HP-MCSG Table View

Table-centric layout grouping table, row, and column objects.

Tables
9
Rows
9
Columns
38
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.2.1 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpmcSGLockTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-MCSG' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-MCSG::hpmcSGLockTable'
A table describing the volume groups which are used
as locks for the ServiceGuard cluster.
hpmcSGLockEntry row .1.3.6.1.4.1.11.2.3.1.6.3.1.1.2.1.1
An entry providing information about a specific volume
used for locking the ServiceGuard cluster.
Column Syntax OID
hpmcSGVolumeIndexA value which uniquely identifies this volume.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.2.1.1.1
hpmcSGPhysicalVolumeDevice path used to access the disk device used for
locking.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.2.1.1.2
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpmcSGNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-MCSG' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-MCSG::hpmcSGNetTable'
A table describing the network interfaces in which SG
has an active interest.
hpmcSGNetEntry row .1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1
An entry providing information about a specific network
interface of interest to the ServiceGuard cluster.
Column Syntax OID
hpmcSGNetIfIndexThe index value which uniquely identifies the network
interface card to which this entry is applicable. This
index matches that in the MIB-II interface table and
in particular, ifIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.1
hpmcSGNetIfNameThis is the concise name of the network interface, which
is used in local system management operations. It may
differ from the MIB II object ifDescr, in that the
latter can contain additional information.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.2
hpmcSGNetBridgedNetA unique value which identifies the bridged network
to which this interface card is physically attached.
Interface cards sharing the same bridged network,
which are not currently active can act in a backup
capacity for …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.3
hpmcSGNetIfFlagsAn integer whose value represents a bitstring. These
bit values indicate flag settings for this interface
as well as status information. Note that the MIB-II
interface group also contains status information, but
this…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.4
hpmcSGNetLastEventTimeIndicates at what time the event described by
hpmcSGNetLastEvent occured. A value of 0 indicates
that the time is unknown.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.6
hpmcSGNetIfHwPathDescribes the HW location of the interface card. This
information can be useful in locating the physical
position of a faulty card.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.3.1.1.7
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1 · 1 row entry · 10 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpmcSGPkgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-MCSG' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-MCSG::hpmcSGPkgTable'
A table describing the packages which are currently
configured for the ServiceGuard cluster.
hpmcSGPkgEntry row .1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1
An entry providing information about a specific package.
Indexes
Column Syntax OID
hpmcSGPkgIndexAn index value which uniquely identifies the package.
These indices should be consistent across nodes in
the same SG Cluster. More specifically, these indices
should match the cluster-wide pkgid assigned by SG.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.1
hpmcSGPkgNameThe name configured for this package.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.2
hpmcSGPkgDescrExplanatory text provided by the user to further
clarify the function of this package.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.3
hpmcSGPkgStatusThis integer value is the encoding of a set of bits
which include configured flags for the package in
addition to dynamic status information. The value is
determined by summing those flags from the list below
which are…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.4
hpmcSGPkgCurrNodeName of the node where the package is executing. This
string will be empty if the package is currently unowned.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.5
hpmcSGPkgLastEventTimeIndicates at what time the package entered the status
described by hpmcSGPkgStatus. A value of 0 indicates
that the time is unknown.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.7
hpmcSGPkgRunScriptPathThe name of the file which is invoked in order to
launch the package.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.8
hpmcSGPkgHaltScriptPathThe name of the file which is invoked in order to
shutdown the package. This is often the same as
the Run Script.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.9
hpmcSGPkgRunScriptTimeoutThe maximum amount of time allowed for the Run Script
to complete. The value is expressed in seconds.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.10
hpmcSGPkgHaltScriptTimeoutThe maximum amount of time allowed for the Run Script
to complete. The value is expressed in seconds.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.1.1.11
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpmcSGPkgSubnetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-MCSG' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-MCSG::hpmcSGPkgSubnetTable'
A table describing the subnets upon which this package 
has a dependency.
hpmcSGPkgSubnetEntry row .1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2.1
An entry describes a single subnet dependency.
Column Syntax OID
hpmcSGPkgSubnetThe Subnetwork Id on which this package has a dependency.
