HPE-BRIDGE-SECURITY Table View

The table specifies all DHCP Snoop Static (configured by user) entries.
The entry contains a local IP address of the DHCP client, a Port interface to which a DHCP client is connected to the switch.

rlIpDhcpSnoopStaticEntry row .1.3.6.1.4.1.11.2.112.1.10.1

The row definition for this table.

Indexes

rlIpDhcpSnoopStaticVLANTag rlIpDhcpSnoopStaticMACAddress

Column	Syntax	OID
rlIpDhcpSnoopStaticVLANTag A DHCP Snoop Static entry vlan tag.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.112.1.10.1.1
rlIpDhcpSnoopStaticMACAddress A DHCP Snoop Static entry mac address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.112.1.10.1.2
rlIpDhcpSnoopStaticIPAddress A DHCP Snoop Static entry IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.112.1.10.1.3
rlIpDhcpSnoopStaticPortInterface A DHCP Snoop Static entry Port interface.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.112.1.10.1.4
rlIpDhcpSnoopStaticRowStatus A status can be destroy, active or createAndGo	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.112.1.10.1.5

DHCP Snoop entry. Use to add/delete a dynamic entries and to view all entries (dynamic and static)

rlIpDhcpSnoopEntry row .1.3.6.1.4.1.11.2.112.1.11.1

The row definition for this table.

Indexes

rlIpDhcpSnoopVLANTag rlIpDhcpSnoopMACAddress

Column	Syntax	OID
rlIpDhcpSnoopVLANTag A DHCP Snoop entry vlan tag.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.112.1.11.1.1
rlIpDhcpSnoopMACAddress A DHCP Snoop entry mac address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.112.1.11.1.2
rlIpDhcpSnoopType A DHCP Snoop entry type: static or dynamic.	RlIpDhcpSnoopTyper/w Type Values: 1 learnedByProtocol 2 deletedByTimeout 3 static	.1.3.6.1.4.1.11.2.112.1.11.1.3
rlIpDhcpSnoopLeaseTime A DHCP Snoop lease time. For static entry the lease time is 0xFFFFFFFF	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.112.1.11.1.4
rlIpDhcpSnoopIPAddress The IP address of the DHCP client referred to in this table entry.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.112.1.11.1.5
rlIpDhcpSnoopPortInterface Identifies the port Interface ifindex, which connected to DHCP client identified with the entry.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.112.1.11.1.6
rlIpDhcpSnoopRowStatus Entry status. A valid status is CreateandGo or Delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.112.1.11.1.7

An Ip Dhcp Snooping enabled VLAN table.

rlIpDhcpSnoopEnableVlanEntry row .1.3.6.1.4.1.11.2.112.1.12.1

An Ip Dhcp Snooping enabled VLAN entry.

Indexes

rlIpDhcpSnoopEnableVlanTag

Column	Syntax	OID
rlIpDhcpSnoopEnableVlanTag A DHCP Snoop entry vlan tag.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.112.1.12.1.1
rlIpDhcpSnoopEnableVlanRowStatus Entry status. A valid status is CreateandGo and Delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.112.1.12.1.2

DHCP Snoop Trusted ports entry. The entry created when port is configured as trusted.

rlIpDhcpSnoopTrustedPortEntry row .1.3.6.1.4.1.11.2.112.1.13.1

The row definition for this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rlIpDhcpSnoopTrustedPortRowStatus Entry status. A valid status is CreateandGo or Delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.112.1.13.1.2

IP Source Guard ports entry. The entry created when IP Source Guard
enabled on port.

rlIpSourceGuardPortEntry row .1.3.6.1.4.1.11.2.112.2.5.1

The row definition for this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rlIpSourceGuardPortRowStatus Entry status. A valid status is CreateAndGo or Delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.112.2.5.1.2

IP Source Guard entry. Use to view all entries (dynamic and static)

rlIpSourceGuardEntry row .1.3.6.1.4.1.11.2.112.2.6.1

The row definition for this table.

Indexes

IF-MIBifIndex rlIpSourceGuardIPAddress rlIpSourceGuardVLANTag

Column	Syntax	OID
rlIpSourceGuardIPAddress The IP address of the Ip Source Guard entry.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.11.2.112.2.6.1.1
rlIpSourceGuardVLANTag A Ip Source Guard entry vlan tag.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.112.2.6.1.2
rlIpSourceGuardMACAddress A Ip Source Guard entry mac address	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.112.2.6.1.3
rlIpSourceGuardType A Ip Source Guard entry type: static or dynamic.	RlIpSourceGuardType Type Values: 1 dynamic 2 static	.1.3.6.1.4.1.11.2.112.2.6.1.4
rlIpSourceGuardStatus Identifies the status of Ip Source Guard entry.	RlIpSourceGuardStatus Type Values: 1 active 2 inactive	.1.3.6.1.4.1.11.2.112.2.6.1.5
rlIpSourceGuardFailReason Identifies the reason for in-activity of Ip Source Guard entry.	RlIpSourceGuardFailReason Type Values: 1 noProblem 2 noResource 3 noSnoopVlan 4 trustPort	.1.3.6.1.4.1.11.2.112.2.6.1.6

The table includes, per vlan, the IP Source Guard permitted rules counters.

rlIpSourceGuardPermittedRuleCounterEntry row .1.3.6.1.4.1.11.2.112.2.7.1

The row definition for this table.

