HPN-ICF-LI-MIB Table View

This table describes interception gateway information with which
interception device communicates.

hpnicfLIMediationEntry row .1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1

An entry of configuring mediation device.

Indexes

hpnicfLIMediationIndex

Column	Syntax	OID
hpnicfLIMediationIndex hpnicfLIMediationIndex is a entry identifier. The Mediation Device should be responsible for making sure these are unique. Before creating a new entry, a value for this variable may be obtained by reading hpnicfLINewIn…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.1
hpnicfLIMediationDestAddrType The type of hpnicfLIMediationDestAddr.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.2
hpnicfLIMediationDestAddr The IP Address of the Mediation Device to receive intercepted traffic.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.3
hpnicfLIMediationDestPort The L4-port number on the Mediation Device to receive intercepted traffic.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.4
hpnicfLIMediationSrcInterface The interface on the intercepting device from which to transmit intercepted data. If zero, intercepting device will select an outbound interface according to hpnicfLIMediationDestAddr.	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.5
hpnicfLIMediationDscp The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.6
hpnicfLIMediationTimeOut The time at which this row and all related Stream Table rows should be automatically removed, and the intercept function expire.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.7
hpnicfLIMediationTransport The protocol used in transferring intercepted data to the Mediation Device.	Enumerationr/w Enumerated Values: 1 udp	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.8
hpnicfLIMediationNotificationEnable This variable controls the generation of any notifications or informs by the MIB agent for this table entry.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.9
hpnicfLIMediationRowStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.2.1.10

This table lists the traffic stream's type to be intercepted.
The specified filter is defined in hpnicfLIIPStreamTable,
hpnicfLIMACStreamTable or hpnicfLIUserStreamTable, according to
hpnicfLIStreamtype.  Also it contains counters for packets to
be intercepted and dropped by attached type of filter.

hpnicfLIStreamEntry row .1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1

A single type of data stream to be intercepted.

Indexes

hpnicfLIMediationIndex hpnicfLIStreamIndex

Column	Syntax	OID
hpnicfLIStreamIndex The index of the stream entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.1
hpnicfLIStreamtype Identifies the type of stream, and according to it uses filter table. It can not be changed after a filter table is attached to it. The following types of streams are supported: ip: IP filter. The exact de…	Enumerationr/w Enumerated Values: 1 ip 2 mac 3 userConnection	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.2
hpnicfLIStreamEnable If 'true', the interception is active. And it is set to 'true' only after an additional filter specification has been attached to this stream.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.3
hpnicfLIStreamPackets The numbers of packets that have been intercepted.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.4
hpnicfLIStreamDrops The numbers of packets were dropped in the lawful intercept process.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.5
hpnicfLIStreamHPackets The numbers of packets have been intercepted. This object is a 64-bit version of hpnicfLIStreamPackets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.6
hpnicfLIStreamHDrops The numbers of packets were dropped in the lawful intercept process. This object is a 64-bit version of hpnicfLIStreamDrops.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.7
hpnicfLIStreamRowStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.111.1.3.3.1.8

This table lists the IPv4 and IPv6 streams to be intercepted.
It is associated with hpnicfLIMediationTable and hpnicfLIStreamTable.

hpnicfLIIPStreamEntry row .1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1

A single stream to be intercepted.
The first index indicates the Mediation Device.
The second index is that of the stream's counter entry
in the hpnicfLIStreamTable. The second index permits multiple
classifiers to be …

