HP-SN-OSPF-GROUP-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
14
Rows
14
Columns
162
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1
·
1 row entry
·
5 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfAreaTable'
Information describing the configured parameters and cumulative statistics of the router's attached areas.
Information describing the configured parameters and
cumulative statistics of one of the router's attached
areas.
cumulative statistics of one of the router's attached
areas.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfAreaIdmandatory A 32-bit integer uniquely identifying an area. AreaID 0.0.0.0 is used for the OSPF backbone. | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.1 | ||||||||||
snOspfImportASExternmandatory The area's support for importing AS external link-state advertisements. 0: Stub Area Type 1: Normal Area Type 2: NSSA Area Type | Integer32r/w Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.2 | ||||||||||
snOspfStubMetricmandatory The metric value applied at the default type ofservice(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snO… | BigMetricr/w Type Constraints: range: 0..16777215 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.3 | ||||||||||
snOspfAreaRowStatusmandatory This object is used to create anddelete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting r… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.4 | ||||||||||
snOspfAreaIdFormatmandatory This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.2.1.1.5 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1
·
1 row entry
·
5 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfAreaRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfAreaRangeTable'
A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255
A range if IP addresses specified by an IP address/IP
network mask pair. For example, class B address range
of X.X.X.X with a network mask of 255.255.0.0 includes
all IP addresses from X.X.0.0 to X.X.255.255
network mask pair. For example, class B address range
of X.X.X.X with a network mask of 255.255.0.0 includes
all IP addresses from X.X.0.0 to X.X.255.255
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfAreaRangeAreaIDmandatory The Area the Address Range is to be found within. | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.1 | ||||||||||
snOspfAreaRangeNetmandatory The IP Address of the Net or Subnet indicated by therange. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.2 | ||||||||||
snOspfAreaRangeMaskmandatory The Subnet Mask that pertains to the Net or Subnet. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.3 | ||||||||||
snOspfAreaRangeRowStatusmandatory This object is used to create anddelete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting r… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.4 | ||||||||||
snOspfAreaRangeAreaIdFormatmandatory This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.3.1.1.5 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1
·
1 row entry
·
20 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfIfTable'
The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
The OSPF Interface Entry describes one interface from
the viewpoint of OSPF.
the viewpoint of OSPF.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfIfPortobsolete The physical router port of this OSPF interface. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.1 | ||||||||||
snOspfIfAreaIdobsolete A 32-bit integer uniquely identifying the area towhich the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. | AreaIDr/w | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.2 | ||||||||||
snOspfIfAdminStatobsolete The OSPF interface's administrative status. The value'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'di… | RtrStatusr/w Type Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.3 | ||||||||||
snOspfIfRtrPriorityobsolete The priority of this interface. Used in multi-accessnetworks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on t… | DesignatedRouterPriorityr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.4 | ||||||||||
snOspfIfTransitDelayobsolete The estimated number of seconds it takes to transmit alink- state update packet over this interface. | UpToMaxAger/w Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.5 | ||||||||||
snOspfIfRetransIntervalobsolete The number of seconds between link-state advertisementretransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. | UpToMaxAger/w Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.6 | ||||||||||
snOspfIfHelloIntervalobsolete The length of time, in seconds, between the Hellopackets that the router sends on the interface. This value must be the same for all routers attached to a common network. | HelloRanger/w Type Constraints: range: 1..65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.7 | ||||||||||
snOspfIfRtrDeadIntervalobsolete The number of seconds that a router's Hello packetshave not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers att… | PositiveIntegerr/w Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.8 | ||||||||||
snOspfIfAuthTypeobsolete The authentication type specified for an interface.Additional authentication types may be assigned locally on a per interface basis. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.9 | ||||||||||
snOspfIfAuthKeyobsolete The Authentication Key. If the Area's AuthorizationType is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfAuthKey a… | OctetStringr/w Constraints: range: 0-8 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.10 | ||||||||||
snOspfIfMetricValueobsolete The metric of using this type of service onthis interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.11 | ||||||||||
snOspfIfRowStatusobsolete This object is used to create anddelete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting r… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.12 | ||||||||||
snOspfIfMd5AuthKeyIdobsolete The md5 authentication key ID. If the snOspfVirtIfAuthTypeis set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appe… | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.13 | ||||||||||
