Server temperature monitor cannot read temperature data.
hpnsaTempTrapWarning
.1.3.6.1.4.1.11.2.23.0.12289
Server temperature has exceeded the warning temperature
threshold.
hpnsaTempTrapEmergency
.1.3.6.1.4.1.11.2.23.0.12290
Server temperature has exceeded the emergency temperature
threshold.
hpnsaNicReceiveErrors
.1.3.6.1.4.1.11.2.23.0.16385
The total number of packets with receive errors has
exceeded the threshold.
hpnsaNicTransmitErrors
.1.3.6.1.4.1.11.2.23.0.16386
The total number of packets with transmit errors has
exceeded the threshold.
hpnsaNicAdapterReset
.1.3.6.1.4.1.11.2.23.0.16387
The total number of LAN Adapter reset errors has
exceeded the threshold.
hpnsaNicAlignmentErrors
.1.3.6.1.4.1.11.2.23.0.16388
The total number of alignment and CRC errors has
exceeded the threshold.
hpnsaNicGiantFrameErrors
.1.3.6.1.4.1.11.2.23.0.16389
The total number of giant frame packets has exceeded
the threshold.
hpnsaNicHardwareMismatch
.1.3.6.1.4.1.11.2.23.0.16390
The total number of packets with length less than the
required minimum length has exceeded the threshold.
hpnsaNicLateCollision
.1.3.6.1.4.1.11.2.23.0.16391
The total number of late collision errors has exceeded
the threshold (the network is too large).
hpnsaNicExcessiveCollision
.1.3.6.1.4.1.11.2.23.0.16392
The total number of colliding packets has exceeded
the threshold (the network is too busy).
hpnsaNicCarrierSenseError
.1.3.6.1.4.1.11.2.23.0.16393
The total number of carrier sense errors has exceeded
the threshold.
hpnsaNicDeferralError
.1.3.6.1.4.1.11.2.23.0.16394
The total number of adapter deferrals has exceeded the
threshold (the network is forever busy).
hpnsaNicNoECBError
.1.3.6.1.4.1.11.2.23.0.16395
The total number of No ECB errors (LAN adapter is out of
receive buffers) errors has exceeded the threshold.
hpnsaNicReceiveOverflow
.1.3.6.1.4.1.11.2.23.0.16396
The total number of Receive Overflow errors has exceeded the
threshold.
hpnsaNicUtilCount
.1.3.6.1.4.1.11.2.23.0.16397
LAN adapter utilization count has exceeded the threshold.
hpnsaNicAdapterMismatch
.1.3.6.1.4.1.11.2.23.0.16398
The LAN adapter which the alarms were configured for,
has been replaced by another type of LAN adapter.
hpnsaNicTxFIFOUnderrun
.1.3.6.1.4.1.11.2.23.0.16399
There possibly is a dataflow problem with your HP LAN adapter.
hpnsaNicTxTimeOut
.1.3.6.1.4.1.11.2.23.0.16400
The HP LAN adapter driver did not receive a transmit complete
interrupt.
hpnsaNicRxFIFOOverrun
.1.3.6.1.4.1.11.2.23.0.16401
There possibly is a dataflow problem with your HP LAN adapter.
hpnsaNicRxFalseInterrupts
.1.3.6.1.4.1.11.2.23.0.16402
There is a dataflow problem with your HP LAN adapter - receive
interrupts are being generated, but no receive packets are being
present.
hpnsaNicPagingError
.1.3.6.1.4.1.11.2.23.0.16403
There possibly is a problem with your HP LAN adapter -
it generates too many buffer pointer errors.
hpnsaNicTimedOutDMA
.1.3.6.1.4.1.11.2.23.0.16404
There possibly is a problem with your HP LAN adapter -
DMA timed out while transmitting or receiving a packet.
hpnsaNicTxNoResources
.1.3.6.1.4.1.11.2.23.0.16405
The HP LAN adapter is transmitting faster than the media
can handle.
hpnsaNicTxExcessiveFrags
.1.3.6.1.4.1.11.2.23.0.16406
The number of buffer fragments has exceeded the maximum
number allowed by the network protocol in your HP LAN
adapter.
hpnsaNicRxLow
.1.3.6.1.4.1.11.2.23.0.16407
The total number of errors due to requests of an ECB being
denied has exceeded the threshold.
