HH3C-STORAGE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
26

hh3cDeuTable

table
.1.3.6.1.4.1.25506.10.1.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cDeuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-STORAGE-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-STORAGE-MIB::hh3cDeuTable' 
This table contains some information of a particular DEU(Disk Enclosure
Unit).
hh3cDeuEntry row .1.3.6.1.4.1.25506.10.1.1.2.1.1
An entry containing management information applicable
to a particular DEU.
Indexes
Column Syntax OID
hh3cDeuIndex
This object identifies the index of hh3cDeuTable. The DEU identified
by a particular value of this index is the same object as identified
by the same value of entPhysicalIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.1.1.1
hh3cDeuIDLed
This object identifies the state of storage DEU's led.
HH3C-STORAGE-REF-MIBHh3cStorageLedStateTyper/w
Type Values:
1off
2on
3blink
 .1.3.6.1.4.1.25506.10.1.1.2.1.1.2
hh3cDeuDiskScan
The operation of scanning the table. When the value of this object
is set to 'action', the operation of disk scanning is touched off.
HH3C-STORAGE-REF-MIBHh3cStorageActionTyper/w
Type Values:
1action
2invalid
 .1.3.6.1.4.1.25506.10.1.1.2.1.1.3

hh3cStorageInterfaceTable

table
.1.3.6.1.4.1.25506.10.1.1.2.2 · 1 row entry · 4 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cStorageInterfaceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-STORAGE-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-STORAGE-MIB::hh3cStorageInterfaceTable' 
This table describes the interface information of the network.
hh3cStorageInterfaceEntry row .1.3.6.1.4.1.25506.10.1.1.2.2.1
An entry containing management information applicable
to a particular interface.
Indexes
Column Syntax OID
hh3cStorageInterfaceIndex
This object identifies the index of Hh3cStorageInterfaceEntry. The
interface identified by this index is the same interface as identified
by the same value of ifIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.2.1.1
hh3cStorageInterfaceGateway
This object identifies the gateway address of interface.
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.10.1.1.2.2.1.2
hh3cStorageInterfaceGatewayType
This object identifies the gateway address type of interface.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.25506.10.1.1.2.2.1.3
hh3cStorageInterfaceMTU
This object identifies the MTU of interface.
Enumerationr/w
Enumerated Values:
1500mtu1
9000mtu2
 .1.3.6.1.4.1.25506.10.1.1.2.2.1.4

hh3cBondingTable

table
.1.3.6.1.4.1.25506.10.1.1.2.3 · 1 row entry · 2 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cBondingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-STORAGE-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-STORAGE-MIB::hh3cBondingTable' 
This table describes the information of the Bonding interface.
hh3cBondingEntry row .1.3.6.1.4.1.25506.10.1.1.2.3.1
An entry containing management information applicable to a particular
Bonding interface.
Indexes
Column Syntax OID
hh3cBondingIndex
This object identifies the index of hh3cBondingEntry. The interface
identified by this index is the same interface as identified by the
same value of ifIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.3.1.1
hh3cBondingPortList
An entry contains management information applicable to a particular bonding interface.
Every two bytes describe the ifIndex of an interface, and an interface belongs
to one bonding group only. An interface should be del…
OctetStringr/w .1.3.6.1.4.1.25506.10.1.1.2.3.1.2

hh3cScsiAdapterTable

table
.1.3.6.1.4.1.25506.10.1.1.2.4 · 1 row entry · 8 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cScsiAdapterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-STORAGE-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-STORAGE-MIB::hh3cScsiAdapterTable' 
This table containing some information of the SCSI(Small Computer
System interface) adapter.
hh3cScsiAdapterEntry row .1.3.6.1.4.1.25506.10.1.1.2.4.1
An entry containing management information applicable
to a particular SCSI adapter.
Indexes
Column Syntax OID
hh3cAdapterNumber
This object identifies the index of the adapter .
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.4.1.1
hh3cAdapterDesc
This object describes some information of the adapter.
OctetString .1.3.6.1.4.1.25506.10.1.1.2.4.1.2
hh3cAdapterType
This object identifies the type of adapter. If the value of this
object is not equal to 'fc', the associated object(such as hh3cFcAdapterMode,
hh3cFcAdapterIWWPNs,hh3cFcAdapterTWWPNs,hh3cFcAdapterPortState,hh3cFcAdapter…
Enumeration
Enumerated Values:
1scsi
2fc
 .1.3.6.1.4.1.25506.10.1.1.2.4.1.3
hh3cFcAdapterMode
This object identifies the mode type of adapter.
Enumeration
Enumerated Values:
1initiator
2target
3dual
 .1.3.6.1.4.1.25506.10.1.1.2.4.1.4
hh3cFcAdapterInitiatorWwpnName
This object describes the FC's adapter WWPN(World Wide Port
Name) numbers.
HH3C-STORAGE-REF-MIBHh3cWwpnListType .1.3.6.1.4.1.25506.10.1.1.2.4.1.5
hh3cFcAdapterTargetWwpnName
This object describes the FC's target WWPN numbers.
HH3C-STORAGE-REF-MIBHh3cWwpnListType .1.3.6.1.4.1.25506.10.1.1.2.4.1.6
hh3cFcAdapterPortState
This object identifies the state of adapter's interface.
Enumeration
Enumerated Values:
1linkup
2linkdown
 .1.3.6.1.4.1.25506.10.1.1.2.4.1.7
hh3cFcAdapterModeSwitch
This object identifies if the adapter work on a target mode.
HH3C-STORAGE-REF-MIBHh3cStorageEnableStater/w
Type Values:
1enable
2disable
 .1.3.6.1.4.1.25506.10.1.1.2.4.1.8

hh3cExtVoltageTable

table
.1.3.6.1.4.1.25506.10.1.1.2.5 · 1 row entry · 9 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cExtVoltageTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-STORAGE-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-STORAGE-MIB::hh3cExtVoltageTable' 
This table contains some entity extend information of the voltage.
hh3cExtVoltageEntry row .1.3.6.1.4.1.25506.10.1.1.2.5.1
An entry containing management information applicable to the voltage.
Indexes
Column Syntax OID
hh3cExtVoltagePhysicalIndex
This object identifies the entity index of voltage.
ENTITY-MIBPhysicalIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.5.1.1
hh3cExtVoltagePhysicalName
This object identifies the entity name of voltage.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.25506.10.1.1.2.5.1.2
hh3cExtVoltage
The voltage for the entity.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.5.1.3
hh3cExtVoltageLowThreshold
The low-threshold for the voltage.
When voltage is lower than low-threshold, a notification will be
sent.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.5.1.4
hh3cExtVoltageHighThreshold
The high-threshold for the voltage.
When voltage is higher than high-threshold, a notification will be
sent.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.5.1.5
hh3cExtCriticalVoltageLowThreshold
The critical low threshold for voltage.
If the voltage is lower too much than the entity needs,
the entity will halt.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.5.1.6
hh3cExtCriticalVoltageHighThreshold
The critical high threshold for voltage.
If the voltage is higher too much than the entity needs,
the entity will halt.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.5.1.7
hh3cExtShutdownVoltageLowThreshold
The voltage is lower than the critical low threshold.
If the voltage is lower too much than the entity needs,
the entity halts now.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.5.1.8
hh3cExtShutdownVoltageHighThreshold
The voltage is higher than the critical high threshold.
If the voltage is higher too much than the entity needs,
the entity halts now.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.10.1.1.2.5.1.9