HM2-PLATFORM-SWITCHING-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
53
Rows
53
Columns
292
.1.3.6.1.4.1.248.12.1.2.2.2
·
1 row entry
·
15 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentLagSummaryConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentLagSummaryConfigTable'
A summary table of the switch's LAG config entries
Switch's LAG config entry
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Agent LAG IfIndex.
This value corresponds with the LAG interface in the ifTable. |
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.248.12.1.2.2.2.1.1 |
||||||||||||||
|
Agent LAG Name.
The associated name of the LAG used during creation. |
OctetStringr/w Constraints: range: 1-15 |
.1.3.6.1.4.1.248.12.1.2.2.2.1.2 |
||||||||||||||
|
hm2AgentLagSummaryFlushTimerobsolete
Agent LAG FlushTimer.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.2.2.1.3 |
||||||||||||||
|
Agent LAG LinkTrap.
Configures sending Link Up/Down traps when the LAG interface goes Up or Down. |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.2.2.1.4 |
||||||||||||||
|
Agent LAG AdminMode.
Administratively enables or disables this LAG interface. |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.2.2.1.5 |
||||||||||||||
|
Agent LAG StpMode
Administratively enables or disables STP on this interface. |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.2.2.1.6 |
||||||||||||||
|
Agent LAG AddPort.
Set to a non 0 value to add a port to the LAG. Values correspond to ifIndex values in the ifTable. Note: agentPortType for the port to be added must be full duplex and t… |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.2.2.1.7 |
||||||||||||||
|
Agent LAG DeletePort.
Set to a non 0 value to remove a port from the LAG. Values correspond to ifIndex values in the ifTable. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.2.2.1.8 |
||||||||||||||
|
Agent LAG Status.
active(1) - This LAG is enabled. destroy(6) - Set to this value to remove the LAG. |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.2.2.1.9 |
||||||||||||||
|
Agent LAG Type.
static(1) - This LAG is staticly maintained. dynamic(2) - This LAG is dynamicly maintained. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.2.2.1.10 |
||||||||||||||
|
Agent LAG Static Capability
enable(1) - Static capability is enabled for this LAG interface disable(2) - Static capability is disabled for this LAG interface |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.2.2.1.11 |
||||||||||||||
|
LAG Hashing Option.
Valid values correspond to 1 (=Source MAC, VLAN, EtherType, and incoming port associated with the packet) 2 (=Destination MAC, VLAN, EtherType, and incoming port … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.2.2.1.12 |
||||||||||||||
|
Agent LAG Threshold.
This configures the threshold(i.e minimum number of active ports) value for trunk port . |
Integer32r/w Constraints: range: 1-8 |
.1.3.6.1.4.1.248.12.1.2.2.2.1.13 |
||||||||||||||
|
This object identifies the largest value that can be
configured for hm2AgentLagSummaryMaxFrameSize. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.2.2.1.248 |
||||||||||||||
|
This object identifies the currently configured maximum frame size
value for this port. The maximum value that this object can be set to is the value of hm2AgentLagSummaryMaxFrameSizeLimit. For Ethernet ports which sup… |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.2.2.1.249 |
.1.3.6.1.4.1.248.12.1.2.2.3
·
1 row entry
·
4 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentLagDetailedConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentLagDetailedConfigTable'
A detailed table of the switch's LAG config entries
Switch's LAG config entry
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
LAG index
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.248.12.1.2.2.3.1.1 |
||||
|
LAG port index
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.248.12.1.2.2.3.1.2 |
||||
|
LAG port speed. See agentPortType for a description and list
of valid values. |
ObjectIdentifier | .1.3.6.1.4.1.248.12.1.2.2.3.1.3 |
||||
|
LAG port status.
active(1) - Actively participating in the LAG. inactive(2) - Not participating in the LAG. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.2.3.1.4 |
.1.3.6.1.4.1.248.12.1.2.8.4
·
1 row entry
·
1 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchAddressAgingTimeoutTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchAddressAgingTimeoutTable'
The switch's address aging timeout table
Aging information about a specific Filtering Database.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
The FDB entry's address aging timeout (in seconds)
|
Integer32r/w Constraints: range: 10-500000 |
.1.3.6.1.4.1.248.12.1.2.8.4.1.1 |
.1.3.6.1.4.1.248.12.1.2.8.5
·
1 row entry
·
5 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchStaticMacFilteringTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchStaticMacFilteringTable'
The switch's static Mac filtering table
Per port ingress/egress filter configuration based on VLAN Id and MAC address.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The Static MAC Filter Vlan Id
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.5.1.1 |
||||||||||||
|
The Static MAC Filter MAC address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.5.1.2 |
||||||||||||
|
The Static MAC Filter source port mask.
When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between this … |
Hm2AgentPortMaskr/w | .1.3.6.1.4.1.248.12.1.2.8.5.1.3 |
||||||||||||
|
The Static MAC Filter destination port mask.
When setting this value, the system will ignore configuration for ports not between the first and last valid ports. Configuration of any port numbers between … |
Hm2AgentPortMaskr/w | .1.3.6.1.4.1.248.12.1.2.8.5.1.4 |
||||||||||||
|
The Static MAC Filter status.
Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.8.5.1.5 |
.1.3.6.1.4.1.248.12.1.2.8.6.1
·
1 row entry
·
4 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchSnoopingCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchSnoopingCfgTable'
A table of the IGMP/MLD Snooping Global configuration entries.
Represents entry for Snooping switch Configuration.
Indexes
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The protocol type of network protocol in use.
|
INET-ADDRESS-MIBInetAddressType Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.6.1.1.1 |
||||||||||||||
|
This enables or disables Snooping on the system.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.6.1.1.2 |
||||||||||||||
|
IGMP/MLD Snooping Port Mask.
This allows configuration of IGMP/MLD Snooping on selected ports. IGMP/MLD Snooping cannot be enabled on an interface that has routing enabled, or is a member of a LAG. If a … |
Hm2AgentPortMaskr/w | .1.3.6.1.4.1.248.12.1.2.8.6.1.1.3 |
||||||||||||||
|
Multicast Control Frames Processed by CPU.
The number of multicast control frames that have been processed by the CPU. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.6.1.1.4 |
.1.3.6.1.4.1.248.12.1.2.8.7.1
·
1 row entry
·
8 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchSnoopingIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchSnoopingIntfTable'
A table of the IGMP/MLD Snooping Interface configuration entries.
Represents entry for a IGMP/MLD Snooping Interface.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The port number to be selected. Each port maps to an interface.
|
Unsigned32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.248.12.1.2.8.7.1.1.1 |
||||
|
This enables or disables IGMP/MLD Snooping on a selected interface.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.7.1.1.2 |
||||
|
The amount of time in seconds that a switch will wait for a report
from a particular group on the selected interface before deleting the interface from the entry. This value must be greater than hm2AgentSwitchSnoopingIn… |
Integer32r/w Constraints: range: 2-3600 |
.1.3.6.1.4.1.248.12.1.2.8.7.1.1.3 |
||||
|
The amount of time in seconds a switch will wait after sending
a query on the selected interface because it did not receive a report for a particular group in that interface. This value must be less than hm2AgentSwitch… |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.7.1.1.4 |
||||
|
The amount of time in seconds that a switch will wait for a query to be
received on the selected interface before the interface is removed from the list of interfaces with multicast routers attached. A value of 0 repres… |
Integer32r/w Constraints: range: 0-3600 |
.1.3.6.1.4.1.248.12.1.2.8.7.1.1.5 |
||||
|
This enables or disables IGMP/MLD Snooping on the selected interface.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.7.1.1.6 |
||||
|
The port explicitly configured by management to be IGMP query port for all VLANs.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.7.1.1.7 |
||||
|
This field lists all the VlanIDs which include the selected interface.
|
VlanList | .1.3.6.1.4.1.248.12.1.2.8.7.1.1.8 |
.1.3.6.1.4.1.248.12.1.2.8.8.1
·
1 row entry
·
6 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchSnoopingVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchSnoopingVlanTable'
A table of the IGMP/MLD Snooping Vlan configuration entries.
