HIPATH-WIRELESS-HWC-MIB Table View

Table of syslog servers to forward logging messages.

sysLogServersEntry row .1.3.6.1.4.1.4329.15.3.2.1.4.4.1

Configuration information for an external syslog server.

Indexes

sysLogServerIndex

Column	Syntax	OID
sysLogServerIndex Table index for the syslog server.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.4329.15.3.2.1.4.4.1.1
sysLogServerEnabled Indicates if messages are to be sent to the syslog server.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.2.1.4.4.1.2
sysLogServerIP syslog server IP address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.2.1.4.4.1.3
sysLogServerPort syslog server port number.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.2.1.4.4.1.4
sysLogServerRowStatus RowStatus for operating on syslogServersTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.2.1.4.4.1.5

Table containing a list of APs for which log collection is supported.

apLogSelectedAPsEntry row .1.3.6.1.4.1.4329.15.3.2.1.6.9.1

Configuration information of an AP which supports the AP log feature.

Indexes

apSerialNo

Column	Syntax	OID
apSerialNo Table index for the apLogSelectedAPs. The AP's serial number serves as the index.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.4329.15.3.2.1.6.9.1.1
select Indicates whether logs are collected from the AP.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.2.1.6.9.1.2

List of AP log file copy requests.

apLogFileCopyEntry row .1.3.6.1.4.1.4329.15.3.2.1.7.5.1

An entry describing the AP log file copy request.

Indexes

apLogFileCopyIndex

Column	Syntax	OID
apLogFileCopyIndex The index for this AP log file copy request.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.1
apLogFileCopyDestination Destination where the log file will be copied. If the local flash is not mounted, then you can not select 1. 1 : copy the local AP log file to flash. 2 : copy the local AP log file to remote server.	Enumerationr/w Enumerated Values: 1 flash 2 remoteServer	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.2
apLogFileCopyProtocol File transfer protocol to be used to copy the log file. 0 : ftp. 1 : scp.	Enumerationr/w Enumerated Values: 0 ftp 1 scp	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.3
apLogFileCopyServerIP The IP address of the remote server.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.4
apLogFileCopyUserID The user ID that is used for access to the remote server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.5
apLogFileCopyPassword The user password that is used for access to the remote server. This field can only be viewed in SNMPv3 mode with privacy.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.6
apLogFileCopyServerDirectory The directory on the remote server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.7
apLogFileCopyOperation If this field is set to 1, then the controller will start to perform the copy action.	Enumerationr/w Enumerated Values: 1 start	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.8
apLogFileCopyOperationStatus The operational state of the AP log file copy request. inactive - Indicates that the RowStatus of this conceptual row is not in the `active` state. pending - Indicates that the AP log file copy described by this row is…	Enumeration Enumerated Values: 1 inactive 2 pending 3 running 4 success 5 failure	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.9
apLogFileCopyRowStatus Row status variable for row operations on the apLogFileCopyTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.2.1.7.5.1.10

This table contains all layer two ports.

layerTwoPortEntry row .1.3.6.1.4.1.4329.15.3.2.4.6.1

Entry for a layer two port.

Indexes

IF-MIBifIndex

Column	Syntax	OID
layerTwoPortName Text string identifying the port within the controller.	SNMPv2-TCDisplayString Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.2.4.6.1.1
layerTwoPortMgmtState This value indicates administrator state of the port.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4329.15.3.2.4.6.1.2
layerTwoPortMacAddress Port's MAC address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4329.15.3.2.4.6.1.3

tunnelStatsTable contains a list of the IP tunnels connected 
to this EWC for use in inter-EWC mobility.

tunnelStatsEntry row .1.3.6.1.4.1.4329.15.3.2.7.7.1

Statistics for a mobility tunnel.

Indexes

tunnelStartIP tunnelEndIP

Column	Syntax	OID
tunnelStartIP IP address for the start of the tunnel.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.2.7.7.1.1
tunnelStartHWC Name of the access controller for the start of the tunnel.	OctetStringr/w	.1.3.6.1.4.1.4329.15.3.2.7.7.1.2
tunnelEndIP IP address for the end of the tunnel.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.2.7.7.1.3
tunnelEndHWC Name of the access controller for the end of the tunnel.	OctetStringr/w	.1.3.6.1.4.1.4329.15.3.2.7.7.1.4
tunnelStatus Indicates if the mobility tunnel is up or down.	Enumerationr/w Enumerated Values: 1 disconnected 2 connected	.1.3.6.1.4.1.4329.15.3.2.7.7.1.5
tunnelStatsTxBytes Number of bytes have been transmitted from the controller at the start of the tunnel to the controller on the other end of the tunnel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.2.7.7.1.6
tunnelStatsRxBytes Number of bytes have been received by the controller at the end of the tunnel from the controller at the start of the tunnel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.2.7.7.1.7
tunnelStatsTxRxBytes Sum of transmitted and received bytes over this tunnel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.2.7.7.1.8

This table lists each of the reply messages returned in RADIUS Access-Reject messages
and for each reply message, a count of the number of times it has been received.

accessRejectMsgEntry row .1.3.6.1.4.1.4329.15.3.2.7.9.1

One entry consisting of a unique Access-Reject Reply-Message (accessRejectReplyMessage) and
count of this message.

