HPN-ICF-MPLS-LSR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
66

hpnicfmplsInterfaceConfTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfmplsInterfaceConfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfaceConfTable' 
This table specifies per-interface MPLS capability
and associated information.
hpnicfmplsInterfaceConfEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1
An entry in this table is created by an LSR for
every interface capable of supporting MPLS. The
entry with index 0 represents the per-platform label
space and contains parameters that apply to all
interfaces that partic…
Indexes
Column Syntax OID
hpnicfmplsInterfaceConfIndex
This is a unique index for an entry in the
hpnicfmplsInterfaceConfTable. A non-zero index for an
entry indicates the ifIndex for the corresponding
interface entry in of the MPLS-layer in the ifTable.
Note that the per-…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.1
hpnicfmplsInterfaceLabelMinIn
This is the minimum value of an MPLS label that this
LSR is willing to receive on this interface.
HpnicfMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.2
hpnicfmplsInterfaceLabelMaxIn
This is the maximum value of an MPLS label that this
LSR is willing to receive on this interface.
HpnicfMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.3
hpnicfmplsInterfaceLabelMinOut
This is the minimum value of an MPLS label that this
LSR is willing to send on this interface.
HpnicfMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.4
hpnicfmplsInterfaceLabelMaxOut
This is the maximum value of an MPLS label that this
LSR is willing to send on this interface.
HpnicfMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.5
hpnicfmplsInterfaceTotalBandwidth
This value indicates the total amount of usable
bandwidth on this interface and is specified in
kilobits per second (Kbps). This variable is
not applicable when applied to the interface with
index 0.
HpnicfMplsBitRate
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.6
hpnicfmplsInterfaceAvailableBandwidth
This value indicates the total amount of available
bandwidth available on this interface and is
specified in kilobits per second (Kbps). This
value is calculated as the difference between the
amount of bandwidth curren…
HpnicfMplsBitRate
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.7
hpnicfmplsInterfaceLabelParticipationType
Either the perPlatform(0) or perInterface(1) bit
MUST be set. If the value of the
hpnicfmplsInterfaceConfIndex for this entry is zero, then
only the perPlatform(0) bit MUST be set and the
perInterface(1) bit is meaningl…
Bits
Enumerated Values:
0perPlatform
1perInterface
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.8
hpnicfmplsInterfaceConfStorageType
The storage type for this entry.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.1.1.9

hpnicfmplsInterfacePerfTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfmplsInterfacePerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInterfacePerfTable' 
This table provides MPLS performance information on
a per-interface basis.
hpnicfmplsInterfacePerfEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1
An entry in this table is created by the LSR for
every interface capable of supporting MPLS. Its is
an extension to the hpnicfmplsInterfaceConfEntry table.
Indexes
No indexes recorded
Column Syntax OID
hpnicfmplsInterfaceInLabelsUsed
This object counts the number of labels
that are in use at this point in time on this
interface in the incoming direction. If the interface
participates in the per-platform label space only,
then this instance of this o…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.1
hpnicfmplsInterfaceFailedLabelLookup
This object counts the number of labeled packets
that have been received on this interface and were
discarded because there was no matching cross-connect
entry. This object MUST count on a per-interface basis
regardless…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.2
hpnicfmplsInterfaceOutLabelsUsed
This object counts the number of top-most labels in the
outgoing label stacks that are in use at this point
in time on this interface. This object
MUST count on a per-interface basis regardless of
which label space the …
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.3
hpnicfmplsInterfaceOutFragments
This object counts the number of outgoing MPLS
packets that required fragmentation before
transmission on this interface. This object
transmission on this interface. This object
MUST count on a per-interface basis regar…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.2.1.4

hpnicfmplsInSegmentTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfmplsInSegmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentTable' 
This table contains a collection of incoming
segments to an LSR.
hpnicfmplsInSegmentEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1
An entry in this table represents one incoming
segment. An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The creator of the entry is denoted by
hpnicfmplsInSegmentOwn…
Indexes
Column Syntax OID
hpnicfmplsInSegmentIfIndex
This is a unique index for an entry in the
hpnicfmplsInSegmentTable. This value represents the
interface index for the incoming MPLS interface. A
value of zero represents an incoming label from the
per-platform label …
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.1
hpnicfmplsInSegmentLabel
The incoming label for this segment.
HpnicfMplsLabel
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.2
hpnicfmplsInSegmentNPop
The number of labels to pop from the incoming
packet. Normally only the top label is popped from
the packet and used for all switching decisions for
that packet. Note that technologies which do not
support label poppi…
Integer32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.3
hpnicfmplsInSegmentAddrFamily
The IANA address family [IANAFamily] of the incoming
packet. A value of other(0) indicates that the
family type is either unknown or undefined.
IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbersr/w
Type Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6all802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164withNsap
16dns
17distinguishedName
18asNumber
19xtpOverIpv4
20xtpOverIpv6
21xtpNativeModeXTP
22fibreChannelWWPN
23fibreChannelWWNN
24gwid
25afi
26mplsTpSectionEndpointIdentifier
27mplsTpLspEndpointIdentifier
28mplsTpPseudowireEndpointIdentifier
29mtipmultitopologyipversion4
30mtipv6multitopologyipversion6
31bgpSfc
16384eigrpCommonServiceFamily
16385eigrpIpv4ServiceFamily
16386eigrpIpv6ServiceFamily
16387lispCanonicalAddressFormat
16388bgpLs
16389fortyeightBitMac
16390sixtyfourBitMac
16391oui
16392mac24
16393mac40
16394ipv664
16395rBridgePortID
16396trillNickname
16397universallyUniqueIdentifier
16398routingPolicyAfi
16399mplsNamespaces
65535reserved
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.4
hpnicfmplsInSegmentXCIndex
Index into hpnicfmplsXCTable which identifies which cross-
connect entry this segment is part of. A value of
zero indicates that this entry is not referred to by
any cross-connect entry. When a cross-connect entry
is …
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.5
hpnicfmplsInSegmentOwner
Denotes the entity that created and is responsible
for managing this segment.
HpnicfMplsObjectOwnerr/w
Type Values:
1other
2snmp
3ldp
4rsvp
5crldp
6policyAgent
7unknown
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.6
hpnicfmplsInSegmentTrafficParamPtr
This variable represents a pointer to the traffic
parameter specification for this in-segment. This
value may point at an entry in the
hpnicfmplsTrafficParamTable to indicate which
hpnicfmplsTrafficParamEntry is to be …
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.7
hpnicfmplsInSegmentRowStatus
This variable is used to create, modify, and/or
delete a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.8
hpnicfmplsInSegmentStorageType
This variable indicates the storage type for this
object.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.3.1.9

hpnicfmplsInSegmentPerfTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfmplsInSegmentPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-MPLS-LSR-MIB::hpnicfmplsInSegmentPerfTable' 
This table contains statistical information for
incoming MPLS segments to an LSR.
hpnicfmplsInSegmentPerfEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1
An entry in this table contains statistical
information about one incoming segment which was
configured in the hpnicfmplsInSegmentTable. The counters
in this entry should behave in a manner similar to
that of the interf…
Indexes
No indexes recorded
Column Syntax OID
hpnicfmplsInSegmentOctets
This value represents the total number of octets
received by this segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.1
hpnicfmplsInSegmentPackets
Total number of packets received by this segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.2
hpnicfmplsInSegmentErrors
The number of errored packets received on this
segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.3
hpnicfmplsInSegmentDiscards
The number of labeled packets received on this in-
segment, which were chosen to be discarded even
though no errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a labele…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.4
hpnicfmplsInSegmentHCOctets
The total number of octets received. This is the 64
bit version of hpnicfmplsInSegmentOctets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.5
hpnicfmplsInSegmentPerfDiscontinuityTime
The value of sysUpTime on the most recent occasion at
which any one or more of this segment's Counter32 or
Counter64 suffered a discontinuity. If no such
discontinuities have occurred since the last re-
initialization o…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.4.1.6

hpnicfmplsOutSegmentTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6 · 1 row entry · 12 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfmplsOutSegmentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentTable' 
This table contains a representation of the outgoing
segments from an LSR.
hpnicfmplsOutSegmentEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1
An entry in this table represents one outgoing
segment. An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The object hpnicfmplsOutSegmentOwner indicates
the creator of…
Indexes
Column Syntax OID
hpnicfmplsOutSegmentIndex
This value contains a unique index for this row.
While a value of 0 is not valid as an index for this
row it can be supplied as a valid value to index
hpnicfmplsXCTable to access entries for which no out-
segment has be…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.1
hpnicfmplsOutSegmentIfIndex
This value contains the interface index of the
outgoing interface.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.2
hpnicfmplsOutSegmentPushTopLabel
This value indicates whether or not a top label
should be pushed onto the outgoing packet's label
stack. The value of this variable must be set to
true if the outgoing interface does not support pop-
and-go (for exampl…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.3
hpnicfmplsOutSegmentTopLabel
If hpnicfmplsOutSegmentPushTopLabel is true then this
represents the label that should be pushed onto the
top of the outgoing packet's label stack.
HpnicfMplsLabelr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.4
hpnicfmplsOutSegmentNextHopIpAddrType
Indicates whether the next hop address is IPv4 or
IPv6. Note that a value of unknown (0) is valid
only when the outgoing interface is of type point-to-
point.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.5
hpnicfmplsOutSegmentNextHopIpv4Addr
IPv4 Address of the next hop. Its value is
significant only when
hpnicfmplsOutSegmentNextHopIpAddrType is ipV4 (1),
otherwise it should return a value of 0.
INET-ADDRESS-MIBInetAddressIPv4r/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.6
hpnicfmplsOutSegmentNextHopIpv6Addr
IPv6 address of the next hop. Its value is
significant only when
hpnicfmplsOutSegmentNextHopIpAddrType is ipV6 (2),
otherwise it should return a value of 0.
INET-ADDRESS-MIBInetAddressIPv6r/w
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.7
hpnicfmplsOutSegmentXCIndex
Index into hpnicfmplsXCTable which identifies which cross-
connect entry this segment is part of. A value of
zero indicates that this entry is not referred to by
any cross-connect entry. When a cross-connect entry
is …
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.8
hpnicfmplsOutSegmentOwner
Denotes the entity which created and is responsible
for managing this segment.
HpnicfMplsObjectOwnerr/w
Type Values:
1other
2snmp
3ldp
4rsvp
5crldp
6policyAgent
7unknown
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.9
hpnicfmplsOutSegmentTrafficParamPtr
This variable represents a pointer to the traffic
parameter specification for this out-segment. This
value may point at an entry in the
hpnicfmplsTrafficParamTable to indicate which
hpnicfmplsTrafficParamEntry is to be…
SNMPv2-TCRowPointerr/w
Description:
Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.10
hpnicfmplsOutSegmentRowStatus
For creating, modifying, and deleting this row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.11
hpnicfmplsOutSegmentStorageType
This variable indicates the storage type for this
object.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.6.1.12

hpnicfmplsOutSegmentPerfTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfmplsOutSegmentPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-MPLS-LSR-MIB::hpnicfmplsOutSegmentPerfTable' 
This table contains statistical information about
outgoing segments from an LSR. The counters in this
entry should behave in a manner similar to that of
the interface.
hpnicfmplsOutSegmentPerfEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1
An entry in this table contains statistical
information about one outgoing segment configured in
hpnicfmplsOutSegmentTable.
Indexes
No indexes recorded
Column Syntax OID
hpnicfmplsOutSegmentOctets
This value contains the total number of octets sent
on this segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.1
hpnicfmplsOutSegmentPackets
This value contains the total number of packets sent
on this segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.2
hpnicfmplsOutSegmentErrors
Number of packets that could not be sent due to
errors on this segment.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.3
hpnicfmplsOutSegmentDiscards
The number of labeled packets received on this out-
segment, which were chosen to be discarded even
though no errors had been detected to prevent their
being transmitted. One possible reason for
discarding such a label…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.4
hpnicfmplsOutSegmentHCOctets
Total number of octets sent. This is the 64 bit
version of hpnicfmplsOutSegmentOctets.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.5
hpnicfmplsOutSegmentPerfDiscontinuityTime
The value of sysUpTime on the most recent occasion at
which any one or more of this segment's Counter32 or
Counter64 suffered a discontinuity. If no such
discontinuities have occurred since the last re-
initialization o…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.7.1.6

hpnicfmplsXCTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfmplsXCTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-MPLS-LSR-MIB::hpnicfmplsXCTable' 
This table specifies information for switching
between LSP segments.  It supports point-to-point,
point-to-multipoint and multipoint-to-point
connections.  hpnicfmplsLabelStackTable specifies the
label stack information for a cross-connect LSR and
is referred to from hpnicfmplsXCTable.
hpnicfmplsXCEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1
A row in this table represents one cross-connect
entry. The following objects index it:

