HPN-ICF-DOT11-WLANEXT-MIB
This MIB provides more information for WLAN network.
GLOSSARY
IEEE 802.11
Standard to encourage interoperability among
wireless networking equipment.
IEEE 802.11e
Standard to define the MAC procedures to support
LAN applications with Quality of Service (QoS) requirements,
including the transport of voice, audio and video over
IEEE 802.11 wireless LANs.
Access point (AP)
Transmitter/receiver (transceiver) device
that commonly connects and transports data
between a wireless network and a wired network.
Access control (AC)
To control and manage multi-APs, it will bridge
wireless and wired network.
Radio
The chip set to receive and send wireless signal.
Fat AP
Applied in the home, SOHO and so on, and it could
independently work without help from AC.
Fit AP
Applied in the enterprise environment, it will work
under the control and management from AC.
Control And Provisioning of Wireless Access Points Protocol
The short name of protocol is CAPWAP. AC will control
and manage AP by CAPWAP tunnel protocol defined by IETF.
Also, a data tunnel will be set up between AC and AP.
Basic Service Set
The IEEE 802.11 BSS of an AP comprises of the
stations directly associating with the AP. It will
be identified by BSSID.
- Source file
HPN-ICF-DOT11-WLANEXT-MIB- Last revised
- Identity
hpnicfDot11WLANEXT- Base OID
1.3.6.1.4.1.11.2.14.11.15.2.75.7
Imported Objects
| HPN-ICF-DOT11-REF-MIB | hpnicfDot11 HpnicfDot11ObjectIDType HpnicfDot11QosAcType HpnicfDot11RadioScopeType |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the hp MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HPN-ICF-DOT11-WLANEXT-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11WLANEXT'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-DOT11-WLANEXT-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-DOT11-WLANEXT-MIB::hpnicfDot11WLANEXT'
Objects (22)
Showing 22 of 22 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.11.2.14.11.15.2.75.7 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.2 |
||
|
secondSNMPv2-SMIInteger32
|
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.3 |
|
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.4 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.5 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.1.1.1.6 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.2 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.3 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.4 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.1.1.5 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.15.2.75.7.2.2.1.2 |
Dependencies (5) 2 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- RFC1155-SMIrfc
- HPN-ICF-OID-MIBhp
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- HPN-ICF-DOT11-REF-MIBhp
- HPN-ICF-DOT11-WLANEXT-MIBhpselected