Indexes

armIndex

Column	Syntax	OID
armIndex A number uniquely identifying each conceptual row in the accessRejectMsgTable.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.4329.15.3.2.7.9.1.1
armCount Count of the number of times the controller has received an Access-Reject response from a RADIUS server that contained the associated armReplyMessage.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.2.7.9.1.2
armReplyMessage A reply message attribute received by the controller from a RADIUS server in an Access-Reject message.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.2.7.9.1.3

List of aggregated access points that are operating on a specific wireless
channels.

apByChannelEntry row .1.3.6.1.4.1.4329.15.3.2.10.3.1

An entry in this table for one wireless channel and aggregated access point
on that channel.

Indexes

apByChannelNumber

Column	Syntax	OID
apByChannelNumber The channel on which a set of access points are presently operating. If this number is 0, this means the AP is in Guardian mode or the AP's radios are turned off.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.2.10.3.1.1
apByChannelAPs Total number of the access point on the channel that this row is indexed on.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.2.10.3.1.2

Contains definitions of the Virtual Network Segments 
defined on this WirelessController.

vnsConfigEntry row .1.3.6.1.4.1.4329.15.3.3.1.2.1

Configuration elements for a specific Virtual Network Segment.

Indexes

vnsIfIndex

Column	Syntax	OID
vnsDescription Textual description of the VNS.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.2.1.1
vnsAssignmentModeobsolete Determines the method by which mobile units are assigned an address within this VNS. If vnsAssignmentMode = ssid, any client with an SSID matching the VNS will be assigned an address from this VNS. If vnsAssignment…	Enumerationr/w Enumerated Values: 1 ssid 2 aaa	.1.3.6.1.4.1.4329.15.3.3.1.2.1.2
vnsMUSessionTimeout Client session idle time out, in seconds.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.2.1.3
vnsAllowMulticast When true, allows IP multicast packets to be broadcast to the clients on this VNS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.2.1.4
vnsSSID Service Set Identifier (i.e. Network Name) that will be configured on the AccessPoints associated with this VNS.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.2.1.5
vnsDomain Domain name to be supplied to the wireless clients if internal DHCP address assignment.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.2.1.6
vnsDNSServers List of DNSs to be supplied to the wireless clients if internal DHCP address assignment.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.2.1.7
vnsWINSServers List of WINSs to be supplied to the wireless clients if internal DHCP address assignment.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.2.1.8
vnsAuthModel vnsAuthModel specifies the authentication method used for clients in the VNS. None indicates that the VNS is open, and no authentication is required. vnsAuthModel=captivePortal may only be specified for a VNS with vn…	Enumerationr/w Enumerated Values: 1 none 2 captivePortal 3 dot1X	.1.3.6.1.4.1.4329.15.3.3.1.2.1.9
vnsParentIfIndexobsolete Specifies the ifIndex of the parent VNS, if this VNS is a child. If this is a top level VNS, vnsParentIfIndex will return null or 0.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.2.1.10
vnsMgmtTrafficEnable Specifies whether clients in the VNS have access to EWC management elements.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.2.1.11
vnsUseDHCPRelay This variable indicates what type of DHCP is used for the VNS. none(0): No DHCP server on the VNS. dhcpRelay(1): Uses DHCP relay to reach the DHCP server. localDhcp(2): Uses local DHCP server on the controler.	Enumerationr/w Enumerated Values: 0 none 1 dhcpRelay 2 localDhcp	.1.3.6.1.4.1.4329.15.3.3.1.2.1.12
vns3rdPartyAP When true, specifies that the VNS contains 3rd party access points. Only one such VNS may be defined for a WirelessController.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.2.1.13
vnsStatus RowStatus variable for performing row operations on vnsConfigTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.3.1.2.1.14
vnsMode Type of traffic for this VNS. routed(1): The traffic is routed at the controller. bridgeAtController(2): Traffic is bridged at controller. bridgeAtAP(3): Traffic is bridged at Access Points. wds(4): Wireless Distribute…	Enumerationr/w Enumerated Values: 1 routed 2 bridgeAtController 3 bridgeAtAP 4 wds 5 thirdParty	.1.3.6.1.4.1.4329.15.3.3.1.2.1.15
vnsVlanID VLAN tag for the packets trasmitted to/from of the VNS. This value has meaning if vnsMode is bridgeAtController(2) or bridgeAtAP(3). If vnsMode = bridgeAtController(2), tagging is done at controller. If vnsMode = bridge…	Integer32r/w Constraints: range: -1-4094	.1.3.6.1.4.1.4329.15.3.3.1.2.1.16
vnsInterfaceName Physical interface to be used in the controller for trasmitting/receiving packets for the VNS. This value has meaning if vnsMode is bridgeAtController(2).	OctetStringr/w	.1.3.6.1.4.1.4329.15.3.3.1.2.1.17
vnsMgmIpAddress IP address of the management port associated to this VNS. This value has meaning if vnsMode is bridgeAtController(2).	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.1.2.1.18
vnsSuppressSSID If set to true, this prevents this SSID from appearing in the beacon message.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.2.1.19
vnsEnable11hSupport If true, enables 802.11h support.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.2.1.20
vnsApplyPowerBackOff Indicates whether the AP will direct 802.11h-enabled clients to apply the same power back-off setting that the AP is using	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.2.1.21
vnsProcessClientIEReq If true, enables support for 802.11d client information request.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.2.1.22
vnsDLSSupportEnable If true, enables support for DLS Support. This value has meaning only if vnsUseDHCPRelay is selected as localDhcp(2) and vnsMode is select as either routed(1) or bridgeAtController(2).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.2.1.23
vnsDLSAddress DNS IP Address for DLS associated to this VNS. It could be IP address or Name	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.2.1.24
vnsDLSPort DNS Port for DLS associated to this VNS.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.2.1.25
vnsRateControlProfile The Rate Control Profile that is referenced by this VNS.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.2.1.26
vnsSessionAvailabilityEnable To indicate if Session Availability feature is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.2.1.27
vnsEnabled VNS status of being enabled or disabled.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4329.15.3.3.1.2.1.28
vnsStrictSubnetAdherence Subnet adherence verification status for the VNS. Controller only learns devices whose address is within range of VNS segment definition. Disabling this field causes to not enforce validation. Doing so, may expose the …	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4329.15.3.3.1.2.1.29
vnsSLPEnabled Status of SLP flag on Bridge at Controller type VNS. This field does not have any meaning for other types of VNS.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4329.15.3.3.1.2.1.30
vnsConfigWLANID Creation of VNS requires existing of a free WLAN. One WLAN can only be used in one VNS only. This ID identifies the WLAN that is used for creation of VNS that is identified by this row.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.1.2.1.31