hpnsaNicRxEmpty
.1.3.6.1.4.1.11.2.23.0.16408
There possibly is a problem with your HP LAN adapter running
in bus master mode.
hpnsaParityError
.1.3.6.1.4.1.11.2.23.0.20528
Parity error has been detected in parity memory
hpnsaBusTimeoutError
.1.3.6.1.4.1.11.2.23.0.20544
One of the bus masters caused a bus timeout
hpnsaIOChannelCheck
.1.3.6.1.4.1.11.2.23.0.20560
I/0 channel check activated by device in EISA slot caused an error
hpnsaSoftwareNMI
.1.3.6.1.4.1.11.2.23.0.20576
Software NMI has been generated
hpnsaPostMemoryResize
.1.3.6.1.4.1.11.2.23.0.20592
Memory size has been adjusted during the Power-On-Self-Test
during the last boot
hpnsaPciParityError
.1.3.6.1.4.1.11.2.23.0.20624
Parity error has occurred on a transfer to/from a device on one
of the PCI buses
hpnsaPciSystemError
.1.3.6.1.4.1.11.2.23.0.20640
System error has occurred in the PCI subsystem
hpnsaCPUFailure
.1.3.6.1.4.1.11.2.23.0.20656
One or more CPUs have failed. Detected by BIOS during POST
hpnsaFailsafeTimeout
.1.3.6.1.4.1.11.2.23.0.20672
Timeout of failsafe timer has occurred
hpnsaErrorLoggingDisabled
.1.3.6.1.4.1.11.2.23.0.20704
Error logging for a specific error has been disabled due to too many
errors of that kind in a short time period
hpnsaSystemWarning
.1.3.6.1.4.1.11.2.23.0.20736
An event of warning severity has occurred in the system. For
example, chassis door has been opened
hpnsaSystemCritical
.1.3.6.1.4.1.11.2.23.0.20737
An event of critical severity has occurred in the system. For
example, both system fans have failed
hpnsaVoltEmergency
.1.3.6.1.4.1.11.2.23.0.20738
Fatal voltage threshold on one of the system voltage channels has
been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI,
+3.3V to CPU
hpnsaVoltWarning
.1.3.6.1.4.1.11.2.23.0.20739
Warning voltage threshold on one of the system voltage channels has
been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI,
+3.3V to CPU
hpnsaASRServerRestart
.1.3.6.1.4.1.11.2.23.0.20752
Server has been restarted after the system watchdog timer has timed
out due to NOS being hung
hpnsaSystemReconfig
.1.3.6.1.4.1.11.2.23.0.20800
EISA Configuration Utility has altered system configuration
hpnsaHotSwapTempMonitorError
.1.3.6.1.4.1.11.2.23.0.24449
Hot Swap Cage: Temperature monitor error occurred
hpnsaHotSwapTempWarning
.1.3.6.1.4.1.11.2.23.0.24451
Hot Swap Cage: Warning temperature exceeded
hpnsaHotSwapTempEmergency
.1.3.6.1.4.1.11.2.23.0.24452
Hot Swap Cage: Emergency temperature exceeded!
hpnsaHotSwapPowerFailure
.1.3.6.1.4.1.11.2.23.0.24453
Power connection failure in one of the devices in the hot swap cage
hpnsaHotSwapDeviceRemoved
.1.3.6.1.4.1.11.2.23.0.24454
A device has been removed from the hot swap cage
hpnsaHotSwapDeviceInserted
.1.3.6.1.4.1.11.2.23.0.24455
A device has been inserted into the hot swap cage
hpnsaStorageCapWarning
.1.3.6.1.4.1.11.2.23.0.4096
Volume Storage Capacity has exceeded the warning
threshold level.
hpnsaStorageCapMinor
.1.3.6.1.4.1.11.2.23.0.4097
Volume Storage Capacity has exceeded the minor
threshold level.
hpnsaStorageCapMajor
.1.3.6.1.4.1.11.2.23.0.4098
Volume Storage Capacity has exceeded the major
threshold level.
hpnsaPostError
.1.3.6.1.4.1.11.2.23.0.4356
Post Error has occurred.
hpnsaDiskSysDefects
.1.3.6.1.4.1.11.2.23.0.8210
The Defect List Threshold has been exceeded.
