HPE-rlMacMulticast-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
89

rlIgmpSnoopVlanTable

table obsolete
.1.3.6.1.4.1.11.2.55.2.7 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlIgmpSnoopVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-rlMacMulticast-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-rlMacMulticast-MIB::rlIgmpSnoopVlanTable' 
The table listing the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports.
rlIgmpSnoopVlanEntry row .1.3.6.1.4.1.11.2.55.2.7.1
An entry (conceptual row) in the rlIgmpSnoopVlanTable.
Indexes
Column Syntax OID
rlIgmpSnoopVlanTagobsolete
The tag of the VLAN for which this entry contains
information for an IP Multicast Router.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.55.2.7.1.1
rlIgmpSnoopVlanEnableobsolete
Enable/Disable IGMP Snooping in the vlan.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.2.7.1.2
rlIgmpSnoopVlanRouterLearnobsolete
Enable/Disable of Learning of routers in the vlan.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.2.7.1.3
rlIgmpSnoopVlanHostTimeOutobsolete
The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
secondsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.55.2.7.1.4
rlIgmpSnoopVlanQuerierTimeOutobsolete
The amount of time where no query is heard until
querier is activated
secondsInteger32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.55.2.7.1.5
rlIgmpSnoopVlanRouterTimeOutobsolete
The amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
secondsInteger32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.55.2.7.1.6
rlIgmpSnoopVlanLeaveTimeOutobsolete
The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.
secondsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.55.2.7.1.7
rlIgmpSnoopVlanIgmpVersionobsolete
The current IGMP protocol version running on the VLAN.
IgmpVersion
Type Values:
0none
1v1
2v2
3v3
 .1.3.6.1.4.1.11.2.55.2.7.1.8
rlIgmpSnoopVlanRouterPortlistobsolete
List of router ports learned dynamically on this VLAN
from PIM, DVMRP, MRDISC and IGMP Query messages
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.11.2.55.2.7.1.9

rlIgmpSnoopMulticastTvTable

table
.1.3.6.1.4.1.11.2.55.2.10 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlIgmpSnoopMulticastTvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-rlMacMulticast-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-rlMacMulticast-MIB::rlIgmpSnoopMulticastTvTable' 
multicast vlan used for this port
rlIgmpSnoopMulticastTvEntry row .1.3.6.1.4.1.11.2.55.2.10.1
entry of multicast ip
Indexes
Column Syntax OID
rlIgmpSnoopMulticastTvVID
Specify the multicast ip to be used.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.11.2.55.2.10.1.1
rlIgmpSnoopMulticastTvGroup
Specify the multicast ip to be used.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.55.2.10.1.2
rlIgmpSnoopMulticastTvStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.55.2.10.1.3
rlIgmpSnoopMulticastTvCount
The number of addresses starting with rlIgmpSnoopMulticastTvGroup.
Integer32r/w
Constraints:
range: 1-268435456
 .1.3.6.1.4.1.11.2.55.2.10.1.4

rlIgmpSnoopMembershipTable

table
.1.3.6.1.4.1.11.2.55.2.11 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlIgmpSnoopMembershipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-rlMacMulticast-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-rlMacMulticast-MIB::rlIgmpSnoopMembershipTable' 
The table listing the IP multicast memberships.
rlIgmpSnoopMembershipEntry row .1.3.6.1.4.1.11.2.55.2.11.1
An entry (conceptual row) in the rlIgmpSnoopMembershipTable.
Indexes
Column Syntax OID
rlIgmpSnoopMembershipVlanTag
The VLAN tag for which this entry contains multicast membership information.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.11.2.55.2.11.1.1
rlIgmpSnoopMembershipGroupIpAddress
The multicast group address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.55.2.11.1.2
rlIgmpSnoopMembershipSourceIpAddress
The unicast source address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.55.2.11.1.3
rlIgmpSnoopMembershipIncPortlist
Included ports, where a report message was heard for the group
(IGMP version 2|1) or group and source address (IGMP version 3).
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.11.2.55.2.11.1.4
rlIgmpSnoopMembershipExcPortlist
Excluded ports where an exclude report message
was heard for the group and source address (IGMP version 3).
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.11.2.55.2.11.1.5
rlIgmpSnoopMembershipExpiryTimeobsolete
Time till entry will expire.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.55.2.11.1.6
rlIgmpSnoopMembershipCompatibilityMode
IGMP group compatibility mode.
IgmpVersion
Type Values:
0none
1v1
2v2
3v3
 .1.3.6.1.4.1.11.2.55.2.11.1.7

