HMIT-SW-PORT-MGR-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
21
hmITPortmgrTable
table.1.3.6.1.4.1.248.100.1.6.3.1.13.2
·
1 row entry
·
21 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hmITPortmgrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HMIT-SW-PORT-MGR-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HMIT-SW-PORT-MGR-MIB::hmITPortmgrTable'
The configuration table of the ports on the switch.
The configuration information of the port on the switch.
Indexes
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The index of the port.
|
Integer32 Constraints: range: 1-2147483647 |
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.1 |
||||||||||||||||||||
|
The managed link status of the port, 1 - no shutdwon(Enable),
2 - shutdown(Disable). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.2 |
||||||||||||||||||||
|
The description of the port.
|
OctetStringr/w Constraints: range: 0-240 |
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.3 |
||||||||||||||||||||
|
The managed duplex mode of the port, 1 - auto,
2 - half, 3 - full |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.4 |
||||||||||||||||||||
|
The managed speed of the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.5 |
||||||||||||||||||||
|
The flow control of the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.6 |
||||||||||||||||||||
|
The mdix mode of the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.7 |
||||||||||||||||||||
|
The MTU length of the port, its range from 64 to 12288.
|
Integer32r/w Constraints: range: 64-12288 |
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.8 |
||||||||||||||||||||
|
The delay time of the actual link status of the port
from be down to be reported, measured by the second. When value is 0, it means to be reported immediately. its available value is 0, and from 2 to 10. |
Integer32r/w Constraints: range: 0-10 |
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.9 |
||||||||||||||||||||
|
Loopback test on the port, don't save its configuration.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.10 |
||||||||||||||||||||
|
The actual link status of the port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.11 |
||||||||||||||||||||
|
The actual duplex mode of the port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.12 |
||||||||||||||||||||
|
The actual speed of the port, measured by Mbps
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.13 |
||||||||||||||||||||
|
The physical type of the port, 1 - copper, 2 - fiber
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.14 |
||||||||||||||||||||
|
The MAC address of the port.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.15 |
||||||||||||||||||||
|
The physical ability of the port.
|
SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.16 |
||||||||||||||||||||
|
The port mode of the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.17 |
||||||||||||||||||||
|
The jumbo status of the port.
|
Integer32r/w Constraints: range: 1-10 |
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.18 |
||||||||||||||||||||
|
The medium type of the port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.19 |
||||||||||||||||||||
|
The peer description of the port.
|
OctetStringr/w Constraints: range: 0-240 |
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.20 |
||||||||||||||||||||
|
No longer in use.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.100.1.6.3.1.13.2.1.21 |