HH3C-TUNNEL-MIB Table View

The (conceptual) table containing information on configured tunnels.

hh3cTunnelIfEntry row .1.3.6.1.4.1.25506.2.53.1.1.1.1

An entry (conceptual row) containing the information on a
particular configured tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelIfEncapsMethod The encapsulation method used by the tunnel.	Hh3cTunnelTyper/w Type Values: 1 other 2 direct 3 gre 4 minimal 5 l2tp 6 pptp 7 l2f 8 udp 9 atmp 10 msdp 11 sixToFour 12 sixOverFour 13 isatap 14 teredo 35 tunnelModeReserve 36 tunnelModeIPv4Gre 37 tunnelModeIPv6Gre 38 tunnelModeIPv4IPv4 39 tunnelModeIPv4IPv6Config 40 tunnelModeIPv4IPv6Auto 41 tunnelModeIPv4IPv66to4 42 tunnelModeIPv4IPv6Isatap 43 tunnelModeIPv6IPv4 44 tunnelModeIPv6IPv6 45 tunnelModeIPv4UdpDVPN 46 tunnelModeIPv4GreDVPN 47 tunnelModeIPv6UdpDVPN 48 tunnelModeIPv6GreDVPN 49 tunnelModeCrLsp 50 tunnelModeMax 51 tunnelModeIPv4UdpVxlan 52 tunnelModeIPv6UdpVxlan 53 tunnelModeIPv4NVGRE 54 tunnelModeIPv6NVGRE	.1.3.6.1.4.1.25506.2.53.1.1.1.1.3
hh3cTunnelIfHopLimit The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header.	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.1.1.4
hh3cTunnelIfSecurity The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or encryption or both. More specific security-related informati…	Enumeration	.1.3.6.1.4.1.25506.2.53.1.1.1.1.5
hh3cTunnelIfTOS The method used to set the high 6 bits (the differentiated services codepoint) of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indicates that the bits are copied from the payload's header. …	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.1.1.6
hh3cTunnelIfFlowLabel The method used to set the IPv6 Flow Label value. This object need not be present in rows where hh3cTunnelIfAddressType indicates the tunnel is not over IPv6. A value of -1 indicates that a traffic conditioner is invok…	IPV6-FLOW-LABEL-MIBIPv6FlowLabelOrAny Type Constraints: range: -1..1048575	.1.3.6.1.4.1.25506.2.53.1.1.1.1.7
hh3cTunnelIfAddressType The type of address in the corresponding hh3cTunnelIfLocalInetAddress and hh3cTunnelIfRemoteInetAddress objects.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.25506.2.53.1.1.1.1.8
hh3cTunnelIfLocalInetAddress The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by hh3c…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.1.1.9
hh3cTunnelIfRemoteInetAddress The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel), the val…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.1.1.10
hh3cTunnelIfEncapsLimit The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size).	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.1.1.11

The (conceptual) table containing information on
configured tunnels.  This table can be used to map a
set of tunnel endpoints to the associated ifIndex
value.  It can also be used for row creation.  Note
that every row in the hh3cTunnelIfTable with a fixed
destination address should have a corresponding row in
the hh3cTunnelInetConfigTable, regardless of whether it
was created via SNMP.

hh3cTunnelInetConfigEntry row .1.3.6.1.4.1.25506.2.53.1.1.3.1

An entry (conceptual row) containing the information
on a particular configured tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelInetConfigSlot Slot number. hh3cTunnelInetConfigSlot, hh3cTunnelInetConfigSubSlot and hh3cTunnelInetConfigTunnNum describe a tunnel interface. For Example, interface tunnel 0/0/25 would be configured as: hh3cTunnelInetConfigSlot …	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.3.1.1
hh3cTunnelInetConfigSubSlot Sub slot number. As described in hh3cTunnelInetConfigSlot's description.	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.3.1.2
hh3cTunnelInetConfigTunnNum Tunnel number. As described in hh3cTunnelInetConfigSlot's description.	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.3.1.3
hh3cTunnelInetConfigIfIndex If the value of hh3cTunnelInetConfigStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value of 0 is not legal in the active state, and means that the…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.25506.2.53.1.1.3.1.6
hh3cTunnelInetConfigStatus The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable obj…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.53.1.1.3.1.7

The (conceptual) table containing information on configured EVI-Tunnel.

