HPN-ICF-NQA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
160

hpnicfNqaCtlTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.2 · 1 row entry · 16 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaCtlTable' 
Defines the NQA Control Extend Table for providing, via SNMP,
the capability of performing network analysis operations at a
remote host.
hpnicfNqaCtlEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1
Defines an entry in the hpnicfNqaCtlTable. The operation of this
table is same as that of pingResultsTable.
Indexes
No indexes recorded
Column Syntax OID
hpnicfNqaCtlTargetPort
The destination port that may be used by udpEcho,
tcpConnect and jitter probes.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.1
hpnicfNqaCtlSourcePort
The source port that may be used by all tests except
for dns and dlsw.
If no source port is specified, system will create
a random port as source port.
Integer32r/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.2
hpnicfNqaCtlTTL
Specifies the value to store in the TTL Field in the IP packet used to
encapsulate the NQA probe.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.3
hpnicfNqaCtlJitterAdminInterval
Time value in milliseconds that is an interval between two continuous
probes in jitter test.

This object is only used by jitter test.
millisecondsInteger32r/w
Constraints:
range: 0-60000
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.4
hpnicfNqaCtlJitterAdminNumPackets
Packet number that specifys how many packets will be sent in
one jitter test.

This object is only used by jitter test.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.5
hpnicfNqaCtlHttpOperationType
Http operation type: get, post or raw.
Enumerationr/w
Enumerated Values:
1get
2post
3raw
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.6
hpnicfNqaCtlHttpOperationString
Http operation string. For example, if the http operation type is get,
the string will be url, home page and http version.
OctetStringr/w
Constraints:
range: 0-1023
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.7
hpnicfNqaCtlFtpOperationType
Ftp operation type.
Enumerationr/w
Enumerated Values:
1get
2put
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.8
hpnicfNqaCtlFtpUsername
Ftp username.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.9
hpnicfNqaCtlFtpPassword
Ftp password.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.10
hpnicfNqaCtlFtpOperationString
Ftp operation string. If the ftp operation type is get,
the string must be the file name which will be gotten from ftp server.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.11
hpnicfNqaCtlVPNInstance
VPN name by which system finds route in the specified VPN
to send NQA probe packets.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.12
hpnicfNqaCtlHistoryKeptTime
To indicate how long the history records will be saved
in the pingProbeHistoryTable table after the test stopped.
minutesInteger32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.13
hpnicfNqaCtlHistoryEnable
To indicate whether the history should be recorded in the
PingProbeHistoryTable or not.
enabled(1) --history will be recorded
disabled(2) --history will not be recorded.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.14
hpnicfNqaCtlICPIFAdvFactor
The advantage factor depends on the type of access and how the service
is to be used. This object will be used while calculating the ICPIF
(Calculated Planning Impairment Factor) values. This is applicable
only for the…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.15
hpnicfNqaCtlCodecType
To indicate the codec type to be used with jitter probe. This is
applicable only for the jitter probe.
Enumerationr/w
Enumerated Values:
1notDefined
2g711Alaw
3g711Ulaw
4g729A
5icmpTimestamp
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.2.1.16

hpnicfNqaResultsTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.3 · 1 row entry · 20 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaResultsTable' 
Defines the NQA Results Extend Table for providing
the capability of performing NQA operations at a remote
host. The results of these operations are stored in the
hpnicfNqaResultsTable. The operation of this table is same
as that of pingResultsTable.
hpnicfNqaResultsEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1
The operation of this table is same as that of pingResultsTable.
Indexes
Column Syntax OID
hpnicfNqaResultsRttNumDisconnects
The number of times that a NQA probe failed because
the destination became disconnected.

For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.1
hpnicfNqaResultsRttTimeouts
The number of times that a NQA probe failed because the
probe timed out.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.2
hpnicfNqaResultsRttBusies
The number of times that a NQA probe failed because all
NQA tasks have been running.

