HPN-ICF-RPR-MIB Table View

This table contains the specs of RPR ring.

hpnicfRprMaxmumDefineEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1

The entry of RPR Maximum Table.

Indexes

hpnicfRprMaxMumIfIndex

Column	Syntax	OID
hpnicfRprMaxMumIfIndexmandatory The ifIndex of this RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.1
hpnicfRprMaxStationNumDefinemandatory Max station number supported by RPR ring.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.2
hpnicfRprMaxReservedRateDefinemandatory Max reserved rate supported by each RPR ringlet. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewher…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.1.1.1.3

This table contains additional objects
for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB.

hpnicfRprTopoImageXEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1

Each entry contains information specific to a particular
station on the ring. The table has at least one entry for
the station itself, this entry indicates zero hops on each
ringlet.

Indexes

No indexes recorded

Column	Syntax	OID
hpnicfRprTopoImageXWestEdgeStatusmandatory The current edge status of the west span. If an edge exists,the hpnicfRprTopoImageXWestEdgeStatus is true. Otherwise, the hpnicfRprTopoImageXWestEdgeStatus is false.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1.3
hpnicfRprTopoImageXEastEdgeStatusmandatory The current edge status of the east span. If an edge exists, the hpnicfRprTopoImageXEastEdgeStatus is true. Otherwise, the hpnicfRprTopoImageXEastEdgeStatus is false.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1.4
hpnicfRprTopoImageXStationNamemandatory The operator assigned station name. The operator can assigned it by hpnicfRprTopoImageXStationName.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.2.1.1.5

The RPR Source Mac Count Table contains the cumulative sum
of frames and octects from the particular source station.

hpnicfRprSrcMacCountEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1

An entry in the RPR Source Mac Count Table.

Indexes

hpnicfRprSrcMacCountIfIndex hpnicfRprSrcMacCountBySrcAddress

Column	Syntax	OID
hpnicfRprSrcMacCountIfIndexmandatory The ifIndex of this RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.1
hpnicfRprSrcMacCountBySrcAddressmandatory MAC address of the source station where the frames come from.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.2
hpnicfRprSrcMacCountReceivedFramesmandatory Frames received from a particular MAC address of source station.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.3
hpnicfRprSrcMacCountReceivedOctetsmandatory Octets received from a particular MAC address of source station.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.1.1.4

The RPR Destination MAC Count Table contains the cumulative sum
of  frames and octects to the particular destination station.

hpnicfRprDestMacCountEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1

An entry in the RPR MAC Destination Count Table.

Indexes

hpnicfRprDestMacCountIfIndex hpnicfRprDestMacCountByDestAddress

Column	Syntax	OID
hpnicfRprDestMacCountIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.1
hpnicfRprDestMacCountByDestAddressmandatory MAC address of the destination station where the frames are sent to.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.2
hpnicfRprDestMacCountReceivedFramesmandatory Frames sent to a particular MAC address of destination station.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.3
hpnicfRprDestMacCountReceivedOctetsmandatory Octets sent to a particular MAC address of destination station.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.2.1.4

The RPR Packet Drop Count Table contains the cumulative sum
of packets dropped for congestion.

hpnicfRprPktDropCountEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1

An entry in the RPR Packet Drop Count Table.

Indexes

hpnicfRprPktDropCntIfIndex hpnicfRprPktDropCntRingletID

Column	Syntax	OID
hpnicfRprPktDropCntIfIndexmandatory The ifIndex of this RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.1
hpnicfRprPktDropCntRingletIDmandatory The RPR Ringlet of the station through which the packets transmit.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.2
hpnicfRprDownFlowClassAPktDropsmandatory The total dropped number of Class A packets which transmit down from the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.3
hpnicfRprUpFlowClassAPktDropsmandatory The total dropped number of Class A packets which transmit up to the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.4
hpnicfRprDownFlowClassBPktDropsmandatory The total dropped number of Class B packets which transmit down from the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.5
hpnicfRprUpFlowClassBPktDropsmandatory The total dropped number of Class B packets which transmit up to the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.6
hpnicfRprDownFlowClassCPktDropsmandatory The total dropped number of Class C packets which transmit down from the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.7
hpnicfRprUpFlowClassCPktDropsmandatory The total dropped number of Class C packets which transmit up to the host.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.3.3.1.8

The RPR Static Ring Selection table contains the static
ring selection information by the way of configuration.

hpnicfRprStaticRSEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1

An entry in the RPR Static Ring Selection table.

