1. Notification/alarm name: Rbs up 2. Notification/alarm generation cause: TCP connection 3. Restoration suggestion: Matching information of hwRbsDown.
hwUserNDRAPrefixAllocAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.10
This object indicates that the proportion of the IPv6 prefixes allocated in NDRA mode in the domain to the total number of IPv6 prefixes has reached the threshold.
hwAAASlaveTrafficUserAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.100
This object indicates that an alarm is generated user traffic is sent on the BAS interface of the backup device.
hwCUUserOnlineFailAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.101
rap name: User Login Failure.
2 Notice/Trap generation cause: The number of user login failures reached the number that can trigger detection and debugging.
3 Repair suggestions: Collect alarm, log, and configuration information, and contact Huawei technical support personnel.
hwUserNameIndexAllocAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.102
This object indicates that the usage of username index exceeds the threshold.
hwUserNameIndexAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.103
This object indicates that the alarm generated when the usage of username falls below the threshold is cleared.
hwCUUserNameIndexAllocAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.104
This object indicates that the usage of username index exceeds the threshold.
hwCUUserNameIndexAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.105
This object indicates that the alarm generated when the usage of username falls below the threshold is cleared.
hwNacUserClearAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.106
This object indicates that the nac users less than the resume threshold.
hwNacMaxUserAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.107
This object indicates that the nac users exceeds the threshold
hwAAALnsUserNumOverLimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.108
This object indicates that the number of LNS users on the device is over the limit
hwAAALnsUserNumOverLimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.109
This object indicates that the number of LNS users on the device fell bellow the the limit
hwUserDelegationPrefixAllocAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.11
This object indicates that the proportion of the IPv6 prefixes allocated in DHCPv6-PD mode in the domain to the total number of IPv6 prefixes has reached the threshold.
hwAAACUDomainNatStateAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.110
This object indicates that an alarm is generated when nat instances with and without a static source tracing algorithm enabled were bound to the domain.
hwAAACUDomainNatStateResume
.1.3.6.1.4.1.2011.5.2.2.2.0.111
This object indicates that a clear alarm is generated when nat instances without a static source tracing algorithm enabled were bound to the domain.
hwChangePasswordAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.112
This object indicates that local account password has been modified.
hwAdminDefaultPasswordAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.115
This object indicates that local account admin use default password.
hwPPPMaxUserAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.116
This object indicates that the PPP users exceeds the threshold
hwPPPMaxUserClearAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.117
This object indicates that the PPP users less than the resume threshold.
hwMacQuietMaxUserAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.118
ap name: The mac quiet user percentage has reached the mac quiet user alarm threshold.
2 Notice/Trap generation cause: The mac quiet user percentage has reached the mac quiet user alarm threshold.
3 Repair suggestions: NA.
hwMacQuietUserClearAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.119
ap name: The mac quiet user percentage has reached mac quiet user alarm clear threshold.
2 Notice/Trap generation cause: The mac quiet user percentage has reached mac quiet user alarm clear threshold.
3 Repair suggestions: NA.
hwUserIPAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.12
This object indicates that the IP address usage of the domain falls below the threshold.
hwQuietUserClearAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.120
rap name: The quiet max User alarm is cleared.
2 Notice/Trap generation cause: The quiet user percentage has fallen below the user alarm clear threshold.
3 Repair suggestions: NA.
hwQuietUserMaxAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.121
rap name: The number of quiet users is reaching the max.
2 Notice/Trap generation cause: The quiet user percentage has reached the upper threshold.
3 Repair suggestions: NA.
hwQuietPortClearAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.122
rap name: The quiet max user alarm on port is cleared.
2 Notice/Trap generation cause: The quiet user percentage on port has fallen below the user alarm clear threshold.
3 Repair suggestions: NA.
hwQuietPortMaxAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.123
rap name: The number of quiet users on port is reaching the max.
2 Notice/Trap generation cause: The quiet user percentage on port has reached the upper threshold.
3 Repair suggestions: NA.
hwMaxUclGroupIpNumAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.124
rap name: The dynamic ucl group configuration percentage has reached dynamic ucl group num alarm threshold.
