HPN-ICF-MPLS-LDP-MIB Table View

MPLS provides support for multiple incarnations of the 
MPLS Stack in a target. The LSR defined in the standard <IETF
DRAFT> MIB is treated as an incarnation in this MIB. Using a
local policy the Network administrator must group the LDP Entities
that should be placed in an incarnation.

hpnicfMplsLdpLsrIncarnEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1

An entry in this table represents an LSR incarnation.
All the entries in this table are created initially when the
LDP is initiated. The row status of each entry will be in
'notInService' state initially. The row stat…

Indexes

hpnicfMplsLdpLsrIncarnID

Column	Syntax	OID
hpnicfMplsLdpLsrID The LSR's Identifier.	MplsLsrIdentifierr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.1
hpnicfMplsLdpLsrLoopDetectionPresent A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.2
hpnicfMplsLdpLsrLoopDetectionAdminStatus To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.3
hpnicfMplsLdpLsrPathVectorLimit This object only has meaning if hpnicfMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.4
hpnicfMplsLdpLsrHopCountLimit This object only has meaning if hpnicfMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as i…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.5
hpnicfMplsLdpLsrLoopPreventionPresent A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. C…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.6
hpnicfMplsLdpLsrLoopPreventionAdminStatus To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of MPLS does not provide support to a…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.7
hpnicfMplsLdpLsrLabelRetentionMode The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used…	Enumerationr/w Enumerated Values: 1 conservative 2 liberal	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.8
hpnicfMplsLdpLsrIncarnID The incarnation acts as index to all the elements in this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.9
hpnicfMplsLdpLsrMaxLdpEntities The maximum number of LDP entities that can be supported by this Incarnation.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.10
hpnicfMplsLdpLsrMaxLocalPeers The maximum number of Local LDP peers that can be supported by this Incarnation.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.11
hpnicfMplsLdpLsrMaxRemotePeers The maximum number of Remote LDP peers that can be supported by this Incarnation.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.12
hpnicfMplsLdpLsrMaxIfaces The maximum number of Label enabled Interfaces that can be supported by this Incarnation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.13
hpnicfMplsLdpLsrMaxLsps The maximum number of Label Switched Paths that can be supported by this Incarnation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.14
hpnicfMplsLdpLsrMaxCrlspTnls The maximum number of CRLSPs that can be supported by this Incarnation.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.15
hpnicfMplsLdpLsrMaxErhopPerCrlspTnl The maximum number of ER-Hops that can be supported in a CRLSP tunnel.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.16
hpnicfMplsLdpLsrRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.17
hpnicfMplsLdpLsrMaxVcmCapability	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.18
hpnicfMplsLdpLsrVcmPathVecInAllLblMapPresent	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.19
hpnicfMplsLdpLsrRequestRetrytimerValue	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.20
hpnicfMplsLdpLsrNumOfRequestRetryAttempts	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.1.1.1.21

This table contains information about the
MPLS Label Distribution Protocol Entities which
exist on this Label Switch Router (LSR).

hpnicfMplsLdpEntityEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1

An entry in this table represents an LDP entity.
An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

An LPD Entity is uniquely indexed by its LPD
Identifier.

Indexes

hpnicfMplsLdpLsrIncarnID hpnicfMplsLdpEntityIfIndex

Column	Syntax	OID
hpnicfMplsLdpEntityID The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address as…	MplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.1
hpnicfMplsLdpEntityLabelSpaceType The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type…	Enumerationr/w Enumerated Values: 1 unknown 2 perInterface 3 perPlatform	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.2
hpnicfMplsLdpEntityDefVpi The Default VPI value used in the label for the default VPI.	AtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.3
hpnicfMplsLdpEntityDefVci The Default VCI value used in the label for the default VCI.	AtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.4
hpnicfMplsLdpEntityUnlabTrafVpi VPI value of the VCC supporting unlabeled traffic.	AtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.5
hpnicfMplsLdpEntityUnlabTrafVci VCI value of the VCC supporting unlabeled traffic.	AtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.6
hpnicfMplsLdpEntityMergeCapability Sets the merge capability for this LDP entity. Current Release of MPLS does not provide support for any kind of Merge.	Enumerationr/w Enumerated Values: 0 noMerge 1 vpMerge 2 vcMerge 3 vpVcMerge	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.7
hpnicfMplsLdpEntityVcDirectionality Sets the VC directionality for this LDP entity.	Enumerationr/w Enumerated Values: 1 bidirectional 2 unidirectional	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.8
hpnicfMplsLdpEntityWellKnownDiscoveryPort The well known LDP Discovery Port.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.9
hpnicfMplsLdpEntityMtu The maximum transmission unit (MTU) that was configured for this entity.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.10
hpnicfMplsLdpEntityKeepAliveHoldTimer The two octet value which is the proposed keep alive hold timer for this LDP Entity.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.11
hpnicfMplsLdpEntityFailedInitSessionThreshold When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.12
hpnicfMplsLdpEntityLabelDistributionMethod For any given LDP session, the method of label distribution must be specified. Current release of MPLS does not provide support for 'downstreamUnsolicited'.	Enumerationr/w Enumerated Values: 1 downstreamOnDemand 2 downstreamUnsolicited	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.13
hpnicfMplsLdpEntityLabelAllocationMethod For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode.	Enumerationr/w Enumerated Values: 1 ordered 2 independent	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.14
hpnicfMplsLdpEntityHelloHoldTimer The two octet value which is the proposed hello hold timer for this LDP Entity.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.15
hpnicfMplsLdpEntityRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.1.1.16