Indexes

hpnicfRprStaticRSIfIndex hpnicfRprStaticRSMacAddress

Column	Syntax	OID
hpnicfRprStaticRSIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.1
hpnicfRprStaticRSMacAddressmandatory The MAC address of the station on the ring.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.2
hpnicfRprStaticRSRingletIDmandatory The identifier of the ring which frames are sent from one station to another. Ringlet0 refers to outer ring, while ringlet1 does inner.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.3
hpnicfRprStaticRSTtlmandatory The hops from source station to destination station by the selected ringlet.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.4
hpnicfRprStaticRSValidmandatory The flag identify whether the configed ringlet is valid. If it is true, the configed ringlet is valid, otherwise it's invalid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.5
hpnicfRprStaticRSRowStatusmandatory The status of this table entry. The status includes createAndGo, active and destroy.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.1.1.6

The RPR Ipv4Dynamic Ring Selection Table that contains the
dynamic ring selection information by shortest path.

hpnicfRprIpv4DynamicRSEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1

An entry in the RPR Ipv4Dynamic Ring Selection Table.

Indexes

hpnicfRprIpv4DynamicRSIfIndex hpnicfRprIpv4DynamicRSMacAddress

Column	Syntax	OID
hpnicfRprIpv4DynamicRSIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.1
hpnicfRprIpv4DynamicRSMacAddressmandatory The Ipv4 MAC address of destination station on the ring.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.2
hpnicfRprIpv4DynamicRSRingletIDmandatory The identifier of the ring which frames are sent from the source station to the destination station.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.3
hpnicfRprIpv4DynamicRSTtlmandatory The hops from source station to destination station by the selected ringlet.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.2.1.4

The RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6
ring selection information by dynamic ring selection and static
ring selection.

hpnicfRprIpv6DynamicRSEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1

An entry in the RPR Ipv6 Ring Selection Table.

Indexes

hpnicfRprIpv6DynamicRSIfIndex hpnicfRprIpv6DynamicRSMacAddress

Column	Syntax	OID
hpnicfRprIpv6DynamicRSIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.1
hpnicfRprIpv6DynamicRSMacAddressmandatory The Ipv6 MAC address of the destination station on the ring.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.2
hpnicfRprIpv6DynamicRSRingletIDmandatory The identifier of the ring which frames are sent from the source station to the destination station.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.3
hpnicfRprIpv6DynamicRSTtlmandatory The hops from source station to destination station by selected ringlet.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.3.1.4

The RPR Ipv4 Overall Ring Selection Table that contains the
overall and active  ring selection infomation by dynamic ring
selection and static ring selection.

hpnicfRprIpv4OverallRSEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1

An entry in the RPR Overall Ring Selection Table.

Indexes

hpnicfRprIpv4OverallRSIfIndex hpnicfRprIpv4OverallRSMacAddress

Column	Syntax	OID
hpnicfRprIpv4OverallRSIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.1
hpnicfRprIpv4OverallRSMacAddressmandatory The MAC address of the destination station on the ring.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.2
hpnicfRprIpv4OverallRSTypemandatory The ring selection item type indicates static or dynamic.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.3
hpnicfRprIpv4OverallRSRingletIDmandatory The identifier of the ring which frames are sent from the source station to the destination station.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.4
hpnicfRprIpv4OverallRSTtlmandatory The hops from source station to destination station by selected ringlet.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.4.1.5

The RPR VRRP Ring Selection Table that contains the ring
selection information when the vrrp group is configured.

hpnicfRprVrrpRSEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1

An entry in the RPR VRRP Ring Selection Table.

Indexes

hpnicfRprVrrpRSIfIndex hpnicfRprVrrpRSVirtualMacAddress

Column	Syntax	OID
hpnicfRprVrrpRSIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.1
hpnicfRprVrrpRSVirtualMacAddressmandatory The virtual MAC address of the staion in VRRP group.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.2
hpnicfRprVrrpRSMacAddressmandatory The MAC address of the station that is the master in VRRP group.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.3
hpnicfRprVrrpRSRingletIDmandatory The identifier of the ring which frames are sent from the source station to the destination station.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.4
hpnicfRprVrrpRSTtlmandatory The hops from source station to destination station by selected ringlet.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.5.1.5

The RPR Default RingID Table specify the default ringID.

hpnicfRprDefaultRingIDEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1

An entry in the RPR Default RingID Table.

Indexes

hpnicfRprDefaultRingIDIfIndex

Column	Syntax	OID
hpnicfRprDefaultRingIDIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1.1
hpnicfRprDefaultConfigRingletIDmandatory The default identifier of the ring configured by user.	HpnicfRprRingletIDr/w Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1.2
hpnicfRprDefaultActiveRingIDmandatory The identifier of the default ring which is active currently. The default ring configured by user may be inactive.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.4.6.1.3

The RPR Defect Report Table that contains the trap information on
the ring.

hpnicfRprDefectReportEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1.1

An entry in the RPR Defect Report Table.

