1.10
hwXdslPortPowerStateCfg Xdsl port power state. Options: 1. l0(1) - Full-on state 2. l2(2) - Low power state 3. l3(3) - Idle state 4. l1(4) - Low power state 5. invalidValue(-1) - Invalid state …	Enumeration Enumerated Values: -1 invalidValue 1 l0 2 l2 3 l3 4 l1	.1.3.6.1.4.1.2011.6.31.1.8.1.11
hwXdslPortUpCntCfg The up counts of xDSL port.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.8.1.12
hwXdslPortUpCntAdminStatusCfg Admin the up counts of xDSL port. Options: 1. reset(0) - Reset the up counts of xDSL port	Enumerationr/w Enumerated Values: 0 reset	.1.3.6.1.4.1.2011.6.31.1.8.1.13
hwXdslPortLastUpTimeCfg Last up time of a xDSL port.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.8.1.14
hwXdslPortLastDownTimeCfg Last down time of a xDSL port.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.8.1.15
hwXdslPortClearUpCntTimeCfg The time when up counts of a xDSL port is cleared.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.8.1.16
hwXdslPortRetrainCntCfg The retrain counts of xDSL Line.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.8.1.17
hwXdslPortLastRetrainReasonCfg The last retrain reson of xDSL Line, coded as bit mask. Only one bit can be set valid, all bits set valid means invalid retrain reason.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.8.1.18
hwXdslPortLoopFlagCfg Loop flag. Options: 1. false(0) - No loop 2. true (1) - Loop	Enumeration Enumerated Values: 0 false 1 true	.1.3.6.1.4.1.2011.6.31.1.8.1.19
hwXdslPortUpThresholdCfg Set Port monitoring upstream rate threshold percent value. Range: 0-100 Default: 0	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.31.1.8.1.20
hwXdslPortDownThresholdCfg Set Port monitoring downstream rate threshold percent value. Range: 0-100 Default: 0	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.31.1.8.1.21

This table provides one row for each ADSL PORT.
Each row contains the preactived parameters.
The index of this table is ifIndex.

hwAdslLinePreActParaInfoEntry row .1.3.6.1.4.1.2011.6.31.1.9.1

This table provides one row for each ADSL PORT.
Each row contains the preactived parameters.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwAdslAtucPrevSnrMgnInfo Noise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB	tenth dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.31.1.9.1.1
hwAdslAturPrevSnrMgnInfo Noise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB	tenth dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.31.1.9.1.2
hwAdslAtucPrevAttainableRateInfo Indicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.9.1.3
hwAdslAturPrevAttainableRateInfo Indicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps	bpsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.9.1.4
hwAdslAtucPreAtnInfo Measured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB	tenth dBSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.9.1.5
hwAdslAturPreAtnInfo Measured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB	tenth dBSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.9.1.6
hwAdslPreActiveTimeInfo The last time at that the port was activated.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.9.1.7

Adsl port three priority table.
The index of this table is ifIndex.

hwPortThreePriorityCfgEntry row .1.3.6.1.4.1.2011.6.31.1.10.1

Adsl port three priority table.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwPortThreePriorityEnableCfgobsolete Three Priority status of the interface. Options: 1. enable(1) - Adsl port three priority is enabled 2. disable(2) - Adsl port three priority is disabled	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.31.1.10.1.1

Max mac learning no limit table.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwSlotMacMaxNoLimitCfgEntry row .1.3.6.1.4.1.2011.6.31.1.11.1

Max mac learning no limit table.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwSlotMacMaxNoLimitEnableCfgobsolete This object is used to set whether all the ports in the slot limits the maximum number of learning MAC addresses. Options: 1. enable(1) - Don't limit the max NO. of learning mac addresses in the slot 2. disable(2) - L…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.31.1.11.1.1

XDSL port state staticstic table.
Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, G.SHDSL, and VDSL boards
The indexes of this table are ifType, hwFrameIndex, hwSlotIndex.

hwXdslPortStateStatisticInfoEntry row .1.3.6.1.4.1.2011.6.31.1.12.1

XDSL port state staticstic table.
Used to support the statistics information about the status mapping and status of ports on service boards, such as the ADSL, G.SHDSL, and VDSL boards
The indexes of this entry are ifTyp…

Indexes

RFC1213-MIBifType HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwXdslPortStatePortNumberInfo This object is port number of one slot.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.1
hwXdslPortStateBitmapListInfo The type of port status: 2 failed; 8 testing; 9 activated; 10 activating; 11 deactivated; 18 localloopback; 19 remoteloopback; 20 blocked; 37 utopialoopback; 38 afeloopback; 39 hybridloopback; 255 unknow…	OctetString	.1.3.6.1.4.1.2011.6.31.1.12.1.2
hwXdslTotalOfActivatedPortsInfo The total of the activated ports.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.3
hwXdslTotalOfDeactivatedPortsInfo The total of the deactivated ports.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.4
hwXdslTotalOfActivatingPortsInfo The total of the activating ports.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.5
hwXdslTotalOfTestingPortsInfo The total of the Testing ports.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.6
hwXdslTotalOfBlockedPortsInfo The total of the blocked ports.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.7
hwXdslTotalOfLocalLoopbackPortsInfo The total of the local testing ports.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.8
hwXdslTotalOfRemoteLoopbackPortsInfo The total of the remote testing ports.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.9
hwXdslTotalOfFailedPortsInfo The total of the failed ports.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.10
hwXdslTotalOfUnknownPortsInfo The total of the unknown xDSL ports.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.12.1.11

This table contains information on the ADSL extend line
configuration. One entry in this table reflects a
extend line profile defined by a manager which can be used to
configure the ADSL line.
The index of this table is hwadslLineExtConfProfileNameCfg.

hwadslLineExtConfProfileCfgEntry row .1.3.6.1.4.1.2011.6.31.1.13.1

This table contains information on the ADSL extend line
configuration. One entry in this table reflects a
extend line profile defined by a manager which can be used to
configure the ADSL line.
The index of this entry is…

