HP-ICF-DHCPv6-RELAY
The Dynamic Host Configuration Protocol (DHCPv6) is one of
the options available for a Device to obtain IPv6 address
automatically. In a trivial deployment, this is achieved
by having the Client and Server on the same local network.
DHCPv6 Relay is a feature that facilitates IPv6 address
assignment across multiple networks or subnets by forwarding
client service requests and server responses in a transparent
manner.This MIB provides a means to configure and monitor
DHCPv6 Relay feature on the Switch.
- Source file
HP-ICF-DHCPv6-RELAY- Last revised
- Identity
hpicfDhcpv6Relay- Base OID
1.3.6.1.4.1.11.2.14.11.5.1.50
Imported Objects
| HP-ICF-OID | hpSwitch |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | RowStatus |
Net-SNMP examples using the hp MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HP-ICF-DHCPv6-RELAY' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HP-ICF-DHCPv6-RELAY::hpicfDhcpv6Relay'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-ICF-DHCPv6-RELAY' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-ICF-DHCPv6-RELAY::hpicfDhcpv6Relay'
Objects (41)
Showing 41 of 41 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.11.2.14.11.5.1.50 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.50.1 |
|
.1.3.6.1.4.1.11.2.14.11.5.1.50.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1.3 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.2.1.4 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.3 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.3 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.4 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.5 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.3.1.6 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.4 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.1 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.10 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.11 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.12 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.13 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.14 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.15 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.16 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.17 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.18 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.19 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.2 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.3 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.4 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.5 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.6 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.7 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.8 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.5.9 |
||
.1.3.6.1.4.1.11.2.14.11.5.1.50.6 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.14.11.5.1.50.6.1 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- HP-ICF-OIDhp
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- HP-ICF-DHCPv6-RELAYhpselected
Conformance Groups (4)
Compliance Statements (3)
OID
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.2.1The compliance statement for SNMP entities which implement the
hpicfDhcpv6Relay MIB with support for writable objects. Such an
implementation can be both monitored and configured via SNMP.
hpicfDhcpv6Relay MIB with support for writable objects. Such an
implementation can be both monitored and configured via SNMP.
Required groups
| mandatory | hpicfDhcpRelayConfigGroup | |
| mandatory | hpicfDhcpRelayStatsGroup |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.2.2The compliance statement for SNMP entities which implement the
hpicfDhcpv6Relay MIB with support for writable objects. Such an
implementation can be both monitored and configured via SNMP.
hpicfDhcpv6Relay MIB with support for writable objects. Such an
implementation can be both monitored and configured via SNMP.
Required groups
| mandatory | hpicfDhcpRelayConfigGroup | |
| mandatory | hpicfDhcpRelayStatsGroup1 |
OID
.1.3.6.1.4.1.11.2.14.11.5.1.50.4.2.3The compliance statement for SNMP entities which implement the
hpicfDhcpv6Relay MIB with support for writable objects. Such an
implementation can be both monitored and configured via SNMP.
hpicfDhcpv6Relay MIB with support for writable objects. Such an
implementation can be both monitored and configured via SNMP.
Required groups
| mandatory | hpicfDhcpRelayConfigGroup1 | |
| mandatory | hpicfDhcpRelayStatsGroup1 |