HH3C-RMON-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
3
Rows
3
Columns
18
.1.3.6.1.4.1.25506.8.4.4.1 · 1 row entry · 15 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cprialarmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-RMON-EXT-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-RMON-EXT-MIB::hh3cprialarmTable'
A list of alarm entries.
hh3cprialarmEntry row .1.3.6.1.4.1.25506.8.4.4.1.1
A list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8
Column Syntax OID
An index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.25506.8.4.4.1.1.1
The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be s…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.8.4.4.1.1.2
The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.25506.8.4.4.1.1.3
RFC1213-MIBDisplayStringr/w .1.3.6.1.4.1.25506.8.4.4.1.1.4
The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directl…
Enumerationr/w
Enumerated Values:
1absoluteValue
2deltaValue
3speedValue
.1.3.6.1.4.1.25506.8.4.4.1.1.5
The value of the statistic during the last sampling
period. For example, if the sample type is deltaValue,
this value will be the difference between the samples
at the beginning and end of the period. If the sample
ty…
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.8.4.4.1.1.6
The alarm that may be sent when this entry is first
set to valid. If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and alarmStartupAlarm is equal to
risingAlarm(1) or r…
Enumerationr/w
Enumerated Values:
1risingAlarm
2fallingAlarm
3risingOrFallingAlarm
.1.3.6.1.4.1.25506.8.4.4.1.1.7
A threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this threshold, a single event will be generat…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.8.4.4.1.1.8
A threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generat…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.8.4.4.1.1.9
The index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.25506.8.4.4.1.1.10
The index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If ther…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.25506.8.4.4.1.1.11
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.25506.8.4.4.1.1.12
Enumerationr/w
Enumerated Values:
1forever
2during
.1.3.6.1.4.1.25506.8.4.4.1.1.13
The entity that configured this entry and is therefore
using the resources assigned to it.
IF-MIBOwnerStringr/w
Type Constraints:
range: 0..255
Description:
This data type is used to model an administratively
assigned name of the owner of a resource. This information
is taken from the NVT ASCII character set. It is suggested
that this name contain one or more of the follo…
.1.3.6.1.4.1.25506.8.4.4.1.1.14
The status of this alarm entry.
RMON-MIBEntryStatusr/w
Type Values:
1valid
2createRequest
3underCreation
4invalid
.1.3.6.1.4.1.25506.8.4.4.1.1.15
.1.3.6.1.4.1.25506.8.4.5 · 1 row entry · 2 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3crmonEnableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-RMON-EXT-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-RMON-EXT-MIB::hh3crmonEnableTable'
A list of enable rmon entries.
hh3crmonEnableEntry row .1.3.6.1.4.1.25506.8.4.5.1
A list of parameters that set up a hh3crmonEnableTable
Column Syntax OID
Specify an interface to enable rmon.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.25506.8.4.5.1.1
Specify an interface to enable rmon.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.25506.8.4.5.1.2
.1.3.6.1.4.1.25506.8.4.6 · 1 row entry · 1 columns
Uses the hh3c variant from /opt/observium/mibs/hh3c.
Command help
Walk hh3cTrapDestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-RMON-EXT-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-RMON-EXT-MIB::hh3cTrapDestTable'
Defines the trap destination Extend Table for providing, via SNMP,
the capability of configure a trap dest.
hh3cTrapDestEntry row .1.3.6.1.4.1.25506.8.4.6.1
Defines an entry in the hh3cTrapDestTable.
Indexes
No indexes recorded
Column Syntax OID
The version for trap destination.
This object may not be modified if the associated
trapDestStatus object is equal to active(1).
Enumerationr/w
Enumerated Values:
1snmpv1
2snmpv2
3snmpv3andauthen
4snmpv3andnoauthen
5snmpv3andpriv
.1.3.6.1.4.1.25506.8.4.6.1.1