rlIgmpSnoopQuerierVlanTable

table
.1.3.6.1.4.1.11.2.55.2.12 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlIgmpSnoopQuerierVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-rlMacMulticast-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-rlMacMulticast-MIB::rlIgmpSnoopQuerierVlanTable' 
A table that contains IGMP Snooping Querier information about
every vlan. This is indexed by vlan tag.
rlIgmpSnoopQuerierVlanEntry row .1.3.6.1.4.1.11.2.55.2.12.1
An entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable.
Indexes
Column Syntax OID
rlIgmpSnoopQuerierVlanTag
An IGMP Snoop Querier entry vlan tag.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.11.2.55.2.12.1.1
rlIgmpSnoopQuerierAdminEnable
The desired administrative state of IGMP Snoop Querier on the vlan.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.2.12.1.2
rlIgmpSnoopQuerierOperEnable
The current operational state of IGMP Snoop Querier on the vlan.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.2.12.1.3
rlIgmpSnoopQuerierAdminAddr
The desired IP address is being used in IGMP Snoop Querier messages on the vlan.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.55.2.12.1.4
rlIgmpSnoopQuerierOperAddr
The current operational IP address is being used in IGMP Snoop Querier messages on the vlan.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.11.2.55.2.12.1.5
rlIgmpSnoopQuerierAdminVersionNumber
The highest version number of IGMP Snoop Querier for the vlan.
IgmpVersionr/w
Type Values:
0none
1v1
2v2
3v3
 .1.3.6.1.4.1.11.2.55.2.12.1.6
rlIgmpSnoopQuerierOperVersionNumber
The current operational version number of IGMP Snoop Querier for the vlan.
IgmpVersion
Type Values:
0none
1v1
2v2
3v3
 .1.3.6.1.4.1.11.2.55.2.12.1.7
rlIgmpSnoopQuerierElectionEnable
Whether or not to participate in querier election.
When true, the snooping querier participates in querier election.
When false, the snooping querier is the elected querier until a general
query is heard from another ro…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.2.12.1.8

rlIgmpMldSnoopMembershipTable

table
.1.3.6.1.4.1.11.2.55.5.4 · 1 row entry · 9 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlIgmpMldSnoopMembershipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-rlMacMulticast-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-rlMacMulticast-MIB::rlIgmpMldSnoopMembershipTable' 
The table listing the IP multicast memberships.
rlIgmpMldSnoopMembershipEntry row .1.3.6.1.4.1.11.2.55.5.4.1
An entry (conceptual row) in the rlIgmpMldSnoopMembershipTable.
Indexes
Column Syntax OID
rlIgmpMldSnoopMembershipVlanTag
The VLAN tag for which this entry contains multicast membership information.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.11.2.55.5.4.1.1
rlIgmpMldSnoopMembershipGroupIpAddressType
Inet type IPv4/IPv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.55.5.4.1.2
rlIgmpMldSnoopMembershipGroupIpAddress
The multicast group address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.55.5.4.1.3
rlIgmpMldSnoopMembershipSourceIpAddressType
Inet type IPv4/IPv6.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.55.5.4.1.4
rlIgmpMldSnoopMembershipSourceIpAddress
The unicast source address.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.55.5.4.1.5
rlIgmpMldSnoopMembershipIncPortlist
Included ports, where a report message was heard for the group
(IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2).
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.11.2.55.5.4.1.6
rlIgmpMldSnoopMembershipExcPortlist
list of excluded ports to which an exclude report message
was heard for the group and source address (IGMPv3/MLDv2 ).
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.11.2.55.5.4.1.7
rlIgmpMldSnoopMembershipExpiryTimeobsolete
Time till entry will expire.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.55.5.4.1.8
rlIgmpMldSnoopMembershipCompatibilityMode
IGMP/MLD group compatibility mode.
IgmpVersion
Type Values:
0none
1v1
2v2
3v3
 .1.3.6.1.4.1.11.2.55.5.4.1.9