2 Notice/Trap generation cause: The dynamic ucl group configuration percentage has reached dynamic ucl group num alarm threshold.
3 Repair suggestions: NA.
hwMaxUclGroupIpNumClearAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.125
rap name: The dynamic ucl group configuration percentage has fallen down the dynamic ucl group num alarm clear threshold.
2 Notice/Trap generation cause: The dynamic ucl group configuration percentage has fallen down the dynamic ucl group num alarm clear threshold.
3 Repair suggestions: NA.
hwIPGroupChannelUp
.1.3.6.1.4.1.2011.5.2.2.2.0.126
rap name: The state of ip group channel turns to up.
2 Notice/Trap generation cause: The state of ip group channel turns to up.
3 Repair suggestions: NA.
hwIPGroupChannelDown
.1.3.6.1.4.1.2011.5.2.2.2.0.127
rap name: The state of ip group channel turns to down.
2 Notice/Trap generation cause: The state of ip group channel turns to down.
3 Repair suggestions: NA.
hwHacaChannelUp
.1.3.6.1.4.1.2011.5.2.2.2.0.128
This object indicates that the HACA channel is Up.
hwHacaChannelDown
.1.3.6.1.4.1.2011.5.2.2.2.0.129
This object indicates that the HACA channel is Down.
hwUserIPv6AddressAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.13
This object indicates that the IPv6 address usage of the domain falls below the threshold.
hwCuUserNumThresholdAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.130
The number of users on a CU separation device reached the alarm threshold.
hwCuUserNumThresholdResume
.1.3.6.1.4.1.2011.5.2.2.2.0.131
The number of users on a CU separation device fell below the alarm threshold.
hwCUOnlineUserNumAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.132
The number of users in a UPMNG instance reached the alarm threshold.
hwCUOnlineUserNumResume
.1.3.6.1.4.1.2011.5.2.2.2.0.133
The number of users in a UPMNG instance fell below the alarm threshold.
hwAuthorDynAclRuleExceed
.1.3.6.1.4.1.2011.5.2.2.2.0.134
The number of dynamic ACL rules authorized to NAC users exceeds the upper limit.
hwAuthorAclRuleExceed
.1.3.6.1.4.1.2011.5.2.2.2.0.135
The number of ACL rules authorized to NAC users exceeds the upper limit.
hwDynmicUclGroupIpNumAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.136
Enable the alarm when the quantity of dynamic ucl group exceed the trap threshold.
hwDynmicUclGroupIpNumResume
.1.3.6.1.4.1.2011.5.2.2.2.0.137
Enable the alarm when the quantity of dynamic ucl group restore to the trap threshold.
hwUmDatabaseFileChangedAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.138
The user management database file is changed.
hwUserNDRAPrefixAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.14
This object indicates that the IPv6 NDRA prefix usage of the domain falls below the threshold.
hwUserDelegationPrefixAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.15
This object indicates that the IPv6 DHCPv6-PD prefix usage of the domain falls below the threshold.
hwOnlineUserNumUpperLimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.16
This object indicates the alarm generated when the number of users on the host exceeds the upper limit.
hwOnlineUserNumUpperLimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.17
This object indicates that the alarm generated when the number of users on the host exceeds the upper limit is cleared.
hwOnlineUserNumLowerLimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.18
This object indicates the alarm generated when the number of users on the host exceeds the lower limit.
hwOnlineUserNumLowerLimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.19
This object indicates that the alarm generated when the number of users on the host exceeds the lower limit is cleared.
hwUserSlotMaxNum
.1.3.6.1.4.1.2011.5.2.2.2.0.2
This object indicates the alarm threshold of the number of users who can go online from the board in a specified slot.
hwIPLowerlimitWarningAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.20
This object indicates the alarm generated when the number of IP addresses in the domain exceeds the lower limit.
hwIPLowerlimitWarningResume
.1.3.6.1.4.1.2011.5.2.2.2.0.21
This object indicates that the alarm generated when the number of IP addresses in the domain exceeds the lower limit is cleared.
hwIPv6AddressLowerlimitWarningAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.22
This object indicates the alarm generated when the number of IPv6 addresses in the domain exceeds the lower limit.
hwIPv6AddressLowerlimitWarningResume
.1.3.6.1.4.1.2011.5.2.2.2.0.23
This object indicates that the alarm generated when the number of IPv6 addresses in the domain exceeds the lower limit is cleared.
hwIPv6NDRAPrefixLowerlimitWarningAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.24
This object indicates the alarm generated when the number of IPv6 NDRA prefixes in the domain exceeds the lower limit.
hwIPv6NDRAPrefixLowerlimitWarningResume
.1.3.6.1.4.1.2011.5.2.2.2.0.25
This object indicates that the alarm generated when the number of IPv6 NDRA prefixes in the domain exceeds the lower limit is cleared.
hwIPv6PDPrefixLowerlimitWarningAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.26
This object indicates the alarm generated when the number of IPv6 PD prefixes in the domain exceeds the lower limit.
hwIPv6PDPrefixLowerlimitWarningResume
.1.3.6.1.4.1.2011.5.2.2.2.0.27
This object indicates that the alarm generated when the number of IPv6 PD prefixes in the domain exceeds the lower limit is cleared.
hwPolicyRouteSlotMaxNum
.1.3.6.1.4.1.2011.5.2.2.2.0.28
rap name: Policy route reach max value by slot
2 Notice/Trap generation cause: Policy route have reached the max value.
3 Repair suggestions: NA.
hwRemoteDownloadAclThresholdAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.29
rap name: The number of remote traffic classifier reached the threshold.
2 Notice/Trap generation cause: The number of remote traffic classifier reached the threshold.
3 Repair suggestions: NA.
hwOnlineUserNumAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.3
rap name: Reach the max online user
2 Notice/Trap generation cause: the online user number reach the limit
3 Repair suggestions:
upgrade your machine, or change to another board which can support more user
hwRemoteDownloadAclThresholdResume
.1.3.6.1.4.1.2011.5.2.2.2.0.30
rap name: The number of remote traffic classifier below the threshold.
2 Notice/Trap generation cause: The number of remote traffic classifier below the threshold.
3 Repair suggestions: NA.
hwAdminLoginFailed
.1.3.6.1.4.1.2011.5.2.2.2.0.31
ation/trap name: The administrator login failure frequently occurs.
2. Notification/trap generation cause: The number of login failures of the administrator is close to the threshold.
3. Restoration suggestion: Use a valid account to login to the device to enhance system security.
hwAdminLoginFailedClear
.1.3.6.1.4.1.2011.5.2.2.2.0.32
ation/trap name: The administrator login failure occurs not frequently.
2. Notification/trap generation cause: The number of login failures of the administrator is less than the threshold.
3. Restoration suggestion: N/A
hwUserGroupThresholdAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.33
rap name: The number of user groups reached the threshold.
2 Notice/Trap generation cause: The number of user groups reached the threshold.
3 Repair suggestions: NA.
hwUserGroupThresholdResume
.1.3.6.1.4.1.2011.5.2.2.2.0.34
rap name: The number of user groups fell below 90% of a specified alarm threshold.
2 Notice/Trap generation cause: The number of user groups fell below 90% of a specified alarm threshold.
3 Repair suggestions: NA.
hwEDSGLicenseExpireAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.35
This object indicates the alarm about EDSG license exhaustion.
hwEDSGLicenseExpireResume
.1.3.6.1.4.1.2011.5.2.2.2.0.36
This object indicates that the alarm about EDSG license exhaustion is cleared.
hwAAAAccessUserResourceOrCpuAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.37
This object indicates that an alarm is generated when the user resource or CPU usage on a board exceeds the alarm threshold.
hwAAAAccessUserResourceOrCpuResume
.1.3.6.1.4.1.2011.5.2.2.2.0.38
This object indicates that a clear alarm is generated when the user resource or CPU usage on a board falls below the clear alarm threshold.
hwAAASessionGroupUpperLimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.39
rap name: Reach Session-group Upper Limit
2 Notice/Trap generation cause: The number of session-group users reached the upper limit of the device.
3 Repair suggestions: Check your machine.
hwSetUserQosProfileFail
.1.3.6.1.4.1.2011.5.2.2.2.0.4
rap name: Set User's QOS Profile Fail
2 Notice/Trap generation cause: Set User's QOS Profile Fail
3 Repair suggestions:
Check The Valid of Profile Name or User
hwAAASessionGroupUpperLimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.40
rap name: Session-group Upper Limit Recovery
2 Notice/Trap generation cause: The number of session-group users fell below the upper limit of the device.
3 Repair suggestions: NA
hwAAASessionGroupLowerLimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.41
rap name: Fell Below Session-group Lower Limit
2 Notice/Trap generation cause: The number of session-group users fell below the lower limit of the device .
3 Repair suggestions:
Check your machine.
hwAAASessionGroupLowerLimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.42
rap name: Session-group Lower Limit Recovery
2 Notice/Trap generation cause: The number of session-group users on the device reached the lower limit of the device.
3 Repair suggestions: NA
hwAAAOnlineSessoinUpperLimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.43
rap name: Reach Online Sessions Upper Limit
2 Notice/Trap generation cause: The number of session reached the upper limit of the device.
3 Repair suggestions: Check your machine.
hwAAAOnlineSessoinUpperLimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.44
rap name: Online Sessions Upper Limit Recovery
2 Notice/Trap generation cause: The number of sessions fell below the upper limit of the device..
3 Repair suggestions: NA
hwAAAOnlineSessoinLowerLimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.45
rap name: Fell Below Online Sessions Lower Limit
2 Notice/Trap generation cause: The number of sessions fell below the lower limit of the device.
3 Repair suggestions: Check your machine.
hwAAAOnlineSessoinLowerLimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.46
rap name: Online Sessions Lower Limit Recovery
2 Notice/Trap generation cause: The number of sessions reached the lower limit of the device.
3 Repair suggestions: NA
hwAAASlotOnlineUserNumAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.47
rap name: Reach Slot Online Users Upper Limit
2 Notice/Trap generation cause: The number of users reached the upper limit of the board.
3 Repair suggestions: Please change to another board which can support more sessions.
hwAAASlotOnlineUserNumResume
.1.3.6.1.4.1.2011.5.2.2.2.0.48
rap name: Slot Online Users Upper Limit Recovery
2 Notice/Trap generation cause: The number of users fell below the upper limit of the board.
3 Repair suggestions: NA
hwAAATimerExpireMajorLevelAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.49
rap name: The resource occupied by real-time accounting services reached the major alarm threshold.
2 Notice/Trap generation cause: The resource occupied by real-time accounting services reached the major alarm threshold.
3 Repair suggestions: NA.
hwUserMaxNum
.1.3.6.1.4.1.2011.5.2.2.2.0.5
This object indicates the alarm threshold of the number of users who can go online from a specified device.
hwAAATimerExpireMajorLevelResume
.1.3.6.1.4.1.2011.5.2.2.2.0.50
rap name: The resource occupied by real-time accounting services reached the major alarm clear threshold.
2 Notice/Trap generation cause: The resource occupied by real-time accounting services reached the major alarm clear threshold.
3 Repair suggestions: NA.
hwAAATimerExpireCriticalLevelAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.51
rap name: The resource occupied by real-time accounting services reached the critical alarm threshold.
2 Notice/Trap generation cause: The resource occupied by real-time accounting services reached the critical alarm threshold.
3 Repair suggestions: NA.
hwAAATimerExpireCriticalLevelResume
.1.3.6.1.4.1.2011.5.2.2.2.0.52
rap name: The resource occupied by real-time accounting services reached the critical alarm clear threshold.
2 Notice/Trap generation cause: The resource occupied by real-time accounting services reached the critical alarm clear threshold.
3 Repair suggestions: NA.
hwMacMovedQuietMaxUserAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.53
ap name: The mac moved quiet user percentage has reached the mac move quiet user alarm threshold.
