HP-ICF-OSPFV3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
19
Rows
19
Columns
96

hpicfOspfv3AsLsdbTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.2 · 1 row entry · 10 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3AsLsdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3AsLsdbTable' 
The OSPFv3 AS-Scope Link State Database
(LSDB). The LSDB contains the AS-Scope Link State 
Advertisements from throughout the areas that the 
device is attached to.
hpicfOspfv3AsLsdbEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1
A single AS-Scope Link State Advertisement.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfv3AsLsdbEFTFlags
A 32-bit integer Representing the E,F and T bit flags
Bits
Enumerated Values:
0bitE
1bitF
2bitT
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.1
hpicfOspfv3AsLsdbMetric
The cost associated with this route.
OSPF-MIBMetric
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.2
hpicfOspfv3AsLsdbPrefixLength
The Prefix Length of the Address Prefix.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.3
hpicfOspfv3AsLsdbPrefixOptions
The Prefix Options associated with the Address Prefix.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.4
hpicfOspfv3AsLsdbRefLsType
If non-zero value, this refers to another LSA type in
Link State Database further identified by the Reference
Link State ID field
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.5
hpicfOspfv3AsLsdbAddrPrefix
The advertised 16-byte Address Prefix.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.6
hpicfOspfv3AsLsdbFwdingAddress
If included, Data traffic for the advertised destination
will be forwarded to this address.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.7
hpicfOspfv3AsLsdbExtRouteTags
The 32-bit Route Tag for the advertised Route.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.8
hpicfOspfv3AsLsdbRefLsId
The 32-bit Link state ID of the referenced LSA entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.9
hpicfOspfv3AsLsdbLsaLength
This field describes the length of LSA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.2.1.10

hpicfOspfv3AreaLsdbTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.3 · 1 row entry · 16 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3AreaLsdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbTable' 
The OSPFv3 Area-Scope link state database.
The LSDB contains the Area-Scope Link State 
Advertisements from throughout the area that the 
device is attached to.
hpicfOspfv3AreaLsdbEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1
A single Area-Scope Link State Advertisement.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfv3AreaLsdbRtrCapBits
This field is valid only for Router LSA. It
represents the capabilities of the router in the Area.
Bits
Enumerated Values:
0bitV
1bitE
2bitB
3bitW
4bitNt
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.1
hpicfOspfv3AreaLsdbOptions
The Options field enables OSPF routers to support
(or not support) optional capabilities, and to
communicate their capability level to other
OSPF routers. This field is valid if the LSA
is a Router LSA or a Network LS…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.2
hpicfOspfv3AreaLsdbMetric
This field is valid only for Router LSA, a
Inter-Area_prefix LSA or a NSSA LSA. This field
indicates the cost involved in
using the interface or route.
OSPF-MIBMetric
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.3
hpicfOspfv3AreaLsdbPrefixLength
The Prefix Length of the Address Prefix.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.4
hpicfOspfv3AreaLsdbPrefixOptions
The Prefix Options associated with the Address Prefix.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.5
hpicfOspfv3AreaLsdbAddrPrefix
The advertised 16-byte Address Prefix.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.6
hpicfOspfv3AreaLsdbDstRtrId
The Router ID of the router being described by
the LSA. This field is valid if
the LSA is a Inter-Area-Router LSA.
OSPFV3-MIBOspfv3RouterIdTC
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.7
hpicfOspfv3AreaLsdbNumPrefixes
This field is valid only for Inter-Area-Prefix LSA
and indicates the number of prefixes in the LSA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.8
hpicfOspfv3AreaLsdbRefLsType
This field is valid only for Inter-Area-Prefix LSA or a
NSSA LSA. If non-zero, an LSA with this LS type is to be
associated with this LSA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.9
hpicfOspfv3AreaLsdbRefLsId
This field is valid only for Inter-Area-Prefix LSA or
a NSSA LSA. This field is included only if the
Reference LS Type field is set and identifies
the LSA with this Link State ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.10
hpicfOspfv3AreaLsdbRefAdvRtrId
This field is valid only for Inter-Area-Prefix LSA or
a NSSA LSA. This field is included only if the
Reference LS Type field is set and identifies the LSA
having this Router ID as the advertising Router ID.
OSPFV3-MIBOspfv3RouterIdTC
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.11
hpicfOspfv3AreaLsdbEFTFlags
This field is valid only for NSSA LSA. This field
represents the E,F and T bit flags
Bits
Enumerated Values:
0bitE
1bitF
2bitT
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.12
hpicfOspfv3AreaLsdbFwdingAddress
This field is valid only for NSSA LSA. This field is
present only if the 'F' Bit is set in the EFT flags
field and if included, the data traffic for the
advertised destination will be forwarded to this
address.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.13
hpicfOspfv3AreaLsdbExtRouteTags
This field is valid only for NSSA LSA. This field is
present only if the 'T' Bit is set in the EFT flags
field. A 32-bit field which may be used to communicate
additional information between AS boundary routers.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.14
hpicfOspfv3AreaLsdbLsaLength
This field describes the length of LSA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.15
hpicfOspfv3AreaLsdbLinks
This field describes the number of links.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.3.1.16