rlIgmpMldSnoopVlanTable

table
.1.3.6.1.4.1.11.2.55.5.5 · 1 row entry · 34 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlIgmpMldSnoopVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-rlMacMulticast-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-rlMacMulticast-MIB::rlIgmpMldSnoopVlanTable' 
The table lists the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports.
rlIgmpMldSnoopVlanEntry row .1.3.6.1.4.1.11.2.55.5.5.1
An entry (conceptual row) in the rlIgmpSnoopVlanTable.
Indexes
Column Syntax OID
rlIgmpMldSnoopVlanInetAddressType
Inet type ipv6/ipv4.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.55.5.5.1.1
rlIgmpMldSnoopVlanTag
The tag of the VLAN for which this entry contains
information for an IP Multicast Router.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.2
rlIgmpMldSnoopVlanEnable
Enable/Disable IGMP Snooping in the vlan.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.5.5.1.3
rlIgmpMldSnoopVlanRouterLearn
Enable/Disable of Learning of routers in the vlan.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.5.5.1.4
rlIgmpMldSnoopVlanHostTimeOutobsolete
The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
secondsInteger32r/w
Constraints:
range: 60-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.5
rlIgmpMldSnoopVlanQuerierTimeOutobsolete
The amount of time where no query is heard until
querier is activated
secondsInteger32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.6
rlIgmpMldSnoopVlanRouterTimeOutobsolete
The amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
secondsInteger32r/w
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.7
rlIgmpMldSnoopVlanLeaveTimeOutobsolete
The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.
secondsInteger32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.8
rlIgmpMldSnoopVlanIgmpVersion
The current IGMP protocol version running on the VLAN.
IgmpVersion
Type Values:
0none
1v1
2v2
3v3
 .1.3.6.1.4.1.11.2.55.5.5.1.9
rlIgmpMldSnoopVlanRouterPortlist
List of router ports learned dynamically
from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLAN
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.11.2.55.5.5.1.10
rlIgmpMldSnoopVlanRouterStaticPortlist
List of router ports configured statically on this VLAN.
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.11.2.55.5.5.1.11
rlIgmpMldSnoopVlanRouterForbiddenPortlist
List of ports statically configured to NOT
be router ports on this VLAN
Q-BRIDGE-MIBPortListr/w .1.3.6.1.4.1.11.2.55.5.5.1.12
rlIgmpMldSnoopVlanQueryOverride
Enable/Disable overriding of Query values
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.5.5.1.13
rlIgmpMldSnoopVlanOperRobustness
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP and
MLD are robust to (Robustness Variable-1) packet …
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.11.2.55.5.5.1.14
rlIgmpMldSnoopVlanOperQueryInterval
The frequency at which IGMP or MLD Host-Query packets are
transmitted on this interface. This variable must be a
non-zero value.
millisecondsUnsigned32
Constraints:
range: 1000-31744000
 .1.3.6.1.4.1.11.2.55.5.5.1.15
rlIgmpMldSnoopVlanOperQueryMaxResponseTime
The maximum query response interval advertised in MGMDv2
or v3 queries on this interface.
millisecondsUnsigned32
Constraints:
range: 0-8387584
 .1.3.6.1.4.1.11.2.55.5.5.1.16
rlIgmpMldSnoopVlanOperLastMemberQueryInterval
The Last Member Query Interval is the Max Query Response
Interval inserted into group-specific queries sent in
response to leave group messages, and is also the amount
of time between group-specific query messages. Thi…
millisecondsUnsigned32
Constraints:
range: 0-8387584
 .1.3.6.1.4.1.11.2.55.5.5.1.17
rlIgmpMldSnoopVlanOperLastMemberQueryCount
Represents the number of group-specific and
group-and-source-specific queries sent by the router before
it assumes there are no local members.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.11.2.55.5.5.1.18