2 Notice/Trap generation cause: The mac moved quiet user percentage has reached the mac move quiet user alarm threshold.
3 Repair suggestions: NA.
hwMacMovedQuietUserClearAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.54
ap name: The mac moved quiet user percentage has reached mac moved quiet user alarm clear threshold.
2 Notice/Trap generation cause: The mac moved quiet user percentage has reached mac moved quiet user alarm clear threshold.
3 Repair suggestions: NA.
hwAAAChasisIPv6AddressThresholdAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.55
rap name: The number of IPv6 addresses reached the upper limit of the device.
2 Notice/Trap generation cause: The number of IPv6 addresses reached the upper limit of the device.
3 Repair suggestions: NA.
hwAAAChasisIPv6AddressThresholdResume
.1.3.6.1.4.1.2011.5.2.2.2.0.56
rap name: The number of IPv6 addresses fell below the lower limit of the device.
2 Notice/Trap generation cause: The number of IPv6 addresses fell below the lower limit of the device.
3 Repair suggestions: NA.
hwAAASlotIPv6AddressThresholdAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.57
rap name: The number of IPv6 addresses on the slot reached the upper limit of the device.
2 Notice/Trap generation cause: The number of IPv6 addresses on the slot reached the upper limit of the device.
3 Repair suggestions: NA.
hwAAASlotIPv6AddressThresholdResume
.1.3.6.1.4.1.2011.5.2.2.2.0.58
rap name: The number of IPv6 addresses on the slot fell below the lower limit of the device.
2 Notice/Trap generation cause: The number of IPv6 addresses on the slot fell below the lower limit of the device.
3 Repair suggestions: NA.
hwAAAAdminUserAuthenWithoutDomainName
.1.3.6.1.4.1.2011.5.2.2.2.0.59
rap name: Performing remote authentication on administrators whose user names do not contain domain names brings security risks.
2 Notice/Trap generation cause: Performing remote authentication on administrators whose user names do not contain domain names brings security risks.
3 Repair suggestions: Configuring the device in the admin domain to send user names with domain names to the remote authen server.
hwRbpStateChange
.1.3.6.1.4.1.2011.5.2.2.2.0.6
rap name: Rbp state changed
2 Notice/Trap generation cause: Rbp state changed
3 Repair suggestions:
If the change is unexpected, please check the links between master and backup devices according to the change reason.
hwUserMaxNumResume
.1.3.6.1.4.1.2011.5.2.2.2.0.60
This object indicates the clear alarm when the number of users on the board or host falls below the threshold.
hwUserSlotMaxNumResume
.1.3.6.1.4.1.2011.5.2.2.2.0.61
This object indicates the clear alarm when the number of users on the board falls below the threshold.
hwUserOnlineFailAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.62
rap name: User Login Failure.
2 Notice/Trap generation cause: The number of user login failures reached the number that can trigger detection and debugging.
3 Repair suggestions: Collect alarm, log, and configuration information, and contact Huawei technical support personnel.
hwCUUserMaxNum
.1.3.6.1.4.1.2011.5.2.2.2.0.63
The number of users on the board/device reached the threshold.
hwCUUserMaxNumResume
.1.3.6.1.4.1.2011.5.2.2.2.0.64
The number of users on the board/device fell below the threshold.
hwCUUserSlotMaxNum
.1.3.6.1.4.1.2011.5.2.2.2.0.65
The number of users on the board reached the alarm threshold.
hwCUUserSlotMaxNumResume
.1.3.6.1.4.1.2011.5.2.2.2.0.66
The number of users on the board fell below the threshold.
hwCUAAAAccessUserResourceOrCpuAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.67
This object indicates that an alarm is generated when the user resource or CPU usage on a board exceeds the alarm threshold.
hwCUAAAAccessUserResourceOrCpuResume
.1.3.6.1.4.1.2011.5.2.2.2.0.68
This object indicates that a clear alarm is generated when the user resource or CPU usage on a board falls below the clear alarm threshold.