Indexes

hwadslLineExtConfProfileNameCfg

Column	Syntax	OID
hwadslLineExtConfProfileNameCfg This object is used by the hwadslLineExtConfProfileTable in order to identify a row of this table. Indicates the name of the extended line profile.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.6.31.1.13.1.1
hwadslLineDisableToneSection1BeginCfg The begin index of the first section. Range: 0-511	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.2
hwadslLineDisableToneSection1EndCfg The end index of the first section. Range: 0-511	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.3
hwadslLineDisableToneSection1FlagCfg The enable flag of the first section. Options: 1. enabled(1) - The first tone section is enabled 2. disabled(2) - The first tone section is disabled	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.6.31.1.13.1.4
hwadslLineDisableToneSection2BeginCfg The begin index of the second section. Range: 0-511	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.5
hwadslLineDisableToneSection2EndCfg The end index of the second section. Range: 0-511	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.6
hwadslLineDisableToneSection2FlagCfg The enable flag of the second section. Options: 1. enabled(1) - The second tone section is enabled 2. disabled(2) - The second tone section is disabled	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.6.31.1.13.1.7
hwadslLineDisableToneSection3BeginCfg The begin index of the third section. Range: 0-511	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.8
hwadslLineDisableToneSection3EndCfg The end index of the third section. Range: 0-511	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.9
hwadslLineDisableToneSection3FlagCfg The enable flag of the third section. Options: 1. enabled(1) - The third tone section is enabled 2. disabled(2) - The third tone section is disabled	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.6.31.1.13.1.10
hwadslLineDisableToneSection4BeginCfg The begin index of the fourth section. Range: 0-511	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.11
hwadslLineDisableToneSection4EndCfg The end index of the fourth section. Range: 0-511	Integer32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.12
hwadslLineDisableToneSection4FlagCfg The enable flag of the fourth section. Options: 1. enabled(1) - The fourth tone section is enabled 2. disabled(2) - The fourth tone section is disabled	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.6.31.1.13.1.13
hwadsl2ChConfProfMinProtectionDsCfg If retransmission is not used in downstream direction,this parameter is minimum impulse noise protection on downstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The …	HUAWEI-ADSL-MIBHWADSLSYMBOLPROTECTIONr/w	.1.3.6.1.4.1.2011.6.31.1.13.1.14
hwadsl2ChConfProfMinProtectionUsCfg If retransmission is not used in upstream direction,this parameter is minimum impulse noise protection on upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The para…	HUAWEI-ADSL-MIBHWADSLSYMBOLPROTECTIONr/w	.1.3.6.1.4.1.2011.6.31.1.13.1.15
hwAdslExtDsMinTrainSnrMgnCfg Maximum Trainning Margin in downstream. Range: 0-310 Default: 30 Unit: tenth dB	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.31.1.13.1.16
hwAdslExtUsMinTrainSnrMgnCfg Maximum Trainning Margin in upstream. Range: 0-310 Default: 30 Unit: tenth dB	tenth dBInteger32r/w Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.31.1.13.1.17
hwAdslExtDsMaxPsdCfg Maximum PSD margin in downstream.	dBm/HzInteger32r/w Constraints: range: -60--30	.1.3.6.1.4.1.2011.6.31.1.13.1.18
hwadsl2TSSiPsdMaskDsCfg The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G992.5. Th…	ADSL2-LINE-TC-MIBAdsl2PsdMaskDsr/w Type Constraints: range: 0..96	.1.3.6.1.4.1.2011.6.31.1.13.1.19
hwadsl2TranMissionStardardMaskCfg The transmission stardard mask . The Mask bit and the corresponding Transmission Standard: 0x 1 1 1 1 1 1 ETSI T1.413 G992.5 G992.3 G992.2 G992.1 The Default BitMask: 0X0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.13.1.20
hwadsl2TransMissionAnnexMaskCfg The transMission annex Mask. The Mask bit and the corresponding Transmission Annex: 0x 1 1 1 1 1 Annex .J Annex .M Annex .L Annex .B Annex .A The Default BitMask: 0X0.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.13.1.21
hwadsl2TransMissionAnnexMScopeCfg Annex M expand scope: 1-Tone Index(7~32) 2-Tone Index(7~36) 3-Tone Index(7~40) 4-Tone Index(7~44) 5-Tone Index(7~48) 6-Tone Index(7~52) 7-Tone Index(7~56) 8-Tone Index(7~60) 9-Tone Index(7~64) -1-invalidValue	HUAWEI-ADSL-MIBHWADSL2ANNEXMSCOPEr/w	.1.3.6.1.4.1.2011.6.31.1.13.1.22
hwadsl2L2ModeStateCfg The state of L2 power management mode. Options: 1. disabled(1) - The L2 power management mode is disabled 2. enabled(2) - The L2 power management mode is enabled 3. forced(3) - The L2 power management mode is forced …	Enumerationr/w Enumerated Values: 1 disabled 2 enabled 3 forced	.1.3.6.1.4.1.2011.6.31.1.13.1.23
hwadsl2L2ModeMinDataRateCfg Minimum data rate in L2 mode. Range: 128-16384 Default: 256 Unit: Kbps	KbpsInteger32r/w Constraints: range: 128-16384	.1.3.6.1.4.1.2011.6.31.1.13.1.24
hwadsl2L2ModeMaxDataRateCfg Maximum data rate in L2 mode. Range: 128-16384 Default: 1024 Unit: Kbps	KbpsInteger32r/w Constraints: range: 128-16384	.1.3.6.1.4.1.2011.6.31.1.13.1.25
hwadsl2L2ModePayloadRateThresholdCfg Threshold for the Payload Rate Ratio. Range: 128-16384 Default: 128 Unit: Kbps	KbpsInteger32r/w Constraints: range: 128-16384	.1.3.6.1.4.1.2011.6.31.1.13.1.26
hwadsl2L2ModeGuardTimeCfg Guard time before entering L2 mode. Range: 0-1024 Default: 60 Unit: seconds	secondsInteger32r/w Constraints: range: 0-1024	.1.3.6.1.4.1.2011.6.31.1.13.1.27
hwadsl2L2ModeIntervalTimeCfg The minimum interval between two records of L2 mode. Range: 0-255 Default: 255 Unit: seconds	secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.31.1.13.1.28
hwadsl2L2ModeIntervalPowerValueCfg Maximum aggregate transmit power reduction per L2 request or L2 power trim. Range: 0-31 Default: 3 Unit: db	dbInteger32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.6.31.1.13.1.29
hwadsl2L2ModeTotalPowerValueCfg Total maximum aggregate transmit power reduction in L2. Range: 0-31 Default: 9 Unit: db	dbInteger32r/w Constraints: range: 0-31	.1.3.6.1.4.1.2011.6.31.1.13.1.30
hwadslExtUsPhyRcontrolCfg To enable or disable the PHY-R function on upstream direction. Options: 1. enable(1) - The PHY-R function on upstream direction is enabled 2. disable(2) - The PHY-R function on upstream direction is disabled Default: …	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.31.1.13.1.31