vnsDHCPRangeTable contains the IP address ranges that DHCP
will serve to clients associated with this VNS.

vnsDHCPRangeEntry row .1.3.6.1.4.1.4329.15.3.3.1.3.1

Configuration information for a DHCP range.

Indexes

IF-MIBifIndex vnsDHCPRangeIndex

Column	Syntax	OID
vnsDHCPRangeIndex Index for the DHCP row element.	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.4329.15.3.3.1.3.1.1
vnsDHCPRangeStart First IP address in the range.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.1.3.1.2
vnsDHCPRangeEnd Last IP address in the range.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.1.3.1.3
vnsDHCPRangeType Determines whether addresses in the specified range will be included, or excluded by the DHCP server.	Enumerationr/w Enumerated Values: 1 inclusion 2 exclusion	.1.3.6.1.4.1.4329.15.3.3.1.3.1.4
vnsDHCPRangeStatus Row status variable for row operations on the vnsDHCPRangeTable	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.3.1.3.1.5

Details of the Captive Portal login page for 
VNSes that have vnsAssignment=ssid and 
vnsAuthModel=captivePortal.

vnsCaptivePortalEntry row .1.3.6.1.4.1.4329.15.3.3.1.4.1

Captive Portal Information for the VNS.

Indexes

IF-MIBifIndex

Column	Syntax	OID
cpURL Redirect URL of the Captive Portal login page.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.4.1.1
cpLoginLabeldeprecated Label that appears in front of the login field on the Captive Portal login page.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.4.1.2
cpPasswordLabeldeprecated Label that appears in front of the password field on the Captive Portal login page.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.4.1.3
cpHeaderURLdeprecated URL of the Captive Portal header.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.4.1.4
cpFooterURLdeprecated URL of the Captive Portal footer.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.4.1.5
cpMessagedeprecated A welcome message, or set of instructions that is to appear on the Captive Portal login page.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.4.1.6
cpReplaceGatewayWithFQDN Fully Qualified Domain Name (FQDN) to be used as the gateway IP address.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.4.1.7
cpDefaultRedirectionURL Default Redirect URL of the Captive Portal login page.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.4.1.8
cpConnectionIP IP address of the Controller interface for Captive Portal.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.1.4.1.9
cpConnectionPort Port number on the cpConnectionIP interface.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.4.1.10
cpSharedSecret Secret Key to be used to encrypt the information passed between the Controller and the external web server. It is the password common to both Controller and the external web server.	OctetStringr/w	.1.3.6.1.4.1.4329.15.3.3.1.4.1.11
cpLogOff Toggles the display of logoff popup screen, allowing users to control their logoff.	Enumerationr/w Enumerated Values: 0 off 1 on	.1.3.6.1.4.1.4329.15.3.3.1.4.1.12
cpStatusCheck Toggles the display of popup window with session statistics for users to monitor their usage and time left in session.	Enumerationr/w Enumerated Values: 0 off 1 on	.1.3.6.1.4.1.4329.15.3.3.1.4.1.13
cpType Type of captive portal is enabled for the selected VNS. none(1) = no captive portal configured or type is unknown. internal(2) = internal captive portal. external(4) = external captive portal. guestPortal (5) = open hos…	Enumerationr/w Enumerated Values: 1 none 2 internal 4 external 5 guestPortal	.1.3.6.1.4.1.4329.15.3.3.1.4.1.14

List of RADIUS servers to be utilized for authentication in the VNS.

vnsRadiusServerEntry row .1.3.6.1.4.1.4329.15.3.3.1.5.1

Configuration information for a RADIUS server.