If a new probe fails to start, the value of this object
is incremented. The next test will not start until the
next Fre…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.3
hpnicfNqaResultsRttNoConnections
The number of times that a NQA probe failed because the probe
destination is unavailable.

For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.4
hpnicfNqaResultsRttDrops
The number of times that a NQA operation failed to initiated
for unavailibility of necessary internal resources.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.5
hpnicfNqaResultsRttSequenceErrors
The number of packets arrived out of sequence.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.6
hpnicfNqaResultsRttStatsErrors
The number of some other errors.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.7
hpnicfNqaResultsMaxDelaySD
The maximal delay from source device to destination device.
Currently this value is only used for jitter test, and this
value must be 0 in other type test. In jitter test, if
destination system time is not valid, the SD…
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.8
hpnicfNqaResultsMaxDelayDS
The maximal delay from destination device to source device.
Currently this value is only used for jitter test, and this
value is 0 in other type test. In jitter test, if destination
system time is not valid, the DS dela…
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.9
hpnicfNqaResultsLostPacketRatio
The value of this object reflects the drop rate of NQA test.
For example, this value is 30 that means source device only
had received 70% packets of total sent packets.
millisecondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.10
hpnicfNqaResultsPacketLateArrival
The value of this object indicates the number of the packets that
arrived after the timeout.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.11
hpnicfNqaResultsRttSum
The sum of round trip time.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.12
hpnicfNqaResultsNumOfDelaySD
The number of delay from source to destination that are
successfully measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.13
hpnicfNqaResultsMinDelaySD
The minimum of all one way times from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.14
hpnicfNqaResultsSumDelaySD
The sum of one way times from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.15
hpnicfNqaResultsSum2DelaySD
The sum of squares of one way times from source to destination.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.16
hpnicfNqaResultsNumOfDelayDS
The number of delay from destination to source that are
successfully measured.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.17
hpnicfNqaResultsMinDelayDS
The minimum of all one way times from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.18
hpnicfNqaResultsSumDelayDS
The sum of one way times from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.19
hpnicfNqaResultsSum2DelayDS
The sum of squares of one way times from destination to source.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.3.1.20

hpnicfNqaJitterStatsTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.4 · 1 row entry · 30 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaJitterStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaJitterStatsTable' 
Statistics table for latest jitter activity.
hpnicfNqaJitterStatsEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1
An entry contains the statistics for the latest jitter activity.
This entry is created only if the pingCtlType is hpnicfNqajitter.
Indexes
Column Syntax OID
hpnicfNqaJitterStatsNumOfRTT
The number of received destination device responses with which
jitter test can reach round-trip time.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.1
hpnicfNqaJitterStatsMinOfPositivesSD
The value of time that records the minimal positive jitter value from
source to destination in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.2
hpnicfNqaJitterStatsMaxOfPositivesSD
The value of time that records the maximal positive jitter value from
source to destination in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.3
hpnicfNqaJitterStatsNumOfPositivesSD
The number that records positive jitter times from source to
destination in the jitter test.
The total number of the value of all positive jitters in packets
sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.4
hpnicfNqaJitterStatsSumOfPositivesSD
The value of time that records the sum of positive jitter values from
source to destination in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.5
hpnicfNqaJitterStatsSum2PositivesSD
The value of time that records the sum of square of positive jitter
values from source to destination in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.6
hpnicfNqaJitterStatsMinOfNegativesSD
The value of time that records the minimal absolute values of
negative jitter value from source to destination in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.7
hpnicfNqaJitterStatsMaxOfNegativesSD
The value of time that records the maximal absolute values of negative
jitter value from source to destination in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.8
hpnicfNqaJitterStatsNumOfNegativesSD
The number that records negative jitter times from source to
destination in the jitter test.
The total number of all negative jitter values in packets
sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.9
hpnicfNqaJitterStatsSumOfNegativesSD
The value of time that records the sum of negative jitter values from
source to destination in the jitter test.
The total number of the value of all negative jitters in packets
sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.10
hpnicfNqaJitterStatsSum2NegativesSD
The value of time that records the sum of square of negative jitter
values from source to destination in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.11
hpnicfNqaJitterStatsMinOfPositivesDS
The value of time that records the minimal positive jitter value from
destination to source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.12
hpnicfNqaJitterStatsMaxOfPositivesDS
The value of time that records the maximal positive jitter value from
destination to source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.13
hpnicfNqaJitterStatsNumOfPositivesDS
The number that records positive jitter times from destination to
source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.14
hpnicfNqaJitterStatsSumOfPositivesDS
The value of time that records the sum of positive jitter values from
destination to source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.15
hpnicfNqaJitterStatsSum2PositivesDS
The value of time that records the sum of square of positive jitter
values from destination to source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.16
hpnicfNqaJitterStatsMinOfNegativesDS
The value of time that records the minimal absolute values of negative
jitter value from destination to source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.17
hpnicfNqaJitterStatsMaxOfNegativesDS
The value of time that records the maximal absolute values of negative
jitter value from destination to source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.18
hpnicfNqaJitterStatsNumOfNegativesDS
The number that records negative jitter times from destination to source
in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.19
hpnicfNqaJitterStatsSumOfNegativesDS
The value of time that records the sum of negative jitter values from
destination to source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.20
hpnicfNqaJitterStatsSum2NegativesDS
The value of time that records the sum of square of negative jitter
values from destination to source in the jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.21
hpnicfNqaJitterStatsPacketLossSD
The lost packets number sent from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.22
hpnicfNqaJitterStatsPacketLossDS
The lost packets number sent from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.23
hpnicfNqaJitterStatsAvePositivesSD
The value of time that records the average positive jitter value
from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.24
hpnicfNqaJitterStatsAveNegativesSD
The value of time that records the average negative jitter value
from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.25
hpnicfNqaJitterStatsAvePositivesDS
The value of time that records the average positive jitter value
from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.26
hpnicfNqaJitterStatsAveNegativesDS
The value of time that records the average negative jitter value
from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.27
hpnicfNqaJitterStatsPktLossUnknown
The number of packets which is lost with unknown reason.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.28
hpnicfNqaJitterStatsOperOfICPIF
The ICPIF (Calculated Planning Impairment Factor) value for the latest
jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.29
hpnicfNqaJitterStatsOperOfMOS
The MOS (Mean Opinion Score) value for the latest jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.4.1.30

hpnicfNqaTcpServerTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.6 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaTcpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaTcpServerTable' 
A table which contains the status of NQA tcp server
configuration information.
hpnicfNqaTcpServerEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1
A table which contains the status of NQA tcp server
configuration information.

This entry includes not only the tcp server ip address
but also the tcp server port.
Indexes
Column Syntax OID
hpnicfNqaTcpServerIpAddress
Tcp server's ip address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.1
hpnicfNqaTcpServerPort
Tcp server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.2
hpnicfNqaTcpServerRowStatus
hpnicfNqaTcpServerIpAddress and hpnicfNqaTcpServerPort
must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.6.1.3

hpnicfNqaUdpServerTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.7 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaUdpServerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaUdpServerTable' 
Status of NQA udp server configuration information.
hpnicfNqaUdpServerEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1
This entry includes not only the udp server ip address
but also the udp server udp port.
Indexes
Column Syntax OID
hpnicfNqaUdpServerIpAddress
Udp server's ip address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.1
hpnicfNqaUdpServerPort
Udp server's port number.
Integer32
Constraints:
range: 0-65536
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.2
hpnicfNqaUdpServerRowStatus
hpnicfNqaUdpServerIpAddress and hpnicfNqaUdpServerPort
must be set during a creation operation.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.7.1.3

hpnicfNqaStatisticsCtlTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.10 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaStatisticsCtlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaStatisticsCtlTable' 
Defines the NQA statistics control table for providing, via SNMP,
the capability of performing NQA operations at a remote host.
The results of these operations are stored in the
hpnicfNqaStatisticsResultsTable and the hpnicfNqaGroupStatsJitterTable.
hpnicfNqaStatisticsCtlEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1
Defines an entry in the hpnicfNqaStatisticsCtlTable.
The hpnicfNqaStatisticsCtlTable has the same index as the
pingCtlTable in order for a hpnicfNqaStatisticsCtlTable to
correspond to the pingCtlEntry.
Indexes
No indexes recorded
Column Syntax OID
hpnicfNqaCtlStatisticsInterval
Statistic information will be calculated after the time that is
the value of hpnicfNqaCtlStatisticsInterval.
minutesSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.1
hpnicfNqaCtlStatisticsGroupNumber
The value of this object indicates the number of group saved.
The length of this object is from 1 to hpnicfNqaStatsMaxGroupNumber.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.2
hpnicfNqaCtlStatisticsKeptTime
To indicate how long the statistic information will be saved after
the test stops.
minutesUnsigned32r/w
Constraints:
range: 1-1440
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.3
hpnicfNqaCtlBeginTime
Time at which the type-specified test will start.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.4
hpnicfNqaCtlLifeTime
To indicate how long the type-specified test will last.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.10.1.5

hpnicfNqaStatisticsResultsTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.11 · 1 row entry · 31 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaStatisticsResultsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaStatisticsResultsTable' 
Defines the NQA statistics results table for providing
the capability of performing NQA operations at a remote
host. The statistics results of these operations in a statistic cycle
are stored in the hpnicfNqaStatisticsResultsTable. The statistic cycle is
the value of hpnicfNqaCtlStatisticsInterval.
The first two index identify the pingCtlEntry that the probe statistics
result (HpnicfNqaStatisticsResultsEntry) belongs to.
hpnicfNqaStatisticsResultsEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1
Defines an entry in the hpnicfNqaStatisticsResultsTable. The
hpnicfNqaStatisticsResultsTable has the same index as the
pingCtlTable in order for a hpnicfNqaStatisticsResultsEntry to
correspond to the pingCtlEntry that c…
Indexes
Column Syntax OID
hpnicfNqaStatResIndex
An entry in this table is created when the statistics
result of a NQA probe is determined.