hwadslExtUsINPmaxCfg Maximum Impulse Noise Protection on upstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), sixSy…	DMT SymbolADSL2-LINE-TC-MIBAdsl2SymbolProtectionr/w Type Values: 1 noProtection 2 halfSymbol 3 singleSymbol 4 twoSymbols 5 threeSymbols 6 fourSymbols 7 fiveSymbols 8 sixSymbols 9 sevenSymbols 10 eightSymbols 11 nineSymbols 12 tenSymbols 13 elevenSymbols 14 twelveSymbols 15 thirteeSymbols 16 fourteenSymbols 17 fifteenSymbols 18 sixteenSymbols	.1.3.6.1.4.1.2011.6.31.1.13.1.32
hwadslExtUsMinRtxRatioCfg Minimum rtx ratio on upstream direction. Range: 0-255 Default: 0 Unit: 1/256	1/256Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.31.1.13.1.33
hwadslExtUsMinRSoverheadCfg The minimum value of R/N on upstream direction. Range: 0-128 Default: 0 Unit: 1/256	1/256Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.31.1.13.1.34
hwadslExtDsPhyRcontrolCfg To enable or disable the PHY-R function on downstream direction. Options: 1. enable(1) - The PHY-R function on downstream direction is enabled 2. disable(2) - The PHY-R function on downstream direction is disabled Def…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.31.1.13.1.35
hwadslExtDsINPmaxCfg Maximum Impulse Noise Protection on downstream direction. The parameter can take the following values: noProtection(1), halfSymbol(2), singleSymbol(3), twoSymbols(4), threeSymbols(5), fourSymbols(6), fiveSymbols(7), six…	DMT SymbolADSL2-LINE-TC-MIBAdsl2SymbolProtectionr/w Type Values: 1 noProtection 2 halfSymbol 3 singleSymbol 4 twoSymbols 5 threeSymbols 6 fourSymbols 7 fiveSymbols 8 sixSymbols 9 sevenSymbols 10 eightSymbols 11 nineSymbols 12 tenSymbols 13 elevenSymbols 14 twelveSymbols 15 thirteeSymbols 16 fourteenSymbols 17 fifteenSymbols 18 sixteenSymbols	.1.3.6.1.4.1.2011.6.31.1.13.1.36
hwadslExtDsMinRtxRatioCfg Minimum rtx ratio on downstream direction. Range: 0-255 Default: 0 Unit: 1/256	1/256Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.31.1.13.1.37
hwadslExtDsMinRSoverheadCfg The minimum value of R/N on downstream direction. Range: 0-128 Default: 0 Unit: 1/256	1/256Integer32r/w Constraints: range: 0-128	.1.3.6.1.4.1.2011.6.31.1.13.1.38
hwadsl2TSSiPsdMaskUsCfg The upstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G992.3 or G992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G992.5. This i…	ADSL2-LINE-TC-MIBAdsl2PsdMaskUsr/w Type Constraints: range: 0..12	.1.3.6.1.4.1.2011.6.31.1.13.1.39
hwadslLConfProfAdslModeCfg The ADSL2 management model specified includes an ADSL Mode attribute which identifies an instance of ADSL Mode-Specific PSD Configuration object in the ADSL Line Profile. The following classes of ADSL operating mode are…	Enumerationr/w Enumerated Values: -1 invalidValue 1 defMode 2 adsl 3 adsl2Pots 4 adsl2Isdn 5 adsl2PlusPots 6 adsl2PlusIsdn 7 adsl2ReachExtended	.1.3.6.1.4.1.2011.6.31.1.13.1.40
hwadslLineExtConfProfileRowStatusCfg This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to 'active'. When 'active' is set, the system will validate the profile. …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.31.1.13.1.41
hwadsl2L2ModeL2TimeCfg This minimum time (in seconds) between an entry into the L2 state and the first power trim in the L2 state and between two consecutive power trims in the L2 State. It ranges from 0 to 255 seconds. Range: 0-255 Default:…	secondsInteger32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.31.1.13.1.42
hwadslLineExtConfProfRtxModeDs The mode of operation of G.998.4 retransmission in downstream direction. Options: 1. forbidden(0) - G.998.4 retransmission not allowed. 2. preferred(1) - G.998.4 retr…	Enumerationr/w Enumerated Values: 0 forbidden 1 preferred 2 forced 3 testmode	.1.3.6.1.4.1.2011.6.31.1.13.1.43
hwadslLineExtConfProfLeftrThreshDs If retransmission is used in downstream direction, this parameter specifies the threshold for declaring a near-end leftr defect. The value is coded as a fraction of the NDR with valid range from 0.01 to 0.99 with incr…	0.01Unsigned32r/w Constraints: range: 0-99	.1.3.6.1.4.1.2011.6.31.1.13.1.44
hwadslLineExtConfProfMinEtrRtxDs If retransmission is used in downstream direction, this parameter specifies the minimum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.	bits/secondUnsigned32r/w Constraints: range: 32000-32000000	.1.3.6.1.4.1.2011.6.31.1.13.1.45
hwadslLineExtConfProfMaxEtrRtxDs If retransmission is used in downstream direction, this parameter specifies the maxmum expected throughput for the bearer channel.The values range in steps of 1000 bit/s.	bits/secondUnsigned32r/w Constraints: range: 32000-32000000	.1.3.6.1.4.1.2011.6.31.1.13.1.46
hwadslLineExtConfProfMaxNdrRtxDs If retransmission is used in downstream direction, this parameter specifies the maximum net data rate for the bearer channel. The values range in steps of 1000 bit/s.	bits/secondUnsigned32r/w Constraints: range: 32000-32000000	.1.3.6.1.4.1.2011.6.31.1.13.1.47
hwadslLineExtConfProfMaxDelayRtxDs If retransmission is used in downstream direction, this parameter specifies the maximum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges f…	millisecondsUnsigned32r/w Constraints: range: 1-63	.1.3.6.1.4.1.2011.6.31.1.13.1.48
hwadslLineExtConfProfMinDelayRtxDs If retransmission is used in downstream direction, this parameter specifies the minimum for the instantaneous delay due to the effect of retransmission only (see G.998.4 for detailed specification). The delay ranges f…	millisecondsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.31.1.13.1.49
hwadslLineExtConfProfMinInpShineRtxDs If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against SHINE for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of …	symbolsUnsigned32r/w Constraints: range: 0-63	.1.3.6.1.4.1.2011.6.31.1.13.1.50
hwadslLineExtConfProfShineRatioRtxDs If retransmission is used in downstream direction, this parameter specifies the SHINE ratio (detailed definition see G.998.4). The values range from 0 to 0.100 in increments of 0.001.	Unsigned32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.6.31.1.13.1.51
hwadslLineExtConfProfMinInpReinRtxDs If retransmission is used in downstream direction, this parameter specifies the minimum impulse noise protection against REIN for the bearer channel if it is transported over DMT symbols with a subcarrier spacing of 4…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.6.31.1.13.1.52
