HH3C-RBM-MIB
The MIB is designed to manage Rbm products.
- Source file
HH3C-RBM-MIB- Last revised
- Identity
hh3cRbm- Base OID
1.3.6.1.4.1.25506.2.187
Imported Objects
| HH3C-OID-MIB | hh3cCommon |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) |
Net-SNMP examples using the hh3c MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HH3C-RBM-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HH3C-RBM-MIB::hh3cRbm'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HH3C-RBM-MIB' -M '/opt/observium/mibs/hh3c:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HH3C-RBM-MIB::hh3cRbm'
Objects (7)
Showing 7 of 7 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.25506.2.187 |
||
.1.3.6.1.4.1.25506.2.187.1 |
||
.1.3.6.1.4.1.25506.2.187.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.25506.2.187.1.1.1 |
|
|
OctetString
|
.1.3.6.1.4.1.25506.2.187.1.1.2 |
|
.1.3.6.1.4.1.25506.2.187.1.2 |
||
.1.3.6.1.4.1.25506.2.187.1.2.0 |
Dependencies (3) 2 direct · 1 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- RFC1155-SMIrfc
- HH3C-OID-MIBhh3c
- SNMPv2-SMIrfc
- HH3C-RBM-MIBhh3cselected
Notifications / Traps (7)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.25506.2.187.1.2.0.1 |
This notification is generated when RBM keepalive channel connected.
|
|
.1.3.6.1.4.1.25506.2.187.1.2.0.2 |
This notification is generated when RBM keepalive channel disconnected.
|
|
.1.3.6.1.4.1.25506.2.187.1.2.0.3 |
This notification is generated when RBM running status changes(0:new-state = Active,1:new-state = Standby).
|
|
.1.3.6.1.4.1.25506.2.187.1.2.0.4 |
When the result of RBM configuration consistency check is inconsistent, it checks the result of the last check.
If the result of the last check is also inconsistent, this notification is generated. |
|
.1.3.6.1.4.1.25506.2.187.1.2.0.5 |
After the RBM is linked with the MAD,it responds to the MAD event.
When it receives a dual-primary conflict reported by the MAD, it adds this notification to the original processing logic. |
|
.1.3.6.1.4.1.25506.2.187.1.2.0.6 |
After the RBM is linked with the MAD,it responds to the MAD event.
When receiving the MAD report of dual-primary conflict recovery, this notification is added to the original processing logic. |
|
.1.3.6.1.4.1.25506.2.187.1.2.0.7 |
After the heartbeat cable is connected,
if the RBM configuration is a dual management master or dual management backup configuration or is not configured with data-channel,this notification is sent every 30s. |