Represents entry for a IGMP/MLD Snooping Vlan.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This enables or disables IGMP/MLD Snooping on a selected Vlan interface.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.8.1.1.1 |
||||
|
The amount of time in seconds that a switch will wait for a report
from a particular group on the selected vlan before deleting the interface participating in the vlan from the entry. This value must be greater than hm2… |
Integer32r/w Constraints: range: 2-3600 |
.1.3.6.1.4.1.248.12.1.2.8.8.1.1.2 |
||||
|
The amount of time in seconds a switch will wait after sending
a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This value must be less … |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.8.1.1.3 |
||||
|
This enables or disables IGMP/MLD Snooping on the selected vlan.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.8.1.1.4 |
||||
|
The amount of time in seconds that a switch will wait for a query to be
received on the selected interface participating in the vlan before the interface is removed from the list of interfaces with multicast routers att… |
Integer32r/w Constraints: range: 0-3600 |
.1.3.6.1.4.1.248.12.1.2.8.8.1.1.5 |
||||
|
This enables or disables IGMP/MLD Snooping Report Suppression feature on the selected vlan.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.8.1.1.6 |
.1.3.6.1.4.1.248.12.1.2.8.9.1
·
1 row entry
·
1 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchVlanStaticMrouterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchVlanStaticMrouterTable'
A table of the IGMP/MLD Static Mrouter Configuration parameters.
Represents entry for a IGMP/MLD Static Mrouter.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This enables or disables IGMP/MLD mrouter on a per interface per VLAN basis.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.9.1.1.1 |
hm2AgentSwitchMFDBTable
table.1.3.6.1.4.1.248.12.1.2.8.10.1
·
1 row entry
·
7 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchMFDBTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchMFDBTable'
The Multicast Forwarding Database table
Contains Forwarding and Filtering information per Vlan Index, MAC Address, and
Component User.
Component User.
| Column | Syntax | OID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Vlan Index for which this entry is associated with.
|
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.10.1.1.1 |
||||||||||
|
A multicast MAC address for which the switch has forwarding and or
filtering information. |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.10.1.1.2 |
||||||||||
|
The component that is responsible for this entry in the Multicast
Forwarding Database. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.8.10.1.1.3 |
||||||||||
|
This displays the type of the entry.
static(1) - Entries configured by the end user dynamic(2) - Entries added as a result of a learning process or protocol |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.8.10.1.1.4 |
||||||||||
|
Text description of this multicast table entry.
|
SNMPv2-TCDisplayString Type Constraints: range: 0..255Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c… |
.1.3.6.1.4.1.248.12.1.2.8.10.1.1.5 |
||||||||||
|
BitMask indicating which ports this entry indicates should be forwarded.
To obtain port numbers from interface numbers, use the objects hm2AgentPortDot1dBasePort and hm2AgentPortIfIndex in the hm2AgentPor… |
Hm2AgentPortMask | .1.3.6.1.4.1.248.12.1.2.8.10.1.1.6 |
||||||||||
|
BitMask indicating which ports this entry indicates should be filtered.
To obtain port numbers from interface numbers, use the objects hm2AgentPortDot1dBasePort and hm2AgentPortIfIndex in the hm2AgentPort… |
Hm2AgentPortMask | .1.3.6.1.4.1.248.12.1.2.8.10.1.1.7 |
.1.3.6.1.4.1.248.12.1.2.8.10.2
·
1 row entry
·
3 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchMFDBSummaryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchMFDBSummaryTable'
The multicast forwarding database summary table.
Summarizes the forwarding ports for all components registered for all
MFDB table entries with the same Vlan Index and MAC Address.
MFDB table entries with the same Vlan Index and MAC Address.
| Column | Syntax | OID |
|---|---|---|
|
Vlan Index for which this entry is associated with.
|
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.10.2.1.1 |
|
A multicast MAC address for which the switch has forwarding and or
filtering information. |
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.10.2.1.2 |
|
Port Mask indicating which ports this entry indicates should be forwarded.
To obtain port numbers from interface numbers, use the objects hm2AgentPortDot1dBasePort and hm2AgentPortIfIndex in the hm2AgentP… |
Hm2AgentPortMask | .1.3.6.1.4.1.248.12.1.2.8.10.2.1.3 |
.1.3.6.1.4.1.248.12.1.2.8.17.1
·
1 row entry
·
3 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchVlanMacAssociationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchVlanMacAssociationTable'
The switch's MAC To VLAN association table
VLAN to be assigned to untagged or priority tagged
packets based on MAC address.
packets based on MAC address.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The Mac address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.17.1.1.1 |
||||||||||||
|
The VLAN the Mac address assigned to
|
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.17.1.1.2 |
||||||||||||
|
The Mac to VLAN association row status.
Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.8.17.1.1.3 |
.1.3.6.1.4.1.248.12.1.2.8.18.1
·
1 row entry
·
3 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchProtectedPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchProtectedPortTable'
The switch's protected port mapping table
Protected ports assigned to groups.
| Column | Syntax | OID |
|---|---|---|
|
The group that this port belongs to
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.18.1.1.1 |
|
The name of the group
|
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.248.12.1.2.8.18.1.1.2 |
|
The set of ports that are protected in this group
|
Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.248.12.1.2.8.18.1.1.3 |
.1.3.6.1.4.1.248.12.1.2.8.19.1
·
1 row entry
·
4 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchVlanSubnetAssociationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchVlanSubnetAssociationTable'
The switch's Subnet To VLAN association table
VLAN to be assigned to untagged or priority tagged
packets based on IP address and Subnet Mask.
packets based on IP address and Subnet Mask.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The ip address
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.248.12.1.2.8.19.1.1.1 |
||||||||||||
|
The subnet mask
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.248.12.1.2.8.19.1.1.2 |
||||||||||||
|
The VLAN that the IP address and subnet mask assigned to
|
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.19.1.1.3 |
||||||||||||
|
The Subnet to VLAN association row status.
Supported values: active(1) - valid entry createAndGo(4) - used to create a new entry destroy(6) - removes the entry |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.8.19.1.1.4 |
.1.3.6.1.4.1.248.12.1.2.8.20.1
·
1 row entry
·
4 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchSnoopingQuerierCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchSnoopingQuerierCfgTable'
A table of the IGMP/MLD Snooping Querier Global configuration entries.
Represents entry for Snooping Querier Configuration.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This enables or disables Snooping Querier on the system.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.20.1.1.1 |
||||
|
This specifies the multicast protocol versions that are
supported by the system. |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.20.1.1.2 |
||||
|
This specified the timer interval after which the system
generates general queries. |
Integer32r/w Constraints: range: 1-1800 |
.1.3.6.1.4.1.248.12.1.2.8.20.1.1.4 |
||||
|
This specified the timer interval after which the detected
other querier information is no longer valid. |
Integer32r/w Constraints: range: 60-300 |
.1.3.6.1.4.1.248.12.1.2.8.20.1.1.5 |
.1.3.6.1.4.1.248.12.1.2.8.20.2
·
1 row entry
·
8 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchSnoopingQuerierVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchSnoopingQuerierVlanTable'
A table of the Snooping Querier Vlan configuration entries.
Represents entry for a Snooping Querier configurable Vlan.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
This enables or disables Snooping Querier on a selected Vlan interface.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.20.2.1.1 |
||||||
|
This specifies the current state of the Snooping Querier on a selected vlan interface
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.8.20.2.1.2 |
||||||
|
This object is deprecated.
