HP-ICF-OPENFLOW-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
59

hpicfOpenFlowInstanceTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.89.1.4 · 1 row entry · 33 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOpenFlowInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OPENFLOW-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceTable' 
A table that is used create an OpenFlow instance. 
For maximum number of OpenFlow instances 
that can be supported, refer to 
hpicfOpenFLowMaxInstances MIB object.
hpicfOpenFlowInstanceEntry row .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1
A set of objects that are used to create an
OpenFlow instance.
Indexes
Column Syntax OID
hpicfOpenFlowInstanceName
Unique name given to an OpenFlow instance.
The instance name 'aggregate' is special case
denoting switch functioning as OpenFlow switch.
The instance name allows lowercase alphanumeric
characters and the special charac…
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.1
hpicfOpenFlowInstanceAdminStatus
This object is used to administratively enable
or disable an OpenFlow instance. This MIB
object can be set to 'enable' only when either
hpicfOpenFlowInstanceListenPortCfg has been
set to 'true' or atleast one contro…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.2
hpicfOpenFlowInstanceListenPortCfg
This object indicates if a listen-port is
configured on this OpenFlow instance.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.3
hpicfOpenFlowInstanceListenPort
Port number for the listen-port on the
OpenFlow instance. A valid port number is
between 1024 and 65534 inclusive.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.4
hpicfOpenFlowInstanceListenPortIsOobm
This object indicates if a listen-port is
configured for this OpenFlow instance over
OOBM(Out Of Band Management) interface.
This MIB object will be applicable only if
there is a physical OOBM port on the device.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.5
hpicfOpenFlowInstanceMode
This object allows the user to specify the
mode of OpenFlow operation for an instance.
In active mode, new flows get redirected to
the OpenFlow controller. In passive mode,
new flows are not sent to the OpenFlow
co…
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.6
hpicfOpenFlowInstanceFlowLocationMode
This object specifies if the flows for this
instance will be located in hardware only or
in hardware and software. By default, flows
will be located in hardware and software.This
object is applicable only for an Op…
Enumerationr/w
Enumerated Values:
1hardwareOnly
2hardwareAndSoftware
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.7
hpicfOpenFlowConnectionInterruptionMode
This MIB object is used to specify the type
of fallback when the switch loses connection
with the controller. In fail-secure mode,
packets and messages destined to the current
controller are dropped. Flows should c…
Enumerationr/w
Enumerated Values:
1failSecure
2failStandalone
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.8
hpicfOpenFlowInstanceHwRateLimit
This object limits the bandwidth per module
in kilobits per second, that this OpenFlow
instance can utilize. This implementation
supports a minimum rate limit of 0 kbps and
a maximum rate limit of 10000000 kbps.
kilobits per secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.9
hpicfOpenFlowInstanceSwRateLimit
This object limits the number of packets per
second for each module, that this instance
can send to the software path on the CPU.
Increasing the software rate limit would
increase CPU consumption and may impact the
…
packets per secondSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.10
hpicfOpenFlowInstanceDatapathID
Datapath ID(DPID) uniquely identifies a
datapath between this instance and the
controller. Its lower 48-bits are intended for
switch MAC address, while the upper 16-bits
are defined by the implementation.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.11
hpicfOpenFlowInstanceNumOfHwFlows
This object indicates the number of hardware
flows in this OpenFlow instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.12
hpicfOpenFlowInstanceNumOfSwFlows
This object indicates the number of software
flows in this OpenFlow instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.13
hpicfOpenFlowInstanceOperStatus
This object is used to determine the
operational state of an OpenFlow instance.
The reason for operational status to be
down is specified by the
hpicfOpenFlowInstanceOperStatusReason MIB.
Enumeration
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.14
hpicfOpenFlowInstanceMaxBackOffInterval
Interval between two consecutive attempts
made by an instance to reconnect to a
controller increases exponentially till it
reaches the value specified by this MIB
object. All subsequent attempts use this
value as t…
secondsUnsigned32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.15
hpicfOpenFlowInstanceRowStatus
Row status for this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.16
hpicfOpenFlowInstanceProbeInterval
This MIB object specifies the interval
between two consecutive probes sent from
an instance to the controller. This MIB
value also determines how soon the instance
will enter the connection interruption mode.
If th…
secondsUnsigned32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.17
hpicfOpenFlowInstanceProtoVersion
This MIB object specifies the
OpenFlow instance protocol version.
Enumerationr/w
Enumerated Values:
1v1dot0
2v1dot3
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.18
hpicfOpenFlowInstanceProtoVersionOnly
Setting this MIB object to true will support
only the specific version mentioned by
hpicfOpenFlowInstanceProtoVersion MIB and not
compatible with lower versions.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.19
hpicfOpenFlowInstanceNumOfSwFlowTable
This MIB object specifies the number of
software flow tables for this OpenFlow
instance. The maximum value supported is 8.
This object is applicable only for
an OpenFlow version 1.3 instance.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.20
hpicfOpenFlowInstanceOperStatusReason
This MIB object specifies the reason for
hpicfOpenFlowInstanceOperStatus to be down.
Enumeration
Enumerated Values:
1notApplicable
2hardwareResourcesUnavailable
3memberVLANNotConfigured
4memberVLANRemoved
5noValidPortsInMemberVLAN
6controllerVLANNotConfigured
7enableFailedInHardware
8disabled
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.21
hpicfOpenFlowInstanceEgressOnlyPorts
This MIB object specifies the list of egress
only ports for this OpenFlow instance.
Q-BRIDGE-MIBPortList .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.22
hpicfOpenFlowInstanceCapabilities
This MIB object specifies the instance
capabilities exchanged with the controller.
Bits
Enumerated Values:
0flowStatistics
1tableStatistics
2portStatistics
3groupStatistics
4meterStatistics
5blockPorts
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.23
hpicfOpenFlowInstanceHwTableMissCount
This MIB object specifies the number of
packets which do not match any rules in the
hardware table. This object is applicable
only for an OpenFlow version 1.0 instance.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.24
hpicfOpenFlowInstanceTableModel
This MIB object determines the table model
of an OpenFlow instance.
Enumeration
Enumerated Values:
1none
2singleTable
3policyEngineAndSoftware
4ipControlWithPolicyEngineAndSoftware
5customPipeline
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.25
hpicfOpenFlowInstanceMembers
This MIB object is used to add member VLANs to an
OpenFlow instance.
HP-ICF-TCVidListr/w
Type Constraints:
range: 512
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.26
hpicfOpenFlowInstancePipelineModel
This MIB object is used to configure the openflow
instance pipeline model.
A value of 0(none) indicates no table pipeline model
which is equal to standard match.
A value of 1(standardMatch) enables an instance in
adve…
Enumerationr/w
Enumerated Values:
0none
1standardMatch
2ipcontrolTable
3customPipeline
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.27
hpicfOpenFlowInstanceDatapathDesc
This MIB object is a user-defined description of the data
path. If not set, hpicfOpenFlowInstanceName is used.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.28
hpicfOpenFlowInstanceSourceMacGrpTable
This object is used to enable or disable the source
MAC group table in the OpenFlow pipeline. This MIB
object can be set to 'enable' only on one instance.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.29
hpicfOpenFlowInstanceDestMacGrpTable
This object is used to enable or disable the destination
MAC group table in the OpenFlow table. This MIB
object can be set to 'enable' only on one instance.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.30
hpicfOpenFlowInstanceMissRuleDefaultAction
This MIB object is used to configure the flow miss
action associated with the instance.
A value of 0(none) indicates no flow miss action
specified, which is to drop all unknown packets.
A value of 1(drop) enables an in…
Enumerationr/w
Enumerated Values:
0none
1drop
2normal
3ctrl
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.31
hpicfOpenFlowInstanceOverrideProtocol
This MIB object is used to configure the Override
protocol associated with the instance.
Bitsr/w
Enumerated Values:
0stp
1gvrp
2mvrp
3lacp
4dot1x
5udld
6loopprotect
7pvst
8smartlink
9dldp
10bonjour
11traditionalPipeline
31all
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.32
hpicfOpenFlowInstancePktInVlanTagging
This MIB object is used to configure the 802.1q
tagging property for a packet encapsulated inside
the OpenFlow packet-in header.
A value of 0 (default) indicates the default behavior
which is the packet encapsulated ins…
Enumerationr/w
Enumerated Values:
0default
1inputForm
2tagAlways
3untagAlways
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.4.1.33

