HNE-DEVICE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
29

hneWiFiGWTable

table
.1.3.6.1.4.1.4115.1.20.3.1.1.2 · 1 row entry · 19 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk hneWiFiGWTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HNE-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HNE-DEVICE-MIB::hneWiFiGWTable' 
A table of Home Networking Extenders that have attempted to connect to the WiFi Gateway.
hneWiFiGWEntry row .1.3.6.1.4.1.4115.1.20.3.1.1.2.1
A row in the table of the Home Networking Extender table.
Indexes
Column Syntax OID
hneWiFiGWIndex
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.1
hneWiFiGWMACAddr
The MAC Address of the Home Networking Extender.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.2
hneWiFiGWIPAddrType
IP Address type of the Home Networking Extender.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.3
hneWiFiGWIPAddress
IP Address of the Home Networking Extender.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.4
hneWiFiGWARRISAutoCfgSupport
Indicates if the GW determined if the Home Networking Extender supports the ARRIS auto-configuration protocol.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.5
hneWiFiGWLocation
The URL from the location header field of the NOTIFY/M-SEARCH response of device discovery.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.6
hneWiFiGWManufacturer
The manufacturer of the Home Networking Extender from the device description during discovery.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.7
hneWiFiGWModelName
The model name of the Home Networking Extender from the device description during discovery.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.8
hneWiFiGWModelNumber
The model number of the Home Networking Extender from the device description during discovery.
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.9
hneWiFiGWConfigurationId
Represents the current configuration of the Home Networking Extender.
Unsigned32
Constraints:
range: 0-16777215
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.10
hneWiFiGWLastSynchAttemptTime
Timestamp of the last synchronization attempt of the Home Networking Extender.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.11
hneWiFiGWLastSynchAttemptResult
Indicates whether the last synchronization case passed or failed with failure reason.
Enumeration
Enumerated Values:
-1uninitialized
0pass
1failHTTPSSessionEstablishment
2failHTTPSPUT
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.12
hneWiFiGWSynchedWithGW
Indicates if the Home Networking Extender is synchronized with the WiFi Gateway.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.13
hneWiFiGWOverride24OutputPower
Sets the output power relative to the hardware's maximum capability.
This value is for the 2.4 GHz radio. This value overrides the gateway
value set via wecbWiFiOutputPower.
A value of 0 indicates to use the value in t…
Enumerationr/w
Enumerated Values:
0gatewayDefault
12percent12
25percent25
50percent50
75percent75
100percent100
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.14
hneWiFiGWOverride50OutputPower
Sets the output power relative to the hardware's maximum capability.
This value is for the 5.0 GHz radio. This value overrides the gateway
value set via wecbWiFi50OutputPower.
A value of 0 indicates to use the value in…
Enumerationr/w
Enumerated Values:
0gatewayDefault
12percent12
25percent25
50percent50
75percent75
100percent100
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.15
hneWiFiGWOverride24Channel
Controls and reflects the current channel number (802.11g) or
control channel (802.11n).

If set to (0), the device will be put in auto-channel mode where it automatically scans
for the least-crowded chan…
Unsigned32r/w
Constraints:
range: 0-216
range: 255-255
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.16
hneWiFiGWOverride50Channel
Controls and reflects the current channel number on the 5.0 GHz radio (802.11 a/n).

If set to (0), the device will be put in auto-channel mode where it automatically scans
for the least-crowded channel.
…
Unsigned32r/w
Constraints:
range: 0-216
range: 255-255
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.17
hneWiFiGWOverride24ChannelBW
Determines which Band Width that we will be operating in. Either the 20MHz or the 40MHz.
Note: This is for 802.11n mode only.

This value overrides the gateway value set via wecbWiFiChannelBW.
…
Enumerationr/w
Enumerated Values:
-2gatewayDefault
-1unknown
0width20MHz
1width40MHz
2width20and40Mhz
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.18
hneWiFiGWOverride50ChannelBW
Determines which Band Width that we will be operating in. Either the 20MHz 40MHz or 80MHz.
Note: This is for 802.11n mode only.

This value overrides the gateway value set via wecbWiFi50ChannelBW.
…
Enumerationr/w
Enumerated Values:
-2gatewayDefault
-1unknown
0width20MHz
2width20and40Mhz
3width20and40and80Mhz
 .1.3.6.1.4.1.4115.1.20.3.1.1.2.1.19

hneWiFiGWSupportedTable

table
.1.3.6.1.4.1.4115.1.20.3.1.1.3 · 1 row entry · 4 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk hneWiFiGWSupportedTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HNE-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HNE-DEVICE-MIB::hneWiFiGWSupportedTable' 
A table of Home Networking Extenders that are supported by the Wi-Fi GW.
hneWiFiGWSupportedEntry row .1.3.6.1.4.1.4115.1.20.3.1.1.3.1
A row in the table of the supported Home Networking Extender table.
Indexes
Column Syntax OID
hneWiFiGWSupportedIndex
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4115.1.20.3.1.1.3.1.1
hneWiFiGWSupportedManufacturer
Manufacturer for the supported Home Networking Extenders.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.20.3.1.1.3.1.2
hneWiFiGWSupportedModelNumber
Model number for the supported Home Networking Extenders.
OctetStringr/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4115.1.20.3.1.1.3.1.3
hneWiFiGWSupportedRowStatus
Row status for the supported Home Networking Extender entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4115.1.20.3.1.1.3.1.4

hneLANTable

table
.1.3.6.1.4.1.4115.1.20.3.1.2.1 · 1 row entry · 6 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk hneLANTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HNE-DEVICE-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HNE-DEVICE-MIB::hneLANTable' 
A table of the LAN interfaces on the Home Networking Extenders connected to
the WiFi Gateway.
hneLANEntry row .1.3.6.1.4.1.4115.1.20.3.1.2.1.1
A row in the table of the Home Networking Extender VLAN table.
Indexes
Column Syntax OID
hneLANIndex
Indicates the instance of this table row.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4115.1.20.3.1.2.1.1.1
hneLANGWMappingIndex
The value is hneWiFiGWIndex in the hneWiFiGWTable that correlates to the specific Home
Networking Extender being added to this HNE LAN table on the Gateway.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4115.1.20.3.1.2.1.1.2
hneLANInterface
TR-181i2 Interface object of the specific HNE LAN-side interface.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.20.3.1.2.1.1.3
hneLANInterfaceType
Indicates the interface type.
Enumeration
Enumerated Values:
0radio24Ghz
1radio50Ghz
2radio24GhzSsid
3radio50GhzSsid
4ethernet
 .1.3.6.1.4.1.4115.1.20.3.1.2.1.1.4
hneLANBridgingMgmtPortInterface
TR-181i2 Bridge Port Table path name for management port entry for the specific HNE interface.
Note: This column is not valid for hneLANInterfaceType values of 'radio24Ghz' and 'radio50Ghz'.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.4115.1.20.3.1.2.1.1.5
hneLANVLANID
Indicates the VLAN ID to be used for this VLAN mapping.
Note: This column is not valid for hneLANInterfaceType values of 'radio24Ghz' and 'radio50Ghz'.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4115.1.20.3.1.2.1.1.6