hwadslLineExtConfProfIatReinRtxDs If retransmission is used in downstream direction, this parameter specifies the inter-arrival time that shall be assumed for REIN protection. Options: 1. frequency100Hz(0) - an inter-arrival time derived from a REIN …	Enumerationr/w Enumerated Values: 0 frequency100Hz 1 frequency120Hz	.1.3.6.1.4.1.2011.6.31.1.13.1.53
hwadsl2LExtLineProfReferenceClock This object configures the clock reference for the ATU-C in an ADSL line. Represented as an enumeration. Options: 1. freeRun(1) - Indicates the local clock 2. system(2) - Indicates the system clock	Enumerationr/w Enumerated Values: 1 freeRun 2 system	.1.3.6.1.4.1.2011.6.31.1.13.1.54
hwadsl2LExtLineProfRfiBands The RFI notch parameter. It is a string consist of begin tone index, end tone index. This is a string of 4 groups of values in the following structure: Octets 0+1 - Index of start sub-carrier used in the context …	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.31.1.13.1.55
hwadsl2LExtLineProfDpboEPsd This parameter defines the PSD mask that is assumed to be permitted at the exchange. This parameter shall use the same format as PSDMASKds.The maximum number of breakpoints for DPBOEPSD is 16. This is a string of 16 p…	OctetStringr/w Constraints: range: 0-48	.1.3.6.1.4.1.2011.6.31.1.13.1.56
hwadsl2LExtLineProfDpboEsEL This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that hosts the xTU-C that is subject to spec…	0.5dBUnsigned32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.57
hwadsl2LExtLineProfDpboEselMin DPBOESELMIN in dB is the minimum of all main cable losses for the KVz supplied when using the SOL model (expansion of a KVz and ADSL2 provision of additional KVz areas from this KVz using cross-cables to additional KVz)…	0.5dBUnsigned32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.58
hwadsl2LExtLineProfDpboEsCableModelA This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESC…	Unsigned32r/w Constraints: range: 0-640	.1.3.6.1.4.1.2011.6.31.1.13.1.59
hwadsl2LExtLineProfDpboEsCableModelB This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESC…	Unsigned32r/w Constraints: range: 0-640	.1.3.6.1.4.1.2011.6.31.1.13.1.60
hwadsl2LExtLineProfDpboEsCableModelC This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that shall be used to describe the frequency dependent loss of E-side cables.Parameters DPBOESCMA, DPBOESC…	Unsigned32r/w Constraints: range: 0-640	.1.3.6.1.4.1.2011.6.31.1.13.1.61
hwadsl2LExtLineProfDpboMus DPBOMUS defines the assumed minimum usable receive signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. It shall be coded as an unsigned integer representing a PSD level…	0.5dBm/HzUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.31.1.13.1.62
hwadsl2LExtLineProfDpboFMin DPBOFMIN defines the minimum frequency from which the DPBO shall be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 0 kHz …	4.3125 KHzUnsigned32r/w Constraints: range: 0-511	.1.3.6.1.4.1.2011.6.31.1.13.1.63
hwadsl2LExtLineProfDpboFMax DPBOFMAX defines the maximum frequency at which DPBO may be applied. It shall be coded as a 16 bits unsigned integer representing a frequency in multiple of 4.3125 KHz. The range of valid values is from 138 kHz (coded …	4.3125 KHzUnsigned32r/w Constraints: range: 32-511	.1.3.6.1.4.1.2011.6.31.1.13.1.64
hwadsl2LExtLineProfMaxNomPsdUs Maximum PSD margin in upstream.	dBm/HzInteger32r/w Constraints: range: -60--30	.1.3.6.1.4.1.2011.6.31.1.13.1.65
hwadsl2LExtLineProfMaxNomAtpDs The maximum nominal aggregate transmit power in the downstream direction during initialization and showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).	0.1 dBmUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.31.1.13.1.66
hwadsl2LExtLineProfMaxNomAtpUs The maximum nominal aggregate transmit power in the upstream direction during initialization and showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).	0.1 dBmUnsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.6.31.1.13.1.67
hwadsl2LExtLineProfInmIatoDs The parameter of downstream impulse noise monitoring inter arrival time offset. This is the inter arrival time offset that the xTU receiver shall use to determine in which bin of the inter arrival time histogram the IA…	Unsigned32r/w Constraints: range: 3-511	.1.3.6.1.4.1.2011.6.31.1.13.1.68
hwadsl2LExtLineProfInmIatsDs The parameter of downstream impulse noise monitoring inter arrival time step. This is the inter arrival time step that the xTU receiver shall use to determine in which bin of the inter arrival time histogram the IAT is…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.6.31.1.13.1.69
hwadsl2LExtLineProfInmCcDs The parameter of downstream impulse noise monitoring cluster continuation value. This is the cluster continuation value that the xTU receiver shall use in the cluster indication process described in the relevant ITU-T …	Unsigned32r/w Constraints: range: 0-64	.1.3.6.1.4.1.2011.6.31.1.13.1.70
hwadsl2LExtLineProfInmInpeqModeDs The parameter of downstream impulse noise monitoring equivalent impulse noise protect mode. This is the INM Equivalent INP Mode that the xTU receiver shall use in the computation of the Equivalent INP, as defined in th…	Unsigned32r/w Constraints: range: 0-4	.1.3.6.1.4.1.2011.6.31.1.13.1.71
hwadsl2LExtLineProfForceInpDs The parameter indicates that the framer settings of the upstream bearer shall be selected such that the impulse noise protection computed according to the formula specified in the relevant recommendation is greater th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.6.31.1.13.1.72
hwadsl2LExtLineProfForceInpUs The parameter indicates that the framer settings of the upstream bearer shall be selected such that the impulse noise protection computed according to the formula specified in the relevant recommendation is greater th…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.6.31.1.13.1.73
hwadsl2LExtLineProfInitPolicy If retransmission is not used in a given transmit direction, this parameter indicates which policy shall be applied to determine the transceiver configuration parameters at initialization. The valid values for CIPOLICY…	Enumerationr/w Enumerated Values: 1 policy0 2 policy1 3 policy2	.1.3.6.1.4.1.2011.6.31.1.13.1.74
hwadsl2LExtLineProfL3Time This minimum time (in seconds) between an entry into the L3 state and the L0 or L2 state.	secondsUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.2011.6.31.1.13.1.75
hwadsl2LExtLineProfL3ModeState Power management state enabling. The state of L3 power management mode. Options: 1. enabled(1) - The L3 power management mode is enabled 2. disabled(2) - The L3 power management mode is disabled	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.6.31.1.13.1.76