hpnsaDaCacheError
.1.3.6.1.4.1.11.2.23.0.8609
HPDA Controller: Cache Error
hpnsaDaLogicalDriveTrap
.1.3.6.1.4.1.11.2.23.0.8625
HPDA Logical Drive: Critical
hpnsaDaLogicalDriveNotAvailable
.1.3.6.1.4.1.11.2.23.0.8626
HPDA Logical Drive Not Available
hpnsaDaHotSpareFailure
.1.3.6.1.4.1.11.2.23.0.8641
HPDA Hot Spare:Failed
hpnsaDaHotSpareSuccess
.1.3.6.1.4.1.11.2.23.0.8642
HPDA Hot Spare Succeeded
hpnsaDaHardDiskFailure
.1.3.6.1.4.1.11.2.23.0.8657
HPDA Hard Disk Failed
hpnsaDaParityThresholdTrap
.1.3.6.1.4.1.11.2.23.0.8673
HPDA Threshold Exceeded: Parity
hpnsaDaSoftErrorThresholdTrap
.1.3.6.1.4.1.11.2.23.0.8674
HPDA Threshold Exceeded: Soft Errors
hpnsaDaHardwareThresholdTrap
.1.3.6.1.4.1.11.2.23.0.8675
HPDA Threshold Exceeded: Hardware Errors
hpnsaDaMiscThresholdTrap
.1.3.6.1.4.1.11.2.23.0.8676
HPDA Threshold Exceeded: Miscellaneous Errors
hpnsaDaControllerTrap
.1.3.6.1.4.1.11.2.23.0.8677
HPDA Controller: NVRAM Age
hpnsaRPSAbnormalCondition
.1.3.6.1.4.1.11.2.23.0.9101
The Redundant Power Supply module is not operating properly,
but there is no power supply module hardware failure.
hpnsaRPSACPowerSourceFailure
.1.3.6.1.4.1.11.2.23.0.9103
Indicates a failure with the AC power source that is
connected to one of the redundant power supply units.
hpnsaRPSPsuFailureDetected
.1.3.6.1.4.1.11.2.23.0.9105
Indicates that one of the redundant power supply modules
is not in normal operating condition.
hpnsaRPSDCShutdown
.1.3.6.1.4.1.11.2.23.0.9106
Indicates that one of the redundant power supply modules
is in over temperature protection mode.
hpnsaRPSPsuRemoved
.1.3.6.1.4.1.11.2.23.0.9107
Indicates that one of the redundant power supply modules
has been physically removed from the HP NetServer Power
Supply Subsystem.
hpnsaRPSPsuInserted
.1.3.6.1.4.1.11.2.23.0.9108
Indicates that one of the redundant power supply modules
has been physically inserted into the HP NetServer Power
Supply Subsystem.
hpnsaRPSPowerRestored
.1.3.6.1.4.1.11.2.23.0.9109
Indicates that one of the redundant power supply modules
in the HP NetServer has recovered from an over temperature
protection mode.
hpnsaRPSWarningExceeded
.1.3.6.1.4.1.11.2.23.0.9110
Indicates that one of the redundant power supply modules
in the HP NetServer has exceeded the warning temperature
level.
hpnsaRPSEmergencyExceeded
.1.3.6.1.4.1.11.2.23.0.9111
Indicates that one of the redundant power supply modules
in the HP NetServer has exceeded the emergency temperature
level.
hpnsaEccErrorCorrected
.1.3.6.1.4.1.11.2.23.6.0.4353
An ECC single-bit error has been corrected in one of the memory
modules
hpnsaEccSBEOverflow
.1.3.6.1.4.1.11.2.23.6.0.4354
Error logging for ECC single-bit errors has been disabled due to too
many SBE's detected in a short time period
hpnsaEccMemoryResize
.1.3.6.1.4.1.11.2.23.6.0.4355
ECC Memory size has been adjusted during the Power-On-Self-Test
during the last boot due to a failed memory module
hpnsaEccMultiBitError
.1.3.6.1.4.1.11.2.23.6.0.4357
An ECC double-bit error has occurred in one of the memory modules
hpnsaEccMultiBitErrorOverflow
.1.3.6.1.4.1.11.2.23.6.0.4358
Error logging for ECC multiple-bit errors has been disabled due to too
many MBE's detected in a short time period
hpnsaRAVoltServerPowerFailure
.1.3.6.1.4.1.11.2.23.8.0.109
The server has lost the power completely.