Indexes

rlIpSourceGuardPermittedRuleCounterVLANTag

Column	Syntax	OID
rlIpSourceGuardPermittedRuleCounterVLANTag Ip Source Guard permitted rules counters entry Vlan tag.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.112.2.7.1.1
rlIpSourceGuardPermittedRuleCounterNumOfStaticRules Number of static rules added by IP Source Guard for the permitted Hosts	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.112.2.7.1.2
rlIpSourceGuardPermittedRuleCounterNumOfDhcpRules Number of rules added by IP Source Guard for the permitted Hosts, as a result of DHCP Snooping dynamic information.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.112.2.7.1.3

The table specifies all ARP Inspection List entries.
The entry contains a list name, list IP address, a list Mac address.

rlIpArpInspectListEntry row .1.3.6.1.4.1.11.2.112.3.5.1

The row definition for this table.

Indexes

rlIpArpInspectListName rlIpArpInspectListIPAddress

Column	Syntax	OID
rlIpArpInspectListName The Name of the Access List.	RlIpArpInspectListNameType Type Constraints: range: 1..32	.1.3.6.1.4.1.11.2.112.3.5.1.1
rlIpArpInspectListIPAddress ARP Inspection List IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.11.2.112.3.5.1.2
rlIpArpInspectListMACAddress ARP Inspection List mac address	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.112.3.5.1.3
rlIpArpInspectListRowStatus A status can be destroy, active or createAndGo	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.112.3.5.1.4

An Ip ARP Inspection enabled VLAN table.

rlIpArpInspectEnableVlanEntry row .1.3.6.1.4.1.11.2.112.3.6.1

An Ip ARP Inspection enabled VLAN entry.

Indexes

rlIpArpInspectEnableVlanTag

Column	Syntax	OID
rlIpArpInspectEnableVlanTag An Ip ARP Inspection entry vlan tag.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.112.3.6.1.1
rlIpArpInspectAssignedListName An Ip ARP Inspection assigned ACL name.	RlIpArpInspectListNameTyper/w Type Constraints: range: 1..32	.1.3.6.1.4.1.11.2.112.3.6.1.2
rlIpArpInspectEnableVlanRowStatus Entry status. A valid status is CreateandGo and Delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.112.3.6.1.3
rlIpArpInspectVlanNumOfArpForwarded Total number of forwarded ARP packets, packets which were validated by ARP inspection	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.112.3.6.1.4
rlIpArpInspectVlanNumOfArpDropped Number of dropped ARP packets, which were validated by ARP inspection (mismatch , not-found and dropped for any reason)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.112.3.6.1.5
rlIpArpInspectVlanNumOfArpMismatched Number of dropped ARP packets, which were validated by ARP inspection and inconsistency was found for IP and MAC (mismatch)	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.112.3.6.1.6
rlIpArpInspectVlanClearCountersAction If true, clear (set to zero) all Arp Inspection counters: rlIpArpInspectVlanNumOfArpForwarded , rlIpArpInspectVlanNumOfArpDropped and rlIpArpInspectVlanNumOfArpMismatched	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.112.3.6.1.7

ARP Inspection Trusted ports entry. The entry created when port is configured as trusted.

rlIpArpInspectTrustedPortEntry row .1.3.6.1.4.1.11.2.112.3.7.1

The row definition for this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rlIpArpInspectTrustedPortRowStatus Entry status. A valid status is CreateandGo or Delete.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.112.3.7.1.2

Protocol filter configuration entry

rlProtocolFilteringEntry row .1.3.6.1.4.1.11.2.112.4.1.1

The row definition for this table.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rlProtocolFilteringList The list of protocol to be filtered.	ProtocolFilteringMapr/w Type Values: 0 all 1 cdp 2 vtp 3 dtp 4 udld 5 pagp 6 sstp	.1.3.6.1.4.1.11.2.112.4.1.1.1
rlProtocolFilteringRowStatus A status can be destroy, active or createAndGo	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.112.4.1.1.2

Protocol filter configuration entry

rlIpDhcpOpt82SuboptionConfigEntry row .1.3.6.1.4.1.11.2.112.5.2.1

The row definition for this table.

