HM2-LOGGING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

hm2LogSyslogServerTable

table

.1.3.6.1.4.1.248.11.23.1.5.10 · 1 row entry · 8 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2LogSyslogServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-LOGGING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-LOGGING-MIB::hm2LogSyslogServerTable'

A list of syslog servers

hm2LogSyslogServerEntry row .1.3.6.1.4.1.248.11.23.1.5.10.1

An entry of syslog servers

Indexes

hm2LogSyslogServerIndex DNOS-DOT1X-ADVANCED-FEATURES-MIBagentDot1xAuthHistoryResultIfaceIndex DNOS-DOT1X-ADVANCED-FEATURES-MIBagentDot1xAuthHistoryResultIndex

Column Syntax OID

hm2LogSyslogServerIndex

An index that uniquely identifies the entry
in the table and so the syslog server.

Integer32

Constraints:
range: 1-65535
range: 1-8

.1.3.6.1.4.1.248.11.23.1.5.10.1.1

hm2LogSyslogServerIPAddrType

Address type for server IP address.
Currently, only ipv4(1), ipv6(2) and dns(16) are supported.

INET-ADDRESS-MIBInetAddressTyper/w

Constraints:
range: 1-65535

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.23.1.5.10.1.2

hm2LogSyslogServerIPAddr

IP address of syslog server for logging.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.23.1.5.10.1.3

hm2LogSyslogServerUdpPort

TCP or UDP port used for syslog server transmission. If this value is
zero then the default port 514 is used.

INET-ADDRESS-MIBInetPortNumberr/w

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.248.11.23.1.5.10.1.4

hm2LogSyslogServerLevelUpto

Up to log level to be sent to this syslog server.

HmAgentLogSeverityr/w

Type Values:

0	emergency
1	alert
2	critical
3	error
4	warning
5	notice
6	informational
7	debug

.1.3.6.1.4.1.248.11.23.1.5.10.1.5

hm2LogSyslogServerLogType

Defines the type of log messages to be sent to the syslog server.
systemlog (1): Define the system event log entries as stored also in
the system event log.
audittrail (2): Define the audit trail log entries.

Enumerationr/w

Enumerated Values:

1	systemlog
2	audittrail

.1.3.6.1.4.1.248.11.23.1.5.10.1.6

hm2LogSyslogServerRowStatus

Syslog server entry status.
active(1) - This syslog server is active.
notInService(2) - Row has been suspended.
notReady(3) - Row has incomplete values.
createAndGo(4) - Accept row values and activate.
createAndWait(5…

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.248.11.23.1.5.10.1.7

hm2LogSyslogServerTransportType

The transport type used to deliver the log messages to the syslog server.
When set to udp(1) the syslog messages are sent over UDP on the configured port.
When set to tls(2) the syslog messages are sent over TLS
on co…

Enumerationr/w

Enumerated Values:

1	udp
2	tls

.1.3.6.1.4.1.248.11.23.1.5.10.1.8

hm2LogPersistentFileTable

table

.1.3.6.1.4.1.248.11.23.1.6.5 · 1 row entry · 3 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2LogPersistentFileTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-LOGGING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-LOGGING-MIB::hm2LogPersistentFileTable'

A list of persistent log files

hm2LogPersistentFileEntry row .1.3.6.1.4.1.248.11.23.1.6.5.1

An entry of persistent log files

Indexes

hm2LogPersistentFileIndex

Column	Syntax	OID
hm2LogPersistentFileIndex The index of the table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.23.1.6.5.1.1`
hm2LogPersistentFileName The name of the log file.	SNMPv2-TCDisplayString Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.248.11.23.1.6.5.1.2`
hm2LogPersistentFileSize The size of the file in bytes.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.23.1.6.5.1.3`

hm2LogCounterFlashTable

table

.1.3.6.1.4.1.248.11.23.1.7.10 · 1 row entry · 4 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2LogCounterFlashTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-LOGGING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-LOGGING-MIB::hm2LogCounterFlashTable'

A list of log counter entries

hm2LogCounterFlashEntry row .1.3.6.1.4.1.248.11.23.1.7.10.1

An entry of log counter entries

Indexes

hm2LogCounterFlashBlock

Column Syntax OID

hm2LogCounterFlashBlock

The name of the flash region.