This enables or disables the Snooping Querier Election Participation mode. When enabled snooping querier switch will participate in querier election up on discovering another querier in the s… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.8.20.2.1.3 |
||||||
|
This specifies the default source ip address to be used while generating general queries on
the specified vlan. |
INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255 |
.1.3.6.1.4.1.248.12.1.2.8.20.2.1.4 |
||||||
|
This specifies the multicast protocol version that is currently being used by the snooping
switch for the specified vlan while generating query messages. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.20.2.1.5 |
||||||
|
The amount of time in seconds a switch will wait after sending
a query on the selected vlan because it did not receive a report for a particular group in the interface participating in the vlan. This object is valid onl… |
Integer32 Constraints: range: -1-2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.20.2.1.6 |
||||||
|
This specifies the last querier's ip address for the specified vlan.
It represents the detected other multicast querier in the vlan. |
INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255 |
.1.3.6.1.4.1.248.12.1.2.8.20.2.1.7 |
||||||
|
This specifies the multicast protocol version that is currently being used
by the detected other multicast querier for the specified vlan. (-1) - indicates that parameter is not available. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.20.2.1.8 |
.1.3.6.1.4.1.248.12.1.2.8.21.4
·
1 row entry
·
6 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDaiVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDaiVlanConfigTable'
A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
A row instance contains the configuration for Dynamic
ARP Inspection at each existing VLAN.
ARP Inspection at each existing VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This object indicates the VLAN number on which Dynamic ARP
Inspection feature is configured. |
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.21.4.1.1 |
||||
|
This object indicates whether Dynamic ARP Inspection is
enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this object is set to 'false', Dynamic A… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.21.4.1.2 |
||||
|
This object indicates whether the Dynamic ARP Inspection
logging is enabled on this VlAN. If this object is set to 'true', Dynamic ARP Inspection logging is enabled. If this object is set to 'false', Dynamic ARP Inspect… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.21.4.1.3 |
||||
|
This object indicates the ARP ACL name set for this VLAN. Notice
that the ACL is regarded only if the corresponding row in 'agentArpAclTable' is active. |
OctetStringr/w Constraints: range: 0-31 |
.1.3.6.1.4.1.248.12.1.2.8.21.4.1.4 |
||||
|
If an ARP ACL is defined for the VLAN and there is no match for
the received ARP packet, the further proceeding depends on this MIB object. If it is 'true', then the packet is dropped, otherwise the packet is checked ag… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.21.4.1.5 |
||||
|
If enabled, the ARP frame received on an untrusted port (in a DAI
enabled VLAN) is checked against the ARP ACL and the DHCP Snooping bindings database. If disabled it is only checked against the ARP ACL. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.21.4.1.248 |
.1.3.6.1.4.1.248.12.1.2.8.21.6
·
1 row entry
·
10 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDaiVlanStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDaiVlanStatsTable'
A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
A row instance contains the Dynamic ARP Inspection
statistics per VLAN.
statistics per VLAN.
Indexes
| Column | Syntax | OID |
|---|---|---|
|
This object indicates the VLAN number on which Dynamic ARP
Inspection statistics are retrieved. |
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.21.6.1.1 |
|
Number of valid ARP packets forwarded by DAI.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.21.6.1.2 |
|
Number of invalid ARP packets dropped by DAI.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.21.6.1.3 |
|
Number of ARP packets that were dropped by DAI as
there is no matching DHCP Snooping binding entry found. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.21.6.1.4 |
|
Number of ARP packets that were forwarded by DAI as
there is a matching DHCP Snooping binding entry found. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.21.6.1.5 |
|
Number of ARP packets that were dropped by DAI as
there is no matching ARP ACL rule found for this Vlan and the static flag is set on this vlan. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.21.6.1.6 |
|
Number of ARP packets that were permitted by DAI as
there is a matching ARP ACL rule found for this Vlan. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.21.6.1.7 |
|
Number of ARP packets that were dropped by DAI as the
sender mac address in ARP packet didn't match the source mac in ethernet header. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.21.6.1.8 |
|
Number of ARP packets that were dropped by DAI as the
target mac address in ARP reply packet didn't match the destination mac in ethernet header. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.21.6.1.9 |
|
Number of ARP packets that were dropped by DAI as the
sender IP address in ARP packet or target IP address in ARP reply packet is invalid. Invalid addresses include 0.0.0.0, 255.255.255.255, IP multicast addresses, clas… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.21.6.1.10 |
hm2AgentDaiIfConfigTable
table.1.3.6.1.4.1.248.12.1.2.8.21.7
·
1 row entry
·
4 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDaiIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDaiIfConfigTable'
A table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface capable of this feature.
A row instance contains the configuration for
Dynamic ARP Inspection at each physical
interface capable of this feature.
Dynamic ARP Inspection at each physical
interface capable of this feature.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This object indicates whether the interface is trusted for
Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.21.7.1.1 |
||||
|
This object indicates rate limit value for Dynamic ARP
Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object for consecutively burst interval seconds, ARP packets will be dropped. Valu… |
packets per secondInteger32r/w Constraints: range: -1-300 |
.1.3.6.1.4.1.248.12.1.2.8.21.7.1.2 |
||||
|
This object indicates the burst interval value
for rate limiting purpose on this interface. |
Unsigned32r/w Constraints: range: 1-15 |
.1.3.6.1.4.1.248.12.1.2.8.21.7.1.3 |
||||
|
This object indicates whether a port is auto-disabled when the
configured ARP threshold is exceeded. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.21.7.1.248 |
hm2AgentArpAclTable
table.1.3.6.1.4.1.248.12.1.2.8.22.1
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentArpAclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentArpAclTable'
A table of the ARP ACL entries
Represents entry for an ARP ACL
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Name of the ARP ACL, which must consist of 1 to 31 alphanumeric
characters and uniquely identify this ARP ACL. This object must be set to complete a new ARP ACL row instance. |
OctetStringr/w Constraints: range: 1-31 |
.1.3.6.1.4.1.248.12.1.2.8.22.1.1.1 |
||||||||||||
|
The status of this conceptual row. Entries can not be deleted until all rows in
arpAclRuleTable with corresponding values of arpAclIndex have been deleted. active(1) - This ACL instance is active. … |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.8.22.1.1.2 |
hm2AgentArpAclRuleTable
table.1.3.6.1.4.1.248.12.1.2.8.22.2
·
1 row entry
·
3 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentArpAclRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentArpAclRuleTable'
A table of the ARP ACL Rule entries
Represents entry for a set of ARP ACL-match rules
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Sender IP address match value for the ARP ACL.
This address must be a unicast address unequal to 0.0.0.0. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.248.12.1.2.8.22.2.1.1 |
||||||||||||
|
Sender MAC address match value for the ARP ACL.
This address must be a unicast address unequal to 00:0:00:00:00:00. |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.22.2.1.2 |
||||||||||||
|
The status of this conceptual row.
active(1) - This ACL Rule is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values. createAndGo(4) - Accept row val… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.8.22.2.1.3 |
.1.3.6.1.4.1.248.12.1.2.8.23.3
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDhcpSnoopingVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDhcpSnoopingVlanConfigTable'
A table provides the mechanism to control DHCP SNOOPING per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
A row instance contains the configuration for DHCP
SNOOPING at each existing VLAN.