Indexes

hpnicfLIMediationIndex hpnicfLIStreamIndex

Column	Syntax	OID
hpnicfLIIPStreamInterface Traffic received or transmitted over this interface will be intercepted. This value must be set when creating a stream entry, either zero, or a valid interface index. If the value is zero, …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.1
hpnicfLIIPStreamAddrType The type of address, used in packet selection.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.2
hpnicfLIIPStreamDestAddr The Destination address used in packet selection. This address will be consistent with the type specified in hpnicfLIIPStreamAddrType.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.3
hpnicfLIIPStreamDestAddrLength The length of the Destination Prefix. A value of zero means all addresses to match. This prefix length will be consistent with the type specified in hpnicfLIIPStreamAddrType.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.4
hpnicfLIIPStreamSrcAddr The Source Address used in packet selection. This address will be consistent with the type specified in hpnicfLIIPStreamAddrType.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.5
hpnicfLIIPStreamSrcAddrLength The length of the Source Prefix. A value of zero means all addresses to match. This prefix length will be consistent with the type specified in hpnicfLIIPStreamAddrType.	INET-ADDRESS-MIBInetAddressPrefixLengthr/w Type Constraints: range: 0..2040	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.6
hpnicfLIIPStreamTosByte The value of the TOS byte. If hpnicfLIIPStreamTosByte&(~hpnicfLIIPStreamTosByteMask)!=0, configuration is rejected.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.7
hpnicfLIIPStreamTosByteMask This value is ANDed with the value of the TOS byte in a packet and compared with hpnicfLIIPStreamTosByte. If the values are equal, the comparison is equal. If both the mask and the TosByte value are zero, the result is…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.8
hpnicfLIIPStreamFlowId The flow identifier in an IPv6 header. -1 indicates that the Flow Id is unused.	Integer32r/w Constraints: range: -1-1048575	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.9
hpnicfLIIPStreamProtocol The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.10
hpnicfLIIPStreamDestL4PortMin The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specified for this entry in hpnicfLIIPStreamDestL4PortMax. …	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.11
hpnicfLIIPStreamDestL4PortMax The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in hpnicfLIIPStr…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.12
hpnicfLIIPStreamSrcL4PortMin The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specified for this entry in hpnicfLIIPStreamSrcL4PortMax. If both…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.13
hpnicfLIIPStreamSrcL4PortMax The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in hpnicfLIIPStr…	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.14
hpnicfLIIPStreamVRF It is the name of a Virtual Routing and Forwarding (VRF) of a VPN.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.15
hpnicfLIIPStreamRowStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.111.2.1.1.1.18

This table lists the IEEE 802 streams to be intercepted.
It is associated with hpnicfLIMediationTable and hpnicfLIStreamTable.

hpnicfLIMACStreamEntry row .1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1

A single stream to be intercepted.
The first index indicates the Mediation Device.
The second index is that of the stream's counter entry
in the hpnicfLIStreamTable. The second index permits multiple
classifiers to be …

Indexes

hpnicfLIMediationIndex hpnicfLIStreamIndex

Column	Syntax	OID
hpnicfLIMACStreamFields This object displays what attributes will be compared to identify traffic. interface: indicates that traffic on the stated interface is to be intercepted dstMacAddress: indicates that traffic …	Bitsr/w Enumerated Values: 0 interface 1 dstMacAddress 2 srcMacAddress 3 ethernetPid 4 dSap 5 sSap	.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.1
hpnicfLIMACStreamInterface Traffic received or transmitted over this interface will be intercepted. This value must be set when creating a stream entry, either zero, or a valid interface index. If the value is zero, interception accepts any inter…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.2
hpnicfLIMACStreamDestAddr The Destination address used in packet selection.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.3
hpnicfLIMACStreamSrcAddr The Source Address used in packet selection.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.4
hpnicfLIMACStreamEthPid The value of the Ethernet Protocol Identifier in the Ethernet traffic or IEEE 802.2 SNAP traffic.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.5
hpnicfLIMACStreamDSap The value of the IEEE 802.2 Destination SAP.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.6
hpnicfLIMACStreamSSap The value of the IEEE 802.2 Source SAP.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.7
hpnicfLIMACStreamRowStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.111.3.1.1.1.8

This table lists the user connection streams to be intercepted.
It is associated with hpnicfLIMediationTable and hpnicfLIStreamTable.

hpnicfLIUserStreamEntry row .1.3.6.1.4.1.11.2.14.11.15.2.111.4.1.1.1

A single stream to be intercepted.
The first index indicates the Mediation Device.
The second index is that of the stream's counter entry
in the hpnicfLIStreamTable. This permits multiple classifiers
to be used togethe…

Indexes

hpnicfLIMediationIndex hpnicfLIStreamIndex

Column	Syntax	OID
hpnicfLIUserStreamAcctSessID This is the RADIUS attribute 44 acct-session-ID. The string must be set, and the length not be zero.	OctetStringr/w Constraints: range: 0-253	.1.3.6.1.4.1.11.2.14.11.15.2.111.4.1.1.1.1
hpnicfLIUserStreamRowStatus Operation status of this table entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.111.4.1.1.1.2