HPN-ICF-ACFP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
53
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfAcfpClientInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-ACFP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-ACFP-MIB::hpnicfAcfpClientInfoTable'
This table contains the basic information about ACFP client.
hpnicfAcfpClientInfoEntry row .1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1
This list contains the basic information about ACFP client.
Column Syntax OID
hpnicfAcfpClientIDThe identifier of ACFP client.Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.1
hpnicfAcfpClientDescriptionDescription of the application that is running on ACFP
client, eg. IPS, VCX.
OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.2
hpnicfAcfpClientHwVersionThe hardware revision of ACFP client.OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.3
hpnicfAcfpClientOSVersionThe operating system version running ACFP client.OctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.4
hpnicfAcfpClientAppVersionThe application version running on ACFP clientOctetStringr/w
Constraints:
range: 0-64
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.5
hpnicfAcfpClientIPIP address of ACFP client.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.6
hpnicfAcfpClientModeACFP client informs Router or switch which mode it is operating.
Router or switch checks hpnicfAcfpServerInfo to see whether it is
capable of fulfilling this function. If not, router or switch
generates a trap informin…
Bitsr/w
Enumerated Values:
0ipserver
1redirect
2mirror
3passThrough
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.7
hpnicfAcfpClientRowStatusRowStatus, supports three states: createAndGo, active, destroy.
Creation Operation Restriction:
Node hpnicfAcfpClientMode must be bound while creating a row. It is
optional for other nodes.
ACFP module must be enabled f…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.2.1.1.8
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1 · 1 row entry · 12 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfAcfpPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-ACFP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-ACFP-MIB::hpnicfAcfpPolicyTable'
This table lists all current policies for ACFP
client(s).  Entries in this table are created or removed
implicitly when entries in the hpnicfAcfpRuleTable are
created or removed, respectively.  A policy entry in this
table only exists as long as there is rule of this policy
in the hpnicfAcfpRuleTable.  The table serves for listing the
existing policies and their remaining lifetimes and for
changing lifetimes of policies and implicitly of all policy
members and all their member policy rules can be
deleted by setting hpnicfAcfpPolicyLifetime to 0.
hpnicfAcfpPolicyEntry row .1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1
The list contains basic information of ACFP Policy.
Column Syntax OID
hpnicfAcfpPolicyIndexThe identifier of the Policy of ACFP clientInteger32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.1
hpnicfAcfpPolicyInIfIndexPacket is received from this interface. The value of this object
contains the same value of ifIndex of ifTable.
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.2
hpnicfAcfpPolicyOutIfIndexPacket is sent to this interface. The value of this object
contains the same value of ifIndex of ifTable.
Integer32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.3
hpnicfAcfpPolicyDestIfIndexThrough this interface, packet go to ACFP client from
ACFP server. The value of this object contains the same
value of ifIndex of ifTable.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.4
hpnicfAcfpPolicyContextIDInternal id ACFP server allocated used to map to the interface.
ACFP server may send packet with this hpnicfAcfpPolicyContextID to
ACFP client, ACFP client can make use of this hpnicfAcfpPolicyContextID
and find the pol…
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.5
hpnicfAcfpPolicyAdminStatusThe value of this object indicates the desired status of the
policy.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.6
hpnicfAcfpPolicyLifetimeWhen retrieved, this object delivers the maximum lifetime (seconds)
of all the rules of this, i.e., of all the rows in hpnicfAcfpRuleTable
that have the same values of hpnicfAcfpRulePolicyIndex and
hpnicfAcfpClientID. …
secondsInteger32r/w
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.7
hpnicfAcfpPolicyTimeStartBeginning time of this policy every day. Eg. HH:MM:SSOctetStringr/w
Constraints:
range: 8-8
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.8
hpnicfAcfpPolicyTimeEndEnding time of this policy every day. Eg. HH:MM:SSOctetStringr/w
Constraints:
range: 8-8
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.9
hpnicfAcfpPolicyRowStatusRowStatus, supports three states: createAndGo, active, destroy.
Creation Operation Restriction:
The client corresponding to the index hpnicfAcfpClientID must exist
while creating a row.
Nodes hpnicfAcfpPolicyTimeStart a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.10
hpnicfAcfpPolicyDestIfFailActionThe value of this object indicates the action of the
policy when the destination interface failed.
Enumerationr/w
Enumerated Values:
1delete
2reserve
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.11
hpnicfAcfpPolicyPriorityThe value of this object indicates the priority of the
policy.
Priority8 is maximal priority.
Priority1 is minimal priority.
Enumerationr/w
Enumerated Values:
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
8priority8
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.3.1.1.12
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1 · 1 row entry · 33 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpnicfAcfpRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPN-ICF-ACFP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPN-ICF-ACFP-MIB::hpnicfAcfpRuleTable'
This table lists all the rules.  It is indexed by
hpnicfAcfpClientID, hpnicfAcfpRulePolicyIndex and hpnicfAcfpRuleIndex.
Entries can be deleted by writing hpnicfAcfpPolicyLifetime to 0.
hpnicfAcfpRuleEntry row .1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1
The list contains basic information of the rule.
Column Syntax OID
hpnicfAcfpRuleIndexThe identifier of the rules which have the same hpnicfAcfpPolicyIndex
and hpnicfAcfpClientID.hpnicfAcfpRuleIndex indicates rule sequence in the
same policy.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.1
hpnicfAcfpRuleOperStatusThe value of this object indicates the status of a rule.
success : Applied rule to interface successfully.
fail : Failed to apply rule to interface.