hh3cTunnelEviEntry row .1.3.6.1.4.1.25506.2.53.1.1.4.1

An entry (conceptual row) containing the information on a
particular configured EVI-Tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelEviTunnNum Tunnel number. An identifier used to distinguish between multiple tunnels.	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.4.1.1
hh3cTunnelEviIfIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.25506.2.53.1.1.4.1.2
hh3cTunnelEviStatus The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable obj…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.53.1.1.4.1.3
hh3cTunnelEviAddressType The type of address in the corresponding hh3cTunnelEviLocalAddr objects. Can not be modified after creation.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.25506.2.53.1.1.4.1.4
hh3cTunnelEviLocalAddr The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). The type of this object is given by hh3cTunnelEviAddressType.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.4.1.5
hh3cTunnelEviNetworkID The method used to assign a network ID to an EVI-Tunnel interface. Assign the same network ID to the EVI-Tunnel interfaces of all edge devices in an EVI network. A value of 0 indicates that no network ID is assigned to…	Integer32r/w	.1.3.6.1.4.1.25506.2.53.1.1.4.1.6
hh3cTunnelEviKeepaliveInterval The method used to assign the keepalive interval.	Integer32r/w	.1.3.6.1.4.1.25506.2.53.1.1.4.1.7
hh3cTunnelEviKeepaliveTimes The method used to assign the keepalive maximum number of consecutive keepalive failures that are allowed.	Integer32r/w	.1.3.6.1.4.1.25506.2.53.1.1.4.1.8

The (conceptual) table containing information on configured EVI-Link.

hh3cTunnelEviLinkEntry row .1.3.6.1.4.1.25506.2.53.1.1.5.1

An entry (conceptual row) containing the information on a
particular configured EVI-Link.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelEviLinkNum EVI-Link number.	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.5.1.1
hh3cTunnelEviLinkIfIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.25506.2.53.1.1.5.1.2
hh3cTunnelEviLinkAddressType The type of address in the corresponding hh3cTunnelEviLinkRemoteAddr objects. Can not be modified after creation.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.25506.2.53.1.1.5.1.3
hh3cTunnelEviLinkRemoteAddr The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header).	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.5.1.4

The (conceptual) table containing information on configured Gre-Tunnel.

hh3cTunnelGreEntry row .1.3.6.1.4.1.25506.2.53.1.1.6.1

An entry (conceptual row) containing the information on a
particular configured Gre-Tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelGreTunnNum Tunnel number. An identifier used to distinguish between multiple tunnels.	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.6.1.1
hh3cTunnelGreTunnIfIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.25506.2.53.1.1.6.1.2
hh3cTunnelGreAddressType The type of address in the corresponding hh3cTunnelGreLocalAddr and hh3cTunnelGreRemoteAddr objects.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.25506.2.53.1.1.6.1.3
hh3cTunnelGreLocalAddr The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.6.1.4
hh3cTunnelGreRemoteAddr The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.6.1.5
hh3cTunnelGreKeepaliveEnabled This MIB object specifies whether or not keepalive is used. A value of true indicates that keepalive SHOULD be used. When keepalive is not be used, the value of hh3cTunnelGreKeepaliveInterval and hh3cTunnelGreKeepaliveT…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.25506.2.53.1.1.6.1.6
hh3cTunnelGreKeepaliveInterval The method used to assign the keepalive interval. The value is zero when keepalive is not used. The valid value is from 1 to 32767, when keepalive is used.	Integer32r/w	.1.3.6.1.4.1.25506.2.53.1.1.6.1.7
hh3cTunnelGreKeepaliveTimes The method used to assign the keepalive maximum number of consecutive keepalive failures that are allowed. The value is zero when keepalive is not used. The valid value is from 1 to 255, when keepalive is used.	Integer32r/w	.1.3.6.1.4.1.25506.2.53.1.1.6.1.8
hh3cTunnelGreSlbgGroupNum The method used to assign the service-loopback-group.	Unsigned32r/w	.1.3.6.1.4.1.25506.2.53.1.1.6.1.9
hh3cTunnelGreTunnStatus The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable obj…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.53.1.1.6.1.10

The (conceptual) table containing information on configured Vxlan-Tunnel.

hh3cTunnelVxlanIfEntry row .1.3.6.1.4.1.25506.2.53.1.1.7.1

An entry (conceptual row) containing the information on a
particular configured Vxlan-Tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelVxlanIfTunnNum Tunnel number. An identifier used to distinguish between multiple tunnels.	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.7.1.1
hh3cTunnelVxlanTunnIfIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.25506.2.53.1.1.7.1.2
hh3cTunnelVxlanIfAddressType The type of address in the corresponding hh3cTunnelVxlanIfLocalAddr and hh3cTunnelVxlanIfRemoteAddr objects.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.25506.2.53.1.1.7.1.3
hh3cTunnelVxlanIfLocalAddr The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.7.1.4
hh3cTunnelVxlanIfRemoteAddr The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.7.1.5
hh3cTunnelVxlanIfStatus The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable obj…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.53.1.1.7.1.6

Total number of a particular method tunnel.