Indexes

IF-MIBifIndex vnsRadiusServerName

Column	Syntax	OID
vnsRadiusServerName Name of the RADIUS server.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.5.1.1
vnsRadiusServerPort Port number for the RADIUS server.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.5.1.2
vnsRadiusServerRetries Number of retries for a RADIUS authentication request.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.5.1.3
vnsRadiusServerTimeout Delay between requests.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.5.1.4
vnsRadiusServerSharedSecret Shared secret to be used between the NAS and RADIUS server.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.5.1.5
vnsRadiusServerNASIdentifier NAS identifier to be included in RADIUS request.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.5.1.6
vnsRadiusServerAuthType Challenge mechanism for the request.	Enumerationr/w Enumerated Values: 0 pap 1 chap 2 msChap 3 msChapV2 4 notApplicable	.1.3.6.1.4.1.4329.15.3.3.1.5.1.7
vnsRadiusServerRowStatus RowStatus value for manipulating vnsRADIUSServerTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.3.1.5.1.8
vnsRadiusServerNasAddress NAS address to be included in RADIUS request.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.1.5.1.9

Table of names filters for a VNS.

vnsFilterIDEntry row .1.3.6.1.4.1.4329.15.3.3.1.6.1

Name of a specific filter in the VNS.

Indexes

IF-MIBifIndex vnsFilterID

Column	Syntax	OID
vnsFilterID Filter names.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.6.1.1
vnsFilterIDStatus RowStatus for operating on vnsFilterIDTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.3.1.6.1.2

Table containing specific filters for a named filter.

vnsFilterRuleEntry row .1.3.6.1.4.1.4329.15.3.3.1.7.1

Filter elements for an individual VNS filter.

Indexes

IF-MIBifIndex vnsFilterID vnsFilterRuleOrder

Column	Syntax	OID
vnsFilterRuleOrder Position of the filter in the filter list.	Integer32r/w Constraints: range: 1-65532	.1.3.6.1.4.1.4329.15.3.3.1.7.1.1
vnsFilterRuleDirection Traffic direction defined by the rule.	Enumerationr/w Enumerated Values: 0 none 1 in 2 out 3 both	.1.3.6.1.4.1.4329.15.3.3.1.7.1.2
vnsFilterRuleAction Allow or deny traffic for the filter.	Enumerationr/w Enumerated Values: 1 allow 2 disallow	.1.3.6.1.4.1.4329.15.3.3.1.7.1.3
vnsFilterRuleIPAddress IP address to apply the filter.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.1.7.1.4
vnsFilterRulePortLow Low port number for the filter.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.7.1.5
vnsFilterRulePortHigh High port number for the filter.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.7.1.6
vnsFilterRuleProtocol Specific protocol to filter.	Enumerationr/w Enumerated Values: 0 none 1 notApplicable 2 tcp 3 udp 4 icmp 5 ipsecESP 6 ipsecAH	.1.3.6.1.4.1.4329.15.3.3.1.7.1.7
vnsFilterRuleEtherType Specific ethertype to filter.	Enumerationr/w Enumerated Values: 0 none 1 ip 2 arp 3 rarp	.1.3.6.1.4.1.4329.15.3.3.1.7.1.8
vnsFilterRuleStatus RowStatus value for the vnsFilterRuleTable.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.3.1.7.1.9

Table of privacy settings for the VNS.

vnsPrivacyEntry row .1.3.6.1.4.1.4329.15.3.3.1.8.1

Configuration values for a specific privacy setting.

Indexes

IF-MIBifIndex

Column	Syntax	OID
vnsPrivWEPKeyType Type of key in use. none(1) = not cofigured, wepstatic(2) = static WEP, wpapsk(3) = WPA Pre-Shared Key, dynamic(4) = dynamically assigned, wpa(5) = WPA.	Enumerationr/w Enumerated Values: 1 none 2 wepstatic 3 wpapsk 4 dynamic 5 wpa	.1.3.6.1.4.1.4329.15.3.3.1.8.1.1
vnsPrivDynamicRekeyFrequency Dynamic WEP re-keying frequency, in seconds. Setting this value to 0 disables rekeying. This value is only meaningful if vnsPrivWEPKeyType = wpapsk(3). For any other values of vnsPrivWEPKeyType, reading…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.8.1.2
vnsPrivWEPKeyLength WEP key length, 64, 128, or 152 bits. If vnsPrivWEPKeyType is none, reading or setting this value will return an unsuccessful status and will return a value of null or zero.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.8.1.3
vnsPrivWPA1Enabled Enables WPA.1 (Wi-Fi Protected Access).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.8.1.4
vnsPrivUseSharedKey Enables the use of WPA shared key for this VNS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.8.1.5
vnsPrivWPASharedKey The value of the WPA shared key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.8.1.6
vnsPrivWPA2Enabled When true, WPA v.2 support is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.1.8.1.7

Table of WEP key entries for a static WEP definition.

vnsWEPKeyEntry row .1.3.6.1.4.1.4329.15.3.3.1.9.1

WEP key for a single entry in the table.

