HM2-IOMODULE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
19

hm2IOModConfigDigInputTable

table
.1.3.6.1.4.1.248.11.100.1.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2IOModConfigDigInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-IOMODULE-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-IOMODULE-MIB::hm2IOModConfigDigInputTable' 
IO module config table for inputs
hm2IOModConfigDigInputEntry row .1.3.6.1.4.1.248.11.100.1.1.2.1
IO module config entry for inputs
Indexes
Column Syntax OID
hm2IOModConfigDigInputModID
The module ID of an input.
Module ID 0 corresponds to the power supply module.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.11.100.1.1.2.1.1
hm2IOModConfigDigInputID
The ID of an input.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.11.100.1.1.2.1.2
hm2IOModConfigDigInputLogEvent
Trigger an event log when input status changes.
If the value is disable (2), no event log entry will be written.
If the value is enable (1), an event log entry will be written when
the input state changes.
The input sta…
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.100.1.1.2.1.3
hm2IOModConfigDigInputSnmpTrap
Trigger an SNMP trap log when input status changes.
If the value is disable (2), no SNMP trap will be sent.
If the value is enable (1), a SNMP trap will be sent when
the input state changes.
The SNMP trap will be sent t…
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.100.1.1.2.1.4

hm2IOModConfigDigOutputTable

table
.1.3.6.1.4.1.248.11.100.1.1.3 · 1 row entry · 9 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2IOModConfigDigOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-IOMODULE-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-IOMODULE-MIB::hm2IOModConfigDigOutputTable' 
IO module config table for outputs.
hm2IOModConfigDigOutputEntry row .1.3.6.1.4.1.248.11.100.1.1.3.1
IO module config entry for outputs
Indexes
Column Syntax OID
hm2IOModConfigDigOutputModID
The module ID of an output.
Module ID 0 corresponds to the power supply module.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.11.100.1.1.3.1.1
hm2IOModConfigDigOutputID
The ID of an output.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.11.100.1.1.3.1.2
hm2IOModConfigDigOutputLogEvent
Trigger an event log when output status changes.
If the value is disable (2), no event log entry will be written.
If the value is enable (1), an event log entry will be written when
the output state changes.
The output …
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.100.1.1.3.1.3
hm2IOModConfigDigOutputSnmpTrap
Trigger an SNMP trap log when output status changes.
If the value is disable (2), no SNMP trap will be sent.
If the value is enable (1), a SNMP trap will be sent when
the output state changes.
The SNMP trap will be sent…
HM2-TC-MIBHmEnabledStatusr/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.248.11.100.1.1.3.1.4
hm2IOModConfigDigOutputSourceAddressType
Address type of an input mirrored to the output.
Currently, only ipv4 is supported.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.248.11.100.1.1.3.1.5
hm2IOModConfigDigOutputSourceAddress
The IP address of an input mirrored to the output.
Use 0.0.0.0 if the output should not be set.
In this case hm2IOModValueDigOutputValue is not-configured(4).
Use 127.0.0.1 if a local input should be used.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.248.11.100.1.1.3.1.6
hm2IOModConfigDigOutputSourcePort
The SNMP port number being used by the input mirrored to the output.
This port would be the destination of the SNMP requests for
polling the state of the input.
INET-ADDRESS-MIBInetPortNumberr/w
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.248.11.100.1.1.3.1.7
hm2IOModConfigDigOutputSourceModID
The module ID of an input mirrored to the output.
Module ID 0 corresponds to the power supply module.
Ignored when hm2IOModConfigDigOutputSourceIP is 0.0.0.0.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.11.100.1.1.3.1.8
hm2IOModConfigDigOutputSourceID
The ID of an input mirrored to the output.
Ignored when hm2IOModConfigDigOutputSourceIP is 0.0.0.0.
Integer32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.11.100.1.1.3.1.9

hm2IOModValueDigInputTable

table
.1.3.6.1.4.1.248.11.100.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2IOModValueDigInputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-IOMODULE-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-IOMODULE-MIB::hm2IOModValueDigInputTable' 
IO module value table for inputs
hm2IOModValueDigInputEntry row .1.3.6.1.4.1.248.11.100.1.2.1.1
IO module value entry for inputs
Indexes
Column Syntax OID
hm2IOModValueDigInputModID
The module ID of an input.
Module ID 0 corresponds to the power supply module.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.11.100.1.2.1.1.1
hm2IOModValueDigInputID
The ID of an input.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.11.100.1.2.1.1.2
hm2IOModValueDigInputValue
Status of the input.
If the value is not-available(0), then the IO module is not plugged in,
if the value is high(1), the input has high (+24V) value,
if the value is low(2), the input has low (0V) value.
Enumeration
Enumerated Values:
0not-available
1high
2low
 .1.3.6.1.4.1.248.11.100.1.2.1.1.3

hm2IOModValueDigOutputTable

table
.1.3.6.1.4.1.248.11.100.1.2.2 · 1 row entry · 3 columns
Open in standard view
Uses the hirschmann variant from /opt/observium/mibs/hirschmann.
Command help
Walk hm2IOModValueDigOutputTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HM2-IOMODULE-MIB' -M '/opt/observium/mibs/hirschmann:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HM2-IOMODULE-MIB::hm2IOModValueDigOutputTable' 
IO module value table for outputs
hm2IOModValueDigOutputEntry row .1.3.6.1.4.1.248.11.100.1.2.2.1
IO module value entry for outputs
Indexes
Column Syntax OID
hm2IOModValueDigOutputModID
The module ID of an Output.
Module ID 0 corresponds to the power supply module.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.248.11.100.1.2.2.1.1
hm2IOModValueDigOutputID
The ID of an Output.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.248.11.100.1.2.2.1.2
hm2IOModValueDigOutputValue
Status of the output.
If the value is not-available(0), then the IO module is not plugged in,
if the value is high(1), the output has high (+24V) value,
if the value is low(2), the output has low (0V) value.
If the valu…
Enumeration
Enumerated Values:
0not-available
1high
2low
3invalid
4not-configured
 .1.3.6.1.4.1.248.11.100.1.2.2.1.3