This table provides one row for each ADSL port.
Each row contains the latest actived parameters.
The index of this table is ifIndex.

hwAdslLineLatestActParaInfoEntry row .1.3.6.1.4.1.2011.6.31.1.14.1

This table provides one row for each ADSL port.
Each row contains the latest actived parameters.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwAdslLineLatestActiveTimeInfo Actual time when latest actived.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.14.1.1
hwAdslLineLatestDeactiveTimeInfo Actual time when latest deactived. If port is actived, the value is invalid.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.14.1.2
hwAdslAtucLatestTxRateInfo Actual transmit rate on this channel when latest actived. Unit: bps	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.3
hwAdslAturLatestTxRateInfo Actual transmit rate on this channel when latest actived. Unit: bps	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.4
hwAdslAtucLatestSnrMgnInfo Noise Margin as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB.	tenth dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.31.1.14.1.5
hwAdslAturLatestSnrMgnInfo Noise Margin as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB.	tenth dBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.31.1.14.1.6
hwAdslAtucLatestAtnInfo Measured difference in the total power transmitted as seen by this ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB.	tenth dBSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.7
hwAdslAturLatestAtnInfo Measured difference in the total power transmitted as seen by this ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: tenth dB.	tenth dBSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.8
hwAdslAtucLatestAttainableRateInfo Indicates the maximum attainable data rate by the ATU-C at the time of the last adslAtucRateChangeTrap event. Unit: bps	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.9
hwAdslAturLatestAttainableRateInfo Indicates the maximum attainable data rate by the ATU-R at the time of the last adslAtucRateChangeTrap event. Unit: bps	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.10
hwAdslAtucLatestConfTxRateInfo Configured transmit rate for ADSL port. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Unit: bps.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.11
hwAdslAturLatestConfTxRateInfo Configured receive rate for ADSL port. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Unit: bps.	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.12
hwAdslAtucLatestInterleaveDelayInfo Interleave delay for this channel when latest actived. Unit: milliseconds	millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.13
hwAdslAturLatestInterleaveDelayInfo Interleave delay for this channel when latest actived. Unit: milliseconds	millisecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.14
hwAdslAtucLatestTargetSnrMgnInfo Port Signal/Noise Margin. Range: 0-310 Unit: tenth dB	tenth dBInteger32 Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.31.1.14.1.15
hwAdslAturLatestTargetSnrMgnInfo Port Signal/Noise Margin. Range: 0-310 Unit: tenth dB	tenth dBInteger32 Constraints: range: 0-310	.1.3.6.1.4.1.2011.6.31.1.14.1.16
hwAdslAtucLatestTxRateThresholdInfo Port down stream threshold. Unit: bps	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.17
hwAdslAturLatestTxRateThresholdInfo Port up stream threshold. Unit: bps	bpsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.14.1.18

XDSL port performance staticstic table.
The indexes of this table are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo.

hwXdslPortPerformanceStatInfoEntry row .1.3.6.1.4.1.2011.6.31.1.15.1

XDSL port performance staticstic table.
The indexes of this entry are ifIndex and hwXdslPort15minutesPerformanceIntervalInfo.

Indexes

IF-MIBifIndex hwXdslPort15minutesPerformanceIntervalInfo

Column	Syntax	OID
hwXdslPort15minutesPerformanceIntervalInfo The index of the interval which is queried. Range: 0-96	Integer32 Constraints: range: 0-96	.1.3.6.1.4.1.2011.6.31.1.15.1.1
hwXdslPort15minutesPerformanceInBytesInfo Read the receive bytes of xDSL port during 15 minutes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.15.1.2
hwXdslPort15minutesPerformanceOutBytesInfo Read the transmit bytes of xDSL port during 15 minutes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.15.1.3
hwXdslPortSyncSuccNumberInfo Number of successful activations of the ADSL/G.SHDSL port within 15 minutes	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.15.1.4
hwXdslPortSyncFailNumberInfo Number of failed activations of the ADSL/G.SHDSL port within 15 minutes	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.15.1.5
hwXdslPortAtucCodeViolationInfo Number of head errors of the ATUC cell within 15 minutes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.15.1.6
hwXdslPortAturCodeViolationInfo Number of head errors of the ATUR cell within 15 minutes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.15.1.7
hwXdslPortAtucFecSecondsInfo Seconds of the ATUC FEC errors within 15 minutes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.15.1.8
hwXdslPortAturFecSecondsInfo Seconds of the ATUR FEC errors within 15 minutes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.15.1.9
hwXdslPortCurrent15minutesStatTimeInfo Read the Stat. time of current 15 minutes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.15.1.10

