HPE-POE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
61

rlPethPsePortTable

table
.1.3.6.1.4.1.11.2.108.1 · 1 row entry · 24 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlPethPsePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-POE-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-POE-MIB::rlPethPsePortTable' 
The table listing additional information for Power Over Ethernet ports.
rlPethPsePortEntry row .1.3.6.1.4.1.11.2.108.1.1
An entry in the rlPethPsePortTable.
Indexes
Column Syntax OID
rlPethPsePortGroupIndex
This variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected. Group means box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices.
Furthermo…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.1
rlPethPsePortIndex
This variable uniquely identifies the power Ethernet PSE
port within group pethPsePortGroupIndex to which the
power Ethernet PSE entry is connected.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.2
rlPethPsePortOutputVoltage
This variable indicates on the output voltage level in millivolts from rlPethPsePortIndex.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.3
rlPethPsePortOutputCurrent
This variable indicates on the output current level in milliampere from rlPethPsePortIndex.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.4
rlPethPsePortOutputPower
This variable indicates on the output power level in milliwatts from rlPethPsePortIndex.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.5
rlPethPsePortPowerLimit
This variable indicates on the user configured power level in milli watts which is available from rlPethPsePortIndex.
Integer32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.6
rlPethPsePortStatus
This variable indicates on the hardware status of rlPethPsePortIndex.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.7
rlPethPsePortStatusDescription
This variable indicates the description of the hardware status of rlPethPsePortIndex.
OctetString
Constraints:
range: 0-120
 .1.3.6.1.4.1.11.2.108.1.1.8
rlPethPsePortOperPowerLimit
This variable indicates the maximum power level in milli watts which is available from rlPethPsePortIndex.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.9
rlPethPsePortTimeRangeName
This variable is used to bind PoE port to time range.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.11.2.108.1.1.10
rlPethPsePortOperStatus
This Read-Only variable indicates PoE port current status affected by time range active/inactive and admin status.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.108.1.1.11
rlPethPsePortMaxPowerAllocAllowed
This variable indicates the maximum power allocation allowed per port (including wire power loses) in milli-watts which is available from rlPethPsePortIndex.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.12
rlPethPsePortSupportPoeType
This variable indicates the supported type of the PoE port
RlPoeType
Type Values:
1none
2poe
3poeplus
4poe60w
5poeBTtype3
6poeBTtype4
 .1.3.6.1.4.1.11.2.108.1.1.13
rlPethPsePortLinkPartnerPoeType
This variable indicates the link partner PoE type.
RlPoeType
Type Values:
1none
2poe
3poeplus
4poe60w
5poeBTtype3
6poeBTtype4
 .1.3.6.1.4.1.11.2.108.1.1.14
rlPethPsePortFourPairForced
This variable enabled the spare pair ALT_B in 60W port to force 4 pair enable.
Enumerationr/w
Enumerated Values:
0forcedEnable
1forcedDisable
 .1.3.6.1.4.1.11.2.108.1.1.15
rlPethPsePortFourPairEnabled
This variable indicates that spare pair ALT_B is enable.
Enumeration
Enumerated Values:
1fourPairEnable
2fourPairDisable
 .1.3.6.1.4.1.11.2.108.1.1.16
rlPethPsePortNegotiationAllocatedPower
This variable indicates the power allocation in milli watts from power negotiation
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.17
rlPethPsePortNegotiationProtocolOwner
This variable indicates the protocol owner on power management negotiation protocol
Enumeration
Enumerated Values:
0protocolOwnerNone
1protocolOwnerCDP
2protocolOwnerLLDP
3protocolOwnerCDPExpired
4protocolOwnerLLDPExpired
 .1.3.6.1.4.1.11.2.108.1.1.18
rlPethPsePortLegacySupport
This variable identifies poe Legacy per port configuration mode
Enumerationr/w
Enumerated Values:
0not-relevant
1enabled
2disabled
 .1.3.6.1.4.1.11.2.108.1.1.19
rlPethPsePortHighPowerModeEnable
This variable identifies poe port high power configuration mode
Enumerationr/w
Enumerated Values:
0not-relevant
1enabled
2disabled
 .1.3.6.1.4.1.11.2.108.1.1.20
rlPethPsePortMenagementMode
This variable identifies poe power management mode configuration mode
Enumerationr/w
Enumerated Values:
0not-relevant
1dynamic
2static
 .1.3.6.1.4.1.11.2.108.1.1.21
rlPethPsePortStaticPowerAllocation
This variable indicates PoE Static power allocation.
Static power allocation can be configured by setting rlPethPsePortMenagementMode
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.11.2.108.1.1.22
rlPethPsePortHighPowerOpStatus
This variable identifies the poe port high power status
Enumeration
Enumerated Values:
0not-relevant
1enabled
2disabled
 .1.3.6.1.4.1.11.2.108.1.1.23
rlPethPsePortClassLimit
This variable indicates class limit for the port
Enumerationr/w
Enumerated Values:
0unlimited
3class3
4class4
5class5
6class6
7class7
 .1.3.6.1.4.1.11.2.108.1.1.24