SNOOPING at each existing VLAN.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This object indicates the VLAN number on which DHCP SNOOPING
Inspection feature is configured. |
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.23.3.1.1 |
||||
|
This object indicates whether DHCP SNOOPING is
enabled in this VLAN. If this object is set to 'true', DHCP SNOOPING is enabled. If this object is set to 'false', DHCP SNOOPING is disabled. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.23.3.1.2 |
.1.3.6.1.4.1.248.12.1.2.8.23.4
·
1 row entry
·
5 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDhcpSnoopingIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDhcpSnoopingIfConfigTable'
A table provides the mechanism to configure the trust state for DHCP snooping purpose at each physical interface capable of this feature.
A row instance contains the configuration for
DHCP snooping at each physical interface capable of this feature.
DHCP snooping at each physical interface capable of this feature.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This object indicates whether the interface is trusted for
DHCP snooping purpose. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.23.4.1.1 |
||||
|
This object indicates whether the Logging needs on DHCP snooping validations
or not |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.23.4.1.2 |
||||
|
This object indicates rate limit value for DHCP
Snooping purpose. If the incoming rate of DHCP packets exceeds the value of this object for consecutively burst interval seconds, DHCP packets will be dropped. Value of -1… |
packets per secondInteger32r/w Constraints: range: -1-150 |
.1.3.6.1.4.1.248.12.1.2.8.23.4.1.3 |
||||
|
This object indicates the burst interval value
for rate limiting purpose on this interface. |
Integer32r/w Constraints: range: 1-15 |
.1.3.6.1.4.1.248.12.1.2.8.23.4.1.4 |
||||
|
This object indicates whether a port is auto-disabled when the
configured threshold is reached. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.23.4.1.248 |
.1.3.6.1.4.1.248.12.1.2.8.23.5
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentIpsgIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentIpsgIfConfigTable'
A table provides the mechanism to configure the IPSG at each physical interface capable of this feature.
A row instance contains the configuration for
IPSG at each physical interface capable of this feature.
IPSG at each physical interface capable of this feature.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This object indicates whether IP packets received on this interface
are filtered based on whether IP Source Guard considers the source IP address to be a valid client address. Setting this variable to false automaticall… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.23.5.1.1 |
||||
|
This object indicates whether IP packets received on this interface
are filtered based on whether IP Source Guard considers the source MAC address to be a valid client address. The port security option cannot be enable… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.23.5.1.2 |
.1.3.6.1.4.1.248.12.1.2.8.23.7
·
1 row entry
·
3 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDhcpSnoopingStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDhcpSnoopingStatsTable'
A table provides the mechanism for statics of DHCP snooping.
A row instance contains the DHCP snooping statistics per VLAN.
| Column | Syntax | OID |
|---|---|---|
|
This object indicates the number of failure verifications of client mac address with
source mac address |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.23.7.1.1 |
|
This object indicates the number of invalid DHCP releases and deny messages
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.23.7.1.2 |
|
This object indicates the number of invalid DHCP server mesaages
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.23.7.1.3 |
.1.3.6.1.4.1.248.12.1.2.8.23.8
·
1 row entry
·
6 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentStaticIpsgBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentStaticIpsgBindingTable'
A table of the IPSG static entries
Represents a binding in IPSG table
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Interface on which this IPSG binding is going to be added.
|
IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.248.12.1.2.8.23.8.1.1 |
||||||||||||
|
VLAN to which this IPSG binding is going to be added.
|
Q-BRIDGE-MIBVlanIndexr/w | .1.3.6.1.4.1.248.12.1.2.8.23.8.1.2 |
||||||||||||
|
MAC address match value for the IPSG Binding.
This address must be a unicast address unequal to 00:0:00:00:00:00. |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.23.8.1.3 |
||||||||||||
|
IP address match value for the IPSG Binding.
This address must be a unicast address unequal to 0.0.0.0. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.248.12.1.2.8.23.8.1.4 |
||||||||||||
|
The status of this conceptual row.
active(1) - This DHCP Snooping binding is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values. createAndGo(4) - A… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.8.23.8.1.5 |
||||||||||||
|
Set to true when Binding is applied to the Hardware
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.23.8.1.248 |
.1.3.6.1.4.1.248.12.1.2.8.23.9
·
1 row entry
·
5 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDynamicIpsgBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDynamicIpsgBindingTable'
A table of the IPSG dynamic entries
Represents a binding in IPSG table
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Interface on which this IPSG binding is added.
|
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.248.12.1.2.8.23.9.1.1 |
||||
|
VLAN to which this IPSG binding is going to be added.
|
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.23.9.1.2 |
||||
|
MAC address match value for the IPSG Binding.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.23.9.1.3 |
||||
|
Sender IP address match value for the IPSG Binding.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.248.12.1.2.8.23.9.1.4 |
||||
|
Set to true when Binding is applied to the Hardware
|
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.23.9.1.248 |
.1.3.6.1.4.1.248.12.1.2.8.23.10
·
1 row entry
·
5 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentStaticDsBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentStaticDsBindingTable'
A table of the DHCP SNOOPING static entries
Represents a binding in DHCP SNOOPING table
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Interface on which this DHCP SNOOPING binding is going to be added.
|
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.248.12.1.2.8.23.10.1.1 |
||||||||||||
|
VLAN to which this DHCP SNOOPING binding is going to be added.
|
Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.248.12.1.2.8.23.10.1.2 |
||||||||||||
|
MAC address match value for the DHCP SNOOPING Binding.
This address must be a unicast address unequal to 00:0:00:00:00:00. |
SNMPv2-TCMacAddressr/w Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.23.10.1.3 |
||||||||||||
|
IP address match value for the DHCP SNOOPING Binding.
This address must be a unicast address unequal to 0.0.0.0. |
SNMPv2-SMIIpAddressr/w Type Constraints: range: 4 |
.1.3.6.1.4.1.248.12.1.2.8.23.10.1.4 |
||||||||||||
|
The status of this conceptual row.
active(1) - This DHCP Snooping binding is active. notInService(2) - Row has been suspended. notReady(3) - Row has incomplete values. createAndGo(4) - A… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.8.23.10.1.5 |
.1.3.6.1.4.1.248.12.1.2.8.23.11
·
1 row entry
·
5 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDynamicDsBindingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDynamicDsBindingTable'
A table of the DHCP SNOOPING Dynamic entries
Represents a binding in DHCP SNOOPING table
Indexes
| Column | Syntax | OID |
|---|---|---|
|
Interface on which this DHCP SNOOPING binding is going to be added.
|
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.248.12.1.2.8.23.11.1.1 |
|
VLAN to which this DHCP SNOOPING binding is going to be added.
|
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.23.11.1.2 |
|
MAC address match value for the DHCP SNOOPING Binding.
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.23.11.1.3 |
|
IP address match value for the DHCP SNOOPING Binding.
|
SNMPv2-SMIIpAddress Type Constraints: range: 4 |
.1.3.6.1.4.1.248.12.1.2.8.23.11.1.4 |
|
This specifies the period for which the DHCP SNOOPING Binding is valid.
|
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.23.11.1.5 |
.1.3.6.1.4.1.248.12.1.2.8.24.2
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDhcpL2RelayIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDhcpL2RelayIfConfigTable'
A table provides the mechanism to enable/disable and configure the trust state for DHCP L2Relay purpose at each physical interface capable of this feature.
A row instance contains the configuration for
DHCP L2 Relay at each physical interface capable of this feature.
DHCP L2 Relay at each physical interface capable of this feature.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
This object indicates whether the DHCP L2Relay is enabled
or not |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.24.2.1.1 |
||||
|
This object indicates whether the interface is trusted for
DHCP L2 Relay purpose. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.24.2.1.2 |
.1.3.6.1.4.1.248.12.1.2.8.24.3
·
1 row entry
·
5 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDhcpL2RelayVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDhcpL2RelayVlanConfigTable'
A table provides the mechanism to control DHCP L2 Relay per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.
A row instance contains the configuration for DHCP
L2 Relay at each existing VLAN.