An implementation MUST start assigning
hpnicfNqaStatResIndex values at 1 and wrap after
exceeding the maximum pos…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.1
hpnicfNqaStatResIpTargetAddressType
This object indicates the type of address stored
in the corresponding hpnicfNqaStatResIpTargetAddress
object.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.2
hpnicfNqaStatResIpTargetAddress
This object represent the host address to be used at a remote host for
performing a network analysis operation.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.3
hpnicfNqaStatResMinRtt
The minimum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.4
hpnicfNqaStatResMaxRtt
The maximum NQA probe round-trip-time (RTT) received. The value
of 0 for this object implies that no RTT has been received.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.5
hpnicfNqaStatResAverageRtt
The average NQA probe round-trip-time (RTT).
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.6
hpnicfNqaStatResProbeResponses
The number of responses received. The value of this object
MUST be reported as 0 when no probe responses have been
received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.7
hpnicfNqaStatResSentProbes
The value of this object reflects the number of probes sent.
The value of this object MUST be reported as 0 when no probes
have been sent.
probesSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.8
hpnicfNqaStatResRttSumOfSquares
This object contains the sum of the squares for all NQA
responses received. The value of this object MUST
be reported as 0 when no NQA responses have been
received.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.9
hpnicfNqaStatResStartTime
This object contains the start time of the statistic.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.10
hpnicfNqaStatResInterval
This object contains the interval between two times of statistic.
secondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.11
hpnicfNqaStatResRttNumDisconnects
The number of times that a NQA probe failed because the destination
became disconnected.
For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.12
hpnicfNqaStatResRttTimeouts
The number of times that a probe failed because the probe timed out.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.13
hpnicfNqaStatResRttBusies
The number of times that a NQA probe failed because
errors related to sockets.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.14
hpnicfNqaStatResRttNoConnections
The number of times that a NQA probe failed because the
probe destination is unavailable.
For connectionless protocol pingCtlTypes, this number should be
zero.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.15
hpnicfNqaStatResRttDrops
The number of times that a NQA operation failed to initiate
for unavailibility of necessary internal resources.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.16
hpnicfNqaStatResRttSequenceErrors
The number of packets arrived out of sequence.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.17
hpnicfNqaStatResRttErrors
The number of other errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.18
hpnicfNqaStatResLostPacketRatio
The value of this object reflects the drop rate of NQA
test packet.
For example, if the value is 30, that means source device
only had received 70 percent packets of total sent packets.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.19
hpnicfNqaStatResPacketLateArrival
The value of this object reflects the number of the packets that
arrived after the timeout.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.20
hpnicfNqaStatResRttSum
This object contains the sum of the squares for all NQA
responses received during the test lifetime. The value of this object
MUST be reported as 0 when no NQA responses have been received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.21
hpnicfNqaStatResNumOfDelaySD
The number of one way times from source to destination that are
successfully measured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.22
hpnicfNqaStatResMinDelaySD
The minimum one way times from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.23
hpnicfNqaStatResMaxDelaySD
The maximum one way times from source to destination.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.24
hpnicfNqaStatResSumDelaySD
The sum of one way times from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.25
hpnicfNqaStatResSum2DelaySD
The sum of squares of one way times from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.26
hpnicfNqaStatResNumOfDelayDS
The number of one way times from destination to source that are
successfully measured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.27
hpnicfNqaStatResMinDelayDS
The minimum one way times from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.28
hpnicfNqaStatResMaxDelayDS
The maximum one way times from destination to source.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.29
hpnicfNqaStatResSumDelayDS
The sum of one way times from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.30
hpnicfNqaStatResSum2DelayDS
The sum of squares of one way times from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.11.1.31

hpnicfNqaGroupStatsJitterTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.12 · 1 row entry · 32 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaGroupStatsJitterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaGroupStatsJitterTable' 
Test Group Statistic table for jitter activity in a statistic cycle.
The statistic cycle is the value of hpnicfNqaCtlStatisticsInterval.
The first two index identify the pingCtlEntry that a probe statistics
result (HpnicfNqaStatisticsResultsEntry) belongs to.
hpnicfNqaGroupStatsJitterEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1
An entry contains the group statistic information for jitter activity.
This entry is created only if the pingCtlType is hpnicfNqajitter.
Indexes
Column Syntax OID
hpnicfNqaStatJitterIndex
An entry in this table is created when the statistic
result of a NQA probe in a statistic cycle is determined.