rlPethMainPseTable

table
.1.3.6.1.4.1.11.2.108.2 · 1 row entry · 12 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlPethMainPseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-POE-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-POE-MIB::rlPethMainPseTable' 
The table listing additional read - only information for Power Over Ethernet.
rlPethMainPseEntry row .1.3.6.1.4.1.11.2.108.2.1
An entry in the rlPethMainPseTable.
Indexes
Column Syntax OID
rlPethMainPseGroupIndex
This variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected. Group means box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices.
Furthermo…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.11.2.108.2.1.1
rlPethMainPseSwVersion
This variable identifies the MCU SW version.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.11.2.108.2.1.2
rlPethMainPseHwVersionobsolete
This variable identifies the MCU HW version.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.11.2.108.2.1.3
rlPethMainPseHwType
This variable identifies the MCU HW type (enhanced, plus, none).
Enumeration
Enumerated Values:
1enhanced
2plus
3auto
4nonPoe
5enhancedPlus
6poe60w
7poeBT
 .1.3.6.1.4.1.11.2.108.2.1.4
rlPethMainPsePowerGuardBand
This variable identifies the guard band in [W] for not connecting
additional ports.
Integer32r/w
Constraints:
range: 0-254
 .1.3.6.1.4.1.11.2.108.2.1.5
rlPethMainPsePowerManagementMode
This variable identifies power management mode.
Enumerationr/w
Enumerated Values:
0portlimit
5classlimit
6maxlimit
 .1.3.6.1.4.1.11.2.108.2.1.6
rlPethMainPsedisconnectMethod
This variable identifies disconnect method.
Enumerationr/w
Enumerated Values:
0lowestpriority
1nextport
 .1.3.6.1.4.1.11.2.108.2.1.7
rlPethMainPseTemperatureSensor
This variable identifies the pd temperature sensor. 32767 (0x7FFF) represent N/A temperature
Integer32
Constraints:
range: 32767-32767
range: -200-200
 .1.3.6.1.4.1.11.2.108.2.1.8
rlPethMainPseInrushTestEnabled
This variable identifies if HW inrush test will be disabled.
by default HW inrush test is enabled.
Enumerationr/w
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.11.2.108.2.1.9
rlPethMainPseLegacyDisabled
This variable identifies poe Legacy global configuration mode
Enumerationr/w
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.11.2.108.2.1.10
rlPethMainBanksValues
This variable returns 16 power-banks of a specific switch
OctetString .1.3.6.1.4.1.11.2.108.2.1.11
rlPethMainBanksActivePowerBank
This variable returns the active power-bank of a specific switch
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.108.2.1.12

rlPethPowerPseTable

table
.1.3.6.1.4.1.11.2.108.3 · 1 row entry · 10 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlPethPowerPseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-POE-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-POE-MIB::rlPethPowerPseTable' 
The table listing additional read-write information for Power Over Ethernet - PSE side.
rlPethPowerPseEntry row .1.3.6.1.4.1.11.2.108.3.1
An entry in the rlPethPowerPseTable.
Indexes
Column Syntax OID
rlPethPowerPseGroupIndex
This variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected. Group means box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices.
Furthermo…
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.11.2.108.3.1.1
rlPethPowerPsePower
This variable identifies the maximum power in [W] supplied by PSE.
Enumerationr/w
Enumerated Values:
0none
1ps1
2ps2
3ps3
 .1.3.6.1.4.1.11.2.108.3.1.2
rlPethPowerPseRpsPower
This variable identifies the maximum power in [W] supplied by PSE + RPS.
Enumerationr/w
Enumerated Values:
0none
1rps1
2rps2
3rps3
 .1.3.6.1.4.1.11.2.108.3.1.3
rlPethPowerPsePowerManagementMode
This variable identifies power management mode.
Enumerationr/w
Enumerated Values:
0portlimit
5classlimit
6maxlimit
 .1.3.6.1.4.1.11.2.108.3.1.4
rlPethPowerPsedisconnectMethod
This variable identifies disconnect method.
Enumerationr/w
Enumerated Values:
0lowestpriority
1nextport
 .1.3.6.1.4.1.11.2.108.3.1.5
rlPethPowerPseTemperatureSensor
This variable identifies the pd temperature sensor.
Integer32
Constraints:
range: -200-200
 .1.3.6.1.4.1.11.2.108.3.1.6
rlPethPowerPseInrushTestEnabled
This variable identifies if HW inrush test will be disabled.
by default HW inrush test is enabled.
Enumerationr/w
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.11.2.108.3.1.7
rlPethPowerPseLegacyDisabled
This variable identifies poe Legacy global configuration mode
Enumerationr/w
Enumerated Values:
0enabled
1disabled
 .1.3.6.1.4.1.11.2.108.3.1.8
rlPethPowerBanksValues
This variable returns 16 power-banks of a specific switch
OctetString .1.3.6.1.4.1.11.2.108.3.1.9
rlPethPowerBanksActivePowerBank
This variable returns the active power-bank of a specific switch
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.108.3.1.10

