HH3C-SMLK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
18

hh3cSmlkGroupTable

table
.1.3.6.1.4.1.25506.2.147.1.1 · 1 row entry · 9 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cSmlkGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-SMLK-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-SMLK-MIB::hh3cSmlkGroupTable' 
A list of entries of a smart link group.
hh3cSmlkGroupEntry row .1.3.6.1.4.1.25506.2.147.1.1.1
A list of parameters that describe a smart link group.
Indexes
Column Syntax OID
hh3cSmlkGroupID
An index that uniquely identifies an entry in the smart link
group table.
Integer32
Constraints:
range: 1-256
 .1.3.6.1.4.1.25506.2.147.1.1.1.1
hh3cSmlkDeviceID
Device ID of a smart link group.
The device ID is the bridge MAC of the device.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.25506.2.147.1.1.1.2
hh3cSmlkPreemptionMode
Preemption mode of a smart link group.
Enumerationr/w
Enumerated Values:
1none
2role
3speed
 .1.3.6.1.4.1.25506.2.147.1.1.1.3
hh3cSmlkSpeedThreshold
Speed threshold for a smart link group in speed mode.
This object is valid only when the value of hh3cSmlkPreemptionMode
is 'speed'.
Integer32r/w
Constraints:
range: 0-10000
 .1.3.6.1.4.1.25506.2.147.1.1.1.4
hh3cSmlkPreemptionDelay
Preemption delay for a smart link group, in the range of 0 to 300
seconds.
Integer32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.25506.2.147.1.1.1.5
hh3cSmlkControlVlanID
Index of the control VLAN specified for a smart link group.
The value 65535 indicates that the control VLAN has not been
configured.
Integer32r/w
Constraints:
range: 1-4094
range: 65535-65535
 .1.3.6.1.4.1.25506.2.147.1.1.1.6
hh3cSmlkInstanceListLow
Each octet contained in this value specifies an eight-instance
group, with the first octet specifying instances 0 through 7,
the second octet specifying instances 8 through 15, and so on.
Within each octet, the most sig…
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.25506.2.147.1.1.1.7
hh3cSmlkInstanceListHigh
Each octet contained in this value specifies an eight-instance
group, with the first octet specifying instances 2048 through
2055, the second octet specifying instances 2056 through 2063,
and so on. Within each octet, t…
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.25506.2.147.1.1.1.8
hh3cSmlkGroupRowStatus
This object is responsible for managing creation,
deletion, and modification of rows. The rows support active
status, CreatAndGo, and destroy operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.147.1.1.1.9

hh3cSmlkPortTable

table
.1.3.6.1.4.1.25506.2.147.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cSmlkPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-SMLK-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-SMLK-MIB::hh3cSmlkPortTable' 
A list of port entries of a smart link group.
hh3cSmlkPortEntry row .1.3.6.1.4.1.25506.2.147.1.2.1
A list of parameters that describe a port to be added to a smart
link group.
Indexes
Column Syntax OID
hh3cSmlkPortIfIndex
IfIndex of a port in a smart link group.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.25506.2.147.1.2.1.1
hh3cSmlkPortRole
Role of a port in a smart link group.
Enumerationr/w
Enumerated Values:
1primary
2secondary
 .1.3.6.1.4.1.25506.2.147.1.2.1.2
hh3cSmlkPortStatus
Status of a port in a smart link group.
Enumeration
Enumerated Values:
1down
2active
3standby
 .1.3.6.1.4.1.25506.2.147.1.2.1.3
hh3cSmlkFlushCount
Number of transmitted flush messages.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.25506.2.147.1.2.1.4
hh3cSmlkLastFlushTime
Time when the last flush message was transmitted.
SNMPv2-TCDateAndTime
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.25506.2.147.1.2.1.5
hh3cSmlkPortRowStatus
This object is responsible for managing creation,
deletion, and modification of rows. The rows support active
status, CreatAndGo, and destroy operations.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.25506.2.147.1.2.1.6

hh3cSmlkFlushEnableTable

table
.1.3.6.1.4.1.25506.2.147.1.3 · 1 row entry · 3 columns
Open in standard view
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cSmlkFlushEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-SMLK-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-SMLK-MIB::hh3cSmlkFlushEnableTable' 
A list of ports on which flush message receiving is enabled.
hh3cSmlkFlushEnableEntry row .1.3.6.1.4.1.25506.2.147.1.3.1
A list of parameters that describe a port on which flush message
receiving is enabled.
Indexes
Column Syntax OID
hh3cSmlkIfIndex
IfIndex of a port on which flush message receiving is enabled.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.25506.2.147.1.3.1.1
hh3cSmlkControlVlanListLow
Specifies the control VLANs used for receiving flush messages.
The VLAN ID range, described by bitmap, is from 1 to
2048. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VLANs…
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.25506.2.147.1.3.1.2
hh3cSmlkControlVlanListHigh
Specifies the control VLANs used for receiving flush messages.
The VLAN ID range, described by bitmap, is from 2049 to
4094. The length of bitmap is 256 in bytes. Each octet
within this value specifies a set of eight VL…
OctetStringr/w
Constraints:
range: 256-256
 .1.3.6.1.4.1.25506.2.147.1.3.1.3