This table provides the physical layer parameters of each ATUC.
The index of this table is ifIndex.

hwadslAtucPhysInfoEntry row .1.3.6.1.4.1.2011.6.31.1.16.1

This table provides the physical layer parameters of each ATUC.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwAdslAtucCurrTransModeInfo A set of ADSL line transmission modes.	HUAWEI-ADSL-MIBHWADSLTRANSMISSIONMODETYPE	.1.3.6.1.4.1.2011.6.31.1.16.1.1
hwAdslAtucCurrSignalAtnInfo Current signal attenuation of the ATU-C, indicating the difference between the transmit signal of the ATU-R and the receive signal of the ATU-C. Range: 0-630 Unit: tenth dB	tenth dBUnsigned32 Constraints: range: 0-630	.1.3.6.1.4.1.2011.6.31.1.16.1.2
hwadslAtucInvG994VendorId The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR message. It consists of 8 binary octets, including a country code followed by a (regionally allocated) provider code, as defined in Recommendation T.35.	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.2011.6.31.1.16.1.3
hwadslAtucLInvSelfTestResult The ATU self-test result, coded as a 32-bit value. The most significant octet of the result is '0' if the self-test passed, and '1' if the self-test failed. The interpretation of the other octets is vendor discretiona…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.16.1.4
hwadslAtucTransmissionCapabilitiesInfo The ATU transmission system capability list of the different coding types. It is coded in a bit-map representation with 1 or more bits set. A bit set to '1' means that the ATU supports the respective coding. The value m…	ADSL2-LINE-TC-MIBAdsl2TransmissionModeType Type Values: 0 ansit1413 1 etsi 2 g9921PotsNonOverlapped 3 g9921PotsOverlapped 4 g9921IsdnNonOverlapped 5 g9921isdnOverlapped 6 g9921tcmIsdnNonOverlapped 7 g9921tcmIsdnOverlapped 8 g9922potsNonOverlapped 9 g9922potsOverlapped 10 g9922tcmIsdnNonOverlapped 11 g9922tcmIsdnOverlapped 12 g9921tcmIsdnSymmetric 13 reserved1 14 reserved2 15 reserved3 16 reserved4 17 reserved5 18 g9923PotsNonOverlapped 19 g9923PotsOverlapped 20 g9923IsdnNonOverlapped 21 g9923isdnOverlapped 22 reserved6 23 reserved7 24 g9924potsNonOverlapped 25 g9924potsOverlapped 26 reserved8 27 reserved9 28 g9923AnnexIAllDigNonOverlapped 29 g9923AnnexIAllDigOverlapped 30 g9923AnnexJAllDigNonOverlapped 31 g9923AnnexJAllDigOverlapped 32 g9924AnnexIAllDigNonOverlapped 33 g9924AnnexIAllDigOverlapped 34 g9923AnnexLMode1NonOverlapped 35 g9923AnnexLMode2NonOverlapped 36 g9923AnnexLMode3Overlapped 37 g9923AnnexLMode4Overlapped 38 g9923AnnexMPotsNonOverlapped 39 g9923AnnexMPotsOverlapped 40 g9925PotsNonOverlapped 41 g9925PotsOverlapped 42 g9925IsdnNonOverlapped 43 g9925isdnOverlapped 44 reserved10 45 reserved11 46 g9925AnnexIAllDigNonOverlapped 47 g9925AnnexIAllDigOverlapped 48 g9925AnnexJAllDigNonOverlapped 49 g9925AnnexJAllDigOverlapped 50 g9925AnnexMPotsNonOverlapped 51 g9925AnnexMPotsOverlapped 52 reserved12 53 reserved13 54 reserved14 55 reserved15	.1.3.6.1.4.1.2011.6.31.1.16.1.5

This table is an extension of RFC 2662. It
contains ADSL line configuration and
monitoring information. This includes the ADSL
line's capabilities and actual ADSL transmission
system. An entry extends the adslLineEntry defined in
[RFC2662]. Each entry corresponds to an ADSL
line.
The index of this table is ifIndex.

hwadslLineExtInfoEntry row .1.3.6.1.4.1.2011.6.31.1.17.1

This table is an extension of RFC 2662. It
contains ADSL line configuration and
monitoring information. This includes the ADSL
line's capabilities and actual ADSL transmission
system. An entry extends the adslLineEntry …