hh3cTunnelTotalNumEntry row .1.3.6.1.4.1.25506.2.53.1.1.10.1

Total number of a particular method tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelEncapsMethod The encapsulation method used by the tunnel.	Hh3cTunnelType Type Values: 1 other 2 direct 3 gre 4 minimal 5 l2tp 6 pptp 7 l2f 8 udp 9 atmp 10 msdp 11 sixToFour 12 sixOverFour 13 isatap 14 teredo 35 tunnelModeReserve 36 tunnelModeIPv4Gre 37 tunnelModeIPv6Gre 38 tunnelModeIPv4IPv4 39 tunnelModeIPv4IPv6Config 40 tunnelModeIPv4IPv6Auto 41 tunnelModeIPv4IPv66to4 42 tunnelModeIPv4IPv6Isatap 43 tunnelModeIPv6IPv4 44 tunnelModeIPv6IPv6 45 tunnelModeIPv4UdpDVPN 46 tunnelModeIPv4GreDVPN 47 tunnelModeIPv6UdpDVPN 48 tunnelModeIPv6GreDVPN 49 tunnelModeCrLsp 50 tunnelModeMax 51 tunnelModeIPv4UdpVxlan 52 tunnelModeIPv6UdpVxlan 53 tunnelModeIPv4NVGRE 54 tunnelModeIPv6NVGRE	.1.3.6.1.4.1.25506.2.53.1.1.10.1.1
hh3cTunnelTotalNum Total number of a particular method tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.25506.2.53.1.1.10.1.2

The (conceptual) table containing information on configured Nvgre-Tunnel.

hh3cTunnelNvgreIfEntry row .1.3.6.1.4.1.25506.2.53.1.1.11.1

An entry (conceptual row) containing the information on a
particular configured Nvgre-Tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelNvgreIfTunnNum Tunnel number. An identifier used to distinguish between multiple tunnels.	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.11.1.1
hh3cTunnelNvgreTunnIfIndex A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.25506.2.53.1.1.11.1.2
hh3cTunnelNvgreIfAddressType The type of address in the corresponding hh3cTunnelNvgreIfLocalAddr and hh3cTunnelNvgreIfRemoteAddr objects.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.25506.2.53.1.1.11.1.3
hh3cTunnelNvgreIfLocalAddr The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.11.1.4
hh3cTunnelNvgreIfRemoteAddr The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header).	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.11.1.5
hh3cTunnelNvgreIfStatus The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable obj…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.25506.2.53.1.1.11.1.6

The (conceptual) table containing information on tunnels.

hh3cTunnelDestinationEntry row .1.3.6.1.4.1.25506.2.53.1.1.12.1

An entry (conceptual row) containing the information on a
particular tunnel.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelDestinationDstAddr Destination address of a tunnel.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.12.1.1
hh3cTunnelDestinationDstType Type of the destination address.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.25506.2.53.1.1.12.1.2
hh3cTunnelDestinationTunNum Tunnel number, an identifier used to distinguish between multiple tunnels.	Integer32	.1.3.6.1.4.1.25506.2.53.1.1.12.1.3
hh3cTunnelDestinationTunIfindex A unique value greater than zero, for each interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.25506.2.53.1.1.12.1.4

The table contains GRE P2MP tunnel mapping statistics.

hh3cTunnelGrep2mpStatsEntry row .1.3.6.1.4.1.25506.2.53.1.1.13.1

GRE P2MP tunnel mapping statistics entry.

Indexes

No indexes recorded

Column	Syntax	OID
hh3cTunnelGrep2mpStatsTunnelNo Tunnel interfacenumber.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.53.1.1.13.1.1
hh3cTunnelGrep2mpStatsVrf VPN instance index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.53.1.1.13.1.2
hh3cTunnelGrep2mpStatsVPCID VPC ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.25506.2.53.1.1.13.1.3
hh3cTunnelGrep2mpStatsBraAddr Branch network IP address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.13.1.4
hh3cTunnelGrep2mpStatsBraMask Branch network mask.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.25506.2.53.1.1.13.1.5
hh3cTunnelGrep2mpStatsAddrType Type of address in the corresponding hh3cTunnelGrep2mpStatsBraAddr and hh3cTunnelGrep2mpStatsBraMask objects.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.25506.2.53.1.1.13.1.6
hh3cTunnelGrep2mpStatsDestAddr Tunnel destination address.	INET-ADDRESS-MIBInetAddressIPv4 Type Constraints: range: 4	.1.3.6.1.4.1.25506.2.53.1.1.13.1.7
hh3cTunnelGrep2mpStatsInPkts Total number of IP datagrams received.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.25506.2.53.1.1.13.1.8
hh3cTunnelGrep2mpStatsInOctets Total number of octets received in IP datagrams.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.25506.2.53.1.1.13.1.9
hh3cTunnelGrep2mpStatsInDis The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.25506.2.53.1.1.13.1.10
hh3cTunnelGrep2mpStatsOutPkts Total number IP datagrams sent.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.25506.2.53.1.1.13.1.11
hh3cTunnelGrep2mpStatsOutOctets Total number of octets in IP datagrams sent.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.25506.2.53.1.1.13.1.12
hh3cTunnelGrep2mpStatsOutDis The number of output IP datagrams which no problem was encountered to prevent their transmission to their destination, but were discarded .	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.25506.2.53.1.1.13.1.13