HPN-ICF-EVI-MIB Table View

A table that contains extended VLAN entries.  A site
extends extended VLANs to remote sites over an EVI tunnel.

hpnicfEviIfExtendVlanEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1

Detailed information about each extended VLAN.

Indexes

IF-MIBifIndex hpnicfEviIfExtendVlanIndex

Column	Syntax	OID
hpnicfEviIfExtendVlanIndex Each VLAN index specifies a VLAN ID in the range of 1 to 4094.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1.1
hpnicfEviIfExtendVlanLAV Local Active VLANs (LAVs), which are active VLANs on the EVI tunnel interface. The interface can extend only active VLANs to remote sites.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1.2
hpnicfEviIfExtendVlanRowStatus Entry status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1.3

VLAN mapping table on the interface.

hpnicfEviIfVlanMappingEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1

Detailed information about each VLAN mapping.

Indexes

IF-MIBifIndex hpnicfEviIfVlanMappingSiteId hpnicfEviIfVlanMappingSrc hpnicfEviIfVlanMappingDst

Column	Syntax	OID
hpnicfEviIfVlanMappingSiteId Site ID of the interface on which the VLAN mapping is configured. If '0' is specified, the operation applies to all sites.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.1
hpnicfEviIfVlanMappingSrc Local VLAN ID in the mapping.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.2
hpnicfEviIfVlanMappingDst Remote VLAN ID in the mapping.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.3
hpnicfEviIfVlanMappingRowStatus Entry status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.4

A table that contains EVI tunnel attribute entries.

hpnicfEviIfAttributeEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3.1

Detailed information about the attributes of each EVI tunnel.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfEviIfFloodingMode State of the EVI flooding function. The function is enabled if the value is set to true.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3.1.1
hpnicfEviIfARPSuppression State of the ARP flooding suppression function. The function is enabled if the value is set to true.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3.1.2

A table that contains MAC addresses configured
for selective flooding.

hpnicfEviIfFloodingMacEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1

Detailed information about each MAC address
used for EVI selective flooding.

Indexes

IF-MIBifIndex hpnicfEviIfFloodingMacAddress hpnicfEviIfFloodMacVlanIndex

Column	Syntax	OID
hpnicfEviIfFloodingMacAddress MAC address used for EVI selective flooding.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1.1
hpnicfEviIfFloodMacVlanIndex The VLAN that contains the MAC address.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1.2
hpnicfEviIfFloodingMacRowStatus State of the MAC address entry. You can use this object to create or delete entries. Deleting entries does not delete this object.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1.3

EVI MAC statistics table.  The table contains MAC entry
counts sorted by MAC address types, including local MACs, local
MAC conflicts, remote MACs, and remote MAC conflicts.

hpnicfEviMacCountEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1

EVI MAC entry counts.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfEviMacLocalMacs Number of local MACs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.1
hpnicfEviMacLocalConflicts Number of local MACs that conflict with remote MACs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.2
hpnicfEviMacRemoteMacs Number of remote MACs received from remote edge devices.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.3
hpnicfEviMacRemoteConflicts Number of remote MACs that conflict with local MACs.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.4

MAC address table that only contains MAC addresses at
the site.

hpnicfEviMacLocalEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1

Detailed informaiton about each local MAC entry.

Indexes

IF-MIBifIndex hpnicfEviMacLocalVlan hpnicfEviMacLocalMacAddr

Column	Syntax	OID
hpnicfEviMacLocalVlan VLANs that contain the local MACs.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.1
hpnicfEviMacLocalMacAddr Local MAC addresses.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.2
hpnicfEviMacLocalMacType MAC address types, including: dynamic MACs, static MACs, and flood MACs (MACs configured for selective flooding).	HpnicfEviMacType Type Values: 1 other 2 dynamic 3 static 4 flood	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.3
hpnicfEviMacLocalConflict Whether the MAC conflicts with any remote MAC.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.4
hpnicfEviMacLocalFiltered Whether the MAC is filtered.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.5

A table contains MAC addresses received from remote edge devices.

hpnicfEviMacRemoteEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1

Detailed information about each remote MAC.

Indexes

IF-MIBifIndex hpnicfEviMacRemoteVlan hpnicfEviMacRemoteMacAddr

Column	Syntax	OID
hpnicfEviMacRemoteVlan VLANs that contain remote MAC addresses.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.1
hpnicfEviMacRemoteMacAddr Remote MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.2
hpnicfEviMacRemoteMacEffect Whether the MAC can be used for forwarding traffic.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.3
hpnicfEviMacRemoteConflict The remote MAC conflicts with a local MAC.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.4

A table that contains routing policy information for each
EVI IS-IS process.

hpnicfEviProcessPolicyEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1.1

Detailed information about the routing policy for each
EVI IS-IS process.

Indexes

hpnicfEviProcessId

Column	Syntax	OID
hpnicfEviProcessId EVI IS-IS process ID.	Unsigned32 Constraints: range: 0-1023	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1.1.1
hpnicfEviProcessPolicy Routing policy for the EVI IS-IS process.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1.1.2

A table that contains graceful restart (GR) information.

hpnicfEviProcessGrEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2.1

Detailed GR information for each EVI IS-IS process.