Indexes

IF-MIBifIndex vnsWEPKeyIndex

Column	Syntax	OID
vnsWEPKeyIndex Table index for the WEP key.	Integer32r/w Constraints: range: 1-4	.1.3.6.1.4.1.4329.15.3.3.1.9.1.1
vnsWEPKeyValue Value of a WEP key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero.	IEEE802dot11-MIBWEPKeytyper/w Type Constraints: range: 5	.1.3.6.1.4.1.4329.15.3.3.1.9.1.2

Contains a list of 3rd Party access points for 
the EWC.

vns3rdPartyAPEntry row .1.3.6.1.4.1.4329.15.3.3.1.10.1

Configuration information for a 3rd party access point.

Indexes

IF-MIBifIndex apMacAddress

Column	Syntax	OID
apMacAddress Ethernet MAC address of the 3rd party access point.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4329.15.3.3.1.10.1.1
apIpAddress IP address of the 3rd party access point.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.1.10.1.2

This table contains list of per-VNS QoS related configuration.

vnsQoSEntry row .1.3.6.1.4.1.4329.15.3.3.1.11.1

An entry related to QoS configuration for the VNS indexed by vnsIfIndex.

Indexes

vnsIfIndex

Column	Syntax	OID
vnsQoSWirelessLegacyFlag This variable is used to enable/disable legacy QoS feature.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.1
vnsQoSWirelessWMMFlag This variable is used to enable/disable WMM feature.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.2
vnsQoSWireless80211eFlag This variable is used to enable/disable 802.11e feature.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.3
vnsQoSWirelessTurboVoiceFlag This variable is used to enable/disable turbo feature.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.4
vnsQoSPriorityOverrideFlag Enable/disable the use of DSCP to override Servic Class (SC) value.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.5
vnsQoSPriorityOverrideSC Service class (SC) of the override value. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled.	Enumerationr/w Enumerated Values: 0 background 1 bestEffort 2 bronze 3 silver 4 gold 5 platinum 6 premiumVoice 7 networkControl	.1.3.6.1.4.1.4329.15.3.3.1.11.1.6
vnsQoSPriorityOverrideDSCP DSCP override value to be used for the service class. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.4329.15.3.3.1.11.1.7
vnsQoSClassificationServiceClass Service Class value for the DSCP code. This field is 64-bytes long. Each byte represents mapping between DSCP and Service Class. Position of each byte in the array represents DSCP code and the content of each byte repr…	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.4329.15.3.3.1.11.1.8
vnsQoSWirelessEnableUAPSD This variable is used to enable/disable U-APSD feature.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.9
vnsQoSWirelessUseAdmControlVoice If enabled, admission control for voice traffic is used.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.10
vnsQoSWirelessUseAdmControlVideo If enabled, admission control for vedio traffic is used. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.11
vnsQoSWirelessULPolicerAction If doNothing is selected, no action is taken. This is default value. If sendDELTStoClient is selected, AP will send DELTS if a client is abusing in uplink. This field has a meaning only if admission control is enabled …	Enumerationr/w Enumerated Values: 0 doNothing 1 sendDELTStoClient	.1.3.6.1.4.1.4329.15.3.3.1.11.1.12
vnsQoSWirelessDLPolicerAction If doNothing is selected, no action is taken. This is default value. If downgrade is selected, AP will downgrade all traffic to the highest AC that does not require CAC in downlink. If drop is selected, AP will drop…	Enumerationr/w Enumerated Values: 0 doNothing 1 downgrade 2 drop	.1.3.6.1.4.1.4329.15.3.3.1.11.1.13
vnsQoSWirelessUseAdmControlBestEffort If enabled, admission control for video traffic is set to Best Effort. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.14
vnsQoSWirelessUseAdmControlBackground If enabled, admission control for video traffic is set to Background. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled.	Enumerationr/w Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.4329.15.3.3.1.11.1.15

ontains definitions of the Wireless Distirbution System (WDS) VNS defined on this Controller.

vnsWDSRFEntry row .1.3.6.1.4.1.4329.15.3.3.1.12.1

Configuration elements for a specific WDS VNS.