This table contains information about the
interfaces that are associated with an LDP Entity.
There should be atleast one interface associated with
each LDP Entity. If the LDP Entity supports 'per interface
based label space' label type then, atmost one interface can be 
associated with the LDP entity. If the LDP Entity supports
'per platform based label space' label type then, more than one
interface can be associated with the LDP Entity.

hpnicfMplsLdpEntityIfEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1

An entry in this table represents an Interface that is
associated with a LDP entity.

An entry can be created by a network administrator
or by an SNMP agent as instructed by LDP.

An interface (r…

Indexes

hpnicfMplsLdpLsrIncarnID hpnicfMplsLdpEntityIfIndex

Column	Syntax	OID
hpnicfMplsLdpEntityIfIndex Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1.1
hpnicfMplsLdpEntityIfIpv4Address The IPv4 address associated with the interface.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1.2
hpnicfMplsLdpEntityIfRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.2.1.3

The MPLS LDP Entity Configurable ATM Label Range Table.
The purpose of this table is to provide a mechanism
for specifying a contiguous range of vpi's
with a contiguous range of vci's, or a 'label range'
for LDP Entities.
          
LDP Entities which use ATM must have at least one
entry in this table.

hpnicfMplsLdpEntityConfAtmLabelRangeEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1

A row in the LDP Entity Configurable ATM Label
Range Table. One entry in this table contains
information on a single range of labels
represented by the configured Upper and Lower
Bounds VPI/VCI pairs.
NOTE: The ranges…

Indexes

hpnicfMplsLdpLsrIncarnID hpnicfMplsLdpEntityIfIndex hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVPI hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVCI

Column	Syntax	OID
hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVPI The minimum VPI number configured for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.1
hpnicfMplsLdpEntityConfAtmLabelRangeLowerBoundVCI The minimum VCI number configured for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.2
hpnicfMplsLdpEntityConfAtmLabelRangeUpperBoundVPI The maximum VPI number configured for this range.	AtmVpIdentifierr/w Type Constraints: range: 0..4095	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.3
hpnicfMplsLdpEntityConfAtmLabelRangeUpperBoundVCI The maximum VCI number configured for this range.	AtmVcIdentifierr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.4
hpnicfMplsLdpEntityConfAtmLabelRangeRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.3.1.5

This table is a read-only table which augments
the MplsLdpConfEntityTable.  The purpose of this
table is to keep statistical information about
the LDP Entities on the LSR.

hpnicfMplsLdpEntityStatsEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.4.1

A row in this table contains statistical information
about an LDP Entity.

Indexes

No indexes recorded

Column	Syntax	OID
hpnicfMplsLdpAttemptedSessions A count of the total attempted sessions for this LDP Entity.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.2.4.1.1

Information about LDP peers which have been discovered
by the LDP Entities that are managed by this agent.

hpnicfMplsLdpPeerEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1

Information about a single Peer.