L2 Relay at each existing VLAN.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
This object indicates the VLAN number on which DHCP L2 Relay
feature is configured. |
Q-BRIDGE-MIBVlanIndex | .1.3.6.1.4.1.248.12.1.2.8.24.3.1.1 |
||||||||
|
This object indicates whether DHCP L2 Relay is
enabled in this VLAN. If this object is set to 'true', DHCP L2 Relay is enabled. If this object is set to 'false', DHCP L2 Relay is disabled. |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.24.3.1.2 |
||||||||
|
This object indicates whether DHCP CircuitId is
enabled for L2 relaying in this VLAN. If this object is set to 'true', DHCP CircuitId is enabled. If this object is set to 'false', DHCP Circ… |
SNMPv2-TCTruthValuer/w Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.248.12.1.2.8.24.3.1.3 |
||||||||
|
When this object is set with a non-empty string, DHCP RemoteId is
enabled for L2 relaying in this VLAN. Notice that you can set this object only if hm2AgentDhcpL2RelayVlanRemoteIdType is 'other'. |
OctetStringr/w Constraints: range: 0-32 |
.1.3.6.1.4.1.248.12.1.2.8.24.3.1.4 |
||||||||
|
This option determines the content of the option 82 Remote ID.
ip(1) - inserts the IP address mac(2) - inserts the MAC adress client-id(3) - inserts the client identifier (sysName) other(4) - inserts th… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.8.24.3.1.248 |
.1.3.6.1.4.1.248.12.1.2.8.24.7
·
1 row entry
·
4 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDhcpL2RelayStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDhcpL2RelayStatsTable'
A table provides the mechanism for statics of DHCP L2 Relay.
A row instance contains the DHCP L2Relay statistics per interface.
| Column | Syntax | OID |
|---|---|---|
|
This object indicates the number of DHCP server messages received with Option-82 field
on the untrusted interface. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.24.7.1.1 |
|
This object indicates the number of DHCP client messages received with Option-82 field
on the untrusted interface. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.24.7.1.2 |
|
This object indicates the number of DHCP server messages received without Option-82 field
on the trusted interface. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.24.7.1.3 |
|
This object indicates the number of DHCP client messages received without Option-82 field
on the trusted interface. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.24.7.1.4 |
.1.3.6.1.4.1.248.12.1.2.8.25.2
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchVoiceVlanDeviceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchVoiceVlanDeviceTable'
A table of the Voice Vlan device entries.
Represents entry for a Voice Device on the interface.
| Column | Syntax | OID |
|---|---|---|
|
The interface number of this interface.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.248.12.1.2.8.25.2.1.1 |
|
The Voice Device Mac address
|
SNMPv2-TCMacAddress Type Constraints: range: 6Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M… |
.1.3.6.1.4.1.248.12.1.2.8.25.2.1.2 |
hm2AgentSdmTemplateTable
table.1.3.6.1.4.1.248.12.1.2.8.28.1
·
1 row entry
·
8 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSdmTemplateTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSdmTemplateTable'
Displays Switch Database Management Template Information.
Information about a SDM Template table entry.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The SDM Template type this instance is associated with.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.8.28.1.1.1 |
||||||||
|
The maximum number of entries in the IPv4 Address Resolution Protocol (ARP) cache for routing interfaces.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.28.1.1.2 |
||||||||
|
The maximum number of IPv4 unicast forwarding table entries.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.28.1.1.3 |
||||||||
|
The maximum number of IPv6 Neighbor Discovery Protocol (NDP) cache entries.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.28.1.1.4 |
||||||||
|
The maximum number of IPv6 unicast forwarding table entries.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.28.1.1.5 |
||||||||
|
The maximum number of Equal cost next hops that can be installed in the IPv4 and IPv6 unicast forwarding tables.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.28.1.1.6 |
||||||||
|
The maximum number of IPv4 multicast forwarding table entries.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.28.1.1.7 |
||||||||
|
The maximum number of IPv6 multicast forwarding table entries.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.8.28.1.1.8 |
hm2AgentPrivateVlanTable
table.1.3.6.1.4.1.248.12.1.2.8.31.1
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentPrivateVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentPrivateVlanTable'
A table of the Private VLAN configuration entries.
Represents entry for a Private VLAN.
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Enables vlan for Private Vlan and configures private vlan type.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.8.31.1.1.1 |
||||||||
|
This field lists all the VlanIDs which are associated with the selected vlan.
If the selected vlan type is not primary(1), a zero-length bitmask is returned. |
VlanListr/w | .1.3.6.1.4.1.248.12.1.2.8.31.1.1.2 |
.1.3.6.1.4.1.248.12.1.2.8.31.2
·
1 row entry
·
5 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentPrivateVlanIntfAssocTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentPrivateVlanIntfAssocTable'
A table of the Private VLAN Interface configuration entries.
Represents entry for a Private VLAN Interface.
| Column | Syntax | OID |
|---|---|---|
|
Configures the primary host vlan association with the interface.
This must be configured along with hm2AgentPrivateVlanIntfAssocHostSecondary before the association will be operational. NOTE: Both hm2Agen… |
Integer32r/w Constraints: range: 0-4093 |
.1.3.6.1.4.1.248.12.1.2.8.31.2.1.1 |
|
Configures the secondary host vlan association with the interface.
This must be configured along with hm2AgentPrivateVlanIntfAssocHostPrimary before the association will be operational. To remove host-association valu… |
Integer32r/w Constraints: range: 0-4093 |
.1.3.6.1.4.1.248.12.1.2.8.31.2.1.2 |
|
Configures the primary promiscuous vlan association with the interface.
This must be configured along with hm2AgentPrivateVlanIntfAssocPromiscuousSecondary before the association will be operational. |
Integer32r/w Constraints: range: 0-4093 |
.1.3.6.1.4.1.248.12.1.2.8.31.2.1.3 |
|
Configures the secondary promiscuous vlan association with the interface.
This must be configured along with hm2AgentPrivateVlanIntfAssocPromiscuousPrimary before the association will be operational. |
VlanListr/w | .1.3.6.1.4.1.248.12.1.2.8.31.2.1.4 |
|
Shows the operational private vlans associated with the interface.
|
VlanList | .1.3.6.1.4.1.248.12.1.2.8.31.2.1.5 |
.1.3.6.1.4.1.248.12.1.2.8.249.10
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchGmrpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchGmrpPortTable'
GMRP control and status information for a bridge port. Augments dot1dPortGmrpEntry in P-BRIDGE-MIB.
GMRP control and status information for a bridge port.
Augments dot1dPortGmrpEntry in P-BRIDGE-MIB.
Augments dot1dPortGmrpEntry in P-BRIDGE-MIB.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The total number of GMRP packets received,
in all VLANs, on this port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.249.10.1.1 |
|
The total number of GMRP packets transmitted,
in all VLANs, on this port. |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.249.10.1.2 |
.1.3.6.1.4.1.248.12.1.2.8.249.15
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchGvrpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchGvrpPortTable'
GVRP control and status information for a bridge port. Augments dot1qPortVlanEntry in Q-BRIDGE-MIB.
GVRP control and status information for a bridge port.
Augments dot1qPortVlanEntry in Q-BRIDGE-MIB.
Augments dot1qPortVlanEntry in Q-BRIDGE-MIB.
Indexes
No indexes recorded
| Column | Syntax | OID |
|---|---|---|
|
The total number of GVRP packets received on this port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.249.15.1.1 |
|
The total number of GVRP packets transmitted on this port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.8.249.15.1.2 |
.1.3.6.1.4.1.248.12.1.2.8.250.1
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentSwitchDVlanTagInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentSwitchDVlanTagInterfaceTable'
A table that holds the double vlan tagging status per interface.