Indexes

vnsIfIndex apIndex

Column	Syntax	OID
vnsWDSRFAPNameobsolete AP name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.12.1.1
vnsWDSRFbgServiceobsolete Type of service offered by this radio.	Enumerationr/w Enumerated Values: 0 notAvailable 1 none 2 child 3 parent 4 both	.1.3.6.1.4.1.4329.15.3.3.1.12.1.2
vnsWDSRFaServiceobsolete Type of service offered by this radio.	Enumerationr/w Enumerated Values: 0 notAvailable 1 none 2 child 3 parent 4 both	.1.3.6.1.4.1.4329.15.3.3.1.12.1.3
vnsWDSRFPreferredParentobsolete Desired preferred parent.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.12.1.4
vnsWDSRFBackupParentobsolete Desired backup parent.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.12.1.5
vnsWDSRFBridgeobsolete WDS bridge status.	Enumerationr/w Enumerated Values: 1 bridged 2 notBridged	.1.3.6.1.4.1.4329.15.3.3.1.12.1.6

Table of Rate Control Profiles.

vnsRateControlProfEntry row .1.3.6.1.4.1.4329.15.3.3.1.13.1

Name of a specific Rate Control Profile.

Indexes

vnsRateControlProfInd

Column	Syntax	OID
vnsRateControlProfIndobsolete A monotonically increasing integer which acts as index of entries within the named Rate Control Profiles.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.1.13.1.1
vnsRateControlProfNameobsolete Rate Control Profile Name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.1.13.1.2
vnsRateControlCIRobsolete Rate Control Average Rate (CIR) in kbps.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.1.13.1.3
vnsRateControlCBSobsolete Rate Control Burst Size (CBS) in bytes.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.1.13.1.4

Filters applied to Access Points via VNS settings and assignments.

vnsAPFilterEntry row .1.3.6.1.4.1.4329.15.3.3.1.14.1

An entry containing filters definition for Access Points assigned
to VNS that is identified by VNS index.

Indexes

IF-MIBifIndex vnsFilterID vnsAPFilterRuleOrder

Column	Syntax	OID
vnsAPFilterRuleOrder Position of the filter in the filter list.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4329.15.3.3.1.14.1.1
vnsAPFilterRuleDirection Traffic direction related to the filter rule.	Enumerationr/w Enumerated Values: 1 in 2 out 3 both	.1.3.6.1.4.1.4329.15.3.3.1.14.1.2
vnsAPFilterAction Allow or deny traffic for the filter.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.14.1.3
vnsAPFilterIPAddress IP address applied to the filter.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.1.14.1.4
vnsAPFilterMask The mask, number of bits set to one in the mask, applied to filter IP address.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.1.14.1.5
vnsAPFilterPortLow Low port number for the filter.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.14.1.6
vnsAPFilterPortHigh High port number for the filter.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.14.1.7
vnsAPFilterProtocol Specific protocol for the filter.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.14.1.8
vnsAPFilterEtherType Specific ethertype to the filter.	Enumerationr/w Enumerated Values: 1 ip 2 arp 3 rarp	.1.3.6.1.4.1.4329.15.3.3.1.14.1.9
vnsAPFilterRowStatus RowStatus value for this table entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.1.14.1.10

Description.

vnsStatEntry row .1.3.6.1.4.1.4329.15.3.3.2.2.1

Description.

Indexes

vnsIfIndex

Column	Syntax	OID
vnsStatNameobsolete Name of the VNS.	OctetStringr/w	.1.3.6.1.4.1.4329.15.3.3.2.2.1.1
vnsStatTxPktsobsolete Trasmitted packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.2
vnsStatRxPktsobsolete Received packtes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.3
vnsStatTxOctectsobsolete Trasmitted octects.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.4
vnsStatRxOctectsobsolete Received octets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.5
vnsStatMulticastTxPktsobsolete Multicast trasmitted packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.6
vnsStatMulticastRxPktsobsolete Multicast received packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.7
vnsStatBroadcastTxPktsobsolete Broadcast trasmitted packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.8
vnsStatBroadcastRxPktsobsolete Broadcast received packets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.9
vnsStatRadiusTotRequestsobsolete Total requests sent to radius server.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.10
vnsStatRadiusReqFailedobsolete Requests that failed to be processed by radius server.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.11
vnsStatRadiusReqRejectedobsolete Requests that have been rejected by radius server.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.2.1.12

Description.

vnsExceptionStatEntry row .1.3.6.1.4.1.4329.15.3.3.2.3.1

Description.

Indexes

vnsIfIndex vnsExceptionFiterName

Column	Syntax	OID
vnsExceptionFiterNameobsolete Filter name.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.4329.15.3.3.2.3.1.1
vnsExceptionStatPktsDeniedobsolete Total packets that are denied by defined filters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.3.1.2
vnsExceptionStatPktsAllowedobsolete Total packets that are allowed by defined filters.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.3.1.3

Description.

vnsWDSStatEntry row .1.3.6.1.4.1.4329.15.3.3.2.4.1

Description.