Indexes

No indexes recorded

Column	Syntax	OID
hwadsl2LineTransAtucActualInfo The actual transmission mode of the ATU-C. During ADSL line initialization, the ADSL Transceiver Unit - Remote terminal end (ATU-R) will determine the mode used for the link. This value will be limited a single transmis…	ADSL2-LINE-TC-MIBAdsl2TransmissionModeType Type Values: 0 ansit1413 1 etsi 2 g9921PotsNonOverlapped 3 g9921PotsOverlapped 4 g9921IsdnNonOverlapped 5 g9921isdnOverlapped 6 g9921tcmIsdnNonOverlapped 7 g9921tcmIsdnOverlapped 8 g9922potsNonOverlapped 9 g9922potsOverlapped 10 g9922tcmIsdnNonOverlapped 11 g9922tcmIsdnOverlapped 12 g9921tcmIsdnSymmetric 13 reserved1 14 reserved2 15 reserved3 16 reserved4 17 reserved5 18 g9923PotsNonOverlapped 19 g9923PotsOverlapped 20 g9923IsdnNonOverlapped 21 g9923isdnOverlapped 22 reserved6 23 reserved7 24 g9924potsNonOverlapped 25 g9924potsOverlapped 26 reserved8 27 reserved9 28 g9923AnnexIAllDigNonOverlapped 29 g9923AnnexIAllDigOverlapped 30 g9923AnnexJAllDigNonOverlapped 31 g9923AnnexJAllDigOverlapped 32 g9924AnnexIAllDigNonOverlapped 33 g9924AnnexIAllDigOverlapped 34 g9923AnnexLMode1NonOverlapped 35 g9923AnnexLMode2NonOverlapped 36 g9923AnnexLMode3Overlapped 37 g9923AnnexLMode4Overlapped 38 g9923AnnexMPotsNonOverlapped 39 g9923AnnexMPotsOverlapped 40 g9925PotsNonOverlapped 41 g9925PotsOverlapped 42 g9925IsdnNonOverlapped 43 g9925isdnOverlapped 44 reserved10 45 reserved11 46 g9925AnnexIAllDigNonOverlapped 47 g9925AnnexIAllDigOverlapped 48 g9925AnnexJAllDigNonOverlapped 49 g9925AnnexJAllDigOverlapped 50 g9925AnnexMPotsNonOverlapped 51 g9925AnnexMPotsOverlapped 52 reserved12 53 reserved13 54 reserved14 55 reserved15	.1.3.6.1.4.1.2011.6.31.1.17.1.1
hwadslLineStatusRtxUsedDs This parameter specifies whether G.998.4 retransmission is used (i.e., active in Showtime) in a given transmit direction. The parameter in downstream is RTX_USED_ds, and the parameter in upstream is RTX_USED_us. In G…	Enumeration Enumerated Values: -1 invalidValue 1 rtxInuse 2 rtxUnusedModeForbidden 3 rtxUnusedNotSupportedXtuc 4 rtxUnusedNotSupportedXtur 5 rtxUnusedNotSupportedXtucAndXtur	.1.3.6.1.4.1.2011.6.31.1.17.1.2
hwadslLineStatusInitResult Indicates the result of the last full initialization performed on the line. Options: 1. noFail(0) - Successful initialization 2. configError(1) - Configuration failure 3. configNotFea…	Enumeration Enumerated Values: -1 invalidValue 0 noFail 1 configError 2 configNotFeasible 3 commFail 4 noPeerXtu 5 otherCause 6 ginpNotSelected	.1.3.6.1.4.1.2011.6.31.1.17.1.3
hwadslLineStatusSigAttenDs The measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 1…	0.1 dBUnsigned32 Constraints: range: 0-1270 range: 2147483646-2147483647	.1.3.6.1.4.1.2011.6.31.1.17.1.4
hwadslLineStatusSigAttenUs The measured difference in the total power transmitted by the ATU-R and the total power received by the ATU-C over all sub- carriers during Showtime. It ranges from 0 to 1270 units of 0.1 dB (physical values are 0 to 1…	0.1 dBUnsigned32 Constraints: range: 0-1270 range: 2147483646-2147483647	.1.3.6.1.4.1.2011.6.31.1.17.1.5
hwadslLineStatusActPsdDs Actual Power Spectrum Density (PSD) Downstream. The average downstream transmit PSD over the sub-carriers used for downstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of…	0.1 dBInteger32 Constraints: range: -900-0 range: 2147483647-2147483647	.1.3.6.1.4.1.2011.6.31.1.17.1.6
hwadslLineStatusActPsdUs Actual Power Spectrum Density (PSD) Upstream. The average upstream transmit PSD over the sub-carriers used for upstream. It ranges from -900 to 0 units of 0.1 dB (physical values are -90 to 0 dBm/Hz). A value of 0x7FFF…	0.1 dBInteger32 Constraints: range: -900-0 range: 2147483647-2147483647	.1.3.6.1.4.1.2011.6.31.1.17.1.7
hwadslLineStatusLastRetrainInfo Indicates the last retrained information performed on the line. Options: 1. none(1) - No record is available …	Enumeration Enumerated Values: 1 none 2 cpe-l3-trigger 3 lom-us-trigger-dra 4 lom-ds-trigger-dra 5 cpe-never-answer-oam 6 cpe-no-more-answer-oam 7 persistent-ncd-us 8 persistent-ncd-ds 9 persistent-lcd-us 10 persistent-lcd-ds 11 l2-problem-co-drop 12 l2-problem-cpe-drop 13 bitswap-refused-us-co-drop 14 bitswap-refused-us-cpe-drop 15 channel-change-us-co-drop 16 channel-change-us-cpe-drop 17 noise-increase-us-co-drop 18 noise-increase-us-cpe-drop 19 bitswap-refused-ds-co-drop 20 bitswap-refused-ds-cpe-drop 21 channel-change-ds-co-drop 22 channel-change-ds-cpe-drop 23 noise-increase-ds-co-drop 24 noise-increase-ds-cpe-drop 25 lom-us-co-drop 26 lom-us-cpe-drop 27 lom-ds-co-drop 28 lom-ds-cpe-drop 29 sra-problem-us-co-drop 30 sra-problem-us-cpe-drop 31 sra-failed-us-co-drop 32 sra-failed-us-cpe-drop 33 sra-problem-ds-co-drop 34 sra-problem-ds-cpe-drop 35 sra-rejected-ds-co-drop 36 sra-rejected-ds-cpe-drop 37 bitswap-problem-us-co-drop 38 bitswap-problem-us-cpe-drop 39 bitswap-failed-us-co-drop 40 bitswap-failed-us-cpe-drop 41 bitswap-problem-ds-co-drop 42 bitswap-problem-ds-cpe-drop 43 bitswap-rejected-ds-co-drop 44 bitswap-rejected-ds-cpe-drop 45 cpe-switched-off 46 cpe-lost 47 co-reset 48 co-stop 49 unknown	.1.3.6.1.4.1.2011.6.31.1.17.1.8
hwadslLineStatusLineRateDs The actual line rate downstream. Unit: bits/second	bits/secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.17.1.9
hwadslLineStatusLineRateUs The actual line rate upstream. Unit: bits/second	bits/secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.17.1.10

Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel.
The index of this table is ifIndex.