hpicfOspfv3LinkLsdbTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.4 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3LinkLsdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLsdbTable' 
The OSPFv3 Link-Scope link state database(LSDB) for
non-virtual interfaces. The LSDB contains the 
Link-Scope Link State Advertisements from the 
interfaces that the device is attached to.
hpicfOspfv3LinkLsdbEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1
A single Link-Scope Link State Advertisement.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfv3LinkLsdbRtrPriority
This field is the OSPF priority set for this router
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.1
hpicfOspfv3LinkLsdbOptions
The Options field enables OSPF routers to support
(or not support) optional capabilities, and to
communicate their capability level to other
OSPF routers.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.2
hpicfOspfv3LinkLsdbLocalAddress
The advertising router's link local IPv6 address
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.3
hpicfOspfv3LinkLsdbNumPrefixes
The number of other links on the advertising router
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.4
hpicfOspfv3LinkLsdbLsaLength
This field describes the length of LSA.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.4.1.5

hpicfOspfv3IfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.5 · 1 row entry · 6 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3IfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3IfTable' 
The table describes the Ospfv3 interfaces.
hpicfOspfv3IfEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1
The Entry describes one Ospfv3 interface.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfv3IfPassive
The passive state configuration of the OSPF interface.
In the passive mode no OSPF protocol messages are
exchanged on this interface.

true (1) - The interface is configured to work
in…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.1
hpicfOspfv3IfNbrCount
This object specifies the number of OSPFv3 neighbors
reachable via this interface. This counter should be
incremented when a new neighbor is added in the network
in which this interface is present.
It should be decre…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.2
hpicfOspfv3IfDRAddr
This object specifies link local ipv6 address of
Designated Router on the interface.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.10
hpicfOspfv3IfBDRAddr
This object specifies link local ipv6 address
of Backup Designated Router on the interface.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.11
hpicfOspfv3IfHelloDueTime
This object specifies the time remaining for the
hello timer for the particular Interface to expire.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.12
hpicfOspfv3IfAdjNbrCount
This object specifies the number of fully
adjacent neighbors present on this interface.
This counter should be incremented when a new
neighbor becomes fully adjacent. It should be
decremented when the neighbor goes o…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.5.1.13

hpicfOspfv3NbrTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.6 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3NbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3NbrTable' 
A table describing all neighbors of the
of the OSPFv3 router.
hpicfOspfv3NbrEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1
The information regarding a single neighbor.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfv3NbrUpTime
This object specifies the time duration in
seconds for which the adjacency with a
particular neighbor is active.
This should be a monotonically increasing timer
for the duration till the adjacency is active.
This …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.1
hpicfOspfv3NbrTimeToExpiry
This object specifies the time remaining for the
dead timer for the particular neighbor to expire.
This counter thus specifies the time in seconds
left for an adjacency to be brought down in case
no hello packet is rec…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.2
hpicfOspfv3NbrDataBaseSummary
The number of Link State Advertisements (LSA)
sent in Database Description (DD)packet.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.3
hpicfOspfv3NbrLinkStateRequest
The number of Link State Advertisements (LSA)
in link state request list.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.4
hpicfOspfv3NbrRestartState
Describes the Graceful Restart(GR) state.