hpnsaRAVoltMinus12VUpper
.1.3.6.1.4.1.11.2.23.8.0.111
Voltage measured in the server has gone outside of -12V Upper
Threshold.
hpnsaRAVoltPlus3VUpper
.1.3.6.1.4.1.11.2.23.8.0.113
Voltage measured in the server has gone outside of +3.3V Upper
Threshold.
hpnsaRAVoltPlus5VUpper
.1.3.6.1.4.1.11.2.23.8.0.114
Voltage measured in the server has gone outside of +5V Upper
Threshold.
hpnsaRAVoltPlus12VUpper
.1.3.6.1.4.1.11.2.23.8.0.115
Voltage measured in the server has gone outside of +12V Upper
Threshold.
hpnsaRAVoltMinus12VLower
.1.3.6.1.4.1.11.2.23.8.0.121
Voltage measured in the server has gone outside of -12V Lower
Threshold.
hpnsaRAVoltBatteryLower
.1.3.6.1.4.1.11.2.23.8.0.122
The HP Remote Assistant Card's battery charging circuit is
bad.
hpnsaRAVoltPlus3VLower
.1.3.6.1.4.1.11.2.23.8.0.123
Voltage measured in the server has gone outside of +3.3V Lower
Threshold.
hpnsaRAVoltPlus5VLower
.1.3.6.1.4.1.11.2.23.8.0.124
Voltage measured in the server has gone outside of +5V Lower
Threshold.
hpnsaRAVoltPlus12VLower
.1.3.6.1.4.1.11.2.23.8.0.125
Voltage measured in the server has gone outside of +12V Lower
Threshold.
hpnsaRATempWarning
.1.3.6.1.4.1.11.2.23.8.0.211
The server temperature measured on the HP Remote Assistant Card has
exceeded the configured warning threshold.
hpnsaRATempShutdown
.1.3.6.1.4.1.11.2.23.8.0.221
The server temperature measured on the HP Remote Assistant Card has
exceeded the configured threshold and the server has been
automatically shut down.
hpnsaRATempCritical
.1.3.6.1.4.1.11.2.23.8.0.231
The server temperature measured on the HP Remote Assistant Card has
exceeded the configured Graceful Shutdown threshold value by 5
degrees C and the server has been automatically shut down.
hpnsaRASuccessfulLogin
.1.3.6.1.4.1.11.2.23.8.0.401
An administrator has logged in to the HP Remote Assistant Card.
hpnsaRAIllegalLogin
.1.3.6.1.4.1.11.2.23.8.0.402
An unauthorized user has made 3 or more unsuccessful attempts
to log in to the HP Remote Assistant Card within a 5-minute
period of time.
hpnsaRALowBatteryCharge
.1.3.6.1.4.1.11.2.23.8.0.403
The HP Remote Assistant Card's battery charging circuit is
bad.
hpnsaRABoardShutDown
.1.3.6.1.4.1.11.2.23.8.0.404
The HP Remote Assistant Card has been shut down.
hpnsaRAAdminstratorLogout
.1.3.6.1.4.1.11.2.23.8.0.405
An administrator disconnected from the HP Remote Assistant board.
hpnsaRAAdministratorAutologout
.1.3.6.1.4.1.11.2.23.8.0.406
An administrator has been automatically disconnected from the HP Remote
Assistant board. The administrator was inactive for more than five minutes.
hpnsaRAAdministratorConnectionLost
.1.3.6.1.4.1.11.2.23.8.0.407
An administrator has been prematurely disconnected from the Remote Assistant
board.
hpnsaRAAdministratorDialbackFailed
.1.3.6.1.4.1.11.2.23.8.0.408
An administrator failed to connect to the HP Remote Assistant board on a
dialback
hpnsaRAASRHangNOS
.1.3.6.1.4.1.11.2.23.8.0.501
ASR has stopped notifying the HP Remote Assistant Card that the
system is running correctly (the server probably hung or crashed).
hpnsaRAASRServerRestart
.1.3.6.1.4.1.11.2.23.8.0.502
The HP Remote Assistant card has restarted the server due to the
NOS being hung.
hpnsaRAASRTimerEnabled
.1.3.6.1.4.1.11.2.23.8.0.503
The Automatic Server Restart software has been enabled by the Remote Assistant
ASR timer.