Service Guard will migrate the package to another host
in the event this subnetwork becomes unavailable.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2.1.1
hpmcSGPkgSubnetStatusThe current state of the service.Enumeration
Enumerated Values:
0unknown
1down
2up
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2.1.2
hpmcSGPkgOverrideMACAddrA MAC address which will be used to override the
default MAC address on the interface card associated
with the given Subnet. In particular this will allow
DLPI applications to continue servicing clients on
the same …
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.2.1.3
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.3 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpmcSGPkgAddrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-MCSG' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-MCSG::hpmcSGPkgAddrTable'
A table describing the movable IP addresses which are 
usually associated with active packages on this node.
hpmcSGPkgAddrEntry row .1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.3.1
An entry describes a single address associated with a
package.
Indexes
Column Syntax OID
hpmcSGPkgAddrA migratable address which is currently active for
this package.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.3.1.1
hpmcSGPkgIDThe hpmcSGPkgIndex value for the owning package.
A value of 0 indicates no owning package.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.3.1.2
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpmcSGPkgSvcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-MCSG' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-MCSG::hpmcSGPkgSvcTable'
A table describing the services or applications which
are associated with active packages on this node.
hpmcSGPkgSvcEntry row .1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1
An entry that describes a single service associated with a
package.
Column Syntax OID
hpmcSGPkgSvcIndexA unique value which identifies this service in the
context of the package.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.1
hpmcSGPkgSvcNameThe name of this service.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.2
hpmcSGPkgSvcStatusThe current state of the service.Enumeration
Enumerated Values:
0unknown
1down
2up
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.3
hpmcSGPkgSvcFlagsAn integer whose value represents a bitstring. These
bit values indicate flag settings for this service.
Currently there is only one flag available. The
value is determined by summing the following:
8 - FailFastSwit…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.4
hpmcSGPkgSvcHaltTimeoutThe maximum amount of time ServiceGuard will wait
for the service to terminate during package shutdown.
The value is expressed in seconds.
secondsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.5
hpmcSGPkgSvcMaxRestartsThe maximum number of times this Service may be restarted.
A value of 0 indicates that the service may not be
restarted, a value of -1 indicates no limit.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.6
hpmcSGPkgSvcRestartCountThe current number of times this service has been
restarted.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.4.1.7
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpmcSGPkgNodeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-MCSG' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-MCSG::hpmcSGPkgNodeTable'
A table describing the ordered list of nodes where
this package can run.
hpmcSGPkgNodeEntry row .1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5.1
An entry describes a single candidate node.
Column Syntax OID
hpmcSGPkgNodeRankOrder in which the node indicated by hpmcSGPkgNode will
be chosen for this package. Lowest number is chosen
first.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5.1.1
hpmcSGPkgNodeIndex of a node (within the hpmcNodeTable) that could run
this package.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5.1.2
hpmcSGPkgLocalSwitchEnableA binary value that represents the status of the LOCAL
switch capability for the respective package on the
particular node.
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.5.1.3
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpmcSGPkgSubnet6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-MCSG' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-MCSG::hpmcSGPkgSubnet6Table'
A table describing the IPv6 subnets upon which this package
has a dependency.
hpmcSGPkgSubnet6Entry row .1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6.1
An entry describes a single IPv6 subnet dependency.
Column Syntax OID
hpmcSGPkgSubnet6The IPv6 Subnetwork Id on which this package has a dependency.
Service Guard will migrate the package to another host
in the event this subnetwork becomes unavailable.
OctetString.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6.1.1
hpmcSGPkgSubnet6StatusThe current state of the IPv6 subnet.Enumeration
Enumerated Values:
0unknown
1down
2up
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6.1.2
hpmcSGPkgOverrideMACAddr6A MAC address which will be used to override the
default MAC address on the interface card associated
with the given IPv6 Subnet. In particular this will allow
DLPI applications to continue servicing clients on
the sam…
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.6.1.3
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.7 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpmcSGPkgAddr6Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-MCSG' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-MCSG::hpmcSGPkgAddr6Table'
A table describing the movable IPv6 addresses which are
usually associated with active packages on this node.
hpmcSGPkgAddr6Entry row .1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.7.1
An entry describes a single IPv6 address associated with a
package.
Indexes
Column Syntax OID
hpmcSGPkgAddr6A migratable IPv6 address which is currently active for
this package.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.7.1.1
hpmcSGPkgID6The hpmcSGPkgIndex value for the owning package.
A value of 0 indicates no owning package.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.1.6.3.1.1.4.7.1.2