normal(0) - Indicates normal status
helper(1) - Helper indicates the router is helping
another router which is currently in graceful
restart.
Enumeration
Enumerated Values:
0normal
1helper
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.6.1.5

hpicfOspfv3IfStatsTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.7 · 1 row entry · 12 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3IfStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3IfStatsTable' 
Table that contains OSPFv3 Interface traffic
specific statistics.
hpicfOspfv3IfStatsEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1
A list of statistics counters maintained for an
OSPFv3 interface traffic information.
Indexes
Column Syntax OID
hpicfOspfv3IfSentHelloPkt
The number of OSPFv3 Hello packets sent on the
interface. This number is incremented each time
an OSPFv3 Hello packet is sent out of an
OSPFv3 enabled interface.
Discontinuities in the value of this counter can
occur a…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.1
hpicfOspfv3IfSentDDPkt
The number of Database Description packets
sent on the interface. This number is incremented each
time an OSPFv3 DD packet is sent out of an OSPFv3
enabled interface.
Discontinuities in the value of this counter
can o…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.2
hpicfOspfv3IfSentLSRPkt
The number of Link State Request packets sent on
the interface. This number is incremented each
time OSPFv3 LSR packet is sent out of an OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occur …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.3
hpicfOspfv3IfSentLSUPkt
The number of Link State Update packets sent on
the interface. This number is incremented each
time OSPFv3 LSU packet is sent out of an OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occur a…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.4
hpicfOspfv3IfSentLSAPkt
The number of Link State Acknowledgement packet
sent on the interface. This number is
incremented each time OSPFv3 LS Ack packet is sent
out of an OSPFv3 enabled interface.
Discontinuities in the value of this counter
…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.5
hpicfOspfv3IfRcvdHelloPkt
The number of Hello packets received on the
interface. This number is incremented each time
a hello packet is received on OSPFv3 enabled
interface.
Discontinuities in the value of this counter
can occur at re-initiali…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.6
hpicfOspfv3IfRcvdDDPkt
The number of Database Description packets
received on the interface. This number is
incremented each time a OSPFv3 DD packet is
received on OSPFv3 enabled interface.
Discontinuities in the value of this counter
can o…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.7
hpicfOspfv3IfRcvdLSRPkt
The number of Link State Request packets received
on the interface. This number is incremented each
time a OSPFv3 LSR packet is received on OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occu…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.8
hpicfOspfv3IfRcvdLSUPkt
The number of Link State Update packets received
on the interface. This number is incremented each
time an OSPFv3 LSU packet is received on OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occ…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.9
hpicfOspfv3IfRcvdLSAPkt
The number of Link State Acknowledgement packets
received on the interface.
This number is incremented each
time a OSPF LS Ack packet is received on OSPFv3
enabled interface.
Discontinuities in the value of this counte…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.10
hpicfOspfv3IfSentTotalErrorCount
This refers to the number of erroneous packets
discarded on an OSPFv3 interface while sending
errors.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.11
hpicfOspfv3IfRcvdTotalErrorCount
This refers to the number of erroneous packets
received on an OSPFv3 interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.7.1.12

hpicfOspfv3IfErrorTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.8 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3IfErrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3IfErrorTable' 
Table that contains OSPFv3 Interface traffic specific
error information.
hpicfOspfv3IfErrorEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1
A list of error counters maintained for an OSPFv3
interface.
Indexes
Column Syntax OID
hpicfOspfv3IfErrorType
This refers to the type of errors in the OSPFv3
packet received on an OSPFv3 enabled interface.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.1
hpicfOspfv3IfErrorCount
This refers to the number of erroneous packets
received on an OSPFv3 interface for each error
type.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.8.1.2

hpicfOspfv3IfClearStatsTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.9 · 1 row entry · 1 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3IfClearStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3IfClearStatsTable' 
A list used to clear statistics information
maintained for an OSPFv3 interface.
hpicfOspfv3IfClearStatsEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1
A list used to clear statistics information
maintained for an OSPFv3 interface.
Indexes
Column Syntax OID
hpicfOspfv3ClearCounters
When this variable is set
to true for a given vlan interface, correspondiing
interface counters will be cleared. Read of this will
always be false.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.9.1.1

hpicfOspfv3SpfTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.10 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3SpfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3SpfTable' 
Table that contains OSPFv3 SPF execution details.
hpicfOspfv3SpfEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1
A list of OSPFv3 SPF algorithm execution details.
Indexes
Column Syntax OID
hpicfOspfv3SpfIndex
The index in spf table. This can range from 1 to 100
as only last hundred SPF run's reasons will be saved.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.1
hpicfOspfv3SpfReason
The hpicfOspfv3SpfReason refers to the reasons for
scheduling an SPF run. The Reasons could be OSPFv3
initialization, adding/deleting interface or link state
update received.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.10.1.2

