HP-VLAN Table View

Table-centric layout grouping table, row, and column objects.

Tables
4
Rows
4
Columns
12

hpVlanIdentTable

table deprecated
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpVlanIdentTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-VLAN' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-VLAN::hpVlanIdentTable'
A table describing the various VLANs that 
are currently defined for this device.
hpVlanIdentEntry row .1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1
The row in the hpVlanIdentTable containing
the general VLAN information.
Column Syntax OID
The VLAN ID which uniquely identifies a row
in this table.
VlanID
Type Constraints:
range: 1..65535
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.1
hpVlanIdentNamedeprecated
The user defined textual name that is
associated with this VLAN.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.2
hpVlanIdentModedeprecated
The mode of this VLAN. A VLAN can be either
port-based or MAC address-based. A port-based
VLAN supports a multiple addresses per VLAN
port.

A MAC address-based VLAN supports multiple MAC
addresses per po…
Enumeration
Enumerated Values:
1port
2mac
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.3
The status of a VLAN information entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.4
hpVlanDot1QIDdeprecated
The VLAN tag ID. 802.1Q
Integer32r/w
Constraints:
range: 1-4095
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.5
Current state of the VLAN. If one port in the
VLAN is up, then that VLAN is up, otherwise it
is down.
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.6
hpVlanIdentTypedeprecated
Type of VLAN:
static - VLAN is user-configured; configuration
information is retained in configuration file and
thus such VLANs are available across reboots.
dynamic - VLAN is managed by GVRP; configuration
inform…
Enumerationr/w
Enumerated Values:
1static
2dynamic
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.4.1.7

hpVlanMemberTable

table deprecated
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpVlanMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-VLAN' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-VLAN::hpVlanMemberTable'
A table describing the members of the various  
VLANs that are currently defined for this device.
Interfaces can be associated with a pre-defined
VLAN (i.e., VLANs can be created by grouping
existing interfaces) by adding rows to this table.
Likewise, deleting rows from this table removes
the specified interface from the VLAN. 
          
Note that certain entries in this table will
automatically be created when a VLAN is created,
such as the entry associating a VLAN with its
propVirtual interface to the management and/or
forwarding entity on the device. These entries
are read-only and can not be manipulated via
the MIB.
hpVlanMemberEntry row .1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5.1
The row in the hpVlanMemberTable containing the
VLAN ID to Interface Group ifIndex mappings.
Column Syntax OID
The ifIndex value which uniquely identifies
a row in the Interfaces Table. The corresponding
row in the Interfaces Table must exist prior
to the index being used in this table.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5.1.1
The VLAN ID identifies the VLAN the interface
is in. The corresponding row in the VLAN Ident
Table must exist prior to the index being used
in this table.
VlanIDr/w
Type Constraints:
range: 1..65535
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.5.1.2

hpVlanAddrTable

table deprecated
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpVlanAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-VLAN' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-VLAN::hpVlanAddrTable'
A table describing the MAC addresses that
are currently associated with a specific
VLAN. Entries are added to and deleted
from this read-only table automatically
as they are learned from the network.
hpVlanAddrEntry row .1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6.1
The row in the hpVlanAddrTable containing
the VLAN ID to MAC address mappings.
Indexes
Column Syntax OID
hpVlanAddrIndexdeprecated
The VLAN ID which uniquely identifies a row
in the VLAN Ident Table. The corresponding
row in the VLAN Ident Table must exist prior
to the index being present in this table.
VlanID
Type Constraints:
range: 1..65535
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6.1.1
The MAC address of a node that is associated
with a specific VLAN as identified by the
object hpVlanAddrIndex.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.6.1.2

hpVlanMemberTable2

table deprecated
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.8 · 1 row entry · 1 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpVlanMemberTable2
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-VLAN' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-VLAN::hpVlanMemberTable2'
A table describing the VLANs on each particular port
along with tagging information.
hpVlanMemberEntry2 row .1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.8.1
The row in the hpVlanMemberTable2 containing the
VLAN ID to interface group ifIndex mappings as well
the VLAN tagging information.
Column Syntax OID
Identifies whether the particular VLan on this
port is tagged or not. 'no' denotes not a member
of that vlan. 'auto' denotes that GVRP will
dynamically determine the membership of this port.
Enumerationr/w
Enumerated Values:
1tagged
2untagged
3no
4auto
.1.3.6.1.4.1.11.2.14.11.5.1.3.1.1.8.1.1