HM2-PLATFORM-DVMRP-MIB

        The Hirschmann Private Platform2 MIB for DVMRP.
Copyright (C) 2013. All Rights Reserved.
    
Source file
HM2-PLATFORM-DVMRP-MIB
Last revised
Identity
hm2AgentDvmrp
Base OID
1.3.6.1.4.1.248.12.4.249
Net-SNMP examples using the hirschmann MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HM2-PLATFORM-DVMRP-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HM2-PLATFORM-DVMRP-MIB::hm2AgentDvmrp'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-PLATFORM-DVMRP-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-PLATFORM-DVMRP-MIB::hm2AgentDvmrp'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (56)
.1.3.6.1.4.1.248.12.4.249
.1.3.6.1.4.1.248.12.4.249.0
.1.3.6.1.4.1.248.12.4.249.1
.1.3.6.1.4.1.248.12.4.249.1.1
.1.3.6.1.4.1.248.12.4.249.1.1.1
.1.3.6.1.4.1.248.12.4.249.1.1.1.1
.1.3.6.1.4.1.248.12.4.249.1.1.1.2
.1.3.6.1.4.1.248.12.4.249.1.1.1.3
.1.3.6.1.4.1.248.12.4.249.1.1.1.4
.1.3.6.1.4.1.248.12.4.249.1.1.2
.1.3.6.1.4.1.248.12.4.249.1.1.2.1
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.1
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.2
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.248
Integer32
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.3
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.4
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.5
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.6
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.7
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.8
.1.3.6.1.4.1.248.12.4.249.1.1.2.1.9
.1.3.6.1.4.1.248.12.4.249.1.1.3
.1.3.6.1.4.1.248.12.4.249.1.1.3.1
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.1
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.10
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.11
Enumeration
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.12
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.2
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.3
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.4
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.5
Integer32
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.6
Integer32
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.7
Bits
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.8
.1.3.6.1.4.1.248.12.4.249.1.1.3.1.9
.1.3.6.1.4.1.248.12.4.249.1.1.4
.1.3.6.1.4.1.248.12.4.249.1.1.4.1
.1.3.6.1.4.1.248.12.4.249.1.1.4.1.1
.1.3.6.1.4.1.248.12.4.249.1.1.4.1.2
.1.3.6.1.4.1.248.12.4.249.1.1.4.1.3
.1.3.6.1.4.1.248.12.4.249.1.1.4.1.4
Integer32
.1.3.6.1.4.1.248.12.4.249.1.1.4.1.5
.1.3.6.1.4.1.248.12.4.249.1.1.4.1.6
.1.3.6.1.4.1.248.12.4.249.1.1.4.1.7
.1.3.6.1.4.1.248.12.4.249.1.1.5
.1.3.6.1.4.1.248.12.4.249.1.1.5.1
.1.3.6.1.4.1.248.12.4.249.1.1.5.1.1
.1.3.6.1.4.1.248.12.4.249.1.1.5.1.2
.1.3.6.1.4.1.248.12.4.249.1.1.5.1.3
Enumeration
.1.3.6.1.4.1.248.12.4.249.1.1.5.1.4
.1.3.6.1.4.1.248.12.4.249.1.1.6
.1.3.6.1.4.1.248.12.4.249.1.1.6.1
.1.3.6.1.4.1.248.12.4.249.1.1.6.1.1
.1.3.6.1.4.1.248.12.4.249.1.1.6.1.2
.1.3.6.1.4.1.248.12.4.249.1.1.6.1.3
.1.3.6.1.4.1.248.12.4.249.1.1.6.1.4
Dependencies (14) 5 direct · 9 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.248.12.4.249.0.1
A hm2AgentDvmrpNeighborLoss trap signifies the loss of a 2-way
adjacency with a neighbor. This trap should be generated
when the neighbor state changes from active to one-way,
ignoring, or down. The trap should be generated only if the
router has no other neighbors on the same interface with a
lower IP address than itself.
.1.3.6.1.4.1.248.12.4.249.0.2
A hm2AgentDvmrpNeighborNotPruning trap signifies that a non-pruning
neighbor has been detected (in an implementation-dependent
manner). This trap should be generated at most once per
generation ID of the neighbor. For example, it should be
generated at the time a neighbor is first heard from if the
prune bit is not set in its capabilities. It should also be
generated if the local system has the ability to tell that a
neighbor which sets the the prune bit in its capabilities is
not pruning any branches over an extended period of time.
The trap should be generated only if the router has no other
neighbors on the same interface with a lower IP address than
itself.