hwCUAAASlotIPv6AddressThresholdAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.69
This object indicates that an alarm is generated when a large number of users went online, and the number of IPv6 addresses used on the board reached the configured upper threshold.
hwRbsDown
.1.3.6.1.4.1.2011.5.2.2.2.0.7
ation/alarm name: Rbs down
2. Notification/alarm generation cause: TCP shutdown due to pucHwRbsDownReason
3. Restoration suggestion: Check the link according to the cause.
hwCUAAASlotIPv6AddressThresholdResume
.1.3.6.1.4.1.2011.5.2.2.2.0.70
This object indicates that a clear alarm is generated when the number of IPv6 addresses used for online users on the device fell below the lower threshold.
hwAAAOnlineSessoinUpperLimitCpAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.71
This object indicates that the alarm generated when the number of session reached the upper limit of the device.
hwAAAOnlineSessoinUpperLimitCpResume
.1.3.6.1.4.1.2011.5.2.2.2.0.72
This object indicates that the alarm generated when the number of sessions fell below the upper limit of the device.
hwAAAOnlineSessoinLowerLimitCpAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.73
This object indicates that the alarm generated when the number of sessions fell below the lower limit of the device.
hwAAAOnlineSessoinLowerLimitCpResume
.1.3.6.1.4.1.2011.5.2.2.2.0.74
This object indicates that the alarm generated when the number of sessions reached the lower limit of the device.
hwOnlineUserNumLowerLimitCpAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.75
This object indicates that the alarm generated when the number of users on the host exceeds the lower limit.
hwOnlineUserNumLowerLimitCpResume
.1.3.6.1.4.1.2011.5.2.2.2.0.76
This object indicates that the alarm generated when the number of users on the host exceeds the lower limit is cleared.
hwOnlineUserNumUpperLimitCpAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.77
This object indicates that the alarm generated when the number of users on the host exceeds the upper limit.
hwOnlineUserNumUpperLimitCpResume
.1.3.6.1.4.1.2011.5.2.2.2.0.78
This object indicates that the alarm generated when the number of users on the host exceeds the upper limit is cleared.
hwRemoteDownloadAclThresholdCpAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.79
This object indicates that the alarm generated when the number of remote traffic classifier reached the threshold.
hwRbsUp
.1.3.6.1.4.1.2011.5.2.2.2.0.8
ation/alarm name: Rbs up
2. Notification/alarm generation cause: TCP connection
3. Restoration suggestion: Matching information of hwRbsDown
hwRemoteDownloadAclThresholdCpResume
.1.3.6.1.4.1.2011.5.2.2.2.0.80
This object indicates that the alarm generated when the number of remote traffic classifier below the threshold.
hwAAANoBackupInterfaceAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.81
This object indicates that an alarm is generated to prompt a customer to configure backup protection on an interface when the number of users with no backup protection configured on the interface reaches the threshold.
hwCUIPv6AddressLowerlimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.83
This object indicates the alarm generated when the number of IPv6 addresses in the domain exceeds the lower limit.
hwCUIPv6AddressLowerlimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.84
This object indicates that the alarm generated when the number of IPv6 addresses in the domain exceeds the lower limit is cleared.
hwCUIPv6NDRAPrefixLowerlimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.85
This object indicates the alarm generated when the number of IPv6 NDRA prefixes in the domain exceeds the lower limit.
hwCUIPv6NDRAPrefixLowerlimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.86
This object indicates that the alarm generated when the number of IPv6 NDRA prefixes in the domain exceeds the lower limit is cleared.
hwCUIPv6PDPrefixLowerlimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.87
This object indicates the alarm generated when the number of IPv6 PD prefixes in the domain exceeds the lower limit.
hwCUIPv6PDPrefixLowerlimitResume
.1.3.6.1.4.1.2011.5.2.2.2.0.88
This object indicates that the alarm generated when the number of IPv6 PD prefixes in the domain exceeds the lower limit is cleared.
hwCUUserDelegationPrefixAllocAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.89
This object indicates that the proportion of the IPv6 prefixes allocated in DHCPv6-PD mode in the domain to the total number of IPv6 prefixes has reached the threshold.