Indexes

hpnicfEviProcessId

Column	Syntax	OID
hpnicfEviProcessGrEnable Whether the GR function is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2.1.1
hpnicfEviProcessGrInterval EVI IS-IS GR interval in the range of 30 to 1800, in seconds.	Unsigned32r/w Constraints: range: 30-1800	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2.1.2

A table that contains virtual system entries.  Virtual systems are
associated with EVI IS-IS processes.

hpnicfEviProcessVSysEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3.1

Detailed information about each vitual system.

Indexes

hpnicfEviProcessId hpnicfEviVirtualSysId

Column	Syntax	OID
hpnicfEviVirtualSysId Virtual system ID in hexadecimal notation. The virtual system ID must be unique in the EVI network.	ISIS-MIBIsisSystemID Type Constraints: range: 6	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3.1.1
hpnicfEviVirtualSysRowStatus Entry status.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3.1.2

EVI neighbor statistics table.

hpnicfEviISISNbrSummaryEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1

EVI neighbor statistics table entries. The entries
contain the EVI neighbor summary for each EVI IS-IS
process.

Indexes

hpnicfEviProcessId

Column	Syntax	OID
hpnicfEviISISNbrMaxMultiHomes The maximum number of edge devices that the site can contain.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1.1
hpnicfEviISISNbrSiteNbrs The count of neighbors that belong to the same site.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1.2
hpnicfEviISISNbrLinkNbrs The count of neighbors that are in remote sites.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1.3

A table that contains generic information about all
neighbors.

hpnicfEviISISNbrEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1

Detailed information about each neighbor of the edge
device.

Indexes

hpnicfEviProcessId IF-MIBifIndex hpnicfEviISISNbrSysId

Column	Syntax	OID
hpnicfEviISISNbrSysId System ID of the neighbor.	ISIS-MIBIsisSystemID Type Constraints: range: 6	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.1
hpnicfEviISISNbrMacAddr MAC address of the neighbor.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.2
hpnicfEviISISNbrSiteId Site ID of the neighbor.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.3
hpnicfEviISISNbrTransStatus State of EVI transport-facing links.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.4

A table that contains all EVI-enabled neighboring ports of the edge device.

hpnicfEviEnableEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.6.1.1

Detailed information about each EVI-enabled port in the EVI
network.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfEviEnableStatus End station service disable (trunk port) bit. When this bit is set (true), all native frames received on the port and all native frames that would have been sent on the port are discarded. The value of t…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.6.1.1.1

A table that contains basic information about the EVI
Neighbor Discovery Protocol (ENDP).

hpnicfEviNbrBaseEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1

Detailed information about ENDP for each EVI tunnel.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hpnicfEviNbrSelfServerStatus If the value is set to true, the EVI neighbor discovery server (ENDS) is enabled. When you enable ENDS on an EVI tunnel interface, an EVI neighbor discovery client (ENDC) on the EVI tunnel interface is also enabled aut…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1.1
hpnicfEviNbrAuthPassword ENDP authentication key. It is a zero-length string when being read.	OctetStringr/w Constraints: range: 0-24	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1.2
hpnicfEviNbrClientRegisterInterval Interval at which the ENDCs on an EVI tunnel interface update their registration with their ENDSs.	Integer32r/w Constraints: range: 5-120	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1.3

A table that contains basic information about the
remote ENDSs.

hpnicfEviNbrRemoteServerEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1

Detailed information about each remote ENDS. When you set
the address of a remote ENDS on an EVI tunnel interface,
an ENDC is enabled automatically on the EVI tunnel interface.

Indexes

IF-MIBifIndex hpnicfEviNbrRemoteServerType hpnicfEviNbrRemoteServer

Column	Syntax	OID
hpnicfEviNbrRemoteServerType Address type of the remote ENDS, including ipv4 and ipv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1.1
hpnicfEviNbrRemoteServer Address of the remote ENDS. The address type is specified by the hpnicfEviNbrRemoteServerType object. Address length (4 or 16 bytes) must be consistent with the address type.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1.2
hpnicfEviNbrRemoteServerRowStatus Entry status. This object is used to create or delete entries. Deleting entries does not delete this object.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1.3

A table that contains basic information about neighbors
discovered with ENDP.

hpnicfEviNbrEntry row .1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1

Detailed information about each EVI neighbor.

Indexes

IF-MIBifIndex hpnicfEviNbrAddressType hpnicfEviNbrAddress

Column	Syntax	OID
hpnicfEviNbrAddressType Address type of the neighbor, including ipv4 and ipv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.1
hpnicfEviNbrAddress Address of the neighbor. The address type is specified by the hpnicfEviNbrAddressType object. Address length (4 or 16 bytes) must be consistent with the address type.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.2
hpnicfEviNbrSystemID System ID of the neighbor.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.3
hpnicfEviNbrExpireTime Expiration time of the neighbor.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.4
hpnicfEviNbrStatus State of the neighbor.	HpnicfEviNeighborStatus Type Values: 1 up 2 down	.1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.5