HPE-NLP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
7

hpeNLPServerPortTable

table
.1.3.6.1.4.1.11.5.7.5.8.1.4060.5 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpeNLPServerPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-NLP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-NLP-MIB::hpeNLPServerPortTable' 
Port Table contains the Networking Loop Protection features status and control parameters.
hpeNLPServerPortEntry row .1.3.6.1.4.1.11.5.7.5.8.1.4060.5.1
An entry contains the configurable parameters of Network Loop Protection feature on the port
Indexes
Column Syntax OID
hpeNLPServerPortNumber
This object specifies the Port number of the chassis for which the configuration entry applies.
Unsigned32
Constraints:
range: 1-60
 .1.3.6.1.4.1.11.5.7.5.8.1.4060.5.1.1
hpeNLPServerPortResetLoopDetection
This object reset the loop detected state and move the port to forwarding state. Setting TRUE to this objects reset the loop detection and return the object with FALSE value. This object always returns FALSE on read
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.5.7.5.8.1.4060.5.1.2
hpeNLPServerPortEnableTrap
This object enables the SNMP traps which send traps on detecting loop on the specified downlink or service ports. hpeNLPEnableTrap is the superset of this object. Setting hpeNLPEnableTrap to TRUE enables trap on all the…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.11.5.7.5.8.1.4060.5.1.3

hpeNLPServerPortStats

table
.1.3.6.1.4.1.11.5.7.5.8.1.4060.6 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpeNLPServerPortStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HPE-NLP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HPE-NLP-MIB::hpeNLPServerPortStats' 
Table contains the counters and other statistics of Network Loop Protection Feature of the port.
hpeNLPServerPortStatsEntry row .1.3.6.1.4.1.11.5.7.5.8.1.4060.6.1
An entry contains the counters and other statistics of Network Loop Protection Feature of the port.
Indexes
Column Syntax OID
hpeNLPStatsPortNumber
This object specifies the Port number of the chassis for which the statistics is retrieved. This index mapped to hpeNLPServerPortNumber
Unsigned32
Constraints:
range: 1-60
 .1.3.6.1.4.1.11.5.7.5.8.1.4060.6.1.1
hpeNLPLoopDetectedStatus
This object identifies whether loop detected on the port
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.11.5.7.5.8.1.4060.6.1.2
hpeNLPLoopDetectedCount
This object signifies the number of Loop Protection Frames received on the port that causes the port moved to BLOCKING state.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.5.7.5.8.1.4060.6.1.3
hpeNLPLastLoopDetectTimeStamp
This object logged the last time stamp value of Loop Protection Frames received on the port that causes the port moved to BLOCKING state.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.5.7.5.8.1.4060.6.1.4