An implementation MUST start assigning hpnicfNqaStatJitterIndex
values at 1 and wrap after ex…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.1
hpnicfNqaStatJitterMinOfPosSD
The value of time that records the minimal positive jitter value
from source to destination in jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.2
hpnicfNqaStatJitterMaxOfPosSD
The value of time that records the maximal positive jitter value
from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.3
hpnicfNqaStatJitterNumOfPosSD
The total number of positive jitters from source to destination in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.4
hpnicfNqaStatJitterSumOfPosSD
The value of time that records the sum of positive jitter values
from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.5
hpnicfNqaStatJitterSumOfSquarePosSD
The value of time that records the sum of square of positive jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.6
hpnicfNqaStatJitterMinOfNegSD
The value of time that records the minimal absolute values of
negative jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.7
hpnicfNqaStatJitterMaxOfNegSD
The value of time that records the maximal absolute values of negative
jitter value from source to destination in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.8
hpnicfNqaStatJitterNumOfNegSD
The total number of negative jitters from source to destination in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.9
hpnicfNqaStatJitterSumOfNegSD
The value of time that records the sum of negative jitter values
from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.10
hpnicfNqaStatJitterSumOfSquareNegSD
The value of time that records the sum of square of negative jitter
values from source to destination in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.11
hpnicfNqaStatJitterMinOfPosDS
The value of time that records the minimal positive jitter value
from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.12
hpnicfNqaStatJitterMaxOfPosDS
The value of time that records the maximal positive jitter value
from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.13
hpnicfNqaStatJitterNumOfPosDS
The total number of positive jitters from destination to source in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.14
hpnicfNqaStatJitterSumOfPosDS
The value of time that records the sum of positive jitter values
from destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.15
hpnicfNqaStatJitterSumOfSquarePosDS
The value of time that records the sum of square of positive jitter
values destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.16
hpnicfNqaStatJitterMinOfNegDS
The value of time that records the minimal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.17
hpnicfNqaStatJitterMaxOfNegDS
The value of time that records the maximal absolute values of negative
jitter value from destination to source in the jitter test.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.18
hpnicfNqaStatJitterNumOfNegDS
The total number of negative jitters from destination to source in the
jitter test.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.19
hpnicfNqaStatJitterSumOfNegDS
The value of time that records the sum of negative jitter values
from destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.20
hpnicfNqaStatJitterSumOfSquareNegDS
The value of time that records the sum of square of negative jitter
values from destination to source in the jitter test.
millisecondsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.21
hpnicfNqaStatJitterPacketLossSD
The lost packets number sent from source to destination.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.22
hpnicfNqaStatJitterPacketLossDS
The lost packets number sent from destination to source.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.23
hpnicfNqaStatJitterAvePosSD
The value of time that records the average positive jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.24
hpnicfNqaStatJitterAveNegSD
The value of time that records the average negative jitter value
from source to destination.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.25
hpnicfNqaStatJitterAvePosDS
The value of time that records the average positive jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.26
hpnicfNqaStatJitterAveNegDS
The value of time that records the average negative jitter value
from destination to source.
millisecondsSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.27
hpnicfNqaStatJitterPktLossUnknown
The number of packets which is lost with unknown reason.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.28
hpnicfNqaStatJitterMaxOfICPIF
The maximum of all ICPIF values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.29
hpnicfNqaStatJitterMinOfICPIF
The minimum of all ICPIF values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.30
hpnicfNqaStatJitterMaxOfMOS
The maximum of all MOS values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.31
hpnicfNqaStatJitterMinOfMOS
The minimum of all MOS values in a statistic cycle for jitter test.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.12.1.32

hpnicfNqaReactionTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.13 · 1 row entry · 14 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaReactionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaReactionTable' 
A table of NQA test monitoring notification and
reaction configuration definitions.
          
An entry is removed from this table when its
corresponding pingCtlEntry is deleted.
hpnicfNqaReactionEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1
Defines an entry in the hpnicfNqaReactionTable. The first two index
elements identify the pingCtlEntry that a hpnicfNqaReactItemIndex
belongs to. The third index element selects a single reaction.
Indexes
Column Syntax OID
hpnicfNqaReactOwnerIndex
The first index of hpnicfNqaReactionTable, it is the same as
pingCtlOwnerIndex in pingCtlTable. hpnicfNqaReactOwnerIndex and
hpnicfNqaReactTestName identify an existed test.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.1
hpnicfNqaReactTestName
The second index of hpnicfNqaReactionTable, it is the same as
pingCtlTestName in pingCtlTable. hpnicfNqaReactOwnerIndex and
hpnicfNqaReactTestName identify an existed test.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.2
hpnicfNqaReactItemIndex
The third index of hpnicfNqaReactionTable, it definitely
identifies one of the reaction configurations for a test.
Unsigned32
Constraints:
range: 1-10
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.3
hpnicfNqaReactCheckedElement
A list of reaction condition type.
'probetime' and 'probefailure' are valid when pingCtlType of
the test is not hpnicfNqajitter.