rlIgmpMldSnoopVlanOperStartupQueryInterval
This variable represents the interval between General
Queries sent by a Querier on startup.
millisecondsUnsigned32
Constraints:
range: 0-31744000
 .1.3.6.1.4.1.11.2.55.5.5.1.19
rlIgmpMldSnoopVlanOperStartupQueryCount
Represents the number of Queries sent out on startup
separated by the Startup Query Interval.
Unsigned32
Constraints:
range: 1-255
 .1.3.6.1.4.1.11.2.55.5.5.1.20
rlIgmpMldSnoopVlanOperHostTimeOut
The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
DEFVAL { rlIgmpMldSnoopVlanOperRobustness *
rlIgmpMldSnoopVlanOperQueryInterval +
rlIgm…
millisecondsUnsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.21
rlIgmpMldSnoopVlanOperRouterTimeOut
The amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
DEFVAL { rlIgmpMldSnoopVlanOperRobustness *
rlIgmpMldSnoopVlanOperQueryInterval }
millisecondsUnsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.22
rlIgmpMldSnoopVlanOperLeaveTimeOut
The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.
DEFVAL { rlIgmpMldSnoopVlanOperLastMem…
millisecondsUnsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.23
rlIgmpMldSnoopVlanAdminRobustness
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP and
MLD are robust to (Robustness Variable-1) packet …
Unsigned32r/w
Constraints:
range: 1-7
 .1.3.6.1.4.1.11.2.55.5.5.1.24
rlIgmpMldSnoopVlanAdminQueryInterval
The frequency at which IGMP or MLD Host-Query packets are
transmitted on this interface. This variable must be a
non-zero value.
millisecondsUnsigned32r/w
Constraints:
range: 1000-18000000
 .1.3.6.1.4.1.11.2.55.5.5.1.25
rlIgmpMldSnoopVlanAdminQueryMaxResponseTime
The maximum query response interval advertised in MGMDv2
or v3 queries on this interface.
millisecondsUnsigned32r/w
Constraints:
range: 1000-20000
 .1.3.6.1.4.1.11.2.55.5.5.1.26
rlIgmpMldSnoopVlanAdminLastMemberQueryInterval
The Last Member Query Interval is the Max Query Response
Interval inserted into group-specific queries sent in
response to leave group messages, and is also the amount
of time between group-specific query messages. Thi…
millisecondsUnsigned32r/w
Constraints:
range: 100-25500
 .1.3.6.1.4.1.11.2.55.5.5.1.27
rlIgmpMldSnoopVlanAdminLastMemberQueryCount
Represents the number of group-specific and
group-and-source-specific queries sent by the router before
it assumes there are no local members. Value 0 is used to indicate
usage of default value. DEFVAL { rlIgmpMldSno…
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.11.2.55.5.5.1.28
rlIgmpMldSnoopVlanAdminStartupQueryInterval
This variable represents the interval between General
Queries sent by a Querier on startup.
millisecondsUnsigned32r/w
Constraints:
range: 0-4500000
 .1.3.6.1.4.1.11.2.55.5.5.1.29
rlIgmpMldSnoopVlanAdminStartupQueryCount
Represents the number of Queries sent out on startup
separated by the Startup Query Interval.
Unsigned32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.11.2.55.5.5.1.30
rlIgmpMldSnoopVlanAdminHostTimeOutobsolete
The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
DEFVAL { rlIgmpMldSnoopVlanAdminRobustness *
rlIgmpMldSnoopVlanAdminQueryInterval +
rlI…
millisecondsUnsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.31
rlIgmpMldSnoopVlanAdminRouterTimeOutobsolete
The amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
DEFVAL { rlIgmpMldSnoopVlanAdminRobustness *
rlIgmpMldSnoopVlanAdminQueryInterval }
millisecondsUnsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.32
rlIgmpMldSnoopVlanAdminLeaveTimeOutobsolete
The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.
DEFVAL { rlIgmpMldSnoopVlanAdminLastMe…
millisecondsUnsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.55.5.5.1.33
rlIgmpMldSnoopVlanIsImmediateLeave
Enable/Disable immediate leave on this Vlan
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.5.5.1.34