Indexes

vnsIfIndex apIndex

Column	Syntax	OID
vnsWDSStatAPNameobsolete AP name serving WDS VNS.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.2.4.1.1
vnsWDSStatAPRoleobsolete Role of the AP in WDS tree. All the statistics and configuration information in this table has no meaning if the role is unknown(-1).	Enumerationr/w Enumerated Values: -1 unknown 0 none 1 satellite 2 root 3 repeater	.1.3.6.1.4.1.4329.15.3.3.2.4.1.2
vnsWDSStatAPRadioobsolete Radio and freq on which uplink WDS is established, N/A if connected over etherent (value are 'a:<freq>', 'b/g:<freq>', or 'N/A')	SNMPv2-TCDisplayStringr/w Constraints: range: 0-15 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.2.4.1.3
vnsWDSStatAPParentobsolete AP Name of the parent AP.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.2.4.1.4
vnsWDSStatSSIDobsolete SSID of the WDS VNS where parent WDS link is established.	SNMPv2-TCDisplayStringr/w Constraints: range: 0-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.2.4.1.5
vnsWDSStatRxFrameobsolete Received frames from the parent AP.	SNMPv2-SMICounter64r/w Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.4.1.6
vnsWDSStatTxFrameobsolete Transmitted frames to the parent AP.	SNMPv2-SMICounter64r/w Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.4.1.7
vnsWDSStatRxErrorobsolete Received frames in error from the parent AP.	SNMPv2-SMICounter64r/w Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.4.1.8
vnsWDSStatTxErrorobsolete Transmitted frames in error to the parent AP.	SNMPv2-SMICounter64r/w Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.4.1.9
vnsWDSStatRxRSSIobsolete Average Received Signal Strength Indicator (RSSI).	Integer32r/w Constraints: range: 0-64	.1.3.6.1.4.1.4329.15.3.3.2.4.1.10
vnsWDSStatRxRateobsolete Average receive rate.	SNMPv2-SMICounter64r/w Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.4.1.11
vnsWDSStatTxRateobsolete Average transmission rate.	SNMPv2-SMICounter64r/w Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4329.15.3.3.2.4.1.12

Table of external RADIUS servers available for authentication services.

externalRadiusServerEntry row .1.3.6.1.4.1.4329.15.3.3.3.2.2.1

Configuration information about the RADIUS server entry.

Indexes

externalRadiusServerName

Column	Syntax	OID
externalRadiusServerNameobsolete RADIUS server name.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.3.2.2.1.1
externalRadiusServerAddressobsolete RADIUS server address, it can be either string or IP address.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.3.2.2.1.2
externalRadiusServerSharedSecretobsolete Shared secret between Radius and the client.	OctetStringr/w Constraints: range: 0-64	.1.3.6.1.4.1.4329.15.3.3.3.2.2.1.3
externalRadiusServerRowStatusobsolete Row Status for the entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.3.3.2.2.1.4

Table in which to configure which RADIUS servers will be sent interim accounting 
reports for stations when a fast failover incident occurs

radiusFastFailoverEventsEntry row .1.3.6.1.4.1.4329.15.3.3.3.6.1.1

An entry for each radius server.

Indexes

radiusFFOEid

Column	Syntax	OID
radiusFFOEid The IP address or hostname of configured radius server. If the hostname is created from GUI/CLI and the size is bigger than 64 characters, snmp will display the first 64 characters only.	SNMPv2-TCDisplayString Constraints: range: 1-64 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.3.6.1.1.1
fastFailoverEvents If true, send an interim accounting record to the RADIUS server for each affected station when a fast failover event occurs. This field can be modified when controller is operated in availablity paired mode and fast fa…	Enumerationr/w Enumerated Values: 0 fastFailoverEventsDisabled 1 fastFailoverEventsEnabled	.1.3.6.1.4.1.4329.15.3.3.3.6.1.1.2

A list of servers to which DHCP messages are relayed but from which no responses are 
expected.

dhcpRelayListenersEntry row .1.3.6.1.4.1.4329.15.3.3.3.7.4.1

An entry for each dhcpRelayListeners.

Indexes

dhcpRelayListenersID

Column	Syntax	OID
dhcpRelayListenersID The id corresponds to the 'server number' in the controller GUI and CLI.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.3.7.4.1.1
dhcpRelayListenersRowStatus This object allows dynamic creation and deletion of entries within dhcpRelayListenersTable as well as activation and deactivation of these entries. For row creation, EWC only supports creatAndWait.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.3.3.7.4.1.2
destinationName Text string uniquely identifying NAC Server Name. Allowable characters for this field are from the set of A-Z, a-z, -_!#$, 0-9, and space. max len is 63 chars Howerver, it is recommended to avoid leading and trailing s…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.3.7.4.1.3
destinationIP IPv4 address to which DHCP messages are relayed.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.4329.15.3.3.3.7.4.1.4

List of RADIUS servers that will be used.

radiusExtnsSettingEntry row .1.3.6.1.4.1.4329.15.3.3.3.10.1.1

An entry for each RADIUS server.

Indexes

radiusExtnsIndex

Column	Syntax	OID
radiusExtnsIndex A number uniquely identifying each conceptual row in the radiusExtnsSettingTable. This value also equivalent to etsysRadiusAuthServerIndex of enterasys-radius-auth-client-mib.txt file.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.4329.15.3.3.3.10.1.1.1
pollingMechanism This field specifies the method to determine the health of the RADIUS server. If set to useRFC5997StatusServerRequest(1), RFC 5997 Status-Server packets will be sent to the primary server to determine it's health. I…	Enumerationr/w Enumerated Values: 0 authorizeAsActualUser 1 useRFC5997StatusServerRequest	.1.3.6.1.4.1.4329.15.3.3.3.10.1.1.2
serverPollingInterval Interval in seconds for the controller to poll the primary server.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4329.15.3.3.3.10.1.1.3

Table of configured WLAN.

wlanEntry row .1.3.6.1.4.1.4329.15.3.3.4.4.1

An entry for each WLAN.