'jitterOwdSD': one way time from source to destination in
ji…
Enumerationr/w
Enumerated Values:
1probetime
2probefailure
3jitterrtt
4jitterpacketloss
5jittersd
6jitterds
7icpif
8mos
9jitterOwdSD
10jitterOwdDS
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.4
hpnicfNqaReactThresholdUpperLimit
This object defines an administrative upper-threshold value for
hpnicfNqaReactCheckedElement.

The value of this object is zero if hpnicfNqaReactCheckedElement is
specified as 'jitterpacketloss' and 'probe…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.5
hpnicfNqaReactThresholdLowerLimit
This object defines an administrative lower-threshold value for
hpnicfNqaReactCheckedElement.

The value of hpnicfNqaReactThresholdLowerLimit should be equal or less
than the value of hpnicfNqaReactThresho…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.6
hpnicfNqaReactThresholdType
This object defines the reaction threshold types.

invalid(0): Invalid value.

average(1): If reaction threshold type is average and the average
value of watched opera…
Enumerationr/w
Enumerated Values:
0invalid
1average
2consecutive
3accumulative
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.7
hpnicfNqaReactThresholdConsecNum
This object defines a consecutive threshold limit.

The value is zero when hpnicfNqaReactThresholdType
is not 'consecutive'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.8
hpnicfNqaReactThresholdAccumNum
This object defines an accumulative threshold limit.

The value is zero when the hpnicfNqaReactThresholdType
is not 'accumulative'.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.9
hpnicfNqaReactActionType
Specifies the type of reaction to generate if the specified
violation type occurs for the monitored element:

none - No reaction is generated
trapOnly - A trap is generated
triggerO…
Enumerationr/w
Enumerated Values:
0none
1trapOnly
2triggerOnly
3trapAndTrigger
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.10
hpnicfNqaReactCurrentStatus
Specifies the current status of this reaction entry:

invalid - The status of the reaction entry is unknown.

overThreshold - The status of the reaction entry is overThreshold
…
Enumeration
Enumerated Values:
1invalid
2overThreshold
3belowThreshold
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.11
hpnicfNqaReactRowStatus
This object allows entries to be created and deleted
in the hpnicfNqaReactionTable.

Creation of an entry in this table results in a new set of reaction
configurations which take effect immediately.
…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.12
hpnicfNqaReactCheckedNum
The number of checked element samples that are monitored.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.13
hpnicfNqaReactThresholdNum
The number of checked element samples that are over threshold.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.13.1.14

hpnicfNqaStatisticsReactionTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.3.1.14 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfNqaStatisticsReactionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-NQA-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-NQA-MIB::hpnicfNqaStatisticsReactionTable' 
A table of NQA test monitoring notification and
reaction configuration definitions.
          
An entry is removed from this table when its
corresponding pingCtlEntry is deleted.
hpnicfNqaStatisticsReactionEntry row .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1
Defines an entry in the hpnicfNqaStatisticsReactionTable. The
first two index elements identify the pingCtlEntry that a
hpnicfNqaReactItemIndex belongs to. The third index element
identifies an entry in the hpnicfNqaSta…
Indexes
Column Syntax OID
hpnicfNqaStatReactOwnerIndex
The first index of hpnicfNqaStatisticsReactionTable, it is the same
as pingCtlOwnerIndex in pingCtlTable.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.1
hpnicfNqaStatReactTestName
The second index of hpnicfNqaStatisticsReactionTable, it is the same
as pingCtlTestName in pingCtlTable.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.2
hpnicfNqaStatReactIndex
The third index of hpnicfNqaStatisticsReactionTable. An entry in
this table is created when the statistics result of a NQA probe
is determined.

An implementation MUST start assigning hpnicfNqaStatResIndex…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.3
hpnicfNqaStatReactItemIndex
The forth index of hpnicfNqaStatisticsReactionTable, it definitely
identifies one of the reaction configurations for a test
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.4
hpnicfNqaStatReactCheckedNum
The number of checked element samples that are monitored.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.5
hpnicfNqaStatReactThresholdNum
The number of checked element samples that are over threshold.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.3.1.14.1.6