snOspfIfMd5AuthKeyobsolete The MD5 Authentication Key. If the Area's AuthorizationType is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an… | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.14 | ||||||||||
snOspfIfMd5ActivationWaitTimeobsolete The md5 authentication key activation wait time is specified in secondand the maximum wait time is 14400 seconds (4 hours). | Integer32r/w Constraints: range: 0-14400 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.15 | ||||||||||
snOspfIfAreaIdFormatobsolete This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.16 | ||||||||||
snOspfIfPassiveModeobsolete This object control the passive mode of this interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.17 | ||||||||||
snOspfIfDatabaseFilterAllOutobsolete This object control the filtering of outgoing OSPF LSA on this interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.18 | ||||||||||
snOspfIfMtuIgnoreobsolete This object control MTU detection mode of this interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.19 | ||||||||||
snOspfIfNetworkP2mpobsolete This object enable/disable P2MP mode of this interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.1.1.20 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2
·
1 row entry
·
20 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfIf2Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfIf2Table'
The OSPF Interface Table describes the interfaces from the viewpoint of OSPF.
The OSPF Interface Entry describes one interface from
the viewpoint of OSPF.
the viewpoint of OSPF.
Indexes
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfIf2Portmandatory The physical router port of this OSPF interface. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.1 | ||||||||||
snOspfIf2AreaIdmandatory A 32-bit integer uniquely identifying the area towhich the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. | AreaIDr/w | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.2 | ||||||||||
snOspfIf2AdminStatmandatory The OSPF interface's administrative status. The value'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'di… | RtrStatusr/w Type Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.3 | ||||||||||
snOspfIf2RtrPrioritymandatory The priority of this interface. Used in multi-accessnetworks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on t… | DesignatedRouterPriorityr/w Type Constraints: range: 0..255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.4 | ||||||||||
snOspfIf2TransitDelaymandatory The estimated number of seconds it takes to transmit alink- state update packet over this interface. | UpToMaxAger/w Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.5 | ||||||||||
snOspfIf2RetransIntervalmandatory The number of seconds between link-state advertisementretransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. | UpToMaxAger/w Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.6 | ||||||||||
snOspfIf2HelloIntervalmandatory The length of time, in seconds, between the Hellopackets that the router sends on the interface. This value must be the same for all routers attached to a common network. | HelloRanger/w Type Constraints: range: 1..65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.7 | ||||||||||
snOspfIf2RtrDeadIntervalmandatory The number of seconds that a router's Hello packetshave not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers att… | PositiveIntegerr/w Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.8 | ||||||||||
snOspfIf2AuthTypemandatory The authentication type specified for an interface.Additional authentication types may be assigned locally on a per interface basis. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.9 | ||||||||||
snOspfIf2AuthKeymandatory The Authentication Key. If the Area's AuthorizationType is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIf2AuthKey … | OctetStringr/w Constraints: range: 0-8 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.10 | ||||||||||
snOspfIf2MetricValuemandatory The metric of using this type of service onthis interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. | Integer32r/w Constraints: range: 1-65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.11 | ||||||||||
snOspfIf2RowStatusmandatory This object is used to create anddelete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting r… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.12 | ||||||||||
snOspfIf2Md5AuthKeyIdmandatory The md5 authentication key ID. If the snOspfVirtIfAuthTypeis set to md5, the value of snOspfIf2Md5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest app… | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.13 | ||||||||||
snOspfIf2Md5AuthKeymandatory The MD5 Authentication Key. If the Area's AuthorizationType is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIf2Md5AuthKey always returns a… | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.14 | ||||||||||
snOspfIf2Md5ActivationWaitTimemandatory The md5 authentication key activation wait time is specified in secondand the maximum wait time is 14400 seconds (4 hours). | Integer32r/w Constraints: range: 0-14400 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.15 | ||||||||||
snOspfIf2AreaIdFormatmandatory This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.16 | ||||||||||
snOspfIf2PassiveModemandatory This object control the passive mode of this interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.17 | ||||||||||
snOspfIf2DatabaseFilterAllOutmandatory This object control the filtering of outgoing OSPF LSA on this interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.18 | ||||||||||
snOspfIf2MtuIgnoremandatory This object control MTU detection mode of this interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.19 | ||||||||||
snOspfIf2NetworkP2mpmandatory This object enable/disable P2MP mode of this interface. | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.4.2.1.20 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1
·
1 row entry
·
13 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfVirtIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfVirtIfTable'
Information about this router's virtual interfaces.
