HH3C-RPR-MIB
This MIB manages RPR(Resilient Packet Ring)interfaces by
providing an operational table which controls parameters
of each RPR interface and reports alarm conditions.
A RPR ring is composed of two fiber rings: Outer and Inner.
- Source file
HH3C-RPR-MIB- Last revised
- Identity
hh3cRpr- Base OID
1.3.6.1.4.1.25506.2.60
Imported Objects
| HH3C-OID-MIB | hh3cCommon |
| IEEE-802DOT17-RPR-MIB | rprTopoImageEntry rprTopoImageInetAddress rprTopoImageMacAddress |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the hh3c MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HH3C-RPR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HH3C-RPR-MIB::hh3cRpr'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-RPR-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-RPR-MIB::hh3cRpr'
Objects (116)
Showing 116 of 116 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.25506.2.60 |
||
.1.3.6.1.4.1.25506.2.60.1 |
||
.1.3.6.1.4.1.25506.2.60.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.1.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.1.1.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.1.1.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.1.1.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.10 |
||
.1.3.6.1.4.1.25506.2.60.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.2.1 |
||
.1.3.6.1.4.1.25506.2.60.1.2.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.2.1.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.2.1.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.2.1.1.5 |
||
.1.3.6.1.4.1.25506.2.60.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.3.1 |
||
.1.3.6.1.4.1.25506.2.60.1.3.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.3.1.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.3.1.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.3.1.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.3.1.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.3.2 |
||
.1.3.6.1.4.1.25506.2.60.1.3.2.1 |
||
.1.3.6.1.4.1.25506.2.60.1.3.2.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.3.2.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.3.2.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.3.2.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3.1 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3.1.5 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3.1.6 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3.1.7 |
||
.1.3.6.1.4.1.25506.2.60.1.3.3.1.8 |
||
.1.3.6.1.4.1.25506.2.60.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.4.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.1.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.1.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.4.1.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.4.1.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.4.1.1.5 |
||
.1.3.6.1.4.1.25506.2.60.1.4.1.1.6 |
||
.1.3.6.1.4.1.25506.2.60.1.4.2 |
||
.1.3.6.1.4.1.25506.2.60.1.4.2.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.2.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.2.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.4.2.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.4.2.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.4.3 |
||
.1.3.6.1.4.1.25506.2.60.1.4.3.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.3.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.3.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.4.3.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.4.3.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.4.4 |
||
.1.3.6.1.4.1.25506.2.60.1.4.4.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.4.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.4.1.2 |
||
|
Enumeration
|
.1.3.6.1.4.1.25506.2.60.1.4.4.1.3 |
|
.1.3.6.1.4.1.25506.2.60.1.4.4.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.4.4.1.5 |
||
.1.3.6.1.4.1.25506.2.60.1.4.5 |
||
.1.3.6.1.4.1.25506.2.60.1.4.5.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.5.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.5.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.4.5.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.4.5.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.4.5.1.5 |
||
.1.3.6.1.4.1.25506.2.60.1.4.6 |
||
.1.3.6.1.4.1.25506.2.60.1.4.6.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.6.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.4.6.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.4.6.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.5 |
||
