HP-ICF-BYOD-MIB Table View

A table of portal servers that BYOD clients can be redirected to.
The total number of servers supported is implementation-dependent.

hpicfByodPortalEntry row .1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1

An entry in the hpicfByodPortalTable.

Indexes

hpicfByodPortalName

Column	Syntax	OID
hpicfByodPortalName This object provides the BYOD server name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.1
hpicfByodPortalVlanId This object provides the VLAN ID this portal is associated with. Clients on the specified VLAN will be redirected to this portal. A value of 0 indicates that this portal is not associated with any VLAN.	Unsigned32r/w Constraints: range: 0-4094	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.2
hpicfByodPortalUrl This object provides the BYOD server URL to redirect clients to.	OctetStringr/w Constraints: range: 1-127	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.3
hpicfByodPortalInetAddrType This object provides the address family of the value in hpicfByodPortalInetAddr.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.4
hpicfByodPortalInetAddr This object provides the IP address of the BYOD server specified in hpicfByodPortalUrl.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.5
hpicfByodPortalDnsCacheTime This object provides the DNS cache time of this portal in seconds.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.6
hpicfByodPortalRowStatus The status of this table entry. The following columns must be set before the row can be made active: - hpicfByodPortalUrl	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.2.1.7

A table of rules to permit other valid traffic such as DNS and
DHCP on a BYOD VLAN.  The total number of entries allowed is
implementation-dependent.

hpicfByodFreeRuleEntry row .1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1

An entry in the hpicfByodFreeRuleTable.

Indexes

hpicfByodFreeRuleNumber

Column	Syntax	OID
hpicfByodFreeRuleNumber This object provides the rule number.	Unsigned32 Constraints: range: 0-59	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.1
hpicfByodFreeRuleSourceProtocol This object provides the source protocol to permit.	Enumerationr/w Enumerated Values: 1 tcp 2 udp	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.2
hpicfByodFreeRuleSourcePort This object provides the TCP or UDP source port to permit.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.3
hpicfByodFreeRuleSourceVlanId This object provides the source VLAN ID to permit.	Unsigned32r/w Constraints: range: 1-4094	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.4
hpicfByodFreeRuleSourceInetAddrType This object provides the address family of the value in hpicfByodFreeRuleSourceInetAddr. Some agents may limit the type to IPv4 only.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.5
hpicfByodFreeRuleSourceInetAddr This object provides the source IP address to permit.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.6
hpicfByodFreeRuleSourceInetAddrMask This object provides the source IP address mask to apply to hpicfByodFreeRuleSourceInetAddr.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.7
hpicfByodFreeRuleDestinationProtocol This object provides the destination protocol to permit.	Enumerationr/w Enumerated Values: 1 tcp 2 udp	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.8
hpicfByodFreeRuleDestinationPort This object provides the TCP or UDP destination port to permit.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.9
hpicfByodFreeRuleDestinationInetAddrType This object provides the address family of the value in hpicfByodFreeRuleDestinationInetAddr. Some agents may limit the type to IPv4 only.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.10
hpicfByodFreeRuleDestinationInetAddr This object provides the destination IP address to permit.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.11
hpicfByodFreeRuleDestinationInetAddrMask This object provides the destination IP address mask to apply to hpicfByodFreeRuleDestinationInetAddr.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.12
hpicfByodFreeRuleRowStatus The status of this table entry. The following columns must be set before the row can be made active: - hpicfByodFreeRuleSourceVlanId - hpicfByodFreeRuleSourceInetAddrType - hpicfByodFreeRuleSourceInetAdd…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.14.11.5.1.106.1.1.3.1.13