A table entry specifying the double vlan tagging status per interface.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Interface ID on to which the double vlan tagging status is mapped
|
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.248.12.1.2.8.250.1.1.1 |
||||
|
Controls the Double Vlan Tag status on this interface.
When the value is enable(1), it becomes a core port. If at least one port has value enable(1), all other ports which have value disable(2) become … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.8.250.1.1.2 |
hm2AgentPortMirrorTable
table.1.3.6.1.4.1.248.12.1.2.10.4
·
1 row entry
·
11 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentPortMirrorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentPortMirrorTable'
This table includes entries for each Port Mirroring session.
Provides configuration of a Port Mirroring session specifying the
destination port, and the source Port Mask, providing a many-to-one
mapping.
destination port, and the source Port Mask, providing a many-to-one
mapping.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The Session number of this mirroring entry. The number of sessions is
fixed and platform dependant. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.10.4.1.1 |
||||
|
The port which traffic from the mirrored ports will be sent to.
|
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.248.12.1.2.10.4.1.2 |
||||
|
The ports from which traffic will be sent to the destination port.
The destination port can not be included in this list of ports. |
Hm2AgentPortMaskr/w | .1.3.6.1.4.1.248.12.1.2.10.4.1.3 |
||||
|
The status of this port mirroring session.
enable(1) - This session is active and all traffic from the source ports will be mirrored to the destination port. disable(2) - This session is not… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.10.4.1.4 |
||||
|
The vlan from which traffic will be sent to the destination port.
|
Unsigned32r/w Constraints: range: 0-4042 |
.1.3.6.1.4.1.248.12.1.2.10.4.1.5 |
||||
|
The remote vlan from which traffic will be sent to the destination port.
|
Unsigned32r/w Constraints: range: 2-4042range: 0-0 |
.1.3.6.1.4.1.248.12.1.2.10.4.1.6 |
||||
|
The VLAN that forwards the network traffic to the destination switch.
|
Unsigned32r/w Constraints: range: 2-4042range: 0-0 |
.1.3.6.1.4.1.248.12.1.2.10.4.1.7 |
||||
|
The port which traffic from the mirrored ports will be sent to in case of destination being remote VLAN.
|
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.248.12.1.2.10.4.1.8 |
||||
|
The status of the management access possibility for this session.
enable(1) - Management is allowed - The device is accessible via this port and is responsive to protocols while mirroring the pr… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.10.4.1.9 |
||||
|
Removes, reset(2) the configuration for this session.
Returns always other(1) when read. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.10.4.1.248 |
||||
|
The secondary port which traffic from the mirrored
ports will be sent to. |
IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits… |
.1.3.6.1.4.1.248.12.1.2.10.4.1.249 |
.1.3.6.1.4.1.248.12.1.2.10.5
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentPortMirrorTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentPortMirrorTypeTable'
This table includes entries for each source ports direction of port mirroring.
Provides configuration of a Port Mirroring direction specifying the
session of the port mirroring and source port.
session of the port mirroring and source port.
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
The port from which traffic will be sent to the destination port.
This port should be a source port in the corresponding session. |
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.10.5.1.1 |
||||||||
|
The direction of the data to be mirrored on this source port.
none(0) - No configuration is set. tx(1) - The data that is transmitted from the source port. rx(2) - The data that is received on the source port. txrx(3) … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.10.5.1.2 |
.1.3.6.1.4.1.248.12.1.2.12
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentDot3adAggPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentDot3adAggPortTable'
This table provides 802.3ad link aggregation information for each physical port that is not available through the standard MIB.
Information about a table entry. The hm2AgentDot3adAggPort identifies
the external interface number of the port.
the external interface number of the port.
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
ifIndex of this physical port
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.248.12.1.2.12.1.1 |
||||
|
Enable/disable 802.3ad LACP on this port
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.12.1.2 |
hm2AgentPortConfigTable
table.1.3.6.1.4.1.248.12.1.2.13
·
1 row entry
·
27 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentPortConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentPortConfigTable'
A table of the switch's physical port config entries
Switch's physical port config entry
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The number of this port.
|
Integer32 Constraints: range: 1-65535 |
.1.3.6.1.4.1.248.12.1.2.13.1.1 |
||||||||||||
|
The switchs Port IfIndex.
|
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.13.1.2 |
||||||||||||
|
Clear stats for this port only.
|
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.10 |
||||||||||||
|
Config flowcontrol allows you to enable or disable
802.3x flow control for this port. This value applies to only full-duplex mode ports. Enabling symmetric flow control allows the port to send and receive pause frames. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.14 |
||||||||||||
|
This object identifies the largest value that can be
configured for hm2AgentPortMaxFrameSize. |
SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.13.1.18 |
||||||||||||
|
This object identifies the currently configured maximum frame size
value for this port. The maximum value that this object can be set to is the value of hm2AgentPortMaxFrameSizeLimit. For Ethernet ports which support 8… |
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.13.1.19 |
||||||||||||
|
If enabled, broadcast storm recovery will function on this port.
When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.20 |
||||||||||||
|
Configures the broadcast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate. |
Integer32r/w Constraints: range: 0-14880000 |
.1.3.6.1.4.1.248.12.1.2.13.1.21 |
||||||||||||
|
If enabled, multicast storm recovery will function on this port.
When you specify Enable for Multicast Storm Recovery and the multicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks (… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.22 |
||||||||||||
|
Configures the multicast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate. |
Integer32r/w Constraints: range: 0-14880000 |
.1.3.6.1.4.1.248.12.1.2.13.1.23 |
||||||||||||
|
If enabled, unicast storm recovery will function on this port.
When you specify Enable for Unicast Storm Recovery and the unknown unicast traffic on this Ethernet port exceeds the configured threshold, the switch blocks… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.24 |
||||||||||||
|
Configures the unicast storm recovery threshold for this port
as a percentage of port speed or as an absolute pps rate. |
Integer32r/w Constraints: range: 0-14880000 |
.1.3.6.1.4.1.248.12.1.2.13.1.25 |
||||||||||||
|
Configures the units of the threshold value to percentage of
port speed or absolute packets per second. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.26 |
||||||||||||
|
Configures the units of the threshold value to percentage of
port speed or absolute packets per second. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.27 |
||||||||||||
|
Configures the units of the threshold value to percentage of
port speed or absolute packets per second. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.28 |
||||||||||||
|
Describes and Configures the Port Voice VLAN Mode. This object
can only be set to disable(5). |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.29 |
||||||||||||
|
Describes and Configures the Port Voice VLAN ID
if the Voice Vlan Mode is Vlan ID. 0 can not be set. |
Integer32r/w Constraints: range: 0-4042 |
.1.3.6.1.4.1.248.12.1.2.13.1.30 |
||||||||||||
|
Describes and Configures the Port Voice VLAN Priority
if the Voice Vlan Mode is dot1p. A value of 255 indicates that the priority is not configured. |
Integer32r/w Constraints: range: 255-255range: 0-7 |
.1.3.6.1.4.1.248.12.1.2.13.1.31 |
||||||||||||
|
Describes and Configures the Port Voice VLAN Data Priority Mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.32 |
||||||||||||
|
Describes the Port Voice VLAN Operational Status.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.33 |
||||||||||||
|
Describes and Configures the Port Voice VLAN tagging mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.34 |
||||||||||||
|
Describes and Configures the Port Voice VLAN None mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.35 |
||||||||||||
|
Describes and Configures the Port Voice VLAN DSCP value.
|
SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.248.12.1.2.13.1.36 |
||||||||||||
|
Describes and Configures the Port Voice VLAN Authentication mode.
