HM2-POE-MIB Table View

This table contains objects for each power supply type of
the device (internal or external power supply).

hm2PoeMgmtPsuEntry row .1.3.6.1.4.1.248.11.12.1.1.2.1

The entries of the hm2PoeMgmtPsuTable.

Indexes

hm2PoeMgmtModulePowerSource

Column	Syntax	OID
hm2PoeMgmtPsuPower The power budget per psu type expressed in Watts. Psu types could be internal or external.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.2.1.1
hm2PoeMgmtPsuReservedPower The reserved power (depending on actual power classes) per psu type expressed in Watts.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.2.1.2
hm2PoeMgmtPsuDeliveredPower The measured usage power per psu type expressed in Watts.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.2.1.3
hm2PoeMgmtPsuDeliveredCurrent The measured current delivered per psu type expressed in milliamperes	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.2.1.4

This table contains objects for each Power over Ethernet interface of
the device.

hm2PoeMgmtPortEntry row .1.3.6.1.4.1.248.11.12.1.1.3.1

The entry of the hm2PoeMgmtPortTable.

Indexes

HM2-DEVMGMT-MIBhm2IfacePhysIndex

Column	Syntax	OID
hm2PoeMgmtPortAdminEnable enable (1) An interface which can provide the PSE functions. disable(2) The interface will act - as it would - if it had no PSE function.	HM2-TC-MIBHmEnabledStatusr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.248.11.12.1.1.3.1.1
hm2PoeMgmtPortConsumptionPower Measured usage power per interface expressed in Milliwatts.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.3.1.2
hm2PoeMgmtPortDetectionStatus Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - indicates that the PSE State diagram is i…	Enumeration Enumerated Values: 1 disabled 2 searching 3 deliveringPower 4 fault 5 test 6 otherFault	.1.3.6.1.4.1.248.11.12.1.1.3.1.3
hm2PoeMgmtPortPowerPriority This object controls the priority of the port from the point of view of a power management algorithm. The priority that is set by this variable could be used by a control mechanism that prevents over current situations…	Enumerationr/w Enumerated Values: 1 critical 2 high 3 low	.1.3.6.1.4.1.248.11.12.1.1.3.1.4
hm2PoeMgmtPortPowerClassification Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration Enumerated Values: 1 class0 2 class1 3 class2 4 class3 5 class4	.1.3.6.1.4.1.248.11.12.1.1.3.1.5
hm2PoeMgmtPortName A manager will set the value of this variable to indicate the type of powered device that is connected to the port. The default value supplied by the agent if no value has ever been set should be a zero-length octet str…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.248.11.12.1.1.3.1.6
hm2PoeMgmtPortAllowedClassBits Bit mask which defines allowed classes per interface.	Bitsr/w Enumerated Values: 0 class0 1 class1 2 class2 3 class3 4 class4	.1.3.6.1.4.1.248.11.12.1.1.3.1.7
hm2PoeMgmtPortAutoShutdown Enables/disables automatic shutdown functionality per interface.	HM2-TC-MIBHmEnabledStatusr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.248.11.12.1.1.3.1.8
hm2PoeMgmtPortAutoShutdownTimeStart Start time for the automatic shutdown functionality per interface.	HM2-TC-MIBHmTimeHHMM24r/w Type Constraints: range: 0..5	.1.3.6.1.4.1.248.11.12.1.1.3.1.9
hm2PoeMgmtPortAutoShutdownTimeEnd End time for the automatic shutdown functionality per interface.	HM2-TC-MIBHmTimeHHMM24r/w Type Constraints: range: 0..5	.1.3.6.1.4.1.248.11.12.1.1.3.1.10
hm2PoeMgmtPortClassValid Evaluates if class represented through pethPsePortPowerClassifications is valid or not. Class is valid if PD is delivered with power or in case of power exceeding through a connected device.	Enumeration Enumerated Values: 0 invalid 1 valid	.1.3.6.1.4.1.248.11.12.1.1.3.1.11
hm2PoeMgmtPortFastStartup Enables/disables Power over Ethernet fast startup mode on given port. The default value is 'disable'.	HM2-TC-MIBHmEnabledStatusr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.248.11.12.1.1.3.1.12
hm2PoeMgmtPortMaxConsumptionPower The maximum observed power consumption (hm2PoeMgmtPortMaxConsumptionPower) value expressed in milliwatts used by the PD. The value is reset to 0 if the PoE admin state is set to disable or if a disconnect of the PD is …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.3.1.13
hm2PoeMgmtPortPowerLimit The power limit per port expressed in milliwatts. If set to zero the power consumption limitation is disabled.	Integer32r/w Constraints: range: 0-30000	.1.3.6.1.4.1.248.11.12.1.1.3.1.14
hm2PoeMgmtPortConsumptionCurrent Measured current consumption per interface expressed in milliamperes (mA).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.3.1.15

This table contains objects for each plugged PoE module of
the device. If the device is non-modular and supports PoE it
contains only one entry.

hm2PoeMgmtModuleEntry row .1.3.6.1.4.1.248.11.12.1.1.4.1

The entries of the hm2PoeMgmtModuleTable.

Indexes

hm2PoeMgmtModuleUnitIndex hm2PoeMgmtModuleSlotIndex

Column	Syntax	OID
hm2PoeMgmtModuleUnitIndex Unit number - for stacking devices.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.4.1.1
hm2PoeMgmtModuleSlotIndex Slot number of the plugged PoE module.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.4.1.2
hm2PoeMgmtModulePower Configurable power budget per module expressed in Watts. The default value is hm2PoeMgmtModuleMaximumPower and depends on the hardware.	Integer32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.248.11.12.1.1.4.1.3
hm2PoeMgmtModuleMaximumPower Maximum available power budget per module expressed in Watts. This value depends on the device or module.	Integer32 Constraints: range: 0-1000	.1.3.6.1.4.1.248.11.12.1.1.4.1.4
hm2PoeMgmtModuleReservedPower The reserved power (depending on actual power classes) per module expressed in Watts.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.4.1.5
hm2PoeMgmtModuleDeliveredPower The measured usage power per module expressed in Watts.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.4.1.6
hm2PoeMgmtModulePowerSource This object displays the type of the PoE power source. internal (0) means that the PoE power is used from the internal PSU and external (1) means that a external PoE PSU must be installed and connected to this module.	Enumeration Enumerated Values: 0 internal 1 external	.1.3.6.1.4.1.248.11.12.1.1.4.1.7
hm2PoeMgmtModuleUsageThreshold The usage power threshold per module expressed in percent. If this threshold is exceeded a alarm is initiated.	Integer32r/w Constraints: range: 1-99	.1.3.6.1.4.1.248.11.12.1.1.4.1.8
hm2PoeMgmtModuleNotificationControlEnable This object controls, on a per-module basis, whether or not notifications from the agent are enabled.	HM2-TC-MIBHmEnabledStatusr/w Type Values: 1 enable 2 disable	.1.3.6.1.4.1.248.11.12.1.1.4.1.9
hm2PoeMgmtModuleDeliveredCurrent The measured current consumption per module expressed in milliamperes (mA).	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.11.12.1.1.4.1.10