hwUserIPv6AddressAllocAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.9
This object indicates that the proportion of the IPv6 addresses allocated in the domain to the total number of IPv6 addresses has reached the threshold.
hwCUUserDelegationPrefixAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.90
This object indicates that the IPv6 DHCPv6-PD prefix usage of the domain falls below the threshold.
hwCUUserIPAllocAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.91
This object indicates that the IP address usage of the domain has reached the threshold.
hwCUUserIPAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.92
This object indicates that the IP address usage of the domain falls below the threshold.
hwCUUserIPv6AddressAllocAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.93
This object indicates that the proportion of the IPv6 addresses allocated in the domain to the total number of IPv6 addresses has reached the threshold.
hwCUUserIPv6AddressAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.94
This object indicates that the IPv6 address usage of the domain falls below the threshold.
hwCUUserNDRAPrefixAllocAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.95
This object indicates that the proportion of the IPv6 prefixes allocated in NDRA mode in the domain to the total number of IPv6 prefixes has reached the threshold.
hwCUUserNDRAPrefixAllocAlarmResume
.1.3.6.1.4.1.2011.5.2.2.2.0.96
This object indicates that the IPv6 NDRA prefix usage of the domain falls below the threshold.
hwCUIPLowerlimitAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.97
This object indicates the alarm generated when the number of IP addresses in the domain exceeds the lower limit.
hwCUIPLowerlimitWarningResume
.1.3.6.1.4.1.2011.5.2.2.2.0.98
This object indicates that the alarm generated when the number of IP addresses in the domain exceeds the lower limit is cleared.
hwIpStaticUserMixedInsertAlarm
.1.3.6.1.4.1.2011.5.2.2.2.0.99
This object indicates that an alarm is generated The Eth-Trunk of IP static user contains member ports on different types of cards.
hwHarddiskoverflow
.1.3.6.1.4.1.2011.5.2.2.3.0.1
rap name: Reach IP address Allocable Threshold
2 Notice/Trap generation cause: reach the threshold set at domain
3 Repair suggestions:
Check whether to renew configuring the BAS IP pool
Add new IP pool to this domain .
hwHarddiskReachThreshold
.1.3.6.1.4.1.2011.5.2.2.3.0.2
rap name: Reach IP address Allocable Threshold
2 Notice/Trap generation cause: reach the threshold set at domain
3 Repair suggestions:
Check whether to renew configuring the BAS IP pool
Add new IP pool to this domain .
hwHarddiskOK
.1.3.6.1.4.1.2011.5.2.2.3.0.3
rap name: Reach IP address Allocable Threshold
2 Notice/Trap generation cause: reach the threshold set at domain
3 Repair suggestions:
Check whether to renew configuring the BAS IP pool
Add new IP pool to this domain .
hwCachetoFTPFail
.1.3.6.1.4.1.2011.5.2.2.3.0.4
rap name: Reach IP address Allocable Threshold
2 Notice/Trap generation cause: reach the threshold set at domain
3 Repair suggestions:
Check whether to renew configuring the BAS IP pool
Add new IP pool to this domain .
hwHDtoFTPFail
.1.3.6.1.4.1.2011.5.2.2.3.0.5
rap name: Reach IP address Allocable Threshold
2 Notice/Trap generation cause: reach the threshold set at domain
3 Repair suggestions:
Check whether to renew configuring the BAS IP pool
Add new IP pool to this domain .
hwAAAUserPwdWillExpire
.1.3.6.1.4.1.2011.5.2.2.3.0.6
rap name: Local user password will expire
2 Notice/Trap generation cause: Local user doesnot change password
3 Repair suggestions:
NA
hwAAAUserPwdExpired
.1.3.6.1.4.1.2011.5.2.2.3.0.7
rap name: Local user password had expired
2 Notice/Trap generation cause: Local user doesnot change password always
3 Repair suggestions:
NA
hwAaa 
hwAuthenSchemeTable 
hwAuthenSchemeEntry 
hwAuthenSchemeName 
hwRoamChar 
hwUserIPAllocAlarm