HM2-WWAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hm2WwanDataConnectionTable

table

.1.3.6.1.4.1.248.11.125.1.2.1 · 1 row entry · 29 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2WwanDataConnectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-WWAN-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-WWAN-MIB::hm2WwanDataConnectionTable'

This table contains configuration options for each
WWAN Data connection per SIM card.

hm2WwanDataConnectionEntry row .1.3.6.1.4.1.248.11.125.1.2.1.1

The entries of the table.

Indexes

hm2WwanDataConnectionSimId

Column Syntax OID

hm2WwanDataConnectionSimId

SIM ID for which this connection entry belongs to. Also
used as the table's index.

Hm2SimCardsListIndex

Type Values:

0	sim1
1	sim2
2	sim3
3	sim4

.1.3.6.1.4.1.248.11.125.1.2.1.1.1

hm2WwanDataConnectionAdminStatus

Operational mode of the connection.

HM2-TC-MIBHmEnabledStatusr/w

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.125.1.2.1.1.2

hm2WwanDataConnectionApn

Access Point Name used to identify the data connection's
gateway name in the carriers network. If empty then the
default APN configured on the SIM card will be used. APN
value change while the connection is active, will…

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.248.11.125.1.2.1.1.3

hm2WwanDataConnectionApnCurrent

Current Access Point Name used for data connections. If
hm2WwanDataConnectionApn is empty then the value shown here
represents the automatically detected APN stored on the
Sim Card.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.248.11.125.1.2.1.1.4

hm2WwanDataConnectionUser

User name used for authentication when settting up a new
data connection. Empty value means its not required.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.248.11.125.1.2.1.1.5

hm2WwanDataConnectionPassword

Pasword asociated with the user name used for authentication
when settting up a new data connection. Not readable by the user.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.248.11.125.1.2.1.1.6

hm2WwanDataConnectionAuth

The type of authentication used when setting up a data
connection.

Hm2AuthTyper/w

Type Values:

1	none
2	pap
3	chap
4	papchap

.1.3.6.1.4.1.248.11.125.1.2.1.1.7

hm2WwanDataConnectionPdpType

The IP type of the data connection to set up. It can be
IPv4 or IPv6. Currently only IPv4 is supported.

Hm2PdpTyper/w

Type Values:

1	ipv4
2	ipv6
3	ipv4v6

.1.3.6.1.4.1.248.11.125.1.2.1.1.8

hm2WwanDataConnectionIpAddressType

hm2WwanDataConnectionIpAddress value type, either IPv4
or IPv6.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.125.1.2.1.1.9

hm2WwanDataConnectionIpAddress

Manual IP address to be used for configuring a new data
connection. If 0.0.0.0 then a dynamic IP Address will be
assigned by the carrier.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.125.1.2.1.1.10

hm2WwanDataConnectionDnsPrimaryType

hm2WwanDataConnectionDnsPrimary value type, either IPv4
or IPv6.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.125.1.2.1.1.11

hm2WwanDataConnectionDnsPrimary

Manual IP address to be used for configuring the primary
DNS server address for the data connection. If 0.0.0.0
then a dynamic DNS IP Address will be assigned by the carrier.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.125.1.2.1.1.12

hm2WwanDataConnectionDnsSecondaryType

hm2WwanDataConnectionDnsSecondary value type, either IPv4
or IPv6.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.125.1.2.1.1.13

hm2WwanDataConnectionDnsSecondary

Manual IP address to be used for configuring the secondary
DNS server address for the data connection. If 0.0.0.0
then a dynamic DNS IP Address will be assigned by the carrier.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.125.1.2.1.1.14

hm2WwanDataConnectionIpAddressCurrentType

hm2WwanDataConnectionIpAddressCurrent value type, either IPv4
or IPv6.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.125.1.2.1.1.15

hm2WwanDataConnectionIpAddressCurrent

The IP Address that the WWAN data interface is currently
using.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.125.1.2.1.1.16

hm2WwanDataConnectionDnsPrimaryCurrentType

hm2WwanDataConnectionDnsPrimaryCurrent value type, either IPv4
or IPv6.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.125.1.2.1.1.17

hm2WwanDataConnectionDnsPrimaryCurrent

The Primary DNS Address that the WWAN data interface
is currently using.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.125.1.2.1.1.18

hm2WwanDataConnectionDnsSecondaryCurrentType

hm2WwanDataConnectionDnsSecondaryCurrent value type, either IPv4
or IPv6.