Information about a single Virtual Interface.
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfVirtIfAreaIDmandatory The Transit Area that the Virtual Link traverses. Bydefinition, this is not 0.0.0.0 | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.1 | ||||||||||
snOspfVirtIfNeighbormandatory The Router ID of the Virtual Neighbor. | RouterID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.2 | ||||||||||
snOspfVirtIfTransitDelaymandatory The estimated number of seconds it takes to transmit alink- state update packet over this interface. | UpToMaxAger/w Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.3 | ||||||||||
snOspfVirtIfRetransIntervalmandatory The number of seconds between link-state advertisementretransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This… | UpToMaxAger/w Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.4 | ||||||||||
snOspfVirtIfHelloIntervalmandatory The length of time, in seconds, between the Hellopackets that the router sends on the interface. This value must be the same for the virtual neighbor. | HelloRanger/w Type Constraints: range: 1..65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.5 | ||||||||||
snOspfVirtIfRtrDeadIntervalmandatory The number of seconds that a router's Hello packetshave not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual nei… | PositiveIntegerr/w Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.6 | ||||||||||
snOspfVirtIfAuthTypemandatory The authentication type specified for an interface.Additional authentication types may be assigned locally on a per interface basis. | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.7 | ||||||||||
snOspfVirtIfAuthKeymandatory If Authentication Type is simplePassword, the devicewill left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero. | OctetStringr/w Constraints: range: 0-8 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.8 | ||||||||||
snOspfVirtIfRowStatusmandatory This object is used to create anddelete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting r… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.9 | ||||||||||
snOspfVirtIfMd5AuthKeyIdmandatory The md5 authentication key ID. If the snOspfVirtIfAuthTypeis set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest … | Integer32r/w Constraints: range: 0-255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.10 | ||||||||||
snOspfVirtIfMd5AuthKeymandatory The MD5 Authentication Key. If the Area's AuthorizationType is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey al… | OctetStringr/w Constraints: range: 0-16 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.11 | ||||||||||
snOspfVirtIfMd5ActivationWaitTimemandatory The md5 authentication key activation wait time is specified in secondand the maximum wait time is 14400 seconds (4 hours). | Integer32r/w Constraints: range: 0-14400 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.12 | ||||||||||
snOspfVirtIfAreaIdFormatmandatory This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.13 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1
·
1 row entry
·
10 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfRedisTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfRedisTable'
The OSPF Redistribution Table contains a list of routes that could be imported into the OSPF domain.
The OSPF Redistribution Entry specifies a particular RIP
or Static route to be imported into the OSPF domain.
or Static route to be imported into the OSPF domain.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfRedisIndexmandatory The destination IP address that associates with this particular route. | Integer32 Constraints: range: 1-64 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.1 | ||||||||||||
snOspfRedisIpAddressmandatory The destination IP address that associates with this particular route. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.2 | ||||||||||||
snOspfRedisMaskmandatory The Subnet Mask that pertains to this route. | RFC1155-SMIIpAddressr/w Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.3 | ||||||||||||
snOspfRedisActionmandatory The action to be taken if the route match this entry. noImport(0): - the route is NOT imported into OSPF Domain. import(1): - the route is imported into OSPF Domain as external type … | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.4 | ||||||||||||
snOspfRedisProtocolmandatory The imported routes into OSPF domain is set in the following: rip(1): - the RIP route. all(2): - all protocol route. static(3): - the static route. bgp(4): - the BGP route. connected(5): - the connected route. isis… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.5 | ||||||||||||
snOspfRedisSetOspfMetricmandatory The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the OSPF metric field. enabled(1): - the route metric matches the OSPF m… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.6 | ||||||||||||
snOspfRedisOspfMetricValuemandatory The metric of using OSPF Metric value on this route. | Metricr/w Type Constraints: range: 0..65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.7 | ||||||||||||
snOspfRedisMatchRipMetricmandatory The value indicates to which the route metric should match: disabled(0): - the route metric does NOT match the RIP metric field. enabled(1): - the route metric matches the RIP met… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.8 | ||||||||||||
snOspfRedisRipMetricValuemandatory The metric of using RIP Metric value (1 to 15 hops) on this route. | Integer32r/w Constraints: range: 1-15 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.9 | ||||||||||||
snOspfRedisRowStatusmandatory This object is used to create anddelete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting r… | Enumerationr/w Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.6.1.1.10 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1
·
1 row entry
·
10 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfNbrTable'
A table of non-virtual neighbor information.