Indexes

hpnicfMplsLdpLsrIncarnID hpnicfMplsLdpEntityIfIndex hpnicfMplsLdpPeerIndex

Column	Syntax	OID
hpnicfMplsLdpPeerIndex An identifier for the LDP peer that is unique within the scope of this agent.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.1
hpnicfMplsLdpPeerID The LDP identifier of this LDP Peer.	MplsLdpIdentifierr/w Type Constraints: range: 6	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.2
hpnicfMplsLdpPeerInternetworkAddrType The type of the internetwork layer address of this LDP peer. This object indicates how the value of hpnicfMplsLdpPeerInternetworkAddr is to be interpreted.	AddressFamilyNumbersr/w Type Values: 0 other 1 ipv4 2 ipv6 3 nsap 4 hdlc 5 bbn1822 6 ieee802 7 e163 8 e164 9 f69 10 x121 11 ipx 12 appleTalk 13 decnetIV 14 banyanVines 15 e164WithNsap	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.3
hpnicfMplsLdpPeerInternetworkAddr The value of the internetwork layer address of this LDP peer.	MplsLdpGenAddrr/w Type Constraints: range: 0..64	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.4
hpnicfMplsLdpPeerDefaultMtu The default maximum transmission unit (MTU) of the LDP Peer.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.5
hpnicfMplsLdpPeerKeepAliveHoldTimer The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval.	secondsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.6
hpnicfMplsLdpPeerLabelDistributionMethod For any given LDP session, the method of label distribution must be specified.	Enumerationr/w Enumerated Values: 1 downstreamOnDemand 2 downstreamUnsolicited	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.7
hpnicfMplsLdpPeerType Indicates whether a peer is a local peer or a remote peer	Enumerationr/w Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.8
hpnicfMplsLdpPeerRowStatus An object that allows entries in this table to be created and deleted using the RowStatus convention.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.1.1.9

The MPLS LDP Peer Configurable ATM Label Range Table.
The purpose of this table is to provide a mechanism
for specifying a contiguous range of vpi's with a contiguous
range of vci's, or a 'label range' for LDP Peers.
LDP Peers which use ATM must have at least one
entry in this table.

hpnicfMplsLdpPeerConfAtmLabelRangeEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1

A row in the LDP Peer Configurable ATM Label Range Table.
One entry in this table contains information
on a single range of labels represented by
the configured Upper and Lower Bounds VPI/VCI pairs.

NOTE: …

Indexes

hpnicfMplsLdpLsrIncarnID hpnicfMplsLdpEntityIfIndex hpnicfMplsLdpPeerIndex hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVPI hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVCI

Column	Syntax	OID
hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVPI The minimum VPI number configured for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.1
hpnicfMplsLdpPeerConfAtmLabelRangeLowerBoundVCI The minimum VCI number configured for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.2
hpnicfMplsLdpPeerConfAtmLabelRangeUpperBoundVPI The maximum VPI number configured for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.3
hpnicfMplsLdpPeerConfAtmLabelRangeUpperBoundVCI The maximum VCI number configured for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.3.2.1.4

A table of Sessions between the LDP Entities and
LDP Peers.

hpnicfMplsLdpSessionEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1

An entry in this table represents information on a
single session between an LDP Entity and LDP Peer.

Indexes

hpnicfMplsLdpLsrIncarnID hpnicfMplsLdpEntityIfIndex hpnicfMplsLdpPeerIndex hpnicfMplsLdpSessionIndex

Column	Syntax	OID
hpnicfMplsLdpSessionIndex An unique identifier for this entry such that it identifies a specific LDP Session.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.1
hpnicfMplsLdpSessionID The LDP Session identifier.	MplsLdpIdentifier Type Constraints: range: 6	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.2
hpnicfMplsLdpSessionProtocolVersion The version of the LDP Protocol which this session is using.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.3
hpnicfMplsLdpSessionKeepAliveHoldTimeRemaining The keep alive hold time remaining for this session.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.4
hpnicfMplsLdpSessionRole An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role.	Enumeration Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.5
hpnicfMplsLdpSessionState The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior.	Enumeration Enumerated Values: 1 nonexistent 2 initialized 3 openrec 4 opensent 5 operational	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.6
hpnicfMplsLdpSessionAtmLabelRangeLowerBoundVPI The minimum VPI number for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.7
hpnicfMplsLdpSessionAtmLabelRangeLowerBoundVCI The minimum VCI number for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.8
hpnicfMplsLdpSessionAtmLabelRangeUpperBoundVPI The maximum VPI number for this range.	AtmVpIdentifier Type Constraints: range: 0..4095	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.9
hpnicfMplsLdpSessionAtmLabelRangeUpperBoundVCI The maximum VCI number for this range.	AtmVcIdentifier Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.4.1.1.10

A table of Hello Adjacencies for Sessions.

hpnicfMplsLdpHelloAdjacencyEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1.1

Each row represents a single LDP Hello Adjacency.
An LDP Session can have one or more Hello adjacencies.