Indexes

hpnicfRprDefectIfIndex

Column	Syntax	OID
hpnicfRprDefectIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1.1.1
hpnicfRprDefectCurrentStatusmandatory Indicates the current status of RPR ring. This attribute is used to notify the management system that alarms generate or clear about some RPR ring.	Bits Enumerated Values: 0 topologyOpenRing 1 topoInstability 2 topoInconsistent 3 dulpMacAddress 4 dulpIPAddress 5 lrttDefect 6 protCfgDefect 7 jumboCfgDefect 8 excessReservedRateDefect 9 excessMaxStationNum 10 miscabling 11 backPressure	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.5.1.1.2

The Table is for Class Of Service and RPR Service Class Mapping.

hpnicfRprPriority2ClassMapEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1

An entry in the COS to Service Class Map Table.

Indexes

hpnicfRprPriority2ClassMapIfIndex hpnicfRprPriority2ClassMapType hpnicfRprPriorityValue

Column	Syntax	OID
hpnicfRprPriority2ClassMapIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.1
hpnicfRprPriority2ClassMapTypemandatory The type of Priority,include tag, mpls, ip.	Enumeration Enumerated Values: 1 tag 2 mpls 3 ip	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.2
hpnicfRprPriorityValuemandatory The priority of tag,mpls and ip, the value range is 0~7.	Enumeration Enumerated Values: 1 pri0 2 pri1 3 pri2 4 pri3 5 pri4 6 pri5 7 pri6 8 pri7	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.3
hpnicfRprPriority2ClassMapmandatory The RPR service class.	HpnicfRprServiceClassr/w Type Values: 1 classC 2 classB 3 classA1 4 classA0	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.6.1.1.4

The RPR Rate Limit Configuration Table that contains the rate
limit infomation of RPR serviec class.

hpnicfRprRateLimitConfigEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1

An entry in the RPR Rate Limit Configuration Table.

Indexes

hpnicfRprRateLimitConfigIfIndex hpnicfRprRateLimitConfigRingletId hpnicfRprRateLimitConfigServiceClass

Column	Syntax	OID
hpnicfRprRateLimitConfigIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.1
hpnicfRprRateLimitConfigRingletIdmandatory The identifier of the ring of RPR ringlet.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.2
hpnicfRprRateLimitConfigServiceClassmandatory The RPR service class.	HpnicfRprServiceClass Type Values: 1 classC 2 classB 3 classA1 4 classA0	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.3
hpnicfRprRateLimitConfigValuemandatory The value of rate-limit that configured for diffrent service class. The unit is permillage.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.7.1.1.4

The RPR MAC Address Table.

hpnicfRprMacLearnCfgEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1

The entry of RPR MAC Address Table.

Indexes

hpnicfRprMacLearnIfIndex hpnicfRprMacLearnRprMac

Column	Syntax	OID
hpnicfRprMacLearnIfIndexmandatory The ifIndex of RPR interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.1
hpnicfRprMacLearnRprMacmandatory The MAC address of the RPR station.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.2
hpnicfRprMacLearnTypemandatory The type of MAC address item that the user built. The type includes static and dynamic.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.3
hpnicfRprMacLearnDestMacmandatory The destination of MAC address.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.4
hpnicfRprMacLearnVlanIdmandatory The vlan ID that the MAC address learned from by RPR staion.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.5
hpnicfRprMacLearnRingletmandatory The identifier of the ring which frames are sent from the source station to the destination station.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.6
hpnicfRprMacLearnTtlmandatory The hops from source station to destination station on the selected ringlet.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.7
hpnicfRprMacLearnIsValidmandatory The flag identify whether the configured mac address is valid. If it is true, the configured mac address is valid, otherwise it's invalid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.8
hpnicfRprMacLearnRowStatusmandatory The status of this table entry. The status includes createAndGo, active and destroy.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.8.1.1.9

The RPR Defect Report Table that contains varible that
used to bind in trap.

hpnicfRprTrapVarEntry row .1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1

An entry in the RPR Trap Var Table.

Indexes

hpnicfRprTrapIfIndex

Column	Syntax	OID
hpnicfRprTrapIfIndexmandatory The ifIndex of RPR interface. It is only used for trap to bind.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.1
hpnicfRprTrapRingletmandatory The span of RPR station. It is only used for trap to bind.	HpnicfRprRingletID Type Values: 1 ringlet0 2 ringlet1	.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.2
hpnicfRprTrapTopoMacAddressmandatory The MAC address of RPR station. It is only used for trap to bind.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.3
hpnicfRprTrapIpAddressmandatory The IP address of RPR station. It is only used for trap to bind.		.1.3.6.1.4.1.11.2.14.11.15.2.60.1.9.1.1.4