hpicfOspfv3LogTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.11 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3LogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3LogTable' 
A table containing the configuration parameters
for OSPFv3 event logging.
hpicfOspfv3LogEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1
The configuration parameters for OSPFv3
event log entry.
Indexes
Column Syntax OID
hpicfOspfv3LogType
The type of the event log in OSPFv3
routing protocol .
HP-ICF-OSPFHpicfOspfLogType
Type Values:
1neighborAdjacencyChanges
2other
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.1
hpicfOspfv3LogAction
The mode of OSPFv3 event logging. If the
OSPFv3 log type is set to
neighborAdjacencyChanges, then meaning of
this field is as follows:
If enabled, it logs only the adjacency
state transitions to final states.
If enabl…
HP-ICF-OSPFHpicfOspfLogActionr/w
Type Values:
1enabled
2disabled
3enabledWithDetail
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.11.1.2

hpicfOspfv3RouterLSATable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.12 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3RouterLSATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3RouterLSATable' 
This table represents details advertised in router LSA
in addition to area LSDB table.
hpicfOspfv3RouterLSAEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1
A single Area-Scope Link State Advertisement.
Indexes
Column Syntax OID
hpicfOspfv3RouterLSANbrIfId
The Interface Id of the neighbor.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.1
hpicfOspfv3RouterLSANbrRtrId
The Router ID the of the neighbor router.
OSPFV3-MIBOspfv3RouterIdTC
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.2
hpicfOspfv3RouterLSAIfType
The kind of interface being described. One of the following:
Type Description
---------------------------------------------------
1 Point-to-point connection to another router
2 Connecti…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.3
hpicfOspfv3RouterLSAMetric
The cost of using this router interface
for outbound traffic.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.4
hpicfOspfv3RouterLSAIfId
The Interface ID assigned to the interface
being described.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.12.1.5

hpicfOspfv3NetworkLSATable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.13 · 1 row entry · 2 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3NetworkLSATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3NetworkLSATable' 
This table represents details advertised
in a Network LSA in addition to area LSDB table.
hpicfOspfv3NetworkLSAEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1
A single Area-Scope Link State Advertisement.
Indexes
Column Syntax OID
hpicfOspfv3NetworkLSASeqNum
The 32-bit LSA sequence number.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.1
hpicfOspfv3NetworkLSAAttachedRouter
The 32-bit Router identifier of the attached Router.
OSPFV3-MIBOspfv3RouterIdTC
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.13.1.2

hpicfOspfv3IntraAPLSATable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.14 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3IntraAPLSATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3IntraAPLSATable' 
This table represents details advertised in Intra 
AP LSA in addition to area LSDB table.
hpicfOspfv3IntraAPLSAEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1
A single Area-Scope Link State Advertisement.
Indexes
Column Syntax OID
hpicfOspfv3IntraAPAddrPrefix
The advertised 16-byte Address Prefix.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.1
hpicfOspfv3IntraAPPrefixLength
The Prefix Length of the Address Prefix.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.2
hpicfOspfv3IntraAPPrefixOptions
The Prefix Options associated with the Address Prefix.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.3
hpicfOspfv3IntraAPMetric
The Cost associated with the Address Prefix.
OSPF-MIBMetric
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.14.1.4

hpicfOspfv3LinkLSATable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.15 · 1 row entry · 3 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3LinkLSATable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3LinkLSATable' 
This table represents details advertised
in link LSA in addition to link LSDB table.
hpicfOspfv3LinkLSAEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1
A single Link-Scope Link State Advertisement.
Indexes
Column Syntax OID
hpicfOspfv3LinkAddrPrefix
The address prefix of link advertised
in link LSA.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.1
hpicfOspfv3LinkPrefixLength
The Prefix Length of the Address Prefix.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.2
hpicfOspfv3LinkPrefixOptions
The Prefix Options associated with the Address Prefix.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.15.1.3

hpicfOspfv3AreaTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.17 · 1 row entry · 10 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3AreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaTable' 
This table describes Ospfv3 area.
hpicfOspfv3AreaEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1
The object describes Ospfv3 area.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfv3AreaNbrDownCount
This object indicates the number of neighbor routers
in this area that are in DOWN state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.8
hpicfOspfv3AreaNbrAttemptCount
This object indicates the number of neighbor routers
in this area that are in ATTEMPT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.9
hpicfOspfv3AreaNbrInitCount
This object indicates the number of neighbor routers
in this area that are in INIT state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.10
hpicfOspfv3AreaNbr2wayCount
This object indicates the number of neighbor routers
in this area that are in TWO WAY state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.11
hpicfOspfv3AreaNbrExstartCount
This object indicates the number of neighbor routers
in this area that are in EX-START state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.12
hpicfOspfv3AreaNbrExchangeCount
This object indicates the number of neighbor routers
in this area that are in EXCHANGE state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.13
hpicfOspfv3AreaNbrLoadingCount
This object indicates the number of neighbor routers
in this area that are in LOADING state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.14
hpicfOspfv3AreaNbrFullCount
This object indicates the number of neighbor routers
in this area that are in FULL state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.15
hpicfOspfv3AreaInterfaceCount
This object indicates the total number of
OSPFv3 interfaces in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.16
hpicfOspfv3AreaScopeUnknownLsaCount
The total number of area-scope unknown link state
advertisements in this area's link state
database.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.17.1.17