Indexes

hpnicfMplsLdpLsrIncarnID hpnicfMplsLdpEntityIfIndex hpnicfMplsLdpPeerIndex hpnicfMplsLdpSessionIndex hpnicfMplsLdpHelloAdjacencyIndex

Column	Syntax	OID
hpnicfMplsLdpHelloAdjacencyIndex An identifier for the adjacency.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1.1.1
hpnicfMplsLdpHelloAdjacencyHoldTimeRemaining The time remaining for this Hello Adjacency.	SNMPv2-TCTimeInterval Type Constraints: range: 0..2147483647 Description: A period of time, measured in units of 0.01 seconds.	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.5.1.1.2

The hpnicfMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels
to be created. The ER hops associated with a CRLSP tunnel
are to be configured using the hpnicfMplsLdpCrlspErHopTable.

hpnicfMplsLdpCrlspTnlEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1

An entry in this table represents an CRLSP MPLS tunnel.
An entry can be created by a network administrator.

Indexes

hpnicfMplsLdpLsrIncarnID hpnicfMplsLdpCrlspTnlIndex

Column	Syntax	OID
hpnicfMplsLdpCrlspTnlIndex Uniquely identifies this row.	MplsTunnelIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.1
hpnicfMplsLdpCrlspTnlName The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port.	DisplayStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.2
hpnicfMplsLdpCrlspTnlDirection Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional.	Enumerationr/w Enumerated Values: 1 in 2 out 3 inOut	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.3
hpnicfMplsLdpCrlspTnlSignallingProto The signaling protocol, if any, that set up this tunnel.	Enumerationr/w Enumerated Values: 1 none 2 ldp 3 rsvp	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.4
hpnicfMplsLdpCrlspTnlSetupPrio The setup priority of this tunnel.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.5
hpnicfMplsLdpCrlspTnlHoldingPrio The holding priority for this tunnel.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.6
hpnicfMplsLdpCrlspTnlPeakDataRate The peak rate - the maximum rate at which traffic will be sent on the CRLSP.	bits per secondBitRater/w	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.7
hpnicfMplsLdpCrlspTnlPeakBurstSize The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP.	bytesBurstSizer/w	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.8
hpnicfMplsLdpCrlspTnlCommittedDataRate The committed rate - the committed rate at which traffic will be sent on the CRLSP.	bits per secondBitRater/w	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.9
hpnicfMplsLdpCrlspTnlCommittedBurstSize The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP.	bytesBurstSizer/w	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.10
hpnicfMplsLdpCrlspTnlExcessBurstSize The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP.	bytesBurstSizer/w	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.11
hpnicfMplsLdpCrlspTnlIsPinned Indicates whether the loose-routed hops of this tunnel are to be pinned.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.12
hpnicfMplsLdpCrlspTnlFrequency Indicates the frequency of usage of the established CRLSP.	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.13
hpnicfMplsLdpCrlspTnlWeight Indicates the weight that is the established CRLSP.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.14
hpnicfMplsLdpCrlspTnlRowStatus For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hpnicfMplsLdpErHopTable, associated with this tunnel.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.1.1.15

The hpnicfMplsLdpCrlspErHopTable is used to indicate the hops,
strict  or  loose,  for an MPLS  CRLSP tunnel  defined  in
hpnicfMplsLdpCrlspTnlTable. 
          
There must be atleast one entry in this table for each CRLSP tunnel 
that is supported in the hpnicfMplsLdpCrlspTnlTable.
          
The first row in the table  is  the
first hop after the origination point of the tunnel.

hpnicfMplsLdpCrlspErHopEntry row .1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1

An entry in this table represents a tunnel hop. An
entry is created by a network administrator for
signalled ERLSP set up by LDP or RSVP.

Indexes

hpnicfMplsLdpLsrIncarnID hpnicfMplsLdpCrlspTnlIndex hpnicfMplsLdpCrlspErHopIndex

Column	Syntax	OID
hpnicfMplsLdpCrlspErHopIndex Secondary index into this table identifying the particular hop.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.1
hpnicfMplsLdpCrlspErHopAddrType Address type of this hop.	Enumerationr/w Enumerated Values: 1 ipV4	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.2
hpnicfMplsLdpCrlspErHopIpv4Addr If hpnicfMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.3
hpnicfMplsLdpCrlspErHopIpv4PrefixLen If hpnicfMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0.	Integer32r/w Constraints: range: 1-32	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.4
hpnicfMplsLdpCrlspErHopStrictOrLoose Whether this is a strict or loose hop.	Enumerationr/w Enumerated Values: 1 strict 2 loose	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.5
hpnicfMplsLdpCrlspErHopRowStatus For creating, modifying and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.8.12.2.1.6.2.1.6