rlPethPdPortTable

table
.1.3.6.1.4.1.11.2.108.4 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlPethPdPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-POE-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-POE-MIB::rlPethPdPortTable' 
The table listing additional read-write information for Power Over Ethernet - PD side.
rlPethPdPortEntry row .1.3.6.1.4.1.11.2.108.4.1
An entry in the rlPethPdPortTable.
Indexes
Column Syntax OID
rlPethPdPortIndex
This variable uniquely identifies the power Ethernet PD
port within group rlPethPdPortGroupIndex to which the
power Ethernet PSE entry is connected.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.108.4.1.1
rlPethPdPortSupportPoeType
This variable indicates the PoE type of the PD port (AF/AT/60W)
RlPoeType
Type Values:
1none
2poe
3poeplus
4poe60w
5poeBTtype3
6poeBTtype4
 .1.3.6.1.4.1.11.2.108.4.1.2
rlPethPdPortOperPoeType
This variable indicates the operational PoE status of the PD port
RlPoeType
Type Values:
1none
2poe
3poeplus
4poe60w
5poeBTtype3
6poeBTtype4
 .1.3.6.1.4.1.11.2.108.4.1.3
rlPethPdPortPowerRequest
This variable indicates the requested power the PD port request from the PSE in mili-Watts
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.108.4.1.4
rlPethPdPortPowerAvailable
This variable indicates the available power the PSE port offers to the PD port in mili-Watts
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.108.4.1.5
rlPethPdPortForcedMode
This variable indicates the powered PD port forced mode
RlPoeTyper/w
Type Values:
1none
2poe
3poeplus
4poe60w
5poeBTtype3
6poeBTtype4
 .1.3.6.1.4.1.11.2.108.4.1.6
rlPethPdPortNegotiationProtocolOwner
This variable indicates the protocol owner on power management negotiation protocol
Enumeration
Enumerated Values:
0protocolOwnerNone
1protocolOwnerCDP
2protocolOwnerLLDP
3protocolOwnerCDPExpired
4protocolOwnerLLDPExpired
 .1.3.6.1.4.1.11.2.108.4.1.7

rlPethPseUnitTable

table
.1.3.6.1.4.1.11.2.108.5 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlPethPseUnitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-POE-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-POE-MIB::rlPethPseUnitTable' 
The table listing additional read-write information for Power Over Ethernet unit capabilities.
rlPethPseUnitEntry row .1.3.6.1.4.1.11.2.108.5.1
An entry in the rlPethPseUnitTable.
Indexes
Column Syntax OID
rlPethUnitIndex
This variable uniquely identifies the unit id.
It means box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices.
Furthermore, the same value MUST be used in this variable,
PethPowerPseGro…
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.11.2.108.5.1.1
rlPethUnitType
This variable identifies the unit type (PSE/PD/Both/None).
Enumeration
Enumerated Values:
0unitTypeNone
1unitTypePSE
2unitTypePD
3unitTypePSEPD
 .1.3.6.1.4.1.11.2.108.5.1.2
rlPethUnitColor
This variable identifies the unit PSE status (color can be green,yellow,red).
Enumeration
Enumerated Values:
0unitColorNone
1unitColorGreen
2unitColorYellow
3unitColorRed
 .1.3.6.1.4.1.11.2.108.5.1.3

rlPethPerPseTable

table
.1.3.6.1.4.1.11.2.108.9 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rlPethPerPseTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-POE-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-POE-MIB::rlPethPerPseTable' 
The table listing additional information for Power Over Ethernet ports per PSE device.
rlPethPerPseEntry row .1.3.6.1.4.1.11.2.108.9.1
An entry in the rlPethPerPseTable.
Indexes
Column Syntax OID
rlPethPerPseGroupIndex
This variable uniquely identifies the group
containing the port to which a power Ethernet PSE is
connected. Group means box in the stack, module in a
rack and the value 1 MUST be used for non-modular devices.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.11.2.108.9.1.1
rlPethPerPseDeviceIndex
This variable uniquely identifies the PSE device within the group.
Integer32
Constraints:
range: 0-15
 .1.3.6.1.4.1.11.2.108.9.1.2
rlPethPerPseTemperatureValue
This variable represents temperature reported from PSE device. 32767 (0x7FFF) represent N/A temperature
Integer32
Constraints:
range: 32767-32767
range: -200-200
 .1.3.6.1.4.1.11.2.108.9.1.3
rlPethPerPseHwRevision
This variable identifies the PSE HW revision. String '0x0' represent N/A HW revision.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.11.2.108.9.1.4
rlPethPerPseVopStatus
Specifies status of VoP problem in PoE device
Enumeration
Enumerated Values:
0deviceOk
1detectionError
2classificationError
3legacyError
4undefinedState
 .1.3.6.1.4.1.11.2.108.9.1.5