Indexes

wlanID

Column	Syntax	OID
wlanID Unique internal ID associated with WLAN.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.4.4.1.1
wlanRowStatus This object allows dynamic creation and deletion of entries within wlanTable as well as activation and deactivation of these entries. For row creation, EWC only supports creatAndWait. WLAN name must be set before making…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4329.15.3.3.4.4.1.2
wlanServiceType Service type of WLAN.	Enumerationr/w Enumerated Values: 0 standard 3 wds 4 thirdParty 5 remote 6 mesh	.1.3.6.1.4.1.4329.15.3.3.4.4.1.3
wlanName Text string uniquely identifying WLAN within EWC. Allowable characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Howerver, it is recommended to avoid leading and trailing spaces.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.4.4.1.4
wlanSSID SSID (broadcast string) associated with WLAN. Allowable characters for this field are from the set of A-Z, a-z, _-.@, 0-9, and space. Howerver, it is recommendedto avoid leading and trailing spaces.	SNMPv2-TCDisplayStringr/w Constraints: range: 1-32 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4329.15.3.3.4.4.1.5
wlanSynchronize If it is set to true, then WLAN will be replicated to peer controller if availability is configured and enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.4.4.1.6
wlanEnabled This field is used to enable or disable this WLAN. If WLAN is disabled, then no traffic will be passed on behalf of this WLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.4.4.1.7
wlanDefaultTopologyID The ID of topology from topologyTable associated to this WLAN. Topology ID of -1 means no default topology is associated to this WLAN. Physical topologies cannot be assigned to WLAN. The default topology indicates which…	Integer32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.4329.15.3.3.4.4.1.8
wlanSessionTimeout MU session that is associated to this WLAN will be terminated after elapse of this number of minutes from the start of its current session.	minuteSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.4.4.1.9
wlanIdleTimeoutPreAuth Elapse time between association and authentication after which MU session will be terminated if the user is idle this amount of time without being authenticated.	minuteSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.4.4.1.10
wlanIdleSessionPostAuth MU session that is associated to this WLAN will be terminated if the user is idle this amount of time after being authenticated.	minuteSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.4.4.1.11
wlanSupressSSID If it is set to true then broadcast string (SSID) for this WLAN will not be broadcasted over the air.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.4.4.1.12
wlanDot11hSupport If it is set to true then dot11h support is enabled for clients associated to this WLAN.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.4.4.1.13
wlanDot11hClientPowerReduction If it is set to true then apply power reduction to dot11h clients associated to this WLAN. This field has meaning if wlanDot11hSupport is enabled (set to true).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.4.4.1.14
wlanProcessClientIE If it is set to true then clients that are associated to this WLAN their IE requests will be processed.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.4.4.1.15
wlanEngerySaveMode If it is set to true then engergy saving mode is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.4.4.1.16
wlanBlockMuToMuTraffic If it is set to true then two MU associated to this WLAN cannot communicate with each other.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.4.4.1.17
wlanRemoteable If it is set to true then this WLAN can be used as remote WLAN within mobility zone that this controller is partaking.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4329.15.3.3.4.4.1.18
wlanVNSID The ID of the VNS that uses this WLAN. WLAN can be created but not used in any VNS, in that case alue of zero indicates WLAN has not been used in any VNS. The value of this field set during VNS creation no during the …	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4329.15.3.3.4.4.1.19
wlanRadioManagement11k When this bit is set to enable, the Radio Management (802.11k) feature is enabled on those APs who have this wlan configuration and 802.11k capability.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.4329.15.3.3.4.4.1.20
wlanBeaconReport Enable/disable AP to send out beacon report. This field is configurable only if wlanRadioManagement11k is set to enable(1).	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.4329.15.3.3.4.4.1.21
wlanQuietIE Enable/disable AP to advertise a Quiet Element. This field is configurable only if wlanRadioManagement11k is set to enable(1).	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.4329.15.3.3.4.4.1.22
wlanMirrorN prohibited(0): Mirroring is prohibited. bothDirection(1) : Both direction packets will be mirrored. rxDirectionOnly(2): Only receive direction packets will be mirrored. Note: This will only take effect when the user's…	Enumerationr/w Enumerated Values: 0 prohibited 1 bothDirection 2 rxDirectionOnly	.1.3.6.1.4.1.4329.15.3.3.4.4.1.23
wlanNetFlow Enable/disable netflow on this WLAN service.	Enumerationr/w Enumerated Values: 0 disable 1 enable	.1.3.6.1.4.1.4329.15.3.3.4.4.1.24
wlanAppVisibility Enable/disable both application visibility and control for this WLAN service.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4329.15.3.3.4.4.1.25