HPN-ICF-BFD-STD-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
4
Rows
4
Columns
28
hpnicfBfdIfTable
table.1.3.6.1.4.1.11.2.14.11.15.2.72.1.2
·
1 row entry
·
5 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk hpnicfBfdIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-BFD-STD-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-BFD-STD-MIB::hpnicfBfdIfTable'
This Table describes the BFD interface specific information.
This Entry describes the BFD interface specific information.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hpnicfBfdIfIndexThis variable contains an index that represents a unique BFD interface on this device. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.1 | ||||||||||||
| hpnicfBfdIfDesiredMinTxIntervalThis variable defines the minimum interval, in microseconds, that the interface would like to use when transmitting BFD Control packets. | BfdIntervalr/w Type Constraints: range: 1..4294967295 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.2 | ||||||||||||
| hpnicfBfdIfDesiredMinRxIntervalThis variable defines the minimum interval, in, microseconds, between received BFD Control packets the local system is capable of supporting. | BfdIntervalr/w Type Constraints: range: 1..4294967295 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.3 | ||||||||||||
| hpnicfBfdIfDetectMultThe desired detect time multiplier for BFD control packets. The negotiated control packet transmission interval, multiplied by this variable, will be the detection time for this session (as seen by the remote system.) … | SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.4 | ||||||||||||
| hpnicfBfdIfAuthTypeThe Authentication Type used for this interface. This field is valid only when the Authentication Present bit is set. The 'none' indicates the session doesn't support authentication. The 'simple' indicate… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.14.11.15.2.72.1.2.1.5 |
hpnicfBfdSessTable
table.1.3.6.1.4.1.11.2.14.11.15.2.72.1.3
·
1 row entry
·
15 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk hpnicfBfdSessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-BFD-STD-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-BFD-STD-MIB::hpnicfBfdSessTable'
This table describes the BFD sessions.
This Entry describes the BFD sessions.
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hpnicfBfdSessIfIndexThis variable contains an interface's index under which the BFD session runs. | IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.1 | ||||||||||||||||||
| hpnicfBfdSessIndexThis variable contains an index which represents a unique BFD session on this device. | BfdSessIndexTC Type Constraints: range: 1..4294967295 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.2 | ||||||||||||||||||
| hpnicfBfdSessAppSupportIdThis variable contains an ID used to indicate a local application which owns or maintains this BFD session. Note, a BFD session can support several route protocols. This is a bit-map of possible conditions. The correspo… | Bits Enumerated Values:
| .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.3 | ||||||||||||||||||
| hpnicfBfdSessLocalDiscrThis variable defines the local discriminator for this BFD session, used to uniquely identify it. | Unsigned32 Constraints: range: 1-4294967295 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.4 | ||||||||||||||||||
| hpnicfBfdSessRemoteDiscrThis variable defines the session discriminator chosen by the remote system for this BFD session. | Unsigned32 Constraints: range: 1-4294967295 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.5 | ||||||||||||||||||
| hpnicfBfdSessDstPortThe UDP Port for BFD. The default value is the well-known value for this port. | INET-ADDRESS-MIBInetPortNumber Type Constraints: range: 0..65535 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.6 | ||||||||||||||||||
| hpnicfBfdSessOperModeThis variable defines current operating mode that BFD session is running in. The primary mode which the BFD session runs in is known as Asynchronous mode. In this mode, the systems periodically send BFD … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.7 | ||||||||||||||||||
| hpnicfBfdSessAddrTypeThis object defines IP address type of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of unknown(0) is allowed only… | INET-ADDRESS-MIBInetAddressType Type Values:
| .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.8 | ||||||||||||||||||
| hpnicfBfdSessLocalAddrThis variable defines IP address of the local interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated … | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.9 | ||||||||||||||||||
| hpnicfBfdSessRemoteAddrThis variable defines IP address of the remote interface from which the BFD packets is transmitted. It can also be used to enabled BFD on a specific interface. The value is set to zero when BFD session is not associated… | INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.10 | ||||||||||||||||||
| hpnicfBfdSessLocalDiagThe BFD diagnostic code for the BFD session was down with the neighbor. If no such event happens this object contains a zero value. | BfdDiag Type Values:
| .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.11 | ||||||||||||||||||
| hpnicfBfdSessStateThe state of the running BFD session. There are three states through which a session normally proceeds, two for establishing a session (Init and Up) and one for tearing down a session (Down.) This allows… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.12 | ||||||||||||||||||
| hpnicfBfdSessControlPlanIndepFlagThis variable indicates whether the local system can continue to work while the control plane is out of work. Specifically, it is set to true(1) if the local system is independent of the control plane. Otherwise, the va… | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.13 | ||||||||||||||||||
| hpnicfBfdSessAuthFlagThis variable indicates that the local system wants to use Authentication. Specifically, it is set to true(1) if the local system wishes the session to be authenticated or false(0) if not. | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.14 | ||||||||||||||||||
| hpnicfBfdSessDemandModeFlagThis variable indicates that the local system wants to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or false(0) if not | SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.3.1.15 |
hpnicfBfdSessStatTable
table.1.3.6.1.4.1.11.2.14.11.15.2.72.1.4
·
1 row entry
·
5 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk hpnicfBfdSessStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-BFD-STD-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-BFD-STD-MIB::hpnicfBfdSessStatTable'
The table defines BFD session state.
An entry in this table is created by a BFD-enabled node for
every BFD Session. It defines BFD session statistics.
every BFD Session. It defines BFD session statistics.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| hpnicfBfdSessStatPktInHCThe total number of BFD messages received by this BFD session. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.1 |
| hpnicfBfdSessStatPktOutHCThe total number of BFD messages sent by this BFD session. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.2 |
| hpnicfBfdSessStatDownCountThe number of times this session has gone into the Down state since the router last rebooted. | SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.3 |
| hpnicfBfdSessStatPktDiscardThe number of packets the local system has discarded since the router last rebooted. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.4 |
| hpnicfBfdSessStatPktLostThe number of packets the local system has failed to transmit since the router last rebooted. | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.4.1.5 |
hpnicfBfdSessPerfTable
table.1.3.6.1.4.1.11.2.14.11.15.2.72.1.5
·
1 row entry
·
3 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk hpnicfBfdSessPerfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-BFD-STD-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-BFD-STD-MIB::hpnicfBfdSessPerfTable'
The table defines BFD session performance.
An entry in this table is created by a BFD-enabled node for
every BFD session. It defines BFD Session performance.
every BFD session. It defines BFD Session performance.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
| hpnicfBfdSessPerfCreatTimeThe value of sysUpTime when the session was created. If no such create event exists this object contains a zero value. | SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1.1 |
| hpnicfBfdSessPerfLastUpTimeThe value of sysUpTime when the last time communication was lost. If no such up event exists this variable contains a zero value. | SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1.2 |
| hpnicfBfdSessPerfLastDownTimeThe value of sysUpTime when the last time communication was lost with the neighbor. If no such event exist this variable contains a zero value. | SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… | .1.3.6.1.4.1.11.2.14.11.15.2.72.1.5.1.3 |