hpicfOspfv3AreaAggregateTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.19 · 1 row entry · 1 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3AreaAggregateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaAggregateTable' 
HP proprietary extensions to ospfv3AreaAggregateTable
hpicfOspfv3AreaAggregateEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.19.1
Each entry is extension of ospfv3AreaAggregateEntry
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfv3AreaAggregateCost
Manually configured cost of the summary advertisement.
A value of 0 indicates that the cost
calculated by the OSPF standard should be used.
Valid costs range from 1-16777215
OSPF-MIBBigMetricr/w
Type Constraints:
range: 0..16777215
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.19.1.1

hpicfOspfv3AreaLsdbStatsTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.20 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3AreaLsdbStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3AreaLsdbStatsTable' 
Table that contains OSPFv3 area link state database
statistics specific information.
hpicfOspfv3AreaLsdbStatsEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1
A list of statistics counters maintained for an OSPFv3
area link state database.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfv3AreaLsdbStatRtrLsaCnt
This object indicates number of
router LSA per area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.1
hpicfOspfv3AreaLsdbStatNwLsaCnt
This object indicates number of
network LSA per area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.2
hpicfOspfv3AreaLsdbStatInterPreLsaCnt
This object indicates number of
inter-area prefix LSA per area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.3
hpicfOspfv3AreaLsdbStatInterRtrLsaCnt
This object indicates number of
inter-area router LSA per area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.4
hpicfOspfv3AreaLsdbStatIntraPreLsaCnt
This object indicates number of
intra-area prefix LSA per area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.20.1.5

hpicfOspfv3DistributeListTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.21 · 1 row entry · 4 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3DistributeListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3DistributeListTable' 
A table of route prefixes for filtering out
intra-area routes that OSPFv3 should not install into
local routing table.  Any route that is contained by
a range in this table (in other words, has a longer mask
than that specified by hpicfOspfv3DistributeListPrefixLength
and where the route destination ANDed with the
hpicfOspfv3DistributeListPrefixLength is equal to
hpicfOspfv3DistributeListAddr) will not be
installed into FIB by OSPFv3.
hpicfOspfv3DistributeListEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1
A single entry in the table. Any intra-area route,
which is contained within the specified range will not
be installed into FIB by OSPFv3. Entries in this
table are created dynamically using the
hpicfOspfv3DistributeLi…
Indexes
Column Syntax OID
hpicfOspfv3DistributeListAddr
The IP address of the range of route entries
to exclude from installing into FIB by OSPFv3.
INET-ADDRESS-MIBInetAddressIPv6
Type Constraints:
range: 16
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1.1
hpicfOspfv3DistributeListPrefixLength
The mask for the range of route entries to
exclude from installing into FIB by OSPFv3.
.1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1.2
hpicfOspfv3DistributeListSeqNum
The sequence number of this entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1.3
hpicfOspfv3DistributeListStatus
The status of this entry.
r/w .1.3.6.1.4.1.11.2.14.11.5.1.44.1.21.1.4

hpicfOspfv3IfMetricTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.44.4.1 · 1 row entry · 1 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOspfv3IfMetricTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OSPFV3-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OSPFV3-MIB::hpicfOspfv3IfMetricTable' 
Extensions to the table that contains OSPF Metric specific
information.
hpicfOspfv3IfMetricEntry row .1.3.6.1.4.1.11.2.14.11.5.1.44.4.1.1
A list of extensions to the information maintained
for an OSPF interface.
Indexes
No indexes recorded
Column Syntax OID
hpicfOspfv3IfFlagValue
This flag is defined to know the type of OSPF cost
configuration..
-1 : Default configuration.
0 : Manual configuration.
1 : Global configuration (value taken from global).
Integer32r/w
Constraints:
range: -1-1
 .1.3.6.1.4.1.11.2.14.11.5.1.44.4.1.1.1