hwadslAtucChanPerfDataInfoEntry row .1.3.6.1.4.1.2011.6.31.1.18.1

Parameter table of the ATUC channel performance: This table is used to query the performance statistics of the ATUC channel.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwadslAtucChanFecBlksInfo The count of all blocks received with FEC anomalies since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.1
hwadslAtucChanHecBlksInfo The count of all blocks received with HEC anomalies since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.2
hwadslAtucChanCrcBlksInfo The count of all blocks received with CRC anomalies since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.3
hwadslAtucChanPerfCurr15MinFecBlksInfo The count of all blocks received with FEC anomalies on this channel within the current 15 minutes interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.4
hwadslAtucChanPerfCurr15MinHecBlksInfo The count of all blocks received with HEC anomalies on this channel within the current 15 minutes interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.5
hwadslAtucChanPerfCurr15MinCrcBlksInfo The count of all blocks received with CRC anomalies on this channel within the current 15 minutes interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.6
hwadslAtucChanPerfCurr1DayFecBlksInfo The count of all blocks received with FEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.7
hwadslAtucChanPerfCurr1DayHecBlksInfo The count of all blocks received with HEC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.8
hwadslAtucChanPerfCurr1DayCrcBlksInfo The count of all blocks received with CRC anomalies on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.9
hwadslAtucChanPerfPrev1DayFecBlksInfo The count of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.10
hwadslAtucChanPerfPrev1DayHecBlksInfo The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.11
hwadslAtucChanPerfPrev1DayCrcBlksInfo The count of all blocks received with CRC anomalies on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.12
hwadslAtucChanRtxCWInfo The count of units request retransmission since agent reset.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.13
hwadslAtucChanRtxCorrectedCWInfo The count of units corrected by retransmission since agent reset.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.14
hwadslAtucChanRtxUncorrectedCWInfo The count of units uncorrected by retransmission since agent reset.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.15
hwadslAtucChanPerfCurr15MinRtxCWInfo The count of units request retransmission on this channel within the current 15 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.16
hwadslAtucChanPerfCurr15MinRtxCorrectedCWInfo The count of units corrected by retransmission on this channel within the current 15 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.17
hwadslAtucChanPerfCurr15MinRtxUncorrectedCWInfo The count of units uncorrected by retransmission on this channel within the current 15 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.18
hwadslAtucChanPerfCurr1DayRtxCWInfo The count of units request retransmission on this channel during the current day.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.19
hwadslAtucChanPerfCurr1DayRtxCorrectedCWInfo The count of units corrected by retransmission on this channel during the current day.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.20
hwadslAtucChanPerfCurr1DayRtxUncorrectedCWInfo The count of units uncorrected by retransmission on this channel during the current day.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.21
hwadslAtucChanPerfPrev1DayRtxCWInfo The count of units request retransmission on this channel within the most recent previous 1-day period.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.22
hwadslAtucChanPerfPrev1DayRtxCorrectedCWInfo The count of units corrected by retransmission on this channel within the most recent previous 1-day period.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.23
hwadslAtucChanPerfPrev1DayRtxUncorrectedCWInfo The count of units uncorrected by retransmission on this channel within the most recent previous 1-day period.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.18.1.24
hwadslAtucChanCurr15MStartTime Start time of the current 15-minute performance statistics.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.18.1.25
hwadslAtucChanCurr1DayStartTime Start time of the current 1-day performance statistics.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.18.1.26

Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel.
The index of this table is ifIndex.

hwadslAturChanPerfDataInfoEntry row .1.3.6.1.4.1.2011.6.31.1.19.1

Parameter table of the ATUR channel performance: This table is used to query the performance statistics of the ATUR channel.
The index of this entry is ifIndex.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwadslAturChanFecBlksInfo The count of all blocks received with FEC anomalies since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.1
hwadslAturChanHecBlksInfo The count of all blocks received with HEC anomalies since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.2
hwadslAturChanCrcBlksInfo The count of all blocks received with CRC anomalies since agent reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.3
hwadslAturChanPerfCurr15MinFecBlksInfo The count of all blocks received with FEC anomalies on this channel within the current 15 minutes interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.4
hwadslAturChanPerfCurr15MinHecBlksInfo The count of all blocks received with HEC anomalies on this channel within the current 15 minutes interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.5
hwadslAturChanPerfCurr15MinCrcBlksInfo The count of all blocks received with CRC anomalies on this channel within the current 15 minutes interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.6
hwadslAturChanPerfCurr1DayFecBlksInfo The count of all blocks received with FEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.7
hwadslAturChanPerfCurr1DayHecBlksInfo The count of all blocks received with HEC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.8
hwadslAturChanPerfCurr1DayCrcBlksInfo The count of all blocks received with CRC anomalies on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.9
hwadslAturChanPerfPrev1DayFecBlksInfo The count of all blocks received with FEC anomalies on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.10
hwadslAturChanPerfPrev1DayHecBlksInfo The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.11
hwadslAturChanPerfPrev1DayCrcBlksInfo The count of all blocks received with HEC anomalies on this channel within the most recent previous 1-day period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.12
hwadslAturChanRtxCWInfo The count of units request retransmission since agent reset.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.13
hwadslAturChanRtxCorrectedCWInfo The count of units corrected by retransmission since agent reset.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.14
hwadslAturChanRtxUncorrectedCWInfo The count of units uncorrected by retransmission since agent reset.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.15
hwadslAturChanPerfCurr15MinRtxCWInfo The count of units request retransmission on this channel within the current 15 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.16
hwadslAturChanPerfCurr15MinRtxCorrectedCWInfo The count of units corrected by retransmission on this channel within the current 15 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.17
hwadslAturChanPerfCurr15MinRtxUncorrectedCWInfo The count of units uncorrected by retransmission on this channel within the current 15 minutes interval.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.18
hwadslAturChanPerfCurr1DayRtxCWInfo The count of units request retransmission on this channel during the current day.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.19
hwadslAturChanPerfCurr1DayRtxCorrectedCWInfo The count of units corrected by retransmission on this channel during the current day.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.20
hwadslAturChanPerfCurr1DayRtxUncorrectedCWInfo The count of units uncorrected by retransmission on this channel during the current day.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.21
hwadslAturChanPerfPrev1DayRtxCWInfo The count of units request retransmission on this channel within the most recent previous 1-day period.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.22
hwadslAturChanPerfPrev1DayRtxCorrectedCWInfo The count of units corrected by retransmission on this channel within the most recent previous 1-day period.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.23
hwadslAturChanPerfPrev1DayRtxUncorrectedCWInfo The count of units uncorrected by retransmission on this channel within the most recent previous 1-day period.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.31.1.19.1.24
hwadslAturChanCurr15MStartTime Start time of the current 15-minute performance statistics.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.19.1.25
hwadslAturChanCurr1DayStartTime Start time of the current 1-day performance statistics.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.6.31.1.19.1.26