Enumeration
Enumerated Values:
1success
2fail
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.2
hpnicfAcfpRuleActionThe action of this rule.Enumerationr/w
Enumerated Values:
1permit
2deny
3redirect
4mirror
5rate
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.3
hpnicfAcfpRuleAllThe rule match all packet or does not.
true : all
false : not all
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.4
hpnicfAcfpRuleSrcMACSource MAC of this rule.SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.5
hpnicfAcfpRuleDstMACDestination MAC of this rule.SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.6
hpnicfAcfpRuleVlanStartStarting VLAN id of this rule.
0 : Invalid value
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.7
hpnicfAcfpRuleVlanEndEnding VLAN id of this rule.
0 : Invalid value
Integer32r/w
Constraints:
range: 0-4094
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.8
hpnicfAcfpRuleProtocolThe protocol-type of this rule.
<0-255> Protocol number
gre GRE tunneling(47)
icmp Internet Control Message Protocol(1)
igmp Internet Management Protocol(2)
ip Any IP protocol(0)
ipinip IP in IP tu…
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.9
hpnicfAcfpRuleSrcIPSource IP address of this rule.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.10
hpnicfAcfpRuleSrcIPMaskSource IP-address wild of this rule. Eg. 0.0.0.255.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.11
hpnicfAcfpRuleSrcOpSource Port operation for this ruleEnumerationr/w
Enumerated Values:
1equal
2notEqual
3lessThan
4greaterThan
5range
6invalid
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.12
hpnicfAcfpRuleSrcStartPortStarting UDP/TCP Source Port number of this rule.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.13
hpnicfAcfpRuleSrcEndPortEnding UDP/TCP Source Port of this rule.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.14
hpnicfAcfpRuleDstIPDestination IP address of this rule.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.15
hpnicfAcfpRuleDstIPMaskDestination IP-address wild of this rule. Eg. 0.0.0.255SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.16
hpnicfAcfpRuleDstOpDestination Port operation for this ruleEnumerationr/w
Enumerated Values:
1equal
2nonEqual
3lessThan
4greaterThan
5range
6invalid
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.17
hpnicfAcfpRuleDstStartPortStarting UDP/TCP Destination Port number of this rule.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.18
hpnicfAcfpRuleDstEndPortEnding UDP/TCP Destination Port of this rule.Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.19
hpnicfAcfpRulePrecedenceThe value of precedence field in IP header.
<255> Invalid value
<0-7> value of precedence
routine(0) Routine precedence
priority(1) Priority precedence
immediate(…
Integer32r/w
Constraints:
range: 255-255
range: 0-7
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.20
hpnicfAcfpRuleTosThe value of TOS field in IP header.
<255> Invalid value
<0-15> value of ToS (Type of Service)
Normal(0) normal service
min-monetary-cost(1) minimum monetary cost
max-reli…
Integer32r/w
Constraints:
range: 255-255
range: 0-15
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.21
hpnicfAcfpRuleDscpThe value of DSCP.
<255> Invalid value
<0-63> value of DSCP
Be(0) best effort
af11(10) assured forwarding 11 service
af12(12) assured forward…
Integer32r/w
Constraints:
range: 255-255
range: 0-63
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.22
Establish Flag. Matches the TCP packets with the ACK
and/or RST flag, including the TCP packets of these
types: SYN+ACK, ACK, FIN+ACK, RST, RST+ACK.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.23
hpnicfAcfpRuleFragmentThe flag of matching fragmented packet.SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.24
hpnicfAcfpRulePacketRatePacket rate (Kbps) of this rule.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.25
hpnicfAcfpRuleRowStatusRowStatus, supports three states: createAndGo, active, destroy.
Creation Operation Restriction:
Node hpnicfAcfpRuleAction must be bound while creating a line.
Nodes hpnicfAcfpRuleAll and hpnicfAcfpRuleProtocol, hpnicfAc…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.26
hpnicfAcfpRuleTCPFlagTCP Flag.
<0> don't care for TCP flag to match packets
<1-65535> care for TCP flag to match packets,
the value is combination of next list.
URG_VALID (1 << 13)
URG_SET (1 << 5)
…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.27
hpnicfAcfpRuleSrcIPV6AddressSource IPv6 address of this rule.IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.28
hpnicfAcfpRuleSrcPrefixLenSource IPv6 address prefix length of this rule. Eg. 64.INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.29
hpnicfAcfpRuleDstIPV6AddressDestination IPv6 address of this rule.IPV6-TCIpv6Addressr/w
Type Constraints:
range: 16
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.30
hpnicfAcfpRuleDstPrefixLenDestination IPv6 address prefix length of this rule. Eg. 64.INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.31
hpnicfAcfpRuleTrafficTypeTraffic type of this rule. When retrieved, this object
returns a set of bits indicating the traffic type.
Bitsr/w
Enumerated Values:
0unicast
1multicast
2broadcast
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.32
hpnicfAcfpRuleTypeOrLenThe type or length of ethernet packet.
For Ethernet II encapsulation, it stands for packet type.
For 802.3 encapsulation, it stands for packet length.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.14.11.15.2.74.1.1.4.1.1.33