Indexes

rlIpDhcpOpt82SuboptionConfigIndex

Column	Syntax	OID
rlIpDhcpOpt82SuboptionConfigIndex Entry index. Must be 1	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.112.5.2.1.1
rlIpDhcpOpt82SuboptionConfigCircuitIdPayloadLength Returns CircuitId payload length.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.112.5.2.1.2
rlIpDhcpOpt82SuboptionConfigCircuitIdFormat Defines the CircuitId format. Default is an empty string. Empty string means that CircuitId is added in a default format. Non-empty string AND true value of rlIpDhcpOpt82SuboptionConfigCircuitIdSupported Scalar means th…	OctetStringr/w Constraints: range: 0-160	.1.3.6.1.4.1.11.2.112.5.2.1.3
rlIpDhcpOpt82SuboptionConfigRemoteIdPayloadLength Returns RemoteId payload length.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.112.5.2.1.4
rlIpDhcpOpt82SuboptionConfigRemoteIdFormat Defines the RemoteId format. Default is an empty string. Empty string means that RemoteId is added in a default format. Non-empty string AND true value of rlIpDhcpOpt82SuboptionConfigRemoteIdSupported Scalar means that …	OctetStringr/w Constraints: range: 0-160	.1.3.6.1.4.1.11.2.112.5.2.1.5
rlIpDhcpOpt82SuboptionConfigNumericTokenFormat Defines the format of numeric tokens included in the Circuit-id and Remote-ID sub-options string.	Enumerationr/w Enumerated Values: 1 hex 2 ascii	.1.3.6.1.4.1.11.2.112.5.2.1.6
rlIpDhcpOpt82SuboptionConfigCircuitIdAuxFailFlag Defines whatever to fail the CircuitId Suboption configuration	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.112.5.2.1.7

The table specifies option 82 content.

rlIpDhcpOpt82SuboptionContentEntry row .1.3.6.1.4.1.11.2.112.5.3.1

The row definition for this table.

Indexes

rlIpDhcpOpt82SuboptionContentIfIndex rlIpDhcpOpt82SuboptionContentVlanTag

Column	Syntax	OID
rlIpDhcpOpt82SuboptionContentIfIndex The port's interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.11.2.112.5.3.1.1
rlIpDhcpOpt82SuboptionContentVlanTag The VLAN identifier.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.11.2.112.5.3.1.2
rlIpDhcpOpt82SuboptionContentCircuitIdHeader Specifies option 82 CircuitId suboption header content per interface/port	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.11.2.112.5.3.1.3
rlIpDhcpOpt82SuboptionContentCircuitIdPayload160 Specifies option 82 CircuitId suboption payload first 160 bytes content per interface/port	OctetString	.1.3.6.1.4.1.11.2.112.5.3.1.4
rlIpDhcpOpt82SuboptionContentCircuitIdPayload320 Specifies option 82 CircuitId suboption payload second 160 bytes content per interface/port	OctetString	.1.3.6.1.4.1.11.2.112.5.3.1.5
rlIpDhcpOpt82SuboptionContentRemoteIdHeader Specifies option 82 RemoteId suboption header content per interface/port	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.11.2.112.5.3.1.6
rlIpDhcpOpt82SuboptionContentRemoteIdPayload160 Specifies option 82 RemoteId suboption payload first 160 bytes content per interface/port	OctetString	.1.3.6.1.4.1.11.2.112.5.3.1.7
rlIpDhcpOpt82SuboptionContentRemoteIdPayload320 Specifies option 82 RemoteId suboption payload second 160 bytes content per interface/port	OctetString	.1.3.6.1.4.1.11.2.112.5.3.1.8

The table specifies option 82 content.

rlIpDhcpOpt82SuboptionTokenEntry row .1.3.6.1.4.1.11.2.112.5.4.1

The row definition for this table.

Indexes

rlIpDhcpOpt82SuboptionTokenName

Column	Syntax	OID
rlIpDhcpOpt82SuboptionTokenName Token have meaningful and pre-determined names based on the information they represent. A $ symbol is placed before and after the Token name ($token-name$).	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.11.2.112.5.4.1.1
rlIpDhcpOpt82SuboptionTokenValue Token description.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.11.2.112.5.4.1.2
rlIpDhcpOpt82SuboptionTokenFormat Token format.	Enumeration Enumerated Values: 1 hex 2 ascii 3 config	.1.3.6.1.4.1.11.2.112.5.4.1.3
rlIpDhcpOpt82SuboptionTokenReservedLength Token reserved length.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.112.5.4.1.4
rlIpDhcpOpt82SuboptionTokenHexaLength If format is config, the hexa length is returned. Otherwise 0.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.112.5.4.1.5