hpicfOpenFlowInstanceMembershipTable

table deprecated
.1.3.6.1.4.1.11.2.14.11.5.1.89.1.5 · 1 row entry · 1 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOpenFlowInstanceMembershipTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OPENFLOW-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceMembershipTable' 
Table used to add members to OpenFlow instances.
This table is deprecated and instead object
hpicfOpenFlowInstanceMembers is used to configure members 
for an OpenFlow instance.
hpicfOpenFlowInstanceMembershipEntry row .1.3.6.1.4.1.11.2.14.11.5.1.89.1.5.1
A set of objects that are used to add members
to an OpenFlow instance.
Indexes
Column Syntax OID
hpicfOpenFlowInstanceMembershipRowStatusdeprecated
Row status for this member.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.5.1.2

hpicfOpenFlowControllerTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.89.1.6 · 1 row entry · 8 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOpenFlowControllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OPENFLOW-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OPENFLOW-MIB::hpicfOpenFlowControllerTable' 
Table used to configure controllers. For
maximum number of OpenFlow controllers 
that can be supported, refer to 
hpicfOpenFlowMaxControllers MIB object.
hpicfOpenFlowControllerEntry row .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1
A set of objects that are used to configure
OpenFlow Controllers.
Indexes
Column Syntax OID
hpicfOpenFlowControllerID
Unique ID given to a Controller. This will be
associated with an instance through
hpicfOpenFlowInstanceControllerTable.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.1
hpicfOpenFlowControllerInetAddressType
Address type of this controller. This
implementation supports only ipv4 type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.2
hpicfOpenFlowControllerInetAddress
IP Address of the controller.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.3
hpicfOpenFlowControllerPort
The port over which the controller can be
reached.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.4
hpicfOpenFlowControllerInterface
This MIB object specifies an interface over
which the controller is reachable.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.5
hpicfOpenFlowControllerRowStatus
Row status for this table. The
hpicfOpenFlowControllerInetAddress and
hpicfOpenFlowControllerInterface MIB objects
have to be set to valid values to move this
object to 'active' state. This conceptual row
can be de…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.6
hpicfOpenFlowControllerSourceAddressType
Address type of the Source IP. This
implementation supports only ipv4 type.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.7
hpicfOpenFlowControllerSourceAddress
Source IP address to use when connecting
to the controller.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.6.1.8

hpicfOpenFlowInstanceControllerTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.89.1.8 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOpenFlowInstanceControllerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OPENFLOW-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceControllerTable' 
Table that contains objects for connection 
state and status between an OpenFlow instance 
and a controller.
hpicfOpenFlowInstanceControllerEntry row .1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1
A set of objects used to monitor the status
and state of connection between an OpenFlow
instance and controller.
Indexes
Column Syntax OID
hpicfOpenFlowInstanceControllerStatus
Connection status between an OpenFlow
instance and a controller.
Enumeration
Enumerated Values:
1connected
2disconnected
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.1
hpicfOpenFlowInstanceControllerState
Connection state between an OpenFlow
instance and a controller. The state 'void'
implies that there is no connection. The state
'backoff' represents a state where the device
is attempting to reconnect to the controll…
Enumeration
Enumerated Values:
1void
2backoff
3connecting
4active
5idle
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.2
hpicfOpenFlowInstanceControllerRole
Role of a controller in an instance. The
default role of a controller is equal. In this
role, the controller has full access to the
switch and is equal to other controllers in
the same role. In member role, the cont…
Enumeration
Enumerated Values:
1equal
2conductor
3member
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.3
hpicfOpenFlowInstanceControllerConnSecure
This object indicates if the connection
between the controller and instance is secure.
Setting this MIB to true will initiate TLS as
transport protocol.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.4
hpicfOpenFlowInstanceControllerRowStatus
Row status for this table. Row transition to
'createAndWait', 'notReady' and
'notInService' states are not allowed.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.8.1.5

hpicfOpenFlowInstanceMeterTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.89.1.19 · 1 row entry · 5 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOpenFlowInstanceMeterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OPENFLOW-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceMeterTable' 
Table that contains objects related to meters
of an OpenFlow instance. This table is 
populated when meters are configured from 
controller.
hpicfOpenFlowInstanceMeterEntry row .1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1
A set of objects used to retrieve details
about meters associated with an OpenFlow instance.
Indexes
Column Syntax OID
hpicfOpenFlowInstanceMeterID
Unique ID given to a meter.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.1
hpicfOpenFlowInstanceMeterFlowCount
Number of flows on which this meter
is applied.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.2
hpicfOpenFlowInstanceMeterInputPktCount
Number of packets processed by this meter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.3
hpicfOpenFlowInstanceMeterInputByteCount
Number of bytes processed by this meter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.4
hpicfOpenFlowInstanceMeterDuration
Duration for which this meter is active.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.19.1.5

hpicfOpenFlowInstanceMeterBandTable

table
.1.3.6.1.4.1.11.2.14.11.5.1.89.1.20 · 1 row entry · 7 columns
Open in standard view
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfOpenFlowInstanceMeterBandTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-OPENFLOW-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-OPENFLOW-MIB::hpicfOpenFlowInstanceMeterBandTable' 
Table that contains objects related to meter 
bands for a specific meter in an OpenFlow 
instance. This table is populated when meters 
and their bands are configured from controller.
hpicfOpenFlowInstanceMeterBandEntry row .1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1
A set of objects used to retrieve details
about meter bands associated with a meter and
an OpenFlow instance.
Indexes
Column Syntax OID
hpicfOpenFlowInstanceMeterBandID
Unique ID given to a band in a meter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.1
hpicfOpenFlowInstanceMeterBandType
This meter band type determines how the
packets are processed.
Enumeration
Enumerated Values:
1drop
2mark
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.2
hpicfOpenFlowInstanceMeterBandRate
This MIB object specifies the rate beyond
which the incoming packets would be treated
according to action specified by
hpicfOpenFlowInstanceMeterBandType MIB.
The units of this rate is determined by the
hpicfOpenFlo…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.3
hpicfOpenFlowInstanceMeterBandRateUnit
This MIB object specifies the unit for
hpicfOpenFlowInstanceMeterBandRate MIB. The
units can be either kilobits per second or
packets per second.
Enumeration
Enumerated Values:
1kbps
2pps
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.4
hpicfOpenFlowInstanceMeterInBandPktCount
Number of packets processed by this meter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.5
hpicfOpenFlowInstanceMeterInBandByteCount
Number of bytes processed by this meter.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.6
hpicfOpenFlowInstanceMeterPrecedenceLevel
DSCP Precedence level of the band in a meter.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.11.2.14.11.5.1.89.1.20.1.7