The information regarding a single neighbor.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfNbrEntryIndexmandatory The table entry index of this neighbor. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.1 | ||||||||||||||||
snOspfNbrPortmandatory The physical port of this neighbor. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.2 | ||||||||||||||||
snOspfNbrIpAddrmandatory The IP address of this neighbor. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.3 | ||||||||||||||||
snOspfNbrIndexmandatory The neighbor index of each port and each IP address. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.4 | ||||||||||||||||
snOspfNbrRtrIdmandatory A 32-bit integer (represented as a type IpAddress)uniquely identifying the neighboring router in the Autonomous System. | RouterID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.5 | ||||||||||||||||
snOspfNbrOptionsmandatory A Bit Mask corresponding to the neighbor's op-tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all … | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.6 | ||||||||||||||||
snOspfNbrPrioritymandatory The priority of this neighbor in the designat-ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network. | DesignatedRouterPriority Type Constraints: range: 0..255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.7 | ||||||||||||||||
snOspfNbrStatemandatory The State of the relationship with this Neigh-bor. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.8 | ||||||||||||||||
snOspfNbrEventsmandatory The number of times this neighbor relationshiphas changed state, or an error has occurred. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.9 | ||||||||||||||||
snOspfNbrLsRetransQLenmandatory The current length of the retransmissionqueue. | RFC1155-SMIGauge Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.7.1.1.10 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1
·
1 row entry
·
9 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfVirtNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfVirtNbrTable'
A table of virtual neighbor information.
Virtual neighbor information.
Indexes
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfVirtNbrEntryIndexmandatory The table entry index of this virtual neighbor. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.1 | ||||||||||||||||
snOspfVirtNbrAreamandatory The Transit Area Identifier. | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.2 | ||||||||||||||||
snOspfVirtNbrRtrIdmandatory A 32-bit integer uniquely identifying the neighboringrouter in the Autonomous System. | RouterID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.3 | ||||||||||||||||
snOspfVirtNbrIpAddrmandatory The IP address this Virtual Neighbor is using. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.4 | ||||||||||||||||
snOspfVirtNbrOptionsmandatory A bit map corresponding to the neighbor's optionsfield. Thus, Bit 1, if set, indicates that the neighbor supports Type of Service Routing; if zero, no metrics other than TOS 0 are in use by the neighbor. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.5 | ||||||||||||||||
snOspfVirtNbrStatemandatory The state of the Virtual Neighbor Relationship. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.6 | ||||||||||||||||
snOspfVirtNbrEventsmandatory The number of times this virtual link has changed itsstate, or an error has occurred. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.7 | ||||||||||||||||
snOspfVirtNbrLSRetransQLenmandatory The current length of the retransmission queue. | RFC1155-SMIGauge Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.8 | ||||||||||||||||
snOspfVirtNbrAreaIdFormatmandatory This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.8.1.1.9 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1
·
1 row entry
·
10 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfLsdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfLsdbTable'
The OSPF Process's Links State Database.