INET-ADDRESS-MIBInetAddressType

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.125.1.2.1.1.19

hm2WwanDataConnectionDnsSecondaryCurrent

The Secondary DNS Address that the WWAN data interface
is currently using.

INET-ADDRESS-MIBInetAddress

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.125.1.2.1.1.20

hm2WwanDataConnectionMtu

Maximum Transmision Unit used when sending IP packets
over the WWAN data interface. The MTU value is reported
by the wwan modem.

Integer32

Constraints:
range: 0-1500

.1.3.6.1.4.1.248.11.125.1.2.1.1.21

hm2WwanDataConnectionFailedRetry

How many times should a failed WWAN data connection
attempt to try reconnecting before aborting and using
fallback options or logging error. A value of 0 means
no retry attempts and a value of -1 means 'infinite'
attem…

Integer32r/w

Constraints:
range: -1-32

.1.3.6.1.4.1.248.11.125.1.2.1.1.22

hm2WwanDataConnectionFailedRetryCurrent

The current number o data reconnect attempts made.
Value 0 means no retries have been made.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.125.1.2.1.1.23

hm2WwanDataConnectionStatus

Current status of this WWAN Data connection. If in 'Error'
state then a reason for the error will be found under
hm2WwanDataConnectionStatusErrorReason.

Hm2ConnectionStatus

Type Values:

1	inactive
2	active
3	idle
4	connecting
5	reconnecting
6	failure

.1.3.6.1.4.1.248.11.125.1.2.1.1.24

hm2WwanDataConnectionStatusErrorReason

The reason why this WWAN Data connection is in 'Error'
state.

HM2-TC-MIBHmLargeDisplayString

Type Constraints:
range: 0..1024

.1.3.6.1.4.1.248.11.125.1.2.1.1.25

hm2WwanDataConnectionActivatedCount

How many times this WWAN Data connection was successfuly
established.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.125.1.2.1.1.26

hm2WwanDataConnectionStartTime

Time in seconds since Jan 1, 1970.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.125.1.2.1.1.27

hm2WwanDataConnectionUpTime

Time in seconds since this connection is active.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.125.1.2.1.1.28

hm2WwanDataConnectionTotalUpTime

Total time in which this connection was active.

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.125.1.2.1.1.29

hm2WwanDataPlanTable

table

.1.3.6.1.4.1.248.11.125.1.2.2 · 1 row entry · 10 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2WwanDataPlanTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-WWAN-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-WWAN-MIB::hm2WwanDataPlanTable'

This table contains configuration options for each
WWAN Data Plan per SIM card.

hm2WwanDataPlanEntry row .1.3.6.1.4.1.248.11.125.1.2.2.1

The entries of the table.

Indexes

hm2WwanDataPlanSimId

Column Syntax OID

hm2WwanDataPlanSimId

SIM ID for which this connection entry belongs. Also
used as the table's index.

Hm2SimCardsListIndex

Type Values:

0	sim1
1	sim2
2	sim3
3	sim4

.1.3.6.1.4.1.248.11.125.1.2.2.1.1

hm2WwanDataPlanMonthlyLimit

The amount of data that the carrier will charge as
per a WWAN data contract per month. A value 0 means
unlimited.

SNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.248.11.125.1.2.2.1.2

hm2WwanDataPlanLimitMeasureUnit

Which measure unit is used to interpret the volume
of the data traffic. Possible units are: Kilobytes,
Megabytes, Gigabytes.

Hm2LimitUnitr/w

Type Values:

1	kb
2	mb
3	gb

.1.3.6.1.4.1.248.11.125.1.2.2.1.3

hm2WwanDataPlanWarningThreshold

The percentage of the volume of data that when reached
will generate a warning. A value of 0 will disable the
warning.

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.248.11.125.1.2.2.1.4

hm2WwanDataPlanReset

Manually reset the data plan counters. Only the value
'action(2)' can be written and when read 'noop(1)' will
always be returned.