rlIgmpMldSnoopMulticastTvTable

table
.1.3.6.1.4.1.11.2.55.5.6 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlIgmpMldSnoopMulticastTvTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-rlMacMulticast-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-rlMacMulticast-MIB::rlIgmpMldSnoopMulticastTvTable' 
multicast vlan used for this port
rlIgmpMldSnoopMulticastTvEntry row .1.3.6.1.4.1.11.2.55.5.6.1
entry of multicast ip
Indexes
Column Syntax OID
rlIgmpMldSnoopMulticastTvInetAddressType
Inet type ipv6/ipv4.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.55.5.6.1.1
rlIgmpMldSnoopMulticastTvVID
Specify the multicast ip to be used.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.11.2.55.5.6.1.2
rlIgmpMldSnoopMulticastTvGroupAddressType
Inet type ipv6/ipv4.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.55.5.6.1.3
rlIgmpMldSnoopMulticastTvGroup
Specify the multicast ip to be used.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.55.5.6.1.4
rlIgmpMldSnoopMulticastTvStatus
The row status variable, used according to
row installation and removal conventions.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.55.5.6.1.5

rlMldSnoopQuerierVlanTable

table
.1.3.6.1.4.1.11.2.55.5.7 · 1 row entry · 10 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlMldSnoopQuerierVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-rlMacMulticast-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-rlMacMulticast-MIB::rlMldSnoopQuerierVlanTable' 
A table that contains MLD Snooping Querier information about
every vlan. This is indexed by vlan tag.
rlMldSnoopQuerierVlanEntry row .1.3.6.1.4.1.11.2.55.5.7.1
An entry (conceptual row) in the rlMldSnoopQuerierVlanTable.
Indexes
Column Syntax OID
rlMldSnoopQuerierVlanTag
An MLD Snoop Querier entry vlan tag.
Q-BRIDGE-MIBVlanIndex .1.3.6.1.4.1.11.2.55.5.7.1.1
rlMldSnoopQuerierAdminEnable
The desired administrative state of MLD Snoop Querier on the vlan.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.5.7.1.2
rlMldSnoopQuerierOperEnable
The current operational state of MLD Snoop Querier on the vlan.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.5.7.1.3
rlMldSnoopQuerierAdminAddrInetAddressType
Inet type IPv6/IPv4.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.55.5.7.1.4
rlMldSnoopQuerierAdminAddr
The desired IP address is being used in MLD Snoop Querier messages on the vlan.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.55.5.7.1.5
rlMldSnoopQuerierOperAddrInetAddressType
Inet type IPv6/IPv4.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.55.5.7.1.6
rlMldSnoopQuerierOperAddr
The current operational IP address is being used in MLD Snoop Querier messages on the vlan.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.55.5.7.1.7
rlMldSnoopQuerierAdminVersionNumber
The highest version number of MLD Snoop Querier for the vlan.
MldVersionr/w
Type Values:
0none
1v1
2v2
 .1.3.6.1.4.1.11.2.55.5.7.1.8
rlMldSnoopQuerierOperVersionNumber
The current operational version number of MLD Snoop Querier for the vlan.
MldVersion
Type Values:
0none
1v1
2v2
 .1.3.6.1.4.1.11.2.55.5.7.1.9
rlMldSnoopQuerierElectionEnable
Whether or not to participate in querier election.
When true, the snooping querier participates in querier election.
When false, the snooping querier is the elected querier until a general
query is heard from another ro…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.55.5.7.1.10

rlIgmpMldSnoopQuerierGlobalAddressTable

table
.1.3.6.1.4.1.11.2.55.5.9 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlIgmpMldSnoopQuerierGlobalAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-rlMacMulticast-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-rlMacMulticast-MIB::rlIgmpMldSnoopQuerierGlobalAddressTable' 
A table that contains IGMP/MLD Snooping Querier global address.
rlIgmpMldSnoopQuerierGlobalAddressEntry row .1.3.6.1.4.1.11.2.55.5.9.1
An entry (conceptual row) in the rlIgmpMldSnoopQuerierGlobalAddressTable.
Indexes
Column Syntax OID
rlIgmpMldSnoopQuerierGlobalAddressIPVersion
The IP version of this PIM interface. A physical interface
may be configured in multiple modes concurrently, e.g., IPv4
and IPv6; however, the traffic is considered to be logically
separate.
INET-ADDRESS-MIBInetVersion
Type Values:
0unknown
1ipv4
2ipv6
 .1.3.6.1.4.1.11.2.55.5.9.1.1
rlIgmpMldSnoopQuerierGlobalAddressType
Inet type IPv6/IPv4.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.55.5.9.1.2
rlIgmpMldSnoopQuerierGlobalAddress
The desired address to used in IGMP/MLD Snoop Querier messages if
such an address is not configured on the vlan.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.55.5.9.1.3