Disable means authentication not required for voice devices when dot1x is enabled. |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.37 |
||||||||||||
|
This object identifies operational status of the flow control per port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.38 |
||||||||||||
|
Different types of Switchport modes.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.45 |
||||||||||||
|
If enabled, this object helps in the detecting the loss of a SFP link by
deactivating its light. |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.13.1.248 |
.1.3.6.1.4.1.248.12.1.2.14.2
·
1 row entry
·
4 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentProtocolGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentProtocolGroupTable'
A table of the switch's Protocol-based VLAN entries
Switch's Protocol-based VLAN entry
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Group identifier of the Protocol-based VLAN entry.
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.248.12.1.2.14.2.1.1 |
||||||||||||
|
Group name of the Protocol-based VLAN entry.
|
OctetStringr/w Constraints: range: 0-16 |
.1.3.6.1.4.1.248.12.1.2.14.2.1.2 |
||||||||||||
|
VLAN associated with the Protocol-based VLAN entry. Set to 0 to remove.
|
Integer32r/w Constraints: range: 0-4093 |
.1.3.6.1.4.1.248.12.1.2.14.2.1.3 |
||||||||||||
|
The status of the Protocol-based VLAN entry.
active(1) - this entry is active createAndGo(4) - used to create a new entry destroy(6) - remove this entry |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.14.2.1.7 |
.1.3.6.1.4.1.248.12.1.2.14.3
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentProtocolGroupPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentProtocolGroupPortTable'
A table of the switch's physical port config entries
Switch's physical port config entry
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The interface number of this instance.
|
Integer32 Constraints: range: 0-2147483647 |
.1.3.6.1.4.1.248.12.1.2.14.3.1.1 |
||||||||||||
|
The status of this entry.
active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove th… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.14.3.1.2 |
.1.3.6.1.4.1.248.12.1.2.14.4
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentProtocolGroupProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentProtocolGroupProtocolTable'
A table of the switch's physical port config entries
Switch's physical port config entry
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The protocol ID of this instance. The value for IP is 2048 (0x0800), ARP is 2054 (0x0806) and IPX is 33079 (0x8137).
Other protocol Ids in the range 1536 to 65535 can also be configured. |
Integer32 Constraints: range: 1536-65535 |
.1.3.6.1.4.1.248.12.1.2.14.4.1.1 |
||||||||||||
|
The status of this entry.
active(1) - the port is associated with this group createAndGo(4) - add the port to this group createAndWait(5) - add the port to this group destroy(6) - remove th… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.14.4.1.2 |
hm2AgentStpPortTable
table.1.3.6.1.4.1.248.12.1.2.15.7
·
1 row entry
·
9 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentStpPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentStpPortTable'
STP port table.
STP port entry.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
The administrative STP state for the port.
enable(1) - enables STP on the port. disable(2) - disables STP on the port. The default port STP state is enabled for the first 4095 ports and di… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.7.1.1 |
||||
|
The MSTP BPDUs received on a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.7.1.2 |
||||
|
The MSTP BPDUs sent from a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.7.1.3 |
||||
|
The RSTP BPDUs received on a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.7.1.4 |
||||
|
The RSTP BPDUs sent from a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.7.1.5 |
||||
|
The STP BPDUs received on a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.7.1.6 |
||||
|
The STP BPDUs sent from a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.7.1.7 |
||||
|
Time since port was reset.
It is displayed in days, hours, minutes, and seconds. |
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.7.1.8 |
||||
|
Force the specified port to transmit RSTP or MSTP BPDUs.
Supported values: false(0) - BPDUs are not to be transmitted. true(1) - BPDUs are to be transmitted A non-zero value indicates that… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.7.1.9 |
hm2AgentStpCstPortTable
table.1.3.6.1.4.1.248.12.1.2.15.9
·
1 row entry
·
20 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentStpCstPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentStpCstPortTable'
CIST port table.
CIST port entry.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The MSTP operational status of a specific port for the CIST.
|
HM2-TC-MIBHmEnabledStatus Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.1 |
||||||||||||
|
The MSTP operational point to point mac of a specific port for the CIST.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.2 |
||||||||||||
|
The MSTP topology change acknowledge for a specific port in the CIST.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.3 |
||||||||||||
|
The administrative state of a specific port in CIST.
enable(1) - enables the port. disable(2) - disables the port. The default port state is disabled. |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.4 |
||||||||||||
|
The MSTP forwarding state of a specific port in CIST.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.5 |
||||||||||||
|
The MSTP port identifier of a specific port in CIST.
|
OctetString Constraints: range: 2-2 |
.1.3.6.1.4.1.248.12.1.2.15.9.1.6 |
||||||||||||
|
The MSTP port path cost in CIST. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed. |
Unsigned32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.248.12.1.2.15.9.1.7 |
||||||||||||
|
The MSTP port priority in CIST. The priority is
in the increments of 16. The default value is 128. |
Unsigned32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.248.12.1.2.15.9.1.8 |
||||||||||||
|
The MSTP designated bridge ID of a specific port in CIST.
|
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.248.12.1.2.15.9.1.9 |
||||||||||||
|
The MSTP designated cost of a specific port in CIST.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.9.1.10 |
||||||||||||
|
The MSTP designated port ID of a specific port in CIST.
|
OctetString Constraints: range: 2-2 |
.1.3.6.1.4.1.248.12.1.2.15.9.1.11 |
||||||||||||
|
The MSTP external port path cost in CIST. The default value varies depending upon the link speed.
|
Unsigned32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.248.12.1.2.15.9.1.12 |
||||||||||||
|
BPDU Guard Mode effect on the port.
enable(1) - BPDU Guard Mode is enabled on the port. disable(2) - BPDU Guard Mode is disabled on the port. |
HM2-TC-MIBHmEnabledStatus Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.13 |
||||||||||||
|
This command sets BPDU Filter mode on the port.
enable(1) - BPDU Filter Mode is enabled on the port. disable(2) - BPDU Filter Mode is disabled on the port. |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.14 |
||||||||||||
|
This command sets BPDU Flood mode on the port.
enable(1) - BPDU Flood Mode is enabled on the port. disable(2) - BPDU Flood Mode is disabled on the port. |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.15 |
||||||||||||
|
This command sets the auto-edge mode of the port which enables it
to become an edge port if it does not see BPDUs for some duration. enable(1) - enables the auto-edge mode for the port. disable(2) - disa… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.16 |
||||||||||||
|
This command sets a port to discard any superior information
received by the port and thus protect against root of the device from changing.The port gets put into discarding state and does not forward any packets. … |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.17 |
||||||||||||
|
This command restricts the port from propagating any topology change
information received through that port. enable(1) - enables the TCN guard mode for the port. disable(2) - disables the TCN guard mode … |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.18 |
||||||||||||
|
This command enables loop guard on this port. This setting applies
to all Spanning Tree instances of which this port is a member. enable(1) - enables the loop guard mode for the port. disable(2) - disabl… |
HM2-TC-MIBHmEnabledStatusr/w Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.19 |
||||||||||||
|
This command displays the BPDU Filter state on the port.
enable(1) - BPDU Filter Mode is active on the port. disable(2) - BPDU Filter Mode is inactive on the port. |
HM2-TC-MIBHmEnabledStatus Type Values:
|
.1.3.6.1.4.1.248.12.1.2.15.9.1.248 |
hm2AgentStpMstTable
table.1.3.6.1.4.1.248.12.1.2.15.10
·
1 row entry
·
10 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentStpMstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentStpMstTable'
MST table.