Enumeration

Enumerated Values:

1	bootBlock
2	fileSystem
3	imageStorage
4	parameters
5	formatFs
6	userFormatFs
7	dhcpBindings
8	persistentLog

.1.3.6.1.4.1.248.11.23.1.7.10.1.1

hm2LogCounterFlashDescription

The textual description of the group.

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.248.11.23.1.7.10.1.2

hm2LogCounterFlashCount

The number of flash sectors in this group.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.23.1.7.10.1.3

hm2LogCounterFlashValue

The number of sector erase operations performed for this group.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.248.11.23.1.7.10.1.4

hm2LogTempHistTable

table

.1.3.6.1.4.1.248.11.23.1.8.10 · 1 row entry · 4 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2LogTempHistTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-LOGGING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-LOGGING-MIB::hm2LogTempHistTable'

A list of temperature ranges and how many hours the
device has been in these ranges (histogram).

hm2LogTempHistEntry row .1.3.6.1.4.1.248.11.23.1.8.10.1

An entry of temperature ranges and how many hours the
device has been in these ranges (histogram).

Indexes

hm2LogTempHistIndex

Column	Syntax	OID
hm2LogTempHistIndex Index	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.23.1.8.10.1.1`
hm2LogTempHistRangeMin The lower bound of the range in 10th of centigrade (Celsius).	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.23.1.8.10.1.2`
hm2LogTempHistRangeMax The upper bound of the range in 10th of centigrade (Celsius).	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.23.1.8.10.1.3`
hm2LogTempHistTime The time spent in this range in minutes.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.248.11.23.1.8.10.1.4`

hm2LogEmailToAddressTable

table

.1.3.6.1.4.1.248.11.23.1.10.15 · 1 row entry · 4 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2LogEmailToAddressTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-LOGGING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-LOGGING-MIB::hm2LogEmailToAddressTable'

The table listing the destination email address and the message type.

hm2LogEmailToAddressEntry row .1.3.6.1.4.1.248.11.23.1.10.15.1

The table entry listing the destination email address and the message type.

Indexes

hm2LogEmailToAddrMessageIndex

Column Syntax OID

hm2LogEmailToAddrMessageIndex

An integer used only for indexing purposes.
Generally monotonically increasing from 1 as new
addresses are configured. Re-use of values for this
index should be avoided.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.248.11.23.1.10.15.1.1

hm2LogEmailToAddrMessageType

Log message type.

Enumerationr/w

Enumerated Values:

1	urgent
2	non-urgent

.1.3.6.1.4.1.248.11.23.1.10.15.1.2

hm2LogEmailToAddrAddress

Email address to which the email-alert to be sent.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.248.11.23.1.10.15.1.3

hm2LogEmailToAddrEntryStatus

Create, change or delete the entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.248.11.23.1.10.15.1.4

hm2LogEmailSubjectTable

table

.1.3.6.1.4.1.248.11.23.1.10.16 · 1 row entry · 3 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2LogEmailSubjectTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-LOGGING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-LOGGING-MIB::hm2LogEmailSubjectTable'

List of subject of the email for particular message type.

hm2LogEmailSubjectEntry row .1.3.6.1.4.1.248.11.23.1.10.16.1

This entry shows what kind of subject to be used for the given message

type.

