HP-ICF-MAD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
6
.1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.1 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfMadLacpAggTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-MAD-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-MAD-MIB::hpicfMadLacpAggTable'
Information describing the MAD configuration 
on LACP trunks.
hpicfMadLacpAggEntry row .1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.1.1
Information describing the MAD configuration
on LACP trunks.
Column Syntax OID
hpicfMadLacpAggTrunkIdA LACP trunk ID to uniquely identify each entry in the table.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.1.1.1
hpicfMadPassthroughLacpAggAdminStatusThe desired administrative state of MAD passthrough on
LACP trunk interface.By default lacp mad passthrough
will be enabled on all LACP trunks.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.1.1.2
.1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk hpicfMadLacpAggPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-MAD-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-MAD-MIB::hpicfMadLacpAggPortStatsTable'
A table that contains MAD( Multi Active Detection) information
of every port that is associated with LACP trunk.
A row appears in this table for each physical port of LACP trunk.
hpicfMadLacpAggPortStatsEntry row .1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1
A list of Link Aggregation Control Protocol statistics
for each port on this device.
Column Syntax OID
hpicfMadLacpAggPortIndexPhysical port to uniquely identify an entry.IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1.1
hpicfMadPassthroughLacpAggPDUsRxThe number of valid LACP PDUs with MAD TLV received on this
aggregation port. This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1.2
hpicfMadPassthroughLacpAggPDUsTxThe number of LACP PDUs with MAD TLV transmitted on this
aggregation port. This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1.3
hpicfMadPassthroughLacpAggPDUsDroppedThe number of LACPDUs with MAD TLV dropped on this
aggregation port. This value is read-only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.14.11.5.1.95.1.1.2.1.4