- cross-connect index hpnicfmplsXCIndex that uniquely
identifies a group of cross-connect entries
- interface index…
Indexes
Column Syntax OID
hpnicfmplsXCIndex
Primary index for the conceptual row identifying
a group of cross-connect segments.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.1
hpnicfmplsXCLspId
This value identifies the label switched path that
this cross-connect entry belongs to.
HpnicfMplsLSPIDr/w
Type Constraints:
range: 0..31
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.2
hpnicfmplsXCLabelStackIndex
Primary index into hpnicfmplsLabelStackTable identifying a
stack of labels to be pushed beneath the top label.
Note that the top label identified by the out-
segment ensures that all the components of a
multipoint-to-po…
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.3
hpnicfmplsXCIsPersistent
Denotes whether or not this cross-connect entry and
associated in- and out-segments should be restored
automatically after failures. This value MUST be
set to false in cases where this cross-connect entry
was created b…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.4
hpnicfmplsXCOwner
Denotes the entity that created and is responsible
for managing this cross-connect.
HpnicfMplsObjectOwnerr/w
Type Values:
1other
2snmp
3ldp
4rsvp
5crldp
6policyAgent
7unknown
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.5
hpnicfmplsXCRowStatus
For creating, modifying, and deleting this row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.6
hpnicfmplsXCStorageType
Defines the storage type for this object.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.7
hpnicfmplsXCAdminStatus
The desired operational status of this segment.
Enumerationr/w
Enumerated Values:
1up
2down
3testing
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.8
hpnicfmplsXCOperStatus
The actual operational status of this cross-
connect.
Enumeration
Enumerated Values:
1up
2down
3testing
4unknown
5dormant
6notPresent
7lowerLayerDown
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.9.1.9

hpnicfmplsLabelStackTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfmplsLabelStackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-MPLS-LSR-MIB::hpnicfmplsLabelStackTable' 
This table specifies the label stack to be pushed
onto a packet, beneath the top label.  Entries into
this table are referred to from hpnicfmplsXCTable.
hpnicfmplsLabelStackEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1
An entry in this table represents one label which is
to be pushed onto an outgoing packet, beneath the
top label. An entry can be created by a network
administrator or by an SNMP agent as instructed by
an MPLS signalin…
Indexes
Column Syntax OID
hpnicfmplsLabelStackIndex
Primary index for this row identifying a stack of
labels to be pushed on an outgoing packet, beneath
the top label.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.1
hpnicfmplsLabelStackLabelIndex
Secondary index for this row identifying one label
of the stack. Note that an entry with a smaller
hpnicfmplsLabelStackLabelIndex would refer to a label
higher up the label stack and would be popped at a
downstream LSR…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.2
hpnicfmplsLabelStackLabel
The label to pushed.
HpnicfMplsLabelr/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.3
hpnicfmplsLabelStackRowStatus
For creating, modifying, and deleting this row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.4
hpnicfmplsLabelStackStorageType
Defines the storage type for this object.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.12.1.5

hpnicfmplsTrafficParamTable

table
.1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfmplsTrafficParamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-MPLS-LSR-MIB::hpnicfmplsTrafficParamTable' 
This table specifies the Traffic Parameter objects
for in and out-segments.
hpnicfmplsTrafficParamEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1
An entry in this table represents the TrafficParam
objects for one or more in or out segments. A
single entry can be pointed to by multiple segments
indicating resource sharing.
Indexes
Column Syntax OID
hpnicfmplsTrafficParamIndex
Uniquely identifies this row of the table. Note
that zero represents an invalid index.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.1
hpnicfmplsTrafficParamMaxRate
Maximum rate in kilobits/second.
kilobits per secondHpnicfMplsBitRater/w
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.2
hpnicfmplsTrafficParamMeanRate
Mean rate in kilobits/second.
kilobits per secondHpnicfMplsBitRater/w
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.3
hpnicfmplsTrafficParamMaxBurstSize
Maximum burst size in bytes.
bytesHpnicfMplsBurstSizer/w
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.4
hpnicfmplsTrafficParamRowStatus
For creating, modifying, and deleting this row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.5
hpnicfmplsTrafficParamStorageType
The storage type for this object.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.11.2.14.11.15.8.12.1.1.14.1.6