A single Link State Advertisement.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfLsdbEntryIndexmandatory The table entry index of this Link State Database. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.1 | ||||||||||||||||||||
snOspfLsdbAreaIdmandatory The 32 bit identifier of the Area from which the LSAwas received. | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.2 | ||||||||||||||||||||
snOspfLsdbTypemandatory The type of the link state advertisement. Each linkstate type has a separate advertisement format. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.3 | ||||||||||||||||||||
snOspfLsdbLsIdmandatory The Link State ID is an LS Type Specific fieldcontaining either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.4 | ||||||||||||||||||||
snOspfLsdbRouterIdmandatory The 32 bit number that uniquely identifies theoriginating router in the Autonomous System. | RouterID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.5 | ||||||||||||||||||||
snOspfLsdbSequencemandatory The sequence number field is a signed 32-bit integer.It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent… | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.6 | ||||||||||||||||||||
snOspfLsdbAgemandatory This field is the age of the link state advertisementin seconds. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.7 | ||||||||||||||||||||
snOspfLsdbChecksummandatory This field is the checksum of the complete contents ofthe advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksu… | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.8 | ||||||||||||||||||||
snOspfLsdbAdvertisementmandatory The entire Link State Advertisement, including itsheader. | OctetString Constraints: range: 1-65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.9 | ||||||||||||||||||||
snOspfLsdbAreaIdFormatmandatory This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.9.1.1.10 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1
·
1 row entry
·
8 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfExtLsdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfExtLsdbTable'
The OSPF Process's Links State Database.
A single Link State Advertisement.
Indexes
| Column | Syntax | OID | ||
|---|---|---|---|---|
snOspfExtLsdbEntryIndexmandatory The table entry index of this Link State Database. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.1 | ||
snOspfExtLsdbTypemandatory The type of the link state advertisement.Each link state type has a separate advertise- ment format. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.2 | ||
snOspfExtLsdbLsIdmandatory The Link State ID is an LS Type Specific fieldcontaining either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.3 | ||
snOspfExtLsdbRouterIdmandatory The 32 bit number that uniquely identifies theoriginating router in the Autonomous System. | RouterID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.4 | ||
snOspfExtLsdbSequencemandatory The sequence number field is a signed 32-bitinteger. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number t… | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.5 | ||
snOspfExtLsdbAgemandatory This field is the age of the link state adver-tisement in seconds. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.6 | ||
snOspfExtLsdbChecksummandatory This field is the checksum of the completecontents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checks… | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.7 | ||
snOspfExtLsdbAdvertisementmandatory The entire Link State Advertisement, includingits header. | OctetString Constraints: range: 36-36 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.10.1.1.8 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1
·
1 row entry
·
10 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfAreaStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfAreaStatusTable'
Information describing the configured parameters and cumulative statistics of the router's attached areas.
Information describing the configured parameters and
cumulative statistics of one of the router's attached
areas.
cumulative statistics of one of the router's attached
areas.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
snOspfAreaStatusEntryIndexmandatory The table entry index of this Area. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.1 | ||||
snOspfAreaStatusAreaIdmandatory A 32-bit integer uniquely identifying an area. AreaID 0.0.0.0 is used for the OSPF backbone. | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.2 | ||||
snOspfAreaStatusImportASExternmandatory The area's support for importing AS external link-state advertisements. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.3 | ||||
snOspfAreaStatusStubMetricmandatory The metric value applied at the default type ofservice(ospfMetric). By default, this equals the least metric at the type of service among the interfaces to other areas. This Object exist if only if the value of snO… | BigMetric Type Constraints: range: 0..16777215 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.4 | ||||
snOspfAreaStatusSpfRunsmandatory The number of times that the intra-area route tablehas been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.5 | ||||
snOspfAreaStatusAreaBdrRtrCountmandatory The total number of area border routers reachablewithin this area. This is initially zero, and is calculated in each SPF Pass. | RFC1155-SMIGauge Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.6 | ||||
snOspfAreaStatusASBdrRtrCountmandatory The total number of Autonomous System border routersreachable within this area. This is initially zero, and is calculated in each SPF Pass. | RFC1155-SMIGauge Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.7 | ||||
snOspfAreaStatusLSACountmandatory The total number of link-state advertisements in thisarea's link-state database, excluding AS External LSA's. | RFC1155-SMIGauge Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.8 | ||||
snOspfAreaStatusLSACksumSummandatory The 32-bit unsigned sum of the link-stateadvertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine i… | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.9 | ||||
snOspfAreaStatusAreaIdFormatmandatory This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.11.1.1.10 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1
·
1 row entry
·
22 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfIfStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfIfStatusTable'
The OSPF Interface Status Table describes the interfaces from the viewpoint of OSPF.