Indexes

hm2LogEmailSubjectMessageType

Column Syntax OID

hm2LogEmailSubjectMessageType

Log message Type

Enumeration

Enumerated Values:

1	urgent
2	non-urgent

.1.3.6.1.4.1.248.11.23.1.10.16.1.1

hm2LogEmailSubject

Email subject for given message type.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.248.11.23.1.10.16.1.2

hm2LogEmailSubjectEntryStatus

Create, change or delete the entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.248.11.23.1.10.16.1.3

hm2LogEmailMailServerTable

table

.1.3.6.1.4.1.248.11.23.1.10.17 · 1 row entry · 10 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2LogEmailMailServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-LOGGING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-LOGGING-MIB::hm2LogEmailMailServerTable'

The (conceptual) table listing the mail servers.

hm2LogEmailMailServerEntry row .1.3.6.1.4.1.248.11.23.1.10.17.1

This entry shows the conmfiguration for the mail server(s).

Indexes

hm2LogEmailSmtpAddrIndex

Column Syntax OID

hm2LogEmailSmtpAddrIndex

An integer used only for indexing purposes.
Re-use of values for this index is allowed.

Integer32

Constraints:
range: 1-5

.1.3.6.1.4.1.248.11.23.1.10.17.1.1

hm2LogEmailSmtpAddrDescr

The description of the server configured.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.248.11.23.1.10.17.1.2

hm2LogEmailSmtpAddrType

Email SMTP address type.

INET-ADDRESS-MIBInetAddressTyper/w

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.248.11.23.1.10.17.1.3

hm2LogEmailSmtpAddr

SMTP server address.

INET-ADDRESS-MIBInetAddressr/w

Type Constraints:
range: 0..255

.1.3.6.1.4.1.248.11.23.1.10.17.1.4

hm2LogEmailSmtpPort

SMTP port number. When this object is set to 0, it resets to factory default port number 25.

INET-ADDRESS-MIBInetPortNumberr/w

Type Constraints:
range: 0..65535

.1.3.6.1.4.1.248.11.23.1.10.17.1.5

hm2LogEmailSmtpSecurity

This is the authentication mechanism that should be used.

Enumerationr/w

Enumerated Values:

1	none
2	tlsv1

.1.3.6.1.4.1.248.11.23.1.10.17.1.6

hm2LogEmailSmtpLoginID

This user id is used while the switch/router is being authenticated by the SMTP server,
if the hm2LogEmailSmtpSecurity is configured to 'tlsv1'.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.248.11.23.1.10.17.1.7

hm2LogEmailSmtpPassword

This password is used while the switch/router is being authenticated by the SMTP server,
if the hm2LogEmailSmtpSecurity is configured to 'tlsv1'.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.248.11.23.1.10.17.1.8

hm2LogEmailSmtpEntryStatus

Create, change or delete the entry.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.248.11.23.1.10.17.1.9

hm2LogEmailSmtpTimeout

Time out duration (in seconds) before packets are retransmitted.

Unsigned32r/w

Constraints:
range: 1-15

.1.3.6.1.4.1.248.11.23.1.10.17.1.10

hm2LogHumHistTable

table

.1.3.6.1.4.1.248.11.23.1.11.10 · 1 row entry · 4 columns

Open in standard view

Uses the hirschmann variant from /opt/observium/mibs/hirschmann.

Command help

Walk hm2LogHumHistTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-LOGGING-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-LOGGING-MIB::hm2LogHumHistTable'

A list of humidity ranges and how many hours the
device has been in these ranges (histogram).

hm2LogHumHistEntry row .1.3.6.1.4.1.248.11.23.1.11.10.1

An entry of humidity ranges and how many hours the
device has been in these ranges (histogram).

Indexes

hm2LogHumHistIndex

Column	Syntax	OID
hm2LogHumHistIndex Index	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.248.11.23.1.11.10.1.1`
hm2LogHumHistRangeMin The lower bound of the range as a percentage.	percentUnsigned32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.248.11.23.1.11.10.1.2`
hm2LogHumHistRangeMax The upper bound of the range as a percentage.	percentUnsigned32 Constraints: `range: 0-100`	`.1.3.6.1.4.1.248.11.23.1.11.10.1.3`
hm2LogHumHistTime The time spent in this range in minutes.	minutesSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.248.11.23.1.11.10.1.4`