HPN-ICF-LswTRAP-MIB

        
    
Source file
HPN-ICF-LswTRAP-MIB
Last revised
Identity
hpnicfLswTrapMib
Base OID
1.3.6.1.4.1.11.2.14.11.15.8.35.12
Net-SNMP examples using the hp MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HPN-ICF-LswTRAP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HPN-ICF-LswTRAP-MIB::hpnicfLswTrapMib'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-LswTRAP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-LswTRAP-MIB::hpnicfLswTrapMib'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (4)
.1.3.6.1.4.1.11.2.14.11.15.8.35.12
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.98
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.99
Dependencies (7) 4 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Notifications / Traps (28)
NameOIDDescription
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.1
Power supply failure
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.10
Board failed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.11
Board normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.12
Sub card removed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.13
Sub card inserted
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.14
Board temperature low
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.15
Board temperature form lower to normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.16
Board temperature high
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.17
Board temperature from higher to normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.18
Board request load
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.19
Board load failure
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.2
Power supply normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.20
Board load finished
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.21
Back board mode set failure
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.22
Back board mode set OK
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.23
Power inserted
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.24
This trap node indicates that the boot image of specified board
is updated.
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.25
Node removed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.26
Node failed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.27
Node normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.28
Power module is incompatible with the device
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.3
Master power supply normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.4
Slave power supply normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.5
Power removed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.6
Fan failure
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.7
Fan normal
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.8
Board removed
.1.3.6.1.4.1.11.2.14.11.15.8.35.12.1.9
Board inserted