The OSPF Interface Entry describes one interface from
the viewpoint of OSPF.
the viewpoint of OSPF.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
snOspfIfStatusEntryIndexmandatory The table entry index of this Area. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.1 | ||||||||||||||
snOspfIfStatusPortmandatory The physical router port of this OSPF interface. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.2 | ||||||||||||||
snOspfIfStatusIpAddressmandatory The IP address of this OSPF interface. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.3 | ||||||||||||||
snOspfIfStatusAreaIdmandatory A 32-bit integer uniquely identifying the area towhich the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.4 | ||||||||||||||
snOspfIfStatusTypemandatory The OSPF interface type.By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25, Frame R… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.5 | ||||||||||||||
snOspfIfStatusAdminStatmandatory The OSPF interface's administrative status. The value'enabled' denotes that neighbor relationships may be formed on the interface, and the interface will be advertised as an internal route to some area. The value 'di… | RtrStatus Type Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.6 | ||||||||||||||
snOspfIfStatusRtrPrioritymandatory The priority of this interface. Used in multi-accessnetworks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on t… | DesignatedRouterPriority Type Constraints: range: 0..255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.7 | ||||||||||||||
snOspfIfStatusTransitDelaymandatory The estimated number of seconds it takes to transmit alink- state update packet over this interface. | UpToMaxAge Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.8 | ||||||||||||||
snOspfIfStatusRetransIntervalmandatory The number of seconds between link-state advertisementretransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. | UpToMaxAge Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.9 | ||||||||||||||
snOspfIfStatusHelloIntervalmandatory The length of time, in seconds, between the Hellopackets that the router sends on the interface. This value must be the same for all routers attached to a common network. | HelloRange Type Constraints: range: 1..65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.10 | ||||||||||||||
snOspfIfStatusRtrDeadIntervalmandatory The number of seconds that a router's Hello packetshave not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers att… | PositiveInteger Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.11 | ||||||||||||||
snOspfIfStatusStatemandatory The OSPF Interface State. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.12 | ||||||||||||||
snOspfIfStatusDesignatedRoutermandatory The IP Address of the Designated Router. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.13 | ||||||||||||||
snOspfIfStatusBackupDesignatedRoutermandatory The IP Address of the Backup Designated Router. | RFC1155-SMIIpAddress Type Constraints: range: 4 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.14 | ||||||||||||||
snOspfIfStatusEventsmandatory The number of times this OSPF interface has changedits state, or an error has occurred. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.15 | ||||||||||||||
snOspfIfStatusAuthTypemandatory The authentication type specified for an interface.Additional authentication types may be assigned locally on a per interface basis. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.16 | ||||||||||||||
snOspfIfStatusAuthKeymandatory The Authentication Key. If the Area's AuthorizationType is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. When read, snOspfIfStatusAut… | OctetString Constraints: range: 0-8 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.17 | ||||||||||||||
snOspfIfStatusMetricValuemandatory The metric of using this type of service onthis interface. The default value of the TOS 0 Metric is 10^8 / ifSpeed. | Metric Type Constraints: range: 0..65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.18 | ||||||||||||||
snOspfIfStatusMd5AuthKeyIdmandatory The md5 authentication key ID. If the snOspfVirtIfAuthTypeis set to md5, the value of snOspfIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest appe… | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.19 | ||||||||||||||
snOspfIfStatusMd5AuthKeymandatory The MD5 Authentication Key. If the Area's AuthorizationType is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey always returns an… | OctetString Constraints: range: 0-16 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.20 | ||||||||||||||
snOspfIfStatusMd5ActivationWaitTimemandatory The md5 authentication key activation wait time is specified in secondand the maximum wait time is 14400 seconds (4 hours). | Integer32 Constraints: range: 0-14400 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.21 | ||||||||||||||
snOspfIfStatusAreaIdFormatmandatory This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.12.1.1.22 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1
·
1 row entry
·
15 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfVirtIfStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfVirtIfStatusTable'
Information about this router's virtual interfaces.