MST entry.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The MSTP instance ID.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.10.1.1 |
||||||||||||
|
The MSTP bridge priority in a specific instance. The priority is
in the increments of 4096. The recommended default value is 32768. |
Unsigned32r/w Constraints: range: 0-61440 |
.1.3.6.1.4.1.248.12.1.2.15.10.1.2 |
||||||||||||
|
The MSTP bridge identifier in a specific instance.
|
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.248.12.1.2.15.10.1.3 |
||||||||||||
|
The MSTP designated root bridge identifier in a specific instance.
|
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.248.12.1.2.15.10.1.4 |
||||||||||||
|
The MSTP root path cost in a specific instance.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.10.1.5 |
||||||||||||
|
The MSTP root port ID in a specific instance.
|
OctetString Constraints: range: 2-2 |
.1.3.6.1.4.1.248.12.1.2.15.10.1.6 |
||||||||||||
|
The MSTP time since the last topology change in a specific instance.
|
SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.10.1.7 |
||||||||||||
|
The MSTP count of topology changes in a specific instance.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.10.1.8 |
||||||||||||
|
The MSTP topology change parameter in a specific instance.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.10.1.9 |
||||||||||||
|
The MSTP instance status.
Supported values: active(1) - valid instance. notReady(3) - row has incomplete values. createAndGo(4) - used to create a new instance. destroy(6) … |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.15.10.1.10 |
hm2AgentStpMstPortTable
table.1.3.6.1.4.1.248.12.1.2.15.11
·
1 row entry
·
17 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentStpMstPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentStpMstPortTable'
MST port table.
MST port entry.
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The MSTP forwarding state of a specific port in a specific instance.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.11.1.1 |
||||||||||||
|
The MSTP port identifier of a specific port in a specific instance.
|
OctetString Constraints: range: 2-2 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.2 |
||||||||||||
|
The MSTP port path cost in a specific instance. The default value will
correspond to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending upon link speed. |
Unsigned32r/w Constraints: range: 0-200000000 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.3 |
||||||||||||
|
The MSTP port priority in a specific instance. The priority is
in the increments of 16. The default value is 128. |
Unsigned32r/w Constraints: range: 0-240 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.4 |
||||||||||||
|
The MSTP designated bridge ID of a specific port in a specific instance.
|
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.5 |
||||||||||||
|
The MSTP designated cost of a specific port in a specific instance.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.6 |
||||||||||||
|
The MSTP designated port ID of a specific port in a specific instance.
|
OctetString Constraints: range: 2-2 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.7 |
||||||||||||
|
The loop inconsistent state of a specific port in a specific instance.
This value can only report as true(1) when loop guard is enabled on the port and the port has transitioned from blocking state in this MST instance. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.11.1.8 |
||||||||||||
|
The number of times this interface has transitioned into loop inconsistent state.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.9 |
||||||||||||
|
The number of times this interface has transitioned out of loop inconsistent state.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.10 |
||||||||||||
|
The current port pole for a specific port (i.e., root, alternate, designated or backup) in a specific instance.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.11.1.248 |
||||||||||||
|
The Spanning Tree auto port path cost. If the value is true, the port
path cost will be calculated depending on link speed corresponding to the recommendation specified in IEEE 802.1s Table 13-2 which varies depending… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.11.1.249 |
||||||||||||
|
The received bridge ID on a specific port in a specific instance.
|
OctetString Constraints: range: 8-8 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.250 |
||||||||||||
|
The received root path cost of a specific port in a specific instance.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.251 |
||||||||||||
|
The received port ID on a specific port in a specific instance.
|
OctetString Constraints: range: 2-2 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.252 |
||||||||||||
|
The Spanning Tree auto port path cost of a given instance. If the value
is true, the port path cost will be calculated depending on link speed corresponding to the recommendation specified in IEEE 802.1s Table 13-2 w… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.15.11.1.253 |
||||||||||||
|
The received regional (internal) root path cost of a specific port in a specific instance.
|
SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.15.11.1.254 |
hm2AgentStpMstVlanTable
table.1.3.6.1.4.1.248.12.1.2.15.12
·
1 row entry
·
1 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentStpMstVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentStpMstVlanTable'
MST VLAN table.
MST VLAN entry.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The association status of an MSTP instance and a VLAN.
Supported values: active(1) - valid association between an MSTP instance and a VLAN. notReady(3) - inconsistent values for the the associatio… |
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.15.12.1.1 |
.1.3.6.1.4.1.248.12.1.2.17.1
·
1 row entry
·
2 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentClassOfServicePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentClassOfServicePortTable'
A table that contains information about the 802.1p priority mapping to traffic class priority queue for every physical port.
A 802.1p priority mapped to a traffic class priority queue.
| Column | Syntax | OID |
|---|---|---|
|
The Priority value determined for the received frame.
This value is equivalent to the priority indicated in the tagged frame received, or one of the evaluated priorities, determined according to the media type. … |
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.248.12.1.2.17.1.1.1 |
|
Traffic class priority queue the received frame is mapped to.
|
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.248.12.1.2.17.1.1.2 |
.1.3.6.1.4.1.248.12.1.2.31
·
1 row entry
·
12 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentKeepalivePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentKeepalivePortTable'
Keepalive port table.
Keepalive port table.
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
The keepalive state for the port.
enable(1) - enables keepalive on the port. disable(2) - disables keepalive on the port. The default port keepalive state is disabled. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.31.1.1 |
||||||
|
Keepalive status for the port.
yes (1) - loop detected on the port. no (2) - no loop detected on the port. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.31.1.2 |
||||||
|
The loop count on a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.31.1.3 |
||||||
|
Action on detecting a loop on the port.
trap (10) - send a trap. auto-disable (11) - execute auto disable configured action. all (12) - all above mentioned actions. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.31.1.5 |
||||||
|
TimeStamp when last loop was detected on a port.
|
SNMPv2-TCDateAndTime Type Constraints: range: 8range: 11Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month … |
.1.3.6.1.4.1.248.12.1.2.31.1.7 |
||||||
|
Type of TPID to be used for loop protection or None if no vlan based loop protection is required.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.31.1.8 |
||||||
|
Vlan Id to be used for loop protection or None if no vlan based loop protection is required.
|
Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094 |
.1.3.6.1.4.1.248.12.1.2.31.1.9 |
||||||
|
The keepalive mode for the port.
active(1) - enables transmission of keepalive check frames. passive(2) - disables transmission of check frames, only reception is active. The default port … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.31.1.248 |
||||||
|
The amount of keepalive check frames sent on a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.31.1.249 |
||||||
|
The amount of keepalive check frames received on a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.31.1.250 |
||||||
|
The amount of keepalive check frames discarded on a specific port.
|
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.248.12.1.2.31.1.251 |
||||||
|
Clear keepalive statistics on a specific port. When read always returns 'other'.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.248.12.1.2.31.1.252 |
.1.3.6.1.4.1.248.12.1.2.248.1
·
1 row entry
·
3 columns
Uses the hirschmann variant from
Command help
/opt/observium/mibs/hirschmann.
Walk hm2AgentPortRedirectTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-SWITCHING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-SWITCHING-MIB::hm2AgentPortRedirectTable'
This table includes entries for each Redirect session.
Provides configuration of a Redirect session specifying the
destination port, and the source Port Mask, providing a many-to-one
mapping.
destination port, and the source Port Mask, providing a many-to-one
mapping.
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
The port which traffic from the redirected ports will be sent to.
|
IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must … |
.1.3.6.1.4.1.248.12.1.2.248.1.1.1 |
||||||||||||
|
The ports from which traffic will be redirected to the destination port.
The destination port can not be included in this list of ports. |
Q-BRIDGE-MIBPortListr/w | .1.3.6.1.4.1.248.12.1.2.248.1.1.2 |
||||||||||||
|
The status of this port mirroring session.
|
SNMPv2-TCRowStatusr/w Type Values:
Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of … |
.1.3.6.1.4.1.248.12.1.2.248.1.1.3 |