HM2-TC-MIBHmActionValuer/w

Type Values:

1	noop
2	action

.1.3.6.1.4.1.248.11.125.1.2.2.1.5

hm2WwanDataPlanResetDay

Which day of the month will be used to auto reset the data
plan counters. A value of 0 will disable the reset action.
The reset action will be performed at 00:00am in the
selected day.

Integer32r/w

Constraints:
range: 0-31

.1.3.6.1.4.1.248.11.125.1.2.2.1.6

hm2WwanDataPlanLastReset

Time in seconds since Jan 1st, 1970 when the last data
plan counters were resetted.

HM2-TC-MIBHmTimeSeconds1970

.1.3.6.1.4.1.248.11.125.1.2.2.1.7

hm2WwanDataPlanCutoffThreshold

The percentage of the volume of used data that when reached
will completely disable any data connections associated with
this SIM ID. A value of 0 will disable the cutoff.

SNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.125.1.2.2.1.8

hm2WwanDataPlanMonthlyUsageTx

The amount of data that was transmitted since last reset. The
measure unit is the same as hm2WwanDataPlanLimitMeasureUnit.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.2.1.9

hm2WwanDataPlanMonthlyUsageRx

The amount of data that was received since last reset. The
measure unit is the same as hm2WwanDataPlanLimitMeasureUnit.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.2.1.10

hm2WwanDataPacketStatsTable

table

.1.3.6.1.4.1.248.11.125.1.2.3 · 1 row entry · 11 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2WwanDataPacketStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-WWAN-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-WWAN-MIB::hm2WwanDataPacketStatsTable'

This table contains packet statistics for each
WWAN Data connection per SIM card.

hm2WwanDataPacketStatsEntry row .1.3.6.1.4.1.248.11.125.1.2.3.1

The entries of the table.

Indexes

hm2WwanDataPacketStatsSimId

Column Syntax OID

hm2WwanDataPacketStatsSimId

SIM ID for which this data connection packet statistics
entry belongs to. Also used as the table's index.

Hm2SimCardsListIndex

Type Values:

0	sim1
1	sim2
2	sim3
3	sim4

.1.3.6.1.4.1.248.11.125.1.2.3.1.1

hm2WwanDataPacketStatsTxOk

The number of successfully transmitted data packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.2

hm2WwanDataPacketStatsRxOk

The number of successfully received data packets.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.3

hm2WwanDataPacketStatsTxErrors

The number of errors encountered during packet transmission.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.4

hm2WwanDataPacketStatsRxErrors

The number of errors encountered during packet reception.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.5

hm2WwanDataPacketStatsTxOverflows

The number of overflows encountered during packet transmission.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.6

hm2WwanDataPacketStatsRxOverflows

The number of overflows encountered during packet reception.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.7

hm2WwanDataPacketStatsTxBytesOk

The number of successfully transmitted bytes.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.8

hm2WwanDataPacketStatsRxBytesOk

The number of successfully received bytes.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.9

hm2WwanDataPacketStatsTxDropped

The number of packets dropped during transmission.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.10

hm2WwanDataPacketStatsRxDropped

The number of packets dropped during reception.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.248.11.125.1.2.3.1.11

hm2WwanSimCardTable

table

.1.3.6.1.4.1.248.11.125.1.3.1 · 1 row entry · 15 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2WwanSimCardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-WWAN-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-WWAN-MIB::hm2WwanSimCardTable'

This table contains configuration options for each
WWAN SIM card.

hm2WwanSimCardEntry row .1.3.6.1.4.1.248.11.125.1.3.1.1

The entries of the table.

Indexes

hm2WwanSimCardSimId

Column Syntax OID

hm2WwanSimCardSimId

SIM ID for which this connection entry belongs. Also
used as the table's index.

Hm2SimCardsListIndex

Type Values:

0	sim1
1	sim2
2	sim3
3	sim4

.1.3.6.1.4.1.248.11.125.1.3.1.1.1

hm2WwanSimCardAdminStatus

Sim Card enable/disable function.

HM2-TC-MIBHmEnabledStatusr/w

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.125.1.3.1.1.2

hm2WwanSimCardRole

The role this Sim Card will be assigned. The role is
important for failover scenarios configured under
General Configuration Group. 'auto' setting will
automatically choose a role.