.1.3.6.1.4.1.25506.2.60.1.5.1 |
||
.1.3.6.1.4.1.25506.2.60.1.5.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.5.1.1.1 |
||
|
Bits
|
.1.3.6.1.4.1.25506.2.60.1.5.1.1.2 |
|
.1.3.6.1.4.1.25506.2.60.1.6 |
||
.1.3.6.1.4.1.25506.2.60.1.6.1 |
||
.1.3.6.1.4.1.25506.2.60.1.6.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.6.1.1.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.25506.2.60.1.6.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.25506.2.60.1.6.1.1.3 |
|
.1.3.6.1.4.1.25506.2.60.1.6.1.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.7 |
||
.1.3.6.1.4.1.25506.2.60.1.7.1 |
||
.1.3.6.1.4.1.25506.2.60.1.7.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.7.1.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.7.1.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.7.1.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.7.1.1.4 |
||
.1.3.6.1.4.1.25506.2.60.1.8 |
||
.1.3.6.1.4.1.25506.2.60.1.8.1 |
||
.1.3.6.1.4.1.25506.2.60.1.8.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.8.1.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.8.1.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.8.1.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.8.1.1.4 |
||
|
Integer32
|
.1.3.6.1.4.1.25506.2.60.1.8.1.1.5 |
|
.1.3.6.1.4.1.25506.2.60.1.8.1.1.6 |
||
.1.3.6.1.4.1.25506.2.60.1.8.1.1.7 |
||
.1.3.6.1.4.1.25506.2.60.1.8.1.1.8 |
||
.1.3.6.1.4.1.25506.2.60.1.8.1.1.9 |
||
.1.3.6.1.4.1.25506.2.60.1.9 |
||
.1.3.6.1.4.1.25506.2.60.1.9.1 |
||
.1.3.6.1.4.1.25506.2.60.1.9.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.9.1.1.1 |
||
.1.3.6.1.4.1.25506.2.60.1.9.1.1.2 |
||
.1.3.6.1.4.1.25506.2.60.1.9.1.1.3 |
||
.1.3.6.1.4.1.25506.2.60.1.9.1.1.4 |
Dependencies (12) 7 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- RFC1155-SMIrfc
- HH3C-OID-MIBhh3c
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- HC-PerfHist-TC-MIBrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- IEEE-802DOT17-RPR-MIBrfc
- HH3C-RPR-MIBhh3cselected
Type Definitions (2)
| Enumeration |
ringlet0(1)ringlet1(2) |
|
| Enumeration |
classC(1)classB(2)classA1(3)classA0(4) |
Notifications / Traps (14)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.25506.2.60.1.10.1 |
The topology openRing trap indicates that the RPR ring is opened.
|
|
.1.3.6.1.4.1.25506.2.60.1.10.10 |
The exceeded max reserved rate trap indicates that the rate
on the ringlet exceeded the max reserved rate. The operator can configure reserved rate for every station, but the sum of all stations' reserved rate of each RPR ringlet can't exceed maximum. |
|
.1.3.6.1.4.1.25506.2.60.1.10.11 |
The exceeded max station number trap indicates that the number
of the stations on the ring exceeded the max station number. |
|
.1.3.6.1.4.1.25506.2.60.1.10.12 |
The miscabling trap indicates that the miscabling event occurred.
|
|
.1.3.6.1.4.1.25506.2.60.1.10.13 |
The back pressure trap indicates that the backpressure is generated
on the ringlet. That is the data flow on the ringlet exceeded the range of rate-limit configured. |
|
.1.3.6.1.4.1.25506.2.60.1.10.14 |
The back pressure over trap indicates that the backpressure is
disappeared on the ringlet. |
|
.1.3.6.1.4.1.25506.2.60.1.10.2 |
The topology openRing trap indicates that the RPR ring is closed.
|
|
.1.3.6.1.4.1.25506.2.60.1.10.3 |
The topology inconsistent trap indicates that the topology of
RPR is inconsistent. |
|
.1.3.6.1.4.1.25506.2.60.1.10.4 |
The topology instability trap indicates that the topology of
RPR is instability. |
|
.1.3.6.1.4.1.25506.2.60.1.10.5 |
The duplicate MAC address trap indicates that the mac address
of the station on the ring is dulplicate. That means there is the same MAC address between two stations on the ring. |
|
.1.3.6.1.4.1.25506.2.60.1.10.6 |
The dulplicate IP address trap indicates that the IP address of
the station on the ring is dulplicate. That means there is the same IP address between two stations on the ring. |
|
.1.3.6.1.4.1.25506.2.60.1.10.7 |
The incomplete LRTT trap indicates that LRTT is not completed.
|
|
.1.3.6.1.4.1.25506.2.60.1.10.8 |
The protection configuration inconsistent trap indicates that
the configuration of protection mode on the ring is inconsistent. That is one station is configured steer mode while the other is configured wrap mode. |
|
.1.3.6.1.4.1.25506.2.60.1.10.9 |
The jumbo configuration inconsistent trap indicates that the
configuration of jumbo mode on the ring is inconsistent. That is one station supports jumbo frame while the other doesn't support jumbo frame. |