hpnsaRAASRTimerDisabled
.1.3.6.1.4.1.11.2.23.8.0.504
The HP Remote Assistant Automatic Server Restart timer has been disabled.
hpnsaRARemoteInitiatedCtrlAltDel
.1.3.6.1.4.1.11.2.23.8.0.601
An administrator has executed a remote on the
server via the HP Remote Assistant Card.
hpnsaRARemoteInitiatedReset
.1.3.6.1.4.1.11.2.23.8.0.602
An administrator has executed a remote power cycle on the
server via the HP Remote Assistant Card.
hpnsaRARemoteInitiatedPowerDown
.1.3.6.1.4.1.11.2.23.8.0.603
An administrator has executed a remote power down of the
server via the HP Remote Assistant Card.
hpnsaRAInitServerBIOS
.1.3.6.1.4.1.11.2.23.8.0.701
The server's BIOS has successfully initialized the HP Remote
Assistant Card during the boot process.
hpnsaRABusUtilization
.1.3.6.1.4.1.11.2.23.8.0.800
The 5-minute average EISA bus utilization has exceeded the
configured threshold.
hpnsaRATestNotification
.1.3.6.1.4.1.11.2.23.8.0.900
An administrator has executed Test Page from the HP Remote
Assistant Configuration Utility.
hpnsaRATAPNoConnect
.1.3.6.1.4.1.11.2.23.8.0.901
The HP Remote Assistant modem was unable to connect to the
TAP paging service modem.
hpnsaRATAPParam1Error
.1.3.6.1.4.1.11.2.23.8.0.902
HP Remote Assistant was unable to connect with the TAP
paging service.
hpnsaRATAPParam2Error
.1.3.6.1.4.1.11.2.23.8.0.903
HP Remote Assistant was unable to log on to the TAP
paging service.
hpnsaRATAPParam3Error
.1.3.6.1.4.1.11.2.23.8.0.904
The HP Remote Assistant pager message was rejected by the
TAP paging service.
rtConfigUpdated
.1.3.6.1.4.1.16.1.1.200.0.9001
Adapter-%d: A New Configuration has been written.
rtPhysicalDriveStateChange
.1.3.6.1.4.1.16.1.1.200.0.9002
Adapter-%d, Channel-%d, Target-%d: Drive State Changed from %s to %s.
rtLogicalDriveStateChange
.1.3.6.1.4.1.16.1.1.200.0.9003
Adapter-%d, Logical Drive-%d: State Changed from %s to %s.
Adapter-%d, Channel-%d, Target-%d: Command Completed with
Sense_Key-0x%x ASC-0x%x ASCQ-0x%x.
rtNewDriveInserted
.1.3.6.1.4.1.16.1.1.200.0.9019
Adapter-%d, Channel-%d, Target-%d: New Device Inserted.
rtBatteryMissing
.1.3.6.1.4.1.16.1.1.200.0.9020
Adapter-%d: Battery Module is missing.
rtBatteryVolatageLow
.1.3.6.1.4.1.16.1.1.200.0.9021
Adapter-%d: Battery Module Voltage is Low.
rtBatteryTemperatureHigh
.1.3.6.1.4.1.16.1.1.200.0.9022
Adapter-%d: Battery Module Temperature Exceeded Danger Threshold.
cycSNMPAgentIsUp
.1.3.6.1.4.1.795.2.5.0.101
SNMP Agent is up.
cycSNMPAgentIsDown
.1.3.6.1.4.1.795.2.5.0.102
SNMP Agent is down.