Information about a single Virtual Interface.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
snOspfVirtIfStatusEntryIndexmandatory The table entry index of this Area. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.1 | ||||
snOspfVirtIfStatusAreaIDmandatory The Transit Area that the Virtual Link traverses. Bydefinition, this is not 0.0.0.0 | AreaID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.2 | ||||
snOspfVirtIfStatusNeighbormandatory The Router ID of the Virtual Neighbor. | RouterID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.3 | ||||
snOspfVirtIfStatusTransitDelaymandatory The estimated number of seconds it takes to transmit alink- state update packet over this interface. | UpToMaxAge Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.4 | ||||
snOspfVirtIfStatusRetransIntervalmandatory The number of seconds between link-state advertisementretransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This… | UpToMaxAge Type Constraints: range: 0..3600 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.5 | ||||
snOspfVirtIfStatusHelloIntervalmandatory The length of time, in seconds, between the Hellopackets that the router sends on the interface. This value must be the same for the virtual neighbor. | HelloRange Type Constraints: range: 1..65535 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.6 | ||||
snOspfVirtIfStatusRtrDeadIntervalmandatory The number of seconds that a router's Hello packetshave not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual nei… | PositiveInteger Type Constraints: range: 0..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.7 | ||||
snOspfVirtIfStatusStatemandatory The OSPF virtual interfaces states. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.8 | ||||
snOspfVirtIfStatusEventsmandatory The number of state changes or error events on this Virtual Link. | RFC1155-SMICounter Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.9 | ||||
snOspfVirtIfStatusAuthTypemandatory The authentication type specified for an interface.Additional authentication types may be assigned locally on a per interface basis. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.10 | ||||
snOspfVirtIfStatusAuthKeymandatory If Authentication Type is simplePassword, the devicewill left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey always returns a string of length zero. | OctetString Constraints: range: 0-8 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.11 | ||||
snOspfVirtIfStatusMd5AuthKeyIdmandatory The md5 authentication key ID. If the snOspfVirtIfAuthTypeis set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 255). This field identifies the algorithm and secret key used to create the message digest … | Integer32 Constraints: range: 0-255 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.12 | ||||
snOspfVirtIfStatusMd5AuthKeymandatory The MD5 Authentication Key. If the Area's AuthorizationType is md5, and the key length is shorter than 16 octets, the agent will left adjust and zero fill to 16 octets. When read, snOspfIfMd5AuthKey al… | OctetString Constraints: range: 0-16 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.13 | ||||
| The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). | Integer32 Constraints: range: 0-14400 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.14 | ||||
snOspfVirtIfStatusAreaIdFormatmandatory This object is used to specify whetherAreaId is represented as IP Address or an Integer. The values that can be written are: integer(0).....as an integer. ipAddress(1)...as IP Address. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.13.1.1.15 |
.1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1
·
1 row entry
·
5 columns
Uses the hp variant from
Command help
/opt/observium/mibs/hp.
Walk snOspfRoutingInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-OSPF-GROUP-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-OSPF-GROUP-MIB::snOspfRoutingInfoTable'
Information about this router's routing information.
Information about a single ABR/ASBR Routing entry.
Indexes
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
snOspfRoutingInfoIndexmandatory The table entry index of this Routing entry. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.1 | ||||||
snOspfRoutingInfoRouterIDmandatory The Router ID of the destination router. | RouterID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.2 | ||||||
snOspfRoutingInfoRouterTypemandatory The Router type of the destination router as the following:abr (1) -- area border router. asbr (2) -- autonomous sytem border router. abrANDasbr(3) -- area border and autonomous system border router. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.3 | ||||||
snOspfRoutingInfoNextHopRouterIDmandatory The router ID of the next hop destination router. | RouterID | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.4 | ||||||
snOspfRoutingInfoOutgoingInterfacemandatory The outgoing interface of the destination router. | Integer32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.11.2.3.7.11.12.2.4.14.1.1.5 |