HPN-ICF-SUBNET-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
11

hpnicfSubnetVlanTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfSubnetVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-SUBNET-VLAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanTable' 
Subnet-based VLAN configuration table.
hpnicfSubnetVlanEntry row .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1
Subnet-based VLAN configuration entry.
Indexes
Column Syntax OID
hpnicfSubnetVlanVlanId
Vlan id.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.1
hpnicfSubnetVlanSubnetIndex
The subnet index value of a row in this table is from zero to
the value of hpnicfSubnetNumPerVlan subtracting one.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.2
hpnicfSubnetVlanVlanIpAddressType
There are two kinds of ip address supported by VLAN.
One is IPv4, which is 32 bits.
The other is IPv6, which is 128 bits.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.3
hpnicfSubnetVlanIpAddressValue
The ip address of the configured subnet on VLAN, which can be an IPv4
or IPv6.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.4
hpnicfSubnetVlanNetMaskValue
The net mask of the configured subnet on VLAN, which can be an IPv4 or
IPv6.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.5
hpnicfSubnetVlanRowStatus
The row status of this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.2.1.6

hpnicfSubnetVlanPortCreateTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.61.1.3 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfSubnetVlanPortCreateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-SUBNET-VLAN-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-SUBNET-VLAN-MIB::hpnicfSubnetVlanPortCreateTable' 
Subnet-based VLAN port table.
hpnicfSubnetVlanPortCreateEntry row .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1
Subnet-based VLAN port creation entry.
Indexes
Column Syntax OID
hpnicfSubnetVlanPortCreateIndex
The port index.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.1
hpnicfSubnetVlanPortCreateVlanId
The subnet-based VLAN id.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.2
hpnicfSubnetVlanPortInfoVlanId
This value is the same as the value of hpnicfSubnetVlanPortCreateVlanId index.
All of the subnet information in this port,
is described on vlan, whose VLAN id is the value of hpnicfSubnetVlanPortInfoVlanId.
The VLAN id …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.3
hpnicfSubnetVlanPortRowStatus
The row status of this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.4
hpnicfSubnetVlanPortStatus
The subnet VLAN status on the port. The value is active only
when hpnicfSubnetVlanPortCreateVlanId has the corresponding entry in
hpnicfSubnetVlanTable, the port link type is hybrid, and the VLAN is
allowed by the port…
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.11.2.14.11.15.2.61.1.3.1.5