cycDuplicateHostAdapter
.1.3.6.1.4.1.795.2.5.0.107
Cyclone: duplicate hostadapter ID
cycHostAdapterDiscovered
.1.3.6.1.4.1.795.2.5.0.108
The HostAdapter# %d with HostAdapter Id %s
and Manager Id %s is discovered
cycHostAdapterChanged
.1.3.6.1.4.1.795.2.5.0.109
The HostAdapter# %d has new HostAdapter Id %s
and Manager Id %s
cycHostAdapterFailed
.1.3.6.1.4.1.795.2.5.0.110
The HostAdapter# %d has Failed
cycHostAdapterRecovered
.1.3.6.1.4.1.795.2.5.0.111
Host Adapter# %d recovered
cycDeviceFailed
.1.3.6.1.4.1.795.2.5.0.112
The HostAdapter# %d , TargetID %d,
Lun# %d has failed
cycDeviceDiscovered
.1.3.6.1.4.1.795.2.5.0.113
The HostAdapter# %d , TargetID %d,
Lun# %d of vendor %s product %s
has discovered
cycDeviceRecovered
.1.3.6.1.4.1.795.2.5.0.114
The HostAdapter# %d , TargetID %d,
Lun# %d has recovered
cycDeviceChanged
.1.3.6.1.4.1.795.2.5.0.115
The HostAdapter# %d , TargetID %d,
Lun# %d has new Vendor %s and
Product %s information
cycPredictiveFailure
.1.3.6.1.4.1.795.2.5.0.116
The HostAdapter# %d , TargetID %d,
Lun# %d has Predictive Failure Condition
on vendor %s product %s with sense info
MSB(sense code), next 8 bits(sense code Qual)
next 8 bits (Add sense code Qual) LSB (0000) %d
cycAspiDatabaseCleared
.1.3.6.1.4.1.795.2.5.0.117
The Aspi database is cleared and therefore
all the previous information are not available
cycAspiCrash
.1.3.6.1.4.1.795.2.5.0.118
The Aspi has crashed
cycAspiNoMemory
.1.3.6.1.4.1.795.2.5.0.119
No memory left for Aspi Operations
cycAspiFileWriteOpenError
.1.3.6.1.4.1.795.2.5.0.120
Unable to open Aspi file for writing,
problem exists in server hard disk
cycAspiFileWriteError
.1.3.6.1.4.1.795.2.5.0.121
Unable to open Aspi file ,
problem exists in server hard disk
cycAspiNoDeviceFile
.1.3.6.1.4.1.795.2.5.0.122
Aspi device file doesnot exist
cycAspiNoMemoryReading
.1.3.6.1.4.1.795.2.5.0.123
Aspi: Memory allocation is failing
cycAspiFileReadError
.1.3.6.1.4.1.795.2.5.0.124
Aspi: unable to read the file
server hard disk might have problems
cycAspiBadFileMagic
.1.3.6.1.4.1.795.2.5.0.125
Aspi: database is corrupted
hpnsaScsiStatusCorruptedDB
.1.3.6.1.4.1.795.4.1.0.8193
Device Database has been corrupted.
hpnsaScsiStatusUnloadedNLM
.1.3.6.1.4.1.795.4.1.0.8194
SCSI Status agent was unloaded from a NetWare Server.
hpnsaScsiStatusFailedHBA
.1.3.6.1.4.1.795.4.1.0.8196
One of the SCSI HBAs can no longer be detected by the
SCSI Status agent.
hpnsaScsiStatusRecoveredHBA
.1.3.6.1.4.1.795.4.1.0.8197
A Host Adapter which has failed, has become accessible
again.
hpnsaScsiStatusDiscoveredHBA
.1.3.6.1.4.1.795.4.1.0.8198
A new SCSI Host Bus Adapter has been discovered or
device database has been cleared.
hpnsaScsiStatusDeviceFailed
.1.3.6.1.4.1.795.4.1.0.8199
One of the SCSI devices installed on the server can
no longer be detected by the SCSI Status agent.
hpnsaScsiStatusDeviceRecovered
.1.3.6.1.4.1.795.4.1.0.8200
A SCSI device which has failed, has become accessible
again.
hpnsaScsiStatusDeviceDiscovered
.1.3.6.1.4.1.795.4.1.0.8201
A new SCSI device has been discovered.
hpnsaScsiStatusChangedHBA
.1.3.6.1.4.1.795.4.1.0.8205
The SCSI Status agent detected that the Host Bus Adapter
has been changed.
hpnsaScsiStatusDeviceChanged
.1.3.6.1.4.1.795.4.1.0.8206
The SCSI Status agent detected that a SCSI device installed on
the server has been changed.
hpnsaScsiStatusTimeoutHBA
.1.3.6.1.4.1.795.4.1.0.8208
The SCSI Status agent sent a request to an HBA and the request
never completed.
hpnsaScsiStatusDeviceTimeout
.1.3.6.1.4.1.795.4.1.0.8209
The SCSI Status agent sent a request to a SCSI device and the
request never completed.
hp 
rtAdapterNumber 
hpnsaTempMonitorError