Hm2SimCardRoler/w

Type Values:

1	auto
2	primary
3	backup

.1.3.6.1.4.1.248.11.125.1.3.1.1.3

hm2WwanSimCardRoleCurrent

The role this Sim Card is currently using.

Hm2SimCardRole

Type Values:

1	auto
2	primary
3	backup

.1.3.6.1.4.1.248.11.125.1.3.1.1.4

hm2WwanSimCardStatus

Sim Card Status information:
* simPresent: the SIM is physicaly present.
* simAbsent: the SIM is physicaly absent.
* simLocked: the SIM is physicaly present
but was not unlocked using PIN1.
* simUnlocked: t…

Hm2SimCardStatus

Type Values:

1	simPresent
2	simAbsent
3	simLocked
4	simUnlocked
5	simInactive
6	simActive

.1.3.6.1.4.1.248.11.125.1.3.1.1.5

hm2WwanSimCardSetActive

Manual operation to set the active status of this
sim card. When in active state this sim card will be
used for establishing data connections.

HM2-TC-MIBHmActionValuer/w

Type Values:

1	noop
2	action

.1.3.6.1.4.1.248.11.125.1.3.1.1.6

hm2WwanSimCardPin1

Sim Card's PIN1 code. PIN1 is used to unlock main Sim
functions which will allow Network Carrier Registration.

OctetStringr/w

Constraints:
range: 4-8
range: 0-0

.1.3.6.1.4.1.248.11.125.1.3.1.1.7

hm2WwanSimCardPin1Mode

Allows to enable or disable PIN1 code. With PIN1 disabled
the Sim Card will automatically unlock all it's functions.

HM2-TC-MIBHmEnabledStatusr/w

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.125.1.3.1.1.8

hm2WwanSimCardPin1Status

Pin1 status information:
* NotVerified: Pin1 was not verified.
* Verified: Pin1 was successfuly verified.
* Blocked: Wrong Pin1 was used too many times
and the Sim Card blocked it.
* Disabled: Pin1 was manual…

Hm2Pin1Status

Type Values:

1	notVerified
2	verified
3	blocked
4	disabled
5	wrongCode

.1.3.6.1.4.1.248.11.125.1.3.1.1.9

hm2WwanSimCardPin1VerifyTries

The amount of times a wrong Pin1 code can be used
to unlock the Sim Card until it is blocked.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.125.1.3.1.1.10

hm2WwanSimCardPin1UnblockTries

The amount of times a wrong PUK1 code can be entered
to unblock a PIN1 code.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.125.1.3.1.1.11

hm2WwanSimCardPuk1

PUK1 code is used to unblock a PIN1 code. Writing a PUK1
value will attempt to unblock a PIN1 code if the PIN1 code
is in 'Blocked' state. PUK1 code will not be saved.
hm2WwanSimCardPin1UnblockTries is a counter on how …

OctetStringr/w

Constraints:
range: 0-8

.1.3.6.1.4.1.248.11.125.1.3.1.1.12

hm2WwanSimCardRoamingMode

Roaming will allow the modem to perform registration
with carriers other than the one that emitted the current
SIM card. Data connections established when attached to
Roaming partners will probably incur additional cost…

HM2-TC-MIBHmEnabledStatusr/w

Type Values:

1	enable
2	disable

.1.3.6.1.4.1.248.11.125.1.3.1.1.13

hm2WwanSimCardIccid

Integrated Circuit Card Identifier is the international
SIM's identifier. This value is preserved over reboots
so that when a new SIM is inserted the operation can be
detected and the settings relevant for the old SIM …

OctetStringr/w

Constraints:
range: 22-22
range: 0-0

.1.3.6.1.4.1.248.11.125.1.3.1.1.14

hm2WwanSimCardImsi

International Mobile Subscriber Identity is an individual
identifier on operator networks. Mobile network operators
connect mobile phone calls and communicate with their market
SIM cards using their IMSIs.

OctetString

Constraints:
range: 15-15
range: 0-0

.1.3.6.1.4.1.248.11.125.1.3.1.1.15