HPN-ICF-DSP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
13

hpnicfVPMStatusTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.89.1 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfVPMStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DSP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DSP-MIB::hpnicfVPMStatusTable' 
The table contains status parameters of VPM(Voice Process
Module) card.
hpnicfVPMStatusEntry row .1.3.6.1.4.1.11.2.14.11.15.2.89.1.1
The entry of VPM status table.
Indexes
Column Syntax OID
hpnicfVPMIndex
The index for this entry. The sequence of VPM card in the chassis is
from the top to bottom.
Integer32
Constraints:
range: 1-64
 .1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.1
hpnicfVPMEnPhysicalIndex
The object corresponds to PhysicalIndex in the chassis.
ENTITY-MIBPhysicalIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.2
hpnicfVPMState
The object indicates the current state of VPM card being monitored.
normal(1) - VPM card in normal condition.
warning(2) - VPM card has some problem and need attention.
fatal(3) - VPM card is not functional.
offLine(…
Enumeration
Enumerated Values:
1normal
2warning
3fatal
4offLine
 .1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.3
hpnicfVPMResourceUtilization
The object indicates the percentage of current DSP resource utilization
of the VPM card. The utilization is a ratio of number of busy DSP
resources (for handling calls, transcoding, voice compression,...)
to the total a…
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.4
hpnicfVPMHiWaterUtilization
The object indicates the highest percentage of DSP resource utilization
of the VPM card that have been occured.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.5
hpnicfVPMMaxChannel
The maximum number of channels can be supported in each VPM card.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.89.1.1.6

hpnicfDSPStatusTable

table
.1.3.6.1.4.1.11.2.14.11.15.2.89.2 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfDSPStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DSP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DSP-MIB::hpnicfDSPStatusTable' 
The table contains status parameters of DSP(Digital Signal
Processing) card.
hpnicfDSPStatusEntry row .1.3.6.1.4.1.11.2.14.11.15.2.89.2.1
The entry of DSP status table.
Indexes
Column Syntax OID
hpnicfDSPIndex
The index for this entry. DSP is fixed on VPM card or chassis card.
The sequence of DSP in the VPM card or chassis card is from right to left.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.1
hpnicfDSPVPMIndex
The object corresponds to VPMIndex in the chassis.
If value of this object is non-zero, it is the index of VPM card.(DSP is in
this VPM card.) If value of this object is 0, then the DSP is fixed in the
chassis card.
Integer32
Constraints:
range: 0-64
 .1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.2
hpnicfDSPEnPhysicalIndex
The object corresponds to PhysicalIndex in the chassis.
ENTITY-MIBPhysicalIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.3
hpnicfDSPResetTime
The value of sysUpTime from the last DSP reset occurred.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.4
hpnicfDSPMaxChannel
The maximum number of channels can be supported in each DSP.
The value is chosen in an implementation-dependent manner by the
DSP functionality.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.5
hpnicfDSPState
The object indicates the current state of DSP being monitored.
normal(1) - DSP in normal condition.
fatal(3) - DSP is not functional.
offLine(4) - DSP is in off-line maintenance state.
Enumeration
Enumerated Values:
1normal
3fatal
4offLine
 .1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.6
hpnicfDSPInUseChannel
The number of channels that are reserved for serving calls.
The value is incremented when the DSP channel is reserved for call setup
and is decremented after the